
Changes in 5.10.214 io_uring/unix: drop usage of io_uring socket io_uring: drop any code related to SCM_RIGHTS rcu-tasks: Provide rcu_trace_implies_rcu_gp() bpf: Defer the free of inner map when necessary selftests: tls: use exact comparison in recv_partial ASoC: rt5645: Make LattePanda board DMI match more precise x86/xen: Add some null pointer checking to smp.c MIPS: Clear Cause.BD in instruction_pointer_set HID: multitouch: Add required quirk for Synaptics 0xcddc device gen_compile_commands: fix invalid escape sequence warning RDMA/mlx5: Fix fortify source warning while accessing Eth segment RDMA/mlx5: Relax DEVX access upon modify commands x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault() net/iucv: fix the allocation size of iucv_path_table array parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check block: sed-opal: handle empty atoms when parsing response dm-verity, dm-crypt: align "struct bvec_iter" correctly scsi: mpt3sas: Prevent sending diag_reset when the controller is ready Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security firewire: core: use long bus reset on gap count error ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet Input: gpio_keys_polled - suppress deferred probe error for gpio ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll x86/paravirt: Fix build due to __text_gen_insn() backport do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak nbd: null check for nla_nest_start fs/select: rework stack allocation hack for clang block: add a new set_read_only method md: implement ->set_read_only to hook into BLKROSET processing md: Don't clear MD_CLOSING when the raid is about to stop aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts timekeeping: Fix cross-timestamp interpolation on counter wrap timekeeping: Fix cross-timestamp interpolation corner case decision timekeeping: Fix cross-timestamp interpolation for non-x86 wifi: ath10k: fix NULL pointer dereference in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled wifi: b43: Stop correct queue in DMA worker when QoS is disabled wifi: b43: Disable QoS for bcm4331 wifi: wilc1000: fix declarations ordering wifi: wilc1000: fix RCU usage in connect path wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work wifi: wilc1000: fix multi-vif management when deleting a vif wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir() cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value sock_diag: annotate data-races around sock_diag_handlers[family] inet_diag: annotate data-races around inet_diag_table[] bpftool: Silence build warning about calloc() af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc(). wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete wifi: iwlwifi: dbg-tlv: ensure NUL termination wifi: iwlwifi: fix EWRD table validity check net: blackhole_dev: fix build warning for ethh set but not used wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer() arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes bpf: Factor out bpf_spin_lock into helpers. bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly wireless: Remove redundant 'flush_workqueue()' calls wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit() bus: tegra-aconnect: Update dependency to ARCH_TEGRA iommu/amd: Mark interrupt as managed wifi: brcmsmac: avoid function pointer casts net: ena: Remove ena_select_queue ARM: dts: arm: realview: Fix development chip ROM compatible value ARM: dts: imx6dl-yapp4: Move phy reset into switch node ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node arm64: dts: marvell: reorder crypto interrupts on Armada SoCs ACPI: scan: Fix device check notification handling x86, relocs: Ignore relocations in .notes section SUNRPC: fix some memleaks in gssx_dec_option_array mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function wifi: rtw88: 8821c: Fix false alarm count PCI: Make pci_dev_is_disconnected() helper public for other drivers iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected igb: move PEROUT and EXTTS isr logic to separate functions igb: Fix missing time sync events Bluetooth: Remove superfluous call to hci_conn_check_pending() Bluetooth: hci_core: Fix possible buffer overflow sr9800: Add check for usbnet_get_endpoints bpf: Eliminate rlimit-based memory accounting for devmap maps bpf: Fix DEVMAP_HASH overflow check on 32-bit arches bpf: Fix hashtab overflow check on 32-bit arches bpf: Fix stackmap overflow check on 32-bit arches ipv6: fib6_rules: flush route cache when rule is changed net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() net: phy: fix phy_get_internal_delay accessing an empty array net: hns3: fix port duplex configure error in IMP reset net: phy: DP83822: enable rgmii mode if phy_interface_is_rgmii net: phy: dp83822: Fix RGMII TX delay configuration OPP: debugfs: Fix warning around icc_get_name() tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function net/ipv4: Replace one-element array with flexible-array member net/ipv4: Revert use of struct_size() helper net/ipv4/ipv6: Replace one-element arraya with flexible-array members bpf: net: Change do_ip_getsockopt() to take the sockptr_t argument ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() function udp: fix incorrect parameter validation in the udp_lib_getsockopt() function net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function net/x25: fix incorrect parameter validation in the x25_getsockopt() function nfp: flower: handle acti_netdevs allocation failure dm raid: fix false positive for requeue needed during reshape dm: call the resume method on internal suspend drm/tegra: dsi: Add missing check for of_find_device_by_node drm/tegra: dsi: Make use of the helper function dev_err_probe() drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe() drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe() drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths of tegra_output_probe() drm/rockchip: inno_hdmi: Fix video timing drm: Don't treat 0 as -1 in drm_fixp2int_ceil drm/rockchip: lvds: do not overwrite error code drm/rockchip: lvds: do not print scary message when probing defer drm/lima: fix a memleak in lima_heap_alloc dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA media: tc358743: register v4l2 async device only after successful setup PCI/DPC: Print all TLP Prefixes, not just the first perf record: Fix possible incorrect free in record__switch_output() HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()' perf evsel: Fix duplicate initialization of data->id in evsel__parse_sample() media: em28xx: annotate unchecked call to media_device_register() media: v4l2-tpg: fix some memleaks in tpg_alloc media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity media: edia: dvbdev: fix a use-after-free pinctrl: mediatek: Drop bogus slew rate register range for MT8192 clk: qcom: reset: Commonize the de/assert functions clk: qcom: reset: Ensure write completion on reset de/assertion quota: simplify drop_dquot_ref() quota: Fix potential NULL pointer dereference quota: Fix rcu annotations of inode dquot pointers PCI: switchtec: Fix an error handling path in switchtec_pci_probe() crypto: xilinx - call finalize with bh disabled perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str() drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode() ALSA: seq: fix function cast warnings perf stat: Avoid metric-only segv ASoC: meson: Use dev_err_probe() helper ASoC: meson: aiu: fix function pointer type mismatch ASoC: meson: t9015: fix function pointer type mismatch media: sun8i-di: Fix coefficient writes media: sun8i-di: Fix power on/off sequences media: sun8i-di: Fix chroma difference threshold media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak media: go7007: add check of return value of go7007_read_addr() media: pvrusb2: remove redundant NULL check media: pvrusb2: fix pvr2_stream_callback casts clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times drm/mediatek: dsi: Fix DSI RGB666 formats and definitions PCI: Mark 3ware-9650SE Root Port Extended Tags as broken clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister() drm/tegra: put drm_gem_object ref on error in tegra_fb_create mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref crypto: arm/sha - fix function cast warnings drm/tidss: Fix initial plane zpos values mtd: maps: physmap-core: fix flash size larger than 32-bit mtd: rawnand: lpc32xx_mlc: fix irq handler prototype ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs ASoC: meson: axg-tdm-interface: add frame rate constraint drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int() media: pvrusb2: fix uaf in pvr2_context_set_notify media: dvb-frontends: avoid stack overflow warnings with clang media: go7007: fix a memleak in go7007_load_encoder media: ttpci: fix two memleaks in budget_av_attach media: mediatek: vcodec: avoid -Wcast-function-type-strict warning drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks drm/msm/dpu: add division of drm_display_mode's hskew parameter powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc. leds: aw2013: Unlock mutex before destroying it leds: sgm3140: Add missing timer cleanup and flash gpio control backlight: lm3630a: Initialize backlight_properties on init backlight: lm3630a: Don't set bl->props.brightness in get_brightness backlight: da9052: Fully initialize backlight_properties during probe backlight: lm3639: Fully initialize backlight_properties during probe backlight: lp8788: Fully initialize backlight_properties during probe sparc32: Fix section mismatch in leon_pci_grpci clk: Fix clk_core_get NULL dereference ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops ALSA: usb-audio: Stop parsing channels bits when all channels are found. RDMA/srpt: Do not register event handler until srpt device is fully setup f2fs: compress: fix to check unreleased compressed cluster scsi: csiostor: Avoid function pointer casts RDMA/device: Fix a race between mad_client and cm_client init scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr() NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102 NFSv4.2: fix listxattr maximum XDR buffer size watchdog: stm32_iwdg: initialize default timeout NFS: Fix an off by one in root_nfs_cat() afs: Revert "afs: Hide silly-rename files from userspace" remoteproc: stm32: Constify st_rproc_ops remoteproc: Add new get_loaded_rsc_table() to rproc_ops remoteproc: stm32: Move resource table setup to rproc_ops remoteproc: stm32: use correct format strings on 64-bit remoteproc: stm32: Fix incorrect type in assignment for va remoteproc: stm32: Fix incorrect type assignment returned by stm32_rproc_get_loaded_rsc_tablef tty: vt: fix 20 vs 0x20 typo in EScsiignore serial: max310x: fix syntax error in IRQ error message tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT kconfig: fix infinite loop when expanding a macro at the end of file rtc: mt6397: select IRQ_DOMAIN instead of depending on it serial: 8250_exar: Don't remove GPIO device on suspend staging: greybus: fix get_channel_from_mode() failure path usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin io_uring: don't save/restore iowait state octeontx2-af: Use matching wake_up API variant in CGX command interface s390/vtime: fix average steal time calculation soc: fsl: dpio: fix kcalloc() argument order hsr: Fix uninit-value access in hsr_get_node() packet: annotate data-races around ignore_outgoing net: dsa: mt7530: prevent possible incorrect XTAL frequency selection wireguard: receive: annotate data-race around receiving_counter.counter rds: introduce acquire/release ordering in acquire/release_in_xmit() hsr: Handle failures in module init net/bnx2x: Prevent access to a freed page in page_pool octeontx2-af: Use separate handlers for interrupts netfilter: nft_set_pipapo: release elements in clone only from destroy path scsi: fc: Update formal FPIN descriptor definitions ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add regulator nodes vcc-dram and vcc1v2 netfilter: nf_tables: do not compare internal table flags on updates rcu: add a helper to report consolidated flavor QS bpf: report RCU QS in cpumap kthread spi: spi-mt65xx: Fix NULL pointer access in interrupt handler regmap: Add missing map->bus check remoteproc: stm32: fix phys_addr_t format string Linux 5.10.214 Change-Id: Iad0cc6acbf53bac96c0409ce61dc6836d83ed7bc Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
1514 lines
40 KiB
C
1514 lines
40 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 1995 Linus Torvalds
|
|
* Copyright (C) 2001, 2002 Andi Kleen, SuSE Labs.
