Files
android_kernel_xiaomi_sm8450/arch/arm/boot/dts/integratorcp.dts
Linus Torvalds aac59e3efc Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...
2013-11-11 16:49:45 +09:00

115 lines
2.2 KiB
Plaintext

/*
* Device Tree for the ARM Integrator/CP platform
*/
/dts-v1/;
/include/ "integrator.dtsi"
/ {
model = "ARM Integrator/CP";
compatible = "arm,integrator-cp";
chosen {
bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
};
syscon {
compatible = "arm,integrator-cp-syscon";
reg = <0xcb000000 0x100>;
};
timer0: timer@13000000 {
/* TIMER0 runs @ 25MHz */
compatible = "arm,integrator-cp-timer";
status = "disabled";
};
timer1: timer@13000100 {
/* TIMER1 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
};
timer2: timer@13000200 {
/* TIMER2 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
};
pic: pic@14000000 {
valid-mask = <0x1fc003ff>;
};
cic: cic@10000040 {
compatible = "arm,versatile-fpga-irq";
#interrupt-cells = <1>;
interrupt-controller;
reg = <0x10000040 0x100>;
clear-mask = <0xffffffff>;
valid-mask = <0x00000007>;
};
sic: sic@ca000000 {
compatible = "arm,versatile-fpga-irq";
#interrupt-cells = <1>;
interrupt-controller;
reg = <0xca000000 0x100>;
clear-mask = <0x00000fff>;
valid-mask = <0x00000fff>;
};
ethernet@c8000000 {
compatible = "smsc,lan91c111";
reg = <0xc8000000 0x10>;
interrupt-parent = <&pic>;
interrupts = <27>;
};
fpga {
/*
* These PrimeCells are at the same location and using
* the same interrupts in all Integrators, but in the CP
* slightly newer versions are deployed.
*/
rtc@15000000 {
compatible = "arm,pl031", "arm,primecell";
};
uart@16000000 {
compatible = "arm,pl011", "arm,primecell";
};
uart@17000000 {
compatible = "arm,pl011", "arm,primecell";
};
kmi@18000000 {
compatible = "arm,pl050", "arm,primecell";
};
kmi@19000000 {
compatible = "arm,pl050", "arm,primecell";
};
/*
* These PrimeCells are only available on the Integrator/CP
*/
mmc@1c000000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x1c000000 0x1000>;
interrupts = <23 24>;
max-frequency = <515633>;
};
aaci@1d000000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x1d000000 0x1000>;
interrupts = <25>;
};
clcd@c0000000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xC0000000 0x1000>;
interrupts = <22>;
};
};
};