Carolyn Wyborny e428893b7d igb: Enable hwmon data output for thermal sensors via I2C. ...

Some of our adapters have internal sensors that report thermal data.  This
patch enables reporting of that data via sysfs.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

2013-01-18 04:55:28 -08:00

..

e1000_82575.c

igb: Enable hwmon data output for thermal sensors via I2C.

2013-01-18 04:55:28 -08:00

e1000_82575.h

igb: Enable hwmon data output for thermal sensors via I2C.

2013-01-18 04:55:28 -08:00

e1000_defines.h

igb: Add support functions to access thermal data.

2013-01-18 04:55:24 -08:00

e1000_hw.h

igb: Enable hwmon data output for thermal sensors via I2C.

2013-01-18 04:55:28 -08:00

e1000_i210.c

igb: Refactoring of i210 file.

2012-12-01 03:04:12 -08:00

e1000_i210.h

igb: Updates to read nvm function for i211 device

2012-12-01 02:41:39 -08:00

e1000_mac.c

igb: Fix SerDes autoneg flow control.

2012-12-01 03:30:20 -08:00

e1000_mac.h

igb: Add function to read i211's invm version

2012-11-01 02:35:52 -07:00

e1000_mbx.c

igb: Update Copyright on all Intel copyrighted files.

2012-01-19 12:35:06 -05:00

e1000_mbx.h

igb: Update Copyright on all Intel copyrighted files.

2012-01-19 12:35:06 -05:00

e1000_nvm.c

igb: Acquire, release semaphore for writing each EEPROM page

2012-12-01 02:49:17 -08:00

e1000_nvm.h

igb: Update firmware version info for ethtool output.

2012-10-29 23:49:29 -07:00

e1000_phy.c

igb: Enable auto-crossover during forced operation on 82580 and above.

2012-10-29 23:49:11 -07:00

e1000_phy.h

igb: Clear Go Link Disconnect for 82580 and later devices

2012-11-13 14:18:14 -05:00

e1000_regs.h

igb: Add support functions to access thermal data.

2013-01-18 04:55:24 -08:00

igb_ethtool.c

igb: Unset sigdetect for SERDES loopback on 82580 and i350

2012-12-01 03:20:40 -08:00

igb_hwmon.c

igb: Enable hwmon data output for thermal sensors via I2C.

2013-01-18 04:55:28 -08:00

igb_main.c

igb: Enable hwmon data output for thermal sensors via I2C.

2013-01-18 04:55:28 -08:00

igb_ptp.c

igb: Update PTP Rx filters

2012-11-22 02:00:53 -08:00

igb.h

igb: Enable hwmon data output for thermal sensors via I2C.

2013-01-18 04:55:28 -08:00

Makefile

igb: Enable hwmon data output for thermal sensors via I2C.

2013-01-18 04:55:28 -08:00