|
|
* Copyright (C) 2008-2009, Red Hat Inc., Ingo Molnar
|
|
*/
|
|
#include <linux/sched.h> /* test_thread_flag(), ... */
|
|
#include <linux/sched/task_stack.h> /* task_stack_*(), ... */
|
|
#include <linux/kdebug.h> /* oops_begin/end, ... */
|
|
#include <linux/extable.h> /* search_exception_tables */
|
|
#include <linux/memblock.h> /* max_low_pfn */
|
|
#include <linux/kfence.h> /* kfence_handle_page_fault */
|
|
#include <linux/kprobes.h> /* NOKPROBE_SYMBOL, ... */
|
|
#include <linux/mmiotrace.h> /* kmmio_handler, ... */
|
|
#include <linux/perf_event.h> /* perf_sw_event */
|
|
#include <linux/hugetlb.h> /* hstate_index_to_shift */
|
|
#include <linux/prefetch.h> /* prefetchw */
|
|
#include <linux/context_tracking.h> /* exception_enter(), ... */
|
|
#include <linux/uaccess.h> /* faulthandler_disabled() */
|
|
#include <linux/efi.h> /* efi_recover_from_page_fault()*/
|
|
#include <linux/mm_types.h>
|
|
|
|
#include <asm/cpufeature.h> /* boot_cpu_has, ... */
|
|
#include <asm/traps.h> /* dotraplinkage, ... */
|
|
#include <asm/fixmap.h> /* VSYSCALL_ADDR */
|
|
#include <asm/vsyscall.h> /* emulate_vsyscall */
|
|
#include <asm/vm86.h> /* struct vm86 */
|
|
#include <asm/mmu_context.h> /* vma_pkey() */
|
|
#include <asm/efi.h> /* efi_recover_from_page_fault()*/
|
|
#include <asm/desc.h> /* store_idt(), ... */
|
|
#include <asm/cpu_entry_area.h> /* exception stack */
|
|
#include <asm/pgtable_areas.h> /* VMALLOC_START, ... */
|
|
#include <asm/kvm_para.h> /* kvm_handle_async_pf */
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include <asm/trace/exceptions.h>
|
|
|
|
/*
|
|
* Returns 0 if mmiotrace is disabled, or if the fault is not
|
|
* handled by mmiotrace:
|
|
*/
|
|
static nokprobe_inline int
|
|
kmmio_fault(struct pt_regs *regs, unsigned long addr)
|
|
{
|
|
if (unlikely(is_kmmio_active()))
|
|
if (kmmio_handler(regs, addr) == 1)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Prefetch quirks:
|
|
*
|
|
* 32-bit mode:
|
|
*
|
|
* Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
|
|
* Check that here and ignore it. This is AMD erratum #91.
|
|
*
|
|
* 64-bit mode:
|
|
*
|
|
* Sometimes the CPU reports invalid exceptions on prefetch.
|
|
* Check that here and ignore it.
|
|
*
|
|
* Opcode checker based on code by Richard Brunner.
|
|
*/
|
|
static inline int
|
|
check_prefetch_opcode(struct pt_regs *regs, unsigned char *instr,
|
|
unsigned char opcode, int *prefetch)
|
|
{
|
|
unsigned char instr_hi = opcode & 0xf0;
|
|
unsigned char instr_lo = opcode & 0x0f;
|
|
|
|
switch (instr_hi) {
|
|
case 0x20:
|
|
case 0x30:
|
|
/*
|
|
* Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
|
|
* In X86_64 long mode, the CPU will signal invalid
|
|
* opcode if some of these prefixes are present so
|
|
* X86_64 will never get here anyway
|
|
*/
|
|
return ((instr_lo & 7) == 0x6);
|
|
#ifdef CONFIG_X86_64
|
|
case 0x40:
|
|
/*
|
|
* In 64-bit mode 0x40..0x4F are valid REX prefixes
|
|
*/
|
|
return (!user_mode(regs) || user_64bit_mode(regs));
|
|
#endif
|
|
case 0x60:
|
|
/* 0x64 thru 0x67 are valid prefixes in all modes. */
|
|
return (instr_lo & 0xC) == 0x4;
|
|
case 0xF0:
|
|
/* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
|
|
return !instr_lo || (instr_lo>>1) == 1;
|
|
case 0x00:
|
|
/* Prefetch instruction is 0x0F0D or 0x0F18 */
|
|
if (get_kernel_nofault(opcode, instr))
|
|
return 0;
|
|
|
|
*prefetch = (instr_lo == 0xF) &&
|
|
(opcode == 0x0D || opcode == 0x18);
|
|
return 0;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int
|
|
is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
|
|
{
|
|
unsigned char *max_instr;
|
|
unsigned char *instr;
|
|
int prefetch = 0;
|
|
|
|
/*
|
|
* If it was a exec (instruction fetch) fault on NX page, then
|
|
* do not ignore the fault:
|
|
*/
|
|
if (error_code & X86_PF_INSTR)
|
|
return 0;
|
|
|
|
instr = (void *)convert_ip_to_linear(current, regs);
|
|
max_instr = instr + 15;
|
|
|
|
/*
|
|
* This code has historically always bailed out if IP points to a
|
|
* not-present page (e.g. due to a race). No one has ever
|
|
* complained about this.
|
|
*/
|
|
pagefault_disable();
|
|
|
|
while (instr < max_instr) {
|
|
unsigned char opcode;
|
|
|
|
if (user_mode(regs)) {
|
|
if (get_user(opcode, instr))
|
|
break;
|
|
} else {
|
|
if (get_kernel_nofault(opcode, instr))
|
|
break;
|
|
}
|
|
|
|
instr++;
|
|
|
|
if (!check_prefetch_opcode(regs, instr, opcode, &prefetch))
|
|
break;
|
|
}
|
|
|
|
pagefault_enable();
|
|
return prefetch;
|
|
}
|
|
|
|
DEFINE_SPINLOCK(pgd_lock);
|
|
LIST_HEAD(pgd_list);
|
|
|
|
#ifdef CONFIG_X86_32
|
|
static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
|
|
{
|
|
unsigned index = pgd_index(address);
|
|
pgd_t *pgd_k;
|
|
p4d_t *p4d, *p4d_k;
|
|
pud_t *pud, *pud_k;
|
|
pmd_t *pmd, *pmd_k;
|
|
|
|
pgd += index;
|
|
pgd_k = init_mm.pgd + index;
|
|
|
|
if (!pgd_present(*pgd_k))
|
|
return NULL;
|
|
|
|
/*
|
|
* set_pgd(pgd, *pgd_k); here would be useless on PAE
|
|
* and redundant with the set_pmd() on non-PAE. As would
|
|
* set_p4d/set_pud.
