791d3ef2e1
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
36 lines
805 B
Plaintext
36 lines
805 B
Plaintext
sii902x HDMI bridge bindings
|
|
|
|
Required properties:
|
|
- compatible: "sil,sii9022"
|
|
- reg: i2c address of the bridge
|
|
|
|
Optional properties:
|
|
- interrupts: describe the interrupt line used to inform the host
|
|
about hotplug events.
|
|
- reset-gpios: OF device-tree gpio specification for RST_N pin.
|
|
|
|
Optional subnodes:
|
|
- video input: this subnode can contain a video input port node
|
|
to connect the bridge to a display controller output (See this
|
|
documentation [1]).
|
|
|
|
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
|
|
Example:
|
|
hdmi-bridge@39 {
|
|
compatible = "sil,sii9022";
|
|
reg = <0x39>;
|
|
reset-gpios = <&pioA 1 0>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
bridge_in: endpoint {
|
|
remote-endpoint = <&dc_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|