Files
android_kernel_xiaomi_sm8450/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
Laurent Pinchart b4935e3a3c drm/omap: Store bus flags in the omap_dss_device structure
Source components in the display pipeline need to configure their output
signals polarities and clock driving edge based on the requirements of
the sink component.

Those requirements are currently shared across the whole pipeline in the
flags of a videomode structure, instead of being local to each bus. This
both prevents multiple buses from having different configurations (when
the hardware supports it), and makes it difficult to move from videomode
to drm_display_mode as the latter doesn't contain bus polarities and
clock edge flags.

Add a bus_flags field to the omap_dss_device structure and move the
DISPLAY_FLAGS_DE_(LOW|HIGH), DISPLAY_FLAGS_PIXDATA_(POS|NEG)EDGE and
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE videomode flags to bus_flags in all
external encoders, connectors and panels. The videomode flags are still
used internally for internal encoders, this will be addressed in a
second step.

The related videomode flags in the default mode of the DVI connector can
simply be dropped, as they are always overridden by the TFP410 driver.
Note that this results in both the DISPLAY_FLAGS_SYNC_POSEDGE and
DISPLAY_FLAGS_SYNC_NEGEDGE flags being set, which is invalid, but only
the former is tested for when programming the DISPC, so the DVI
connector flags are effectively overridden by the TFP410 flags.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-09-03 16:13:30 +03:00

189 lines
4.5 KiB
C

/*
* TFP410 DPI-to-DVI encoder driver
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct gpio_desc *pd_gpio;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int tfp410_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void tfp410_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
omapdss_device_disconnect(dst, dst->next);
}
static int tfp410_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
int r;
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
r = src->ops->enable(src);
if (r)
return r;
if (ddata->pd_gpio)
gpiod_set_value_cansleep(ddata->pd_gpio, 0);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void tfp410_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
if (!omapdss_device_is_enabled(dssdev))
return;
if (ddata->pd_gpio)
gpiod_set_value_cansleep(ddata->pd_gpio, 0);
src->ops->disable(src);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void tfp410_set_timings(struct omap_dss_device *dssdev,
const struct videomode *vm)
{
struct omap_dss_device *src = dssdev->src;
src->ops->set_timings(src, vm);
}
static int tfp410_check_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
struct omap_dss_device *src = dssdev->src;
return src->ops->check_timings(src, vm);
}
static const struct omap_dss_device_ops tfp410_ops = {
.connect = tfp410_connect,
.disconnect