|
|
*/
|
|
p4d = p4d_offset(pgd, address);
|
|
p4d_k = p4d_offset(pgd_k, address);
|
|
if (!p4d_present(*p4d_k))
|
|
return NULL;
|
|
|
|
pud = pud_offset(p4d, address);
|
|
pud_k = pud_offset(p4d_k, address);
|
|
if (!pud_present(*pud_k))
|
|
return NULL;
|
|
|
|
pmd = pmd_offset(pud, address);
|
|
pmd_k = pmd_offset(pud_k, address);
|
|
|
|
if (pmd_present(*pmd) != pmd_present(*pmd_k))
|
|
set_pmd(pmd, *pmd_k);
|
|
|
|
if (!pmd_present(*pmd_k))
|
|
return NULL;
|
|
else
|
|
BUG_ON(pmd_pfn(*pmd) != pmd_pfn(*pmd_k));
|
|
|
|
return pmd_k;
|
|
}
|
|
|
|
/*
|
|
* Handle a fault on the vmalloc or module mapping area
|
|
*
|
|
* This is needed because there is a race condition between the time
|
|
* when the vmalloc mapping code updates the PMD to the point in time
|
|
* where it synchronizes this update with the other page-tables in the
|
|
* system.
|
|
*
|
|
* In this race window another thread/CPU can map an area on the same
|
|
* PMD, finds it already present and does not synchronize it with the
|
|
* rest of the system yet. As a result v[mz]alloc might return areas
|
|
* which are not mapped in every page-table in the system, causing an
|
|
* unhandled page-fault when they are accessed.
|
|
*/
|
|
static noinline int vmalloc_fault(unsigned long address)
|
|
{
|
|
unsigned long pgd_paddr;
|
|
pmd_t *pmd_k;
|
|
pte_t *pte_k;
|
|
|
|
/* Make sure we are in vmalloc area: */
|
|
if (!(address >= VMALLOC_START && address < VMALLOC_END))
|
|
return -1;
|
|
|
|
/*
|
|
* Synchronize this task's top level page-table
|
|
* with the 'reference' page table.
|
|
*
|
|
* Do _not_ use "current" here. We might be inside
|
|
* an interrupt in the middle of a task switch..
|
|
*/
|
|
pgd_paddr = read_cr3_pa();
|
|
pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
|
|
if (!pmd_k)
|
|
return -1;
|
|
|
|
if (pmd_large(*pmd_k))
|
|
return 0;
|
|
|
|
pte_k = pte_offset_kernel(pmd_k, address);
|
|
if (!pte_present(*pte_k))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
NOKPROBE_SYMBOL(vmalloc_fault);
|
|
|
|
void arch_sync_kernel_mappings(unsigned long start, unsigned long end)
|
|
{
|
|
unsigned long addr;
|
|
|
|
for (addr = start & PMD_MASK;
|
|
addr >= TASK_SIZE_MAX && addr < VMALLOC_END;
|
|
addr += PMD_SIZE) {
|
|
struct page *page;
|
|
|
|
spin_lock(&pgd_lock);
|
|
list_for_each_entry(page, &pgd_list, lru) {
|
|
spinlock_t *pgt_lock;
|
|
|
|
/* the pgt_lock only for Xen */
|
|
pgt_lock = &pgd_page_get_mm(page)->page_table_lock;
|
|
|
|
spin_lock(pgt_lock);
|
|
vmalloc_sync_one(page_address(page), addr);
|
|
spin_unlock(pgt_lock);
|
|
}
|
|
spin_unlock(&pgd_lock);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Did it hit the DOS screen memory VA from vm86 mode?
|
|
*/
|
|
static inline void
|
|
check_v8086_mode(struct pt_regs *regs, unsigned long address,
|
|
struct task_struct *tsk)
|
|
{
|
|
#ifdef CONFIG_VM86
|
|
unsigned long bit;
|
|
|
|
if (!v8086_mode(regs) || !tsk->thread.vm86)
|
|
return;
|
|
|
|
bit = (address - 0xA0000) >> PAGE_SHIFT;
|
|
if (bit < 32)
|
|
tsk->thread.vm86->screen_bitmap |= 1 << bit;
|
|
#endif
|
|
}
|
|
|
|
static bool low_pfn(unsigned long pfn)
|
|
{
|
|
return pfn < max_low_pfn;
|
|
}
|
|
|
|
static void dump_pagetable(unsigned long address)
|
|
{
|
|
pgd_t *base = __va(read_cr3_pa());
|
|
pgd_t *pgd = &base[pgd_index(address)];
|
|
p4d_t *p4d;
|
|
pud_t *pud;
|
|
pmd_t *pmd;
|
|
pte_t *pte;
|
|
|
|
#ifdef CONFIG_X86_PAE
|
|
pr_info("*pdpt = %016Lx ", pgd_val(*pgd));
|
|
if (!low_pfn(pgd_val(*pgd) >> PAGE_SHIFT) || !pgd_present(*pgd))
|
|
goto out;
|
|
#define pr_pde pr_cont
|
|
#else
|
|
#define pr_pde pr_info
|
|
#endif
|
|
p4d = p4d_offset(pgd, address);
|
|
pud = pud_offset(p4d, address);
|
|
pmd = pmd_offset(pud, address);
|
|
pr_pde("*pde = %0*Lx ", sizeof(*pmd) * 2, (u64)pmd_val(*pmd));
|
|
#undef pr_pde
|
|
|
|
/*
|
|
* We must not directly access the pte in the highpte
|
|
* case if the page table is located in highmem.
|
|
* And let's rather not kmap-atomic the pte, just in case
|
|
* it's allocated already:
|
|
*/
|
|
if (!low_pfn(pmd_pfn(*pmd)) || !pmd_present(*pmd) || pmd_large(*pmd))
|
|
goto out;
|
|
|
|
pte = pte_offset_kernel(pmd, address);
|
|
pr_cont("*pte = %0*Lx ", sizeof(*pte) * 2, (u64)pte_val(*pte));
|
|
out:
|
|
pr_cont("\n");
|
|
}
|
|
|
|
#else /* CONFIG_X86_64: */
|
|
|
|
#ifdef CONFIG_CPU_SUP_AMD
|
|
static const char errata93_warning[] =
|
|
KERN_ERR
|
|
"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
|
|
"******* Working around it, but it may cause SEGVs or burn power.\n"
|
|
"******* Please consider a BIOS update.\n"
|
|
"******* Disabling USB legacy in the BIOS may also help.\n";
|
|
#endif
|
|
|
|
/*
|
|
* No vm86 mode in 64-bit mode:
|
|
*/
|
|
static inline void
|
|
check_v8086_mode(struct pt_regs *regs, unsigned long address,
|
|
struct task_struct *tsk)
|
|
{
|
|
}
|
|
|
|
static int bad_address(void *p)
|
|
{
|
|
unsigned long dummy;
|
|
|
|
return get_kernel_nofault(dummy, (unsigned long *)p);
|
|
}
|
|
|
|
static void dump_pagetable(unsigned long address)
|
|
{
|
|
pgd_t *base = __va(read_cr3_pa());
|
|
pgd_t *pgd = base + pgd_index(address);
|
|
p4d_t *p4d;
|
|
pud_t *pud;
|
|
pmd_t *pmd;
|
|
pte_t *pte;
|
|
|
|
if (bad_address(pgd))
|
|
goto bad;
|
|
|
|
pr_info("PGD %lx ", pgd_val(*pgd));
|
|
|
|
if (!pgd_present(*pgd))
|
|
goto out;
|
|
|
|
p4d = p4d_offset(pgd, address);
|
|
if (bad_address(p4d))
|
|
goto bad;
|
|
|
|
pr_cont("P4D %lx ", p4d_val(*p4d));
|
|
if (!p4d_present(*p4d) || p4d_large(*p4d))
|
|
goto out;
|
|
|
|
pud = pud_offset(p4d, address);
|
|
if (bad_address(pud))
|
|
goto bad;
|
|
|
|
pr_cont("PUD %lx ", pud_val(*pud));
|
|
if (!pud_present(*pud) || pud_large(*pud))
|
|
goto out;
|
|
|
|
pmd = pmd_offset(pud, address);
|
|
if (bad_address(pmd))
|
|
goto bad;
|
|
|
|
pr_cont("PMD %lx ", pmd_val(*pmd));
|
|
if (!pmd_present(*pmd) || pmd_large(*pmd))
|
|
goto out;
|
|
|
|
pte = pte_offset_kernel(pmd, address);
|
|
if (bad_address(pte))
|
|
goto bad;
|
|
|
|
pr_cont("PTE %lx", pte_val(*pte));
|
|
out:
|
|
pr_cont("\n");
|
|
return;
|
|
bad:
|
|
pr_info("BAD\n");
|
|
}
|
|
|
|
#endif /* CONFIG_X86_64 */
|
|
|
|
/*
|
|
* Workaround for K8 erratum #93 & buggy BIOS.
