xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
ee79ccd9ea8617220783ace007d722ed3815e00f
android_kernel_xiaomi_sm8450/drivers/net/wireless/ath/ath9k
History
Sujith Manoharan ee79ccd9ea ath9k: Store the chip chainmask in HW capabilities 
Cc: Miaoqing Pan <miaoqing@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17 15:32:16 -05:00
..
ahb.c
ath9k: Initialize channel context ops on ahb probe
2014-07-29 10:32:57 -04:00
ani.c
ath9k_hw: do not lower ANI setting below default on AR913x
2014-04-30 11:39:54 -04:00
ani.h
ath9k_hw: tweak noise immunity thresholds for older chipsets
2014-03-03 15:35:55 -05:00
antenna.c
ath9k: add support for reporting per-chain signal strength
2013-12-18 15:23:19 -05:00
ar953x_initvals.h
ath9k: Update QCA953x initvals
2014-11-17 15:32:15 -05:00
ar955x_1p0_initvals.h
ath9k: Update AR955x initvals
2014-10-27 14:16:17 -04:00
ar5008_initvals.h
ath9k: fix column header comments for some initval arrays
2013-01-07 15:16:53 -05:00
ar5008_phy.c
ath9k: set pulse_rssi threshold to 15
2014-10-30 15:24:49 -04:00
ar9001_initvals.h
ath9k: fix column header comments for some initval arrays
2013-01-07 15:16:53 -05:00
ar9002_calib.c
ath9k_hw: start initial NF calibration after PA calibration on <AR9003
2014-10-27 14:16:18 -04:00
ar9002_hw.c
ath9k: Register supported HW hang checks
2014-01-03 15:36:57 -05:00
ar9002_initvals.h
ath9k: Enable WoW only for AR9462
2013-06-03 15:55:46 -04:00
ar9002_mac.c
ath9k: fix getting tx duration for dynack
2014-09-30 13:17:48 -04:00
ar9002_phy.c
ath9k: For AR9271 chipsets, set count = 0 for endless samples.
2014-11-11 16:31:14 -05:00
ar9002_phy.h
ath9k: Program HW for WB195 diversity
2013-08-05 14:52:43 -04:00
ar9003_2p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h
ath9k: Use a separate TX gain table for WZR-HP-G450H
2013-12-09 15:37:58 -05:00
ar9003_calib.c
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
ar9003_eeprom.c
ath9k_hw: fix XPABIASLEVEL settings for AR9531
2014-06-25 15:40:38 -04:00
ar9003_eeprom.h
ath9k: Update BaseExtension_1 eeprom structure
2013-12-18 15:23:44 -05:00
ar9003_hw.c
ath9k: Use new QCA953x initvals
2014-11-17 15:32:15 -05:00
ar9003_mac.c
ath9k: fix getting tx duration for dynack
2014-09-30 13:17:48 -04:00
ar9003_mac.h
ath9k: Fix descriptor length for AR9462
2012-02-27 14:05:44 -05:00
ar9003_mci.c
ath9k: Use bitops for calibration flags
2013-09-26 15:13:47 -04:00
ar9003_mci.h
ath9k: Add new BT profile info A2DP_Voice
2012-10-29 15:19:30 -04:00
ar9003_paprd.c
ath9k_hw: fix PA predistortion miscalibration
2013-05-29 15:22:42 -04:00
ar9003_phy.c
ath9k: set pulse_rssi threshold to 15
2014-10-30 15:24:49 -04:00
ar9003_phy.h
ath9k: Fix regulatory compliance
2014-01-03 15:37:01 -05:00
ar9003_rtt.c
ath9k: Fix PeakDetect calibration for AR9462
2013-09-26 15:13:47 -04:00
ar9003_rtt.h
ath9k_hw: make support for PC-OEM cards optional
2014-10-27 14:16:18 -04:00
ar9003_wow.c
ath9k: Fix wow.c compilation
2013-12-02 14:24:53 -05:00
ar9330_1p1_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9340_initvals.h
ath9k_hw: fix worse EVM for 11b rates
2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h
ath9k: Fix ETSI compliance for AR9462 2.0
2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h
ath9k: Remove duplicate initvals for AR9462 v2.1
2013-12-02 14:25:02 -05:00
ar9485_initvals.h
ath9k: Identify duplicate AR9485 initvals
2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h
ath9k: Identify duplicate AR9565 v1.0 initvals
2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h
ath9k: Add initvals for AR9565 1.1
2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h
ath9k: Update AR9580 initvals
2014-10-27 14:16:17 -04:00
ath9k.h
ath9k: Fix LED configuration
2014-11-17 15:32:16 -05:00
beacon.c
ath9k: Fix sequence number assignment
2014-10-08 15:24:15 -04:00
btcoex.c
ath9k_hw: clean up generic timer code
2013-12-18 15:23:22 -05:00
btcoex.h
ath9k: stomp audio profiles on weak signal strength
2012-11-21 14:16:01 -05:00
calib.c
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
calib.h
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
channel.c
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
common-beacon.c
Revert "ath9k: Calculate sleep duration"
2014-09-11 14:17:20 -04:00
common-beacon.h
ath9k: move ath9k_beacon_config_ap common
2014-03-17 13:13:08 -04:00
