Files
android_kernel_xiaomi_sm8450/arch/arm/boot/dts
Carlo Caione e35e26b26e arm: dts: meson: Fix IRQ trigger type for macirq
A long running stress test on a custom board shipping an AXG SoCs and a
Realtek RTL8211F PHY revealed that after a few hours the connection
speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time
the 'macirq' (eth0) IRQ would stop being triggered at all and as
consequence the GMAC IRQs never ACKed.

After a painful investigation the problem seemed to be due to a wrong
defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of
EDGE_RISING.

The change in the macirq IRQ type also solved another long standing
issue affecting this SoC/PHY where EEE was causing the network
connection to die after stressing it with iperf3 (even though much
sooner). It's now possible to remove the 'eee-broken-1000t' quirk as
well.

Fixes: 9c15795a4f ("ARM: dts: meson8b-odroidc1: ethernet support")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-10 16:20:15 -08:00
..
2018-06-26 16:22:38 +05:30
2018-06-26 16:22:38 +05:30
2018-11-05 10:14:09 +08:00
2018-12-10 10:03:08 +08:00
2018-12-10 10:03:08 +08:00
2018-11-30 15:13:33 -08:00
2018-11-29 17:07:31 +01:00