|
|
*
|
|
* BIOS SMM functions are required to use a specific workaround
|
|
* to avoid corruption of the 64bit RIP register on C stepping K8.
|
|
*
|
|
* A lot of BIOS that didn't get tested properly miss this.
|
|
*
|
|
* The OS sees this as a page fault with the upper 32bits of RIP cleared.
|
|
* Try to work around it here.
|
|
*
|
|
* Note we only handle faults in kernel here.
|
|
* Does nothing on 32-bit.
|
|
*/
|
|
static int is_errata93(struct pt_regs *regs, unsigned long address)
|
|
{
|
|
#if defined(CONFIG_X86_64) && defined(CONFIG_CPU_SUP_AMD)
|
|
if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD
|
|
|| boot_cpu_data.x86 != 0xf)
|
|
return 0;
|
|
|
|
if (address != regs->ip)
|
|
return 0;
|
|
|
|
if ((address >> 32) != 0)
|
|
return 0;
|
|
|
|
address |= 0xffffffffUL << 32;
|
|
if ((address >= (u64)_stext && address <= (u64)_etext) ||
|
|
(address >= MODULES_VADDR && address <= MODULES_END)) {
|
|
printk_once(errata93_warning);
|
|
regs->ip = address;
|
|
return 1;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Work around K8 erratum #100 K8 in compat mode occasionally jumps
|
|
* to illegal addresses >4GB.
|
|
*
|
|
* We catch this in the page fault handler because these addresses
|
|
* are not reachable. Just detect this case and return. Any code
|
|
* segment in LDT is compatibility mode.
|
|
*/
|
|
static int is_errata100(struct pt_regs *regs, unsigned long address)
|
|
{
|
|
#ifdef CONFIG_X86_64
|
|
if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) && (address >> 32))
|
|
return 1;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* Pentium F0 0F C7 C8 bug workaround: */
|
|
static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
|
|
{
|
|
#ifdef CONFIG_X86_F00F_BUG
|
|
if (boot_cpu_has_bug(X86_BUG_F00F) && idt_is_f00f_address(address)) {
|
|
handle_invalid_op(regs);
|
|
return 1;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static void show_ldttss(const struct desc_ptr *gdt, const char *name, u16 index)
|
|
{
|
|
u32 offset = (index >> 3) * sizeof(struct desc_struct);
|
|
unsigned long addr;
|
|
struct ldttss_desc desc;
|
|
|
|
if (index == 0) {
|
|
pr_alert("%s: NULL\n", name);
|
|
return;
|
|
}
|
|
|
|
if (offset + sizeof(struct ldttss_desc) >= gdt->size) {
|
|
pr_alert("%s: 0x%hx -- out of bounds\n", name, index);
|
|
return;
|
|
}
|
|
|
|
if (copy_from_kernel_nofault(&desc, (void *)(gdt->address + offset),
|
|
sizeof(struct ldttss_desc))) {
|
|
pr_alert("%s: 0x%hx -- GDT entry is not readable\n",
|
|
name, index);
|
|
return;
|
|
}
|
|
|
|
addr = desc.base0 | (desc.base1 << 16) | ((unsigned long)desc.base2 << 24);
|
|
#ifdef CONFIG_X86_64
|
|
addr |= ((u64)desc.base3 << 32);
|
|
#endif
|
|
pr_alert("%s: 0x%hx -- base=0x%lx limit=0x%x\n",
|
|
name, index, addr, (desc.limit0 | (desc.limit1 << 16)));
|
|
}
|
|
|
|
static void
|
|
show_fault_oops(struct pt_regs *regs, unsigned long error_code, unsigned long address)
|
|
{
|
|
if (!oops_may_print())
|
|
return;
|
|
|
|
if (error_code & X86_PF_INSTR) {
|
|
unsigned int level;
|
|
pgd_t *pgd;
|
|
pte_t *pte;
|
|
|
|
pgd = __va(read_cr3_pa());
|
|
pgd += pgd_index(address);
|
|
|
|
pte = lookup_address_in_pgd(pgd, address, &level);
|
|
|
|
if (pte && pte_present(*pte) && !pte_exec(*pte))
|
|
pr_crit("kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n",
|
|
from_kuid(&init_user_ns, current_uid()));
|
|
if (pte && pte_present(*pte) && pte_exec(*pte) &&
|
|
(pgd_flags(*pgd) & _PAGE_USER) &&
|
|
(__read_cr4() & X86_CR4_SMEP))
|
|
pr_crit("unable to execute userspace code (SMEP?) (uid: %d)\n",
|
|
from_kuid(&init_user_ns, current_uid()));
|
|
}
|
|
|
|
if (address < PAGE_SIZE && !user_mode(regs))
|
|
pr_alert("BUG: kernel NULL pointer dereference, address: %px\n",
|
|
(void *)address);
|
|
else
|
|
pr_alert("BUG: unable to handle page fault for address: %px\n",
|
|
(void *)address);
|
|
|
|
pr_alert("#PF: %s %s in %s mode\n",
|
|
(error_code & X86_PF_USER) ? "user" : "supervisor",
|
|
(error_code & X86_PF_INSTR) ? "instruction fetch" :
|
|
(error_code & X86_PF_WRITE) ? "write access" :
|
|
"read access",
|
|
user_mode(regs) ? "user" : "kernel");
|
|
pr_alert("#PF: error_code(0x%04lx) - %s\n", error_code,
|
|
!(error_code & X86_PF_PROT) ? "not-present page" :
|
|
(error_code & X86_PF_RSVD) ? "reserved bit violation" :
|
|
(error_code & X86_PF_PK) ? "protection keys violation" :
|
|
"permissions violation");
|
|
|
|
if (!(error_code & X86_PF_USER) && user_mode(regs)) {
|
|
struct desc_ptr idt, gdt;
|
|
u16 ldtr, tr;
|
|
|
|
/*
|
|
* This can happen for quite a few reasons. The more obvious
|
|
* ones are faults accessing the GDT, or LDT. Perhaps
|
|
* surprisingly, if the CPU tries to deliver a benign or
|
|
* contributory exception from user code and gets a page fault
|
|
* during delivery, the page fault can be delivered as though
|
|
* it originated directly from user code. This could happen
|
|
* due to wrong permissions on the IDT, GDT, LDT, TSS, or
|
|
* kernel or IST stack.
|
|
*/
|
|
store_idt(&idt);
|
|
|
|
/* Usable even on Xen PV -- it's just slow. */
|
|
native_store_gdt(&gdt);
|
|
|
|
pr_alert("IDT: 0x%lx (limit=0x%hx) GDT: 0x%lx (limit=0x%hx)\n",
|
|
idt.address, idt.size, gdt.address, gdt.size);
|
|
|
|
store_ldt(ldtr);
|
|
show_ldttss(&gdt, "LDTR", ldtr);
|
|
|
|
store_tr(tr);
|
|
show_ldttss(&gdt, "TR", tr);
|
|
}
|
|
|
|
dump_pagetable(address);
|
|
}
|
|
|
|
static noinline void
|
|
pgtable_bad(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address)
|
|
{
|
|
struct task_struct *tsk;
|
|
unsigned long flags;
|
|
int sig;
|
|
|
|
flags = oops_begin();
|
|
tsk = current;
|
|
sig = SIGKILL;
|
|
|
|
printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
|
|
tsk->comm, address);
|
|
dump_pagetable(address);
|
|
|
|
if (__die("Bad pagetable", regs, error_code))
|
|
sig = 0;
|
|
|
|
oops_end(flags, regs, sig);
|
|
}
|
|
|
|
static void set_signal_archinfo(unsigned long address,
|
|
unsigned long error_code)
|
|
{
|
|
struct task_struct *tsk = current;
|
|
|
|
/*
|
|
* To avoid leaking information about the kernel page
|
|
* table layout, pretend that user-mode accesses to
|
|
* kernel addresses are always protection faults.