common-debug.c
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-debug.h
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-init.c
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common-init.h
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common-spectral.c
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
common-spectral.h
ath9k: common-spectral: don't depend from ATH9K_DEBUGFS
2014-11-17 15:32:14 -05:00
common.c
ath9k|ath9k_htc: Seperate the software crypto flag for Tx and Rx
2014-11-17 15:32:15 -05:00
common.h
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
debug_sta.c
ath9k: remove tid->paused flag
2014-04-30 11:42:35 -04:00
debug.c
ath9k: fix misc debugfs when not using chan context
2014-11-17 15:32:13 -05:00
debug.h
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
dfs_debug.c
ath9k: dfs_debug fix possible NULL dereference
2013-11-11 14:42:43 -05:00
dfs_debug.h
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.c
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.h
ath9k/ath: move dfs pattern detector to ath
2013-10-18 14:03:54 -04:00
dynack.c
ath9k: fix getting tx duration for dynack
2014-09-30 13:17:48 -04:00
dynack.h
ath9k: add dynamic ACK timeout estimation
2014-09-16 16:18:30 -04:00
eeprom_4k.c
ath9k_hw: simplify spur channel handling
2013-12-18 15:23:27 -05:00
eeprom_9287.c
ath9k_hw: simplify spur channel handling
2013-12-18 15:23:27 -05:00
eeprom_def.c
ath9k: add support for endian swap of eeprom from platform data
2014-10-27 14:16:19 -04:00
eeprom.c
ath9k: allow to load EEPROM content via firmware API
2012-12-10 15:49:57 -05:00
eeprom.h
ath9k: use 'struct ath_hw *' as the first argument for 'ath9k_hw_nvram_read'
2012-12-10 15:49:56 -05:00
gpio.c
ath9k: Fix LED configuration
2014-11-17 15:32:16 -05:00
hif_usb.c
ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P
2014-02-12 15:36:04 -05:00
hif_usb.h
wireless: ath9k-htc: only load firmware in need
2012-09-07 15:03:36 -04:00
htc_drv_beacon.c
ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init
2014-03-17 13:13:09 -04:00
htc_drv_debug.c
ath9k_htc: add spectral scan debug interface
2014-11-11 16:31:15 -05:00
htc_drv_gpio.c
ath9k_htc: reconfigure led_gpios after resume
2013-12-18 15:23:02 -05:00
htc_drv_init.c
ath9k_htc: ath9k_htc_op_ps_wakeup() can be static
2014-11-17 15:32:14 -05:00
htc_drv_main.c
ath9k|ath9k_htc: Seperate the software crypto flag for Tx and Rx
2014-11-17 15:32:15 -05:00
htc_drv_txrx.c
ath9k_htc: process rx spectral packets
2014-11-11 16:31:15 -05:00
htc_hst.c
ath9k_htc: catch fw panic pattern
2014-02-12 15:36:03 -05:00
htc_hst.h
ath9k_htc: catch fw panic pattern
2014-02-12 15:36:03 -05:00
htc.h
ath9k_htc: remove return of value in empty definintion of ath9k_htc_deinit_debug
2014-11-11 17:12:17 -05:00
hw-ops.h
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
hw.c
ath9k: Store the chip chainmask in HW capabilities
2014-11-17 15:32:16 -05:00
hw.h
ath9k: Store the chip chainmask in HW capabilities
2014-11-17 15:32:16 -05:00
init.c
ath9k: Fix LED configuration
2014-11-17 15:32:16 -05:00
Kconfig
ath9k_hw: make support for PC-OEM cards optional
2014-10-27 14:16:18 -04:00
link.c
ath9k: restart hardware after noise floor calibration failure
2014-10-27 14:16:18 -04:00
mac.c
ath9k_hw: Abort transmission for sleeping station
2014-05-19 16:42:15 -04:00
mac.h
ath9k: fix getting tx duration for dynack
2014-09-30 13:17:48 -04:00
main.c
ath9k: Fix LED configuration
2014-11-17 15:32:16 -05:00
Makefile
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
mci.c
ath9k: Move caldata into channel context
2014-06-19 15:49:18 -04:00
mci.h
ath9k: Add new BT profile info A2DP_Voice
2012-10-29 15:19:30 -04:00
pci.c
ath9k: Fix LED configuration
2014-11-17 15:32:16 -05:00
phy.h
ath9k: Fix diversity combining for AR9285
2013-07-24 11:02:39 -04:00
recv.c
ath9k: move spectral.* to common-spectral.*
2014-11-11 16:31:14 -05:00
reg.h
ath9k: Enable TSF2 for generic HW timers
2014-11-17 15:32:16 -05:00
tx99.c
ath9k: Unify reset API
2014-10-27 14:16:14 -04:00
wmi.c
ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOO
2011-12-19 14:35:31 -05:00
wmi.h
ath9k: mark wmi_event_swba as __packed
2013-09-26 15:13:48 -04:00
wow.c
ath9k: Fix interface accounting
2014-09-09 15:27:21 -04:00
xmit.c
ath9k: Fix sequence number assignment
2014-10-08 15:24:15 -04:00