|
|
*
|
|
* NB: This means that failed vsyscalls with vsyscall=none
|
|
* will have the PROT bit. This doesn't leak any
|
|
* information and does not appear to cause any problems.
|
|
*/
|
|
if (address >= TASK_SIZE_MAX)
|
|
error_code |= X86_PF_PROT;
|
|
|
|
tsk->thread.trap_nr = X86_TRAP_PF;
|
|
tsk->thread.error_code = error_code | X86_PF_USER;
|
|
tsk->thread.cr2 = address;
|
|
}
|
|
|
|
static noinline void
|
|
no_context(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address, int signal, int si_code)
|
|
{
|
|
struct task_struct *tsk = current;
|
|
unsigned long flags;
|
|
int sig;
|
|
|
|
if (user_mode(regs)) {
|
|
/*
|
|
* This is an implicit supervisor-mode access from user
|
|
* mode. Bypass all the kernel-mode recovery code and just
|
|
* OOPS.
|
|
*/
|
|
goto oops;
|
|
}
|
|
|
|
/* Are we prepared to handle this kernel fault? */
|
|
if (fixup_exception(regs, X86_TRAP_PF, error_code, address)) {
|
|
/*
|
|
* Any interrupt that takes a fault gets the fixup. This makes
|
|
* the below recursive fault logic only apply to a faults from
|
|
* task context.
|
|
*/
|
|
if (in_interrupt())
|
|
return;
|
|
|
|
/*
|
|
* Per the above we're !in_interrupt(), aka. task context.
|
|
*
|
|
* In this case we need to make sure we're not recursively
|
|
* faulting through the emulate_vsyscall() logic.
|
|
*/
|
|
if (current->thread.sig_on_uaccess_err && signal) {
|
|
set_signal_archinfo(address, error_code);
|
|
|
|
/* XXX: hwpoison faults will set the wrong code. */
|
|
force_sig_fault(signal, si_code, (void __user *)address);
|
|
}
|
|
|
|
/*
|
|
* Barring that, we can do the fixup and be happy.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_VMAP_STACK
|
|
/*
|
|
* Stack overflow? During boot, we can fault near the initial
|
|
* stack in the direct map, but that's not an overflow -- check
|
|
* that we're in vmalloc space to avoid this.
|
|
*/
|
|
if (is_vmalloc_addr((void *)address) &&
|
|
(((unsigned long)tsk->stack - 1 - address < PAGE_SIZE) ||
|
|
address - ((unsigned long)tsk->stack + THREAD_SIZE) < PAGE_SIZE)) {
|
|
unsigned long stack = __this_cpu_ist_top_va(DF) - sizeof(void *);
|
|
/*
|
|
* We're likely to be running with very little stack space
|
|
* left. It's plausible that we'd hit this condition but
|
|
* double-fault even before we get this far, in which case
|
|
* we're fine: the double-fault handler will deal with it.
|
|
*
|
|
* We don't want to make it all the way into the oops code
|
|
* and then double-fault, though, because we're likely to
|
|
* break the console driver and lose most of the stack dump.
|
|
*/
|
|
asm volatile ("movq %[stack], %%rsp\n\t"
|
|
"call handle_stack_overflow\n\t"
|
|
"1: jmp 1b"
|
|
: ASM_CALL_CONSTRAINT
|
|
: "D" ("kernel stack overflow (page fault)"),
|
|
"S" (regs), "d" (address),
|
|
[stack] "rm" (stack));
|
|
unreachable();
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* 32-bit:
|
|
*
|
|
* Valid to do another page fault here, because if this fault
|
|
* had been triggered by is_prefetch fixup_exception would have
|
|
* handled it.
|
|
*
|
|
* 64-bit:
|
|
*
|
|
* Hall of shame of CPU/BIOS bugs.
|
|
*/
|
|
if (is_prefetch(regs, error_code, address))
|
|
return;
|
|
|
|
if (is_errata93(regs, address))
|
|
return;
|
|
|
|
/*
|
|
* Buggy firmware could access regions which might page fault, try to
|
|
* recover from such faults.
|
|
*/
|
|
if (IS_ENABLED(CONFIG_EFI))
|
|
efi_recover_from_page_fault(address);
|
|
|
|
/* Only not-present faults should be handled by KFENCE. */
|
|
if (!(error_code & X86_PF_PROT) &&
|
|
kfence_handle_page_fault(address, error_code & X86_PF_WRITE, regs))
|
|
return;
|
|
|
|
oops:
|
|
/*
|
|
* Oops. The kernel tried to access some bad page. We'll have to
|
|
* terminate things with extreme prejudice:
|
|
*/
|
|
flags = oops_begin();
|
|
|
|
show_fault_oops(regs, error_code, address);
|
|
|
|
if (task_stack_end_corrupted(tsk))
|
|
printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
|
|
|
|
sig = SIGKILL;
|
|
if (__die("Oops", regs, error_code))
|
|
sig = 0;
|
|
|
|
/* Executive summary in case the body of the oops scrolled away */
|
|
printk(KERN_DEFAULT "CR2: %016lx\n", address);
|
|
|
|
oops_end(flags, regs, sig);
|
|
}
|
|
|
|
/*
|
|
* Print out info about fatal segfaults, if the show_unhandled_signals
|
|
* sysctl is set:
|
|
*/
|
|
static inline void
|
|
show_signal_msg(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address, struct task_struct *tsk)
|
|
{
|
|
const char *loglvl = task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG;
|
|
|
|
if (!unhandled_signal(tsk, SIGSEGV))
|
|
return;
|
|
|
|
if (!printk_ratelimit())
|
|
return;
|
|
|
|
printk("%s%s[%d]: segfault at %lx ip %px sp %px error %lx",
|
|
loglvl, tsk->comm, task_pid_nr(tsk), address,
|
|
(void *)regs->ip, (void *)regs->sp, error_code);
|
|
|
|
print_vma_addr(KERN_CONT " in ", regs->ip);
|
|
|
|
printk(KERN_CONT "\n");
|
|
|
|
show_opcodes(regs, loglvl);
|
|
}
|
|
|
|
static void
|
|
__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address, u32 pkey, int si_code)
|
|
{
|
|
struct task_struct *tsk = current;
|
|
|
|
/* User mode accesses just cause a SIGSEGV */
|
|
if (user_mode(regs) && (error_code & X86_PF_USER)) {
|
|
/*
|
|
* It's possible to have interrupts off here:
|
|
*/
|
|
local_irq_enable();
|
|
|
|
/*
|
|
* Valid to do another page fault here because this one came
|
|
* from user space:
|
|
*/
|
|
if (is_prefetch(regs, error_code, address))
|
|
return;
|
|
|
|
if (is_errata100(regs, address))
|
|
return;
|
|
|
|
/*
|
|
* To avoid leaking information about the kernel page table
|
|
* layout, pretend that user-mode accesses to kernel addresses
|
|
* are always protection faults.
|
|
*/
|
|
if (address >= TASK_SIZE_MAX)
|
|
error_code |= X86_PF_PROT;
|
|
|
|
if (likely(show_unhandled_signals))
|
|
show_signal_msg(regs, error_code, address, tsk);
|
|
|
|
set_signal_archinfo(address, error_code);
|
|
|
|
if (si_code == SEGV_PKUERR)
|
|
force_sig_pkuerr((void __user *)address, pkey);
|
|
|
|
force_sig_fault(SIGSEGV, si_code, (void __user *)address);
|
|
|
|
local_irq_disable();
|
|
|
|
return;
|
|
}
|
|
|
|
if (is_f00f_bug(regs, address))
|
|
return;
|
|
|
|
no_context(regs, error_code, address, SIGSEGV, si_code);
|
|
}
|
|
|
|
static noinline void
|
|
bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address)
|
|
{
|
|
__bad_area_nosemaphore(regs, error_code, address, 0, SEGV_MAPERR);
|
|
}
|
|
|
|
static void
|
|
__bad_area(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address, u32 pkey, int si_code)
|
|
{
|
|
struct mm_struct *mm = current->mm;
|
|
/*
|
|
* Something tried to access memory that isn't in our memory map..
|
|
* Fix it, but check if it's kernel or user first..
|
|
*/
|
|
mmap_read_unlock(mm);
|
|
|
|
__bad_area_nosemaphore(regs, error_code, address, pkey, si_code);
|
|
}
|
|
|
|
static noinline void
|
|
bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
|
|
{
|
|
__bad_area(regs, error_code, address, 0, SEGV_MAPERR);
|
|
}
|
|
|
|
static inline bool bad_area_access_from_pkeys(unsigned long error_code,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
/* This code is always called on the current mm */
|
|
bool foreign = false;
|
|
|
|
if (!boot_cpu_has(X86_FEATURE_OSPKE))
|
|
return false;
|
|
if (error_code & X86_PF_PK)
|
|
return true;
|
|
/* this checks permission keys on the VMA: */
|
|
if (!arch_vma_access_permitted(vma, (error_code & X86_PF_WRITE),
|
|
(error_code & X86_PF_INSTR), foreign))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static noinline void
|
|
bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address, struct vm_area_struct *vma)
|
|
{
|
|
/*
|
|
* This OSPKE check is not strictly necessary at runtime.
|
|
* But, doing it this way allows compiler optimizations
|
|
* if pkeys are compiled out.
|
|
*/
|
|
if (bad_area_access_from_pkeys(error_code, vma)) {
|
|
/*
|
|
* A protection key fault means that the PKRU value did not allow
|
|
* access to some PTE. Userspace can figure out what PKRU was
|
|
* from the XSAVE state. This function captures the pkey from
|
|
* the vma and passes it to userspace so userspace can discover
|
|
* which protection key was set on the PTE.
|
|
*
|
|
* If we get here, we know that the hardware signaled a X86_PF_PK
|
|
* fault and that there was a VMA once we got in the fault
|
|
* handler. It does *not* guarantee that the VMA we find here
|
|
* was the one that we faulted on.
|
|
*
|
|
* 1. T1 : mprotect_key(foo, PAGE_SIZE, pkey=4);
|
|
* 2. T1 : set PKRU to deny access to pkey=4, touches page
|
|
* 3. T1 : faults...
|
|
* 4. T2: mprotect_key(foo, PAGE_SIZE, pkey=5);
|
|
* 5. T1 : enters fault handler, takes mmap_lock, etc...
|
|
* 6. T1 : reaches here, sees vma_pkey(vma)=5, when we really
|
|
* faulted on a pte with its pkey=4.
|
|
*/
|
|
u32 pkey = vma_pkey(vma);
|
|
|
|
__bad_area(regs, error_code, address, pkey, SEGV_PKUERR);
|
|
} else {
|
|
__bad_area(regs, error_code, address, 0, SEGV_ACCERR);
|
|
}
|
|
}
|
|
|
|
static void
|
|
do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
|
|
vm_fault_t fault)
|
|
{
|
|
/* Kernel mode? Handle exceptions or die: */
|
|
if (!(error_code & X86_PF_USER)) {
|
|
no_context(regs, error_code, address, SIGBUS, BUS_ADRERR);
|
|
return;
|
|
}
|
|
|
|
/* User-space => ok to do another page fault: */
|
|
if (is_prefetch(regs, error_code, address))
|
|
return;
|
|
|
|
set_signal_archinfo(address, error_code);
|
|
|
|
#ifdef CONFIG_MEMORY_FAILURE
|
|
if (fault & (VM_FAULT_HWPOISON|VM_FAULT_HWPOISON_LARGE)) {
|
|
struct task_struct *tsk = current;
|
|
unsigned lsb = 0;
|
|
|
|
pr_err(
|
|
"MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n",
|
|
tsk->comm, tsk->pid, address);
|
|
if (fault & VM_FAULT_HWPOISON_LARGE)
|
|
lsb = hstate_index_to_shift(VM_FAULT_GET_HINDEX(fault));
|
|
if (fault & VM_FAULT_HWPOISON)
|
|
lsb = PAGE_SHIFT;
|
|
force_sig_mceerr(BUS_MCEERR_AR, (void __user *)address, lsb);
|
|
return;
|
|
}
|
|
#endif
|
|
force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
|
|
}
|
|
|
|
static noinline void
|
|
mm_fault_error(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address, vm_fault_t fault)
|
|
{
|
|
if (fatal_signal_pending(current) && !(error_code & X86_PF_USER)) {
|
|
no_context(regs, error_code, address, 0, 0);
|
|
return;
|
|
}
|
|
|
|
if (fault & VM_FAULT_OOM) {
|
|
/* Kernel mode? Handle exceptions or die: */
|
|
if (!(error_code & X86_PF_USER)) {
|
|
no_context(regs, error_code, address,
|
|
SIGSEGV, SEGV_MAPERR);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* We ran out of memory, call the OOM killer, and return the
|
|
* userspace (which will retry the fault, or kill us if we got
|
|
* oom-killed):
|
|
*/
|
|
pagefault_out_of_memory();
|
|
} else {
|
|
if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON|
|
|
VM_FAULT_HWPOISON_LARGE))
|
|
do_sigbus(regs, error_code, address, fault);
|
|
else if (fault & VM_FAULT_SIGSEGV)
|
|
bad_area_nosemaphore(regs, error_code, address);
|
|
else
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static int spurious_kernel_fault_check(unsigned long error_code, pte_t *pte)
|
|
{
|
|
if ((error_code & X86_PF_WRITE) && !pte_write(*pte))
|
|
return 0;
|
|
|
|
if ((error_code & X86_PF_INSTR) && !pte_exec(*pte))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Handle a spurious fault caused by a stale TLB entry.
|
|
*
|
|
* This allows us to lazily refresh the TLB when increasing the
|
|
* permissions of a kernel page (RO -> RW or NX -> X). Doing it
|
|
* eagerly is very expensive since that implies doing a full
|
|
* cross-processor TLB flush, even if no stale TLB entries exist
|
|
* on other processors.
|
|
*
|
|
* Spurious faults may only occur if the TLB contains an entry with
|
|
* fewer permission than the page table entry. Non-present (P = 0)
|
|
* and reserved bit (R = 1) faults are never spurious.
|
|
*
|
|
* There are no security implications to leaving a stale TLB when
|
|
* increasing the permissions on a page.
|
|
*
|
|
* Returns non-zero if a spurious fault was handled, zero otherwise.
|
|
*
|
|
* See Intel Developer's Manual Vol 3 Section 4.10.4.3, bullet 3
|
|
* (Optional Invalidation).
|
|
*/
|
|
static noinline int
|
|
spurious_kernel_fault(unsigned long error_code, unsigned long address)
|
|
{
|
|
pgd_t *pgd;
|
|
p4d_t *p4d;
|
|
pud_t *pud;
|
|
pmd_t *pmd;
|
|
pte_t *pte;
|
|
int ret;
|
|
|
|
/*
|
|
* Only writes to RO or instruction fetches from NX may cause
|
|
* spurious faults.
|
|
*
|
|
* These could be from user or supervisor accesses but the TLB
|
|
* is only lazily flushed after a kernel mapping protection
|
|
* change, so user accesses are not expected to cause spurious
|
|
* faults.
|
|
*/
|
|
if (error_code != (X86_PF_WRITE | X86_PF_PROT) &&
|
|
error_code != (X86_PF_INSTR | X86_PF_PROT))
|
|
return 0;
|
|
|
|
pgd = init_mm.pgd + pgd_index(address);
|
|
if (!pgd_present(*pgd))
|
|
return 0;
|
|
|
|
p4d = p4d_offset(pgd, address);
|
|
if (!p4d_present(*p4d))
|
|
return 0;
|
|
|
|
if (p4d_large(*p4d))
|
|
return spurious_kernel_fault_check(error_code, (pte_t *) p4d);
|
|
|
|
pud = pud_offset(p4d, address);
|
|
if (!pud_present(*pud))
|
|
return 0;
|
|
|
|
if (pud_large(*pud))
|
|
return spurious_kernel_fault_check(error_code, (pte_t *) pud);
|
|
|
|
pmd = pmd_offset(pud, address);
|
|
if (!pmd_present(*pmd))
|
|
return 0;
|
|
|
|
if (pmd_large(*pmd))
|
|
return spurious_kernel_fault_check(error_code, (pte_t *) pmd);
|
|
|
|
pte = pte_offset_kernel(pmd, address);
|
|
if (!pte_present(*pte))
|
|
return 0;
|
|
|
|
ret = spurious_kernel_fault_check(error_code, pte);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
/*
|
|
* Make sure we have permissions in PMD.
|
|
* If not, then there's a bug in the page tables:
|
|
*/
|
|
ret = spurious_kernel_fault_check(error_code, (pte_t *) pmd);
|
|
WARN_ONCE(!ret, "PMD has incorrect permission bits\n");
|
|
|
|
return ret;
|
|
}
|
|
NOKPROBE_SYMBOL(spurious_kernel_fault);
|
|
|
|
int show_unhandled_signals = 1;
|
|
|
|
static inline int
|
|
access_error(unsigned long error_code, struct vm_area_struct *vma)
|
|
{
|
|
/* This is only called for the current mm, so: */
|
|
bool foreign = false;
|
|
|
|
/*
|
|
* Read or write was blocked by protection keys. This is
|
|
* always an unconditional error and can never result in
|
|
* a follow-up action to resolve the fault, like a COW.
|
|
*/
|
|
if (error_code & X86_PF_PK)
|
|
return 1;
|
|
|
|
/*
|
|
* Make sure to check the VMA so that we do not perform
|
|
* faults just to hit a X86_PF_PK as soon as we fill in a
|
|
* page.
|
|
*/
|
|
if (!arch_vma_access_permitted(vma, (error_code & X86_PF_WRITE),
|
|
(error_code & X86_PF_INSTR), foreign))
|
|
return 1;
|
|
|
|
if (error_code & X86_PF_WRITE) {
|
|
/* write, present and write, not present: */
|
|
if (unlikely(!(vma->vm_flags & VM_WRITE)))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/* read, present: */
|
|
if (unlikely(error_code & X86_PF_PROT))
|
|
return 1;
|
|
|
|
/* read, not present: */
|
|
if (unlikely(!vma_is_accessible(vma)))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
bool fault_in_kernel_space(unsigned long address)
|
|
{
|
|
/*
|
|
* On 64-bit systems, the vsyscall page is at an address above
|
|
* TASK_SIZE_MAX, but is not considered part of the kernel
|
|
* address space.
|
|
*/
|
|
if (IS_ENABLED(CONFIG_X86_64) && is_vsyscall_vaddr(address))
|
|
return false;
|
|
|
|
return address >= TASK_SIZE_MAX;
|
|
}
|
|
|
|
/*
|
|
* Called for all faults where 'address' is part of the kernel address
|
|
* space. Might get called for faults that originate from *code* that
|
|
* ran in userspace or the kernel.
|
|
*/
|
|
static void
|
|
do_kern_addr_fault(struct pt_regs *regs, unsigned long hw_error_code,
|
|
unsigned long address)
|
|
{
|
|
/*
|
|
* Protection keys exceptions only happen on user pages. We
|
|
* have no user pages in the kernel portion of the address
|
|
* space, so do not expect them here.
|
|
*/
|
|
WARN_ON_ONCE(hw_error_code & X86_PF_PK);
|
|
|
|
#ifdef CONFIG_X86_32
|
|
/*
|
|
* We can fault-in kernel-space virtual memory on-demand. The
|
|
* 'reference' page table is init_mm.pgd.
|
|
*
|
|
* NOTE! We MUST NOT take any locks for this case. We may
|
|
* be in an interrupt or a critical region, and should
|
|
* only copy the information from the master page table,
|
|
* nothing more.
|
|
*
|
|
* Before doing this on-demand faulting, ensure that the
|
|
* fault is not any of the following:
|
|
* 1. A fault on a PTE with a reserved bit set.
|
|
* 2. A fault caused by a user-mode access. (Do not demand-
|
|
* fault kernel memory due to user-mode accesses).
|
|
* 3. A fault caused by a page-level protection violation.
|
|
* (A demand fault would be on a non-present page which
|
|
* would have X86_PF_PROT==0).
|
|
*
|
|
* This is only needed to close a race condition on x86-32 in
|
|
* the vmalloc mapping/unmapping code. See the comment above
|
|
* vmalloc_fault() for details. On x86-64 the race does not
|
|
* exist as the vmalloc mappings don't need to be synchronized
|
|
* there.
|
|
*/
|
|
if (!(hw_error_code & (X86_PF_RSVD | X86_PF_USER | X86_PF_PROT))) {
|
|
if (vmalloc_fault(address) >= 0)
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* Was the fault spurious, caused by lazy TLB invalidation? */
|
|
if (spurious_kernel_fault(hw_error_code, address))
|
|
return;
|
|
|
|
/* kprobes don't want to hook the spurious faults: */
|
|
if (kprobe_page_fault(regs, X86_TRAP_PF))
|
|
return;
|
|
|
|
/*
|
|
* Note, despite being a "bad area", there are quite a few
|
|
* acceptable reasons to get here, such as erratum fixups
|
|
* and handling kernel code that can fault, like get_user().
|
|
*
|
|
* Don't take the mm semaphore here. If we fixup a prefetch
|
|
* fault we could otherwise deadlock:
|
|
*/
|
|
bad_area_nosemaphore(regs, hw_error_code, address);
|
|
}
|
|
NOKPROBE_SYMBOL(do_kern_addr_fault);
|
|
|
|
/* Handle faults in the user portion of the address space */
|
|
static inline
|
|
void do_user_addr_fault(struct pt_regs *regs,
|
|
unsigned long hw_error_code,
|
|
unsigned long address)
|
|
{
|
|
struct vm_area_struct *vma = NULL;
|
|
struct task_struct *tsk;
|
|
struct mm_struct *mm;
|
|
vm_fault_t fault;
|
|
unsigned int flags = FAULT_FLAG_DEFAULT;
|
|
|
|
tsk = current;
|
|
mm = tsk->mm;
|
|
|
|
/* kprobes don't want to hook the spurious faults: */
|
|
if (unlikely(kprobe_page_fault(regs, X86_TRAP_PF)))
|
|
return;
|
|
|
|
/*
|
|
* Reserved bits are never expected to be set on
|
|
* entries in the user portion of the page tables.
|
|
*/
|
|
if (unlikely(hw_error_code & X86_PF_RSVD))
|
|
pgtable_bad(regs, hw_error_code, address);
|
|
|
|
/*
|
|
* If SMAP is on, check for invalid kernel (supervisor) access to user
|
|
* pages in the user address space. The odd case here is WRUSS,
|
|
* which, according to the preliminary documentation, does not respect
|
|
* SMAP and will have the USER bit set so, in all cases, SMAP
|
|
* enforcement appears to be consistent with the USER bit.
|
|
*/
|
|
if (unlikely(cpu_feature_enabled(X86_FEATURE_SMAP) &&
|
|
!(hw_error_code & X86_PF_USER) &&
|
|
!(regs->flags & X86_EFLAGS_AC)))
|
|
{
|
|
bad_area_nosemaphore(regs, hw_error_code, address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If we're in an interrupt, have no user context or are running
|
|
* in a region with pagefaults disabled then we must not take the fault
|
|
*/
|
|
if (unlikely(faulthandler_disabled() || !mm)) {
|
|
bad_area_nosemaphore(regs, hw_error_code, address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* It's safe to allow irq's after cr2 has been saved and the
|
|
* vmalloc fault has been handled.
|
|
*
|
|
* User-mode registers count as a user access even for any
|
|
* potential system fault or CPU buglet:
|
|
*/
|
|
if (user_mode(regs)) {
|
|
local_irq_enable();
|
|
flags |= FAULT_FLAG_USER;
|
|
} else {
|
|
if (regs->flags & X86_EFLAGS_IF)
|
|
local_irq_enable();
|
|
}
|
|
|
|
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
|
|
|
|
if (hw_error_code & X86_PF_WRITE)
|
|
flags |= FAULT_FLAG_WRITE;
|
|
if (hw_error_code & X86_PF_INSTR)
|
|
flags |= FAULT_FLAG_INSTRUCTION;
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/*
|
|
* Faults in the vsyscall page might need emulation. The
|
|
* vsyscall page is at a high address (>PAGE_OFFSET), but is
|
|
* considered to be part of the user address space.
|
|
*
|
|
* The vsyscall page does not have a "real" VMA, so do this
|
|
* emulation before we go searching for VMAs.
|
|
*
|
|
* PKRU never rejects instruction fetches, so we don't need
|
|
* to consider the PF_PK bit.
|
|
*/
|
|
if (is_vsyscall_vaddr(address)) {
|
|
if (emulate_vsyscall(hw_error_code, regs, address))
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Do not try to do a speculative page fault if the fault was due to
|
|
* protection keys since it can't be resolved.
|
|
*/
|
|
if (!(hw_error_code & X86_PF_PK)) {
|
|
fault = handle_speculative_fault(mm, address, flags, &vma, regs);
|
|
if (fault != VM_FAULT_RETRY)
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* Kernel-mode access to the user address space should only occur
|
|
* on well-defined single instructions listed in the exception
|
|
* tables. But, an erroneous kernel fault occurring outside one of
|
|
* those areas which also holds mmap_lock might deadlock attempting
|
|
* to validate the fault against the address space.
|
|
*
|
|
* Only do the expensive exception table search when we might be at
|
|
* risk of a deadlock. This happens if we
|
|
* 1. Failed to acquire mmap_lock, and
|
|
* 2. The access did not originate in userspace.
|
|
*/
|
|
if (unlikely(!mmap_read_trylock(mm))) {
|
|
if (!user_mode(regs) && !search_exception_tables(regs->ip)) {
|
|
/*
|
|
* Fault from code in kernel from
|
|
* which we do not expect faults.
|
|
*/
|
|
bad_area_nosemaphore(regs, hw_error_code, address);
|
|
return;
|
|
}
|
|
retry:
|
|
mmap_read_lock(mm);
|
|
} else {
|
|
/*
|
|
* The above down_read_trylock() might have succeeded in
|
|
* which case we'll have missed the might_sleep() from
|
|
* down_read():
|
|
*/
|
|
might_sleep();
|
|
}
|
|
|
|
if (!vma || !can_reuse_spf_vma(vma, address))
|
|
vma = find_vma(mm, address);
|
|
if (unlikely(!vma)) {
|
|
bad_area(regs, hw_error_code, address);
|
|
return;
|
|
}
|
|
if (likely(vma->vm_start <= address))
|
|
goto good_area;
|
|
if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
|
|
bad_area(regs, hw_error_code, address);
|
|
return;
|
|
}
|
|
if (unlikely(expand_stack(vma, address))) {
|
|
bad_area(regs, hw_error_code, address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Ok, we have a good vm_area for this memory access, so
|
|
* we can handle it..
|
|
*/
|
|
good_area:
|
|
if (unlikely(access_error(hw_error_code, vma))) {
|
|
bad_area_access_error(regs, hw_error_code, address, vma);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If for any reason at all we couldn't handle the fault,
|
|
* make sure we exit gracefully rather than endlessly redo
|
|
* the fault. Since we never set FAULT_FLAG_RETRY_NOWAIT, if
|
|
* we get VM_FAULT_RETRY back, the mmap_lock has been unlocked.
|
|
*
|
|
* Note that handle_userfault() may also release and reacquire mmap_lock
|
|
* (and not return with VM_FAULT_RETRY), when returning to userland to
|
|
* repeat the page fault later with a VM_FAULT_NOPAGE retval
|
|
* (potentially after handling any pending signal during the return to
|
|
* userland). The return to userland is identified whenever
|
|
* FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in flags.
|
|
*/
|
|
fault = handle_mm_fault(vma, address, flags, regs);
|
|
|
|
/* Quick path to respond to signals */
|
|
if (fault_signal_pending(fault, regs)) {
|
|
if (!user_mode(regs))
|
|
no_context(regs, hw_error_code, address, SIGBUS,
|
|
BUS_ADRERR);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If we need to retry the mmap_lock has already been released,
|
|
* and if there is a fatal signal pending there is no guarantee
|
|
* that we made any progress. Handle this case first.
|
|
*/
|
|
if (unlikely((fault & VM_FAULT_RETRY) &&
|
|
(flags & FAULT_FLAG_ALLOW_RETRY))) {
|
|
flags |= FAULT_FLAG_TRIED;
|
|
|
|
/*
|
|
* Do not try to reuse this vma and fetch it
|
|
* again since we will release the mmap_sem.
|
|
*/
|
|
vma = NULL;
|
|
|
|
goto retry;
|
|
}
|
|
|
|
mmap_read_unlock(mm);
|
|
|
|
done:
|
|
if (unlikely(fault & VM_FAULT_ERROR)) {
|
|
mm_fault_error(regs, hw_error_code, address, fault);
|
|
return;
|
|
}
|
|
|
|
check_v8086_mode(regs, address, tsk);
|
|
}
|
|
NOKPROBE_SYMBOL(do_user_addr_fault);
|
|
|
|
static __always_inline void
|
|
trace_page_fault_entries(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address)
|
|
{
|
|
if (!trace_pagefault_enabled())
|
|
return;
|
|
|
|
if (user_mode(regs))
|
|
trace_page_fault_user(address, regs, error_code);
|
|
else
|
|
trace_page_fault_kernel(address, regs, error_code);
|
|
}
|
|
|
|
static __always_inline void
|
|
handle_page_fault(struct pt_regs *regs, unsigned long error_code,
|
|
unsigned long address)
|
|
{
|
|
trace_page_fault_entries(regs, error_code, address);
|
|
|
|
if (unlikely(kmmio_fault(regs, address)))
|
|
return;
|
|
|
|
/* Was the fault on kernel-controlled part of the address space? */
|
|
if (unlikely(fault_in_kernel_space(address))) {
|
|
do_kern_addr_fault(regs, error_code, address);
|
|
} else {
|
|
do_user_addr_fault(regs, error_code, address);
|
|
/*
|
|
* User address page fault handling might have reenabled
|
|
* interrupts. Fixing up all potential exit points of
|
|
* do_user_addr_fault() and its leaf functions is just not
|
|
* doable w/o creating an unholy mess or turning the code
|
|
* upside down.
|
|
*/
|
|
local_irq_disable();
|
|
}
|
|
}
|
|
|
|
DEFINE_IDTENTRY_RAW_ERRORCODE(exc_page_fault)
|
|
{
|
|
unsigned long address = read_cr2();
|
|
irqentry_state_t state;
|
|
|
|
prefetchw(¤t->mm->mmap_lock);
|
|
|
|
/*
|
|
* KVM uses #PF vector to deliver 'page not present' events to guests
|
|
* (asynchronous page fault mechanism). The event happens when a
|
|
* userspace task is trying to access some valid (from guest's point of
|
|
* view) memory which is not currently mapped by the host (e.g. the
|
|
* memory is swapped out). Note, the corresponding "page ready" event
|
|
* which is injected when the memory becomes available, is delived via
|
|
* an interrupt mechanism and not a #PF exception
|
|
* (see arch/x86/kernel/kvm.c: sysvec_kvm_asyncpf_interrupt()).
|
|
*
|
|
* We are relying on the interrupted context being sane (valid RSP,
|
|
* relevant locks not held, etc.), which is fine as long as the
|
|
* interrupted context had IF=1. We are also relying on the KVM
|
|
* async pf type field and CR2 being read consistently instead of
|
|
* getting values from real and async page faults mixed up.
|
|
*
|
|
* Fingers crossed.
|
|
*
|
|
* The async #PF handling code takes care of idtentry handling
|
|
* itself.
|
|
*/
|
|
if (kvm_handle_async_pf(regs, (u32)address))
|
|
return;
|
|
|
|
/*
|
|
* Entry handling for valid #PF from kernel mode is slightly
|
|
* different: RCU is already watching and rcu_irq_enter() must not
|
|
* be invoked because a kernel fault on a user space address might
|
|
* sleep.
|
|
*
|
|
* In case the fault hit a RCU idle region the conditional entry
|
|
* code reenabled RCU to avoid subsequent wreckage which helps
|
|
* debugability.
|
|
*/
|
|
state = irqentry_enter(regs);
|
|
|
|
instrumentation_begin();
|
|
handle_page_fault(regs, error_code, address);
|
|
instrumentation_end();
|
|
|
|
irqentry_exit(regs, state);
|
|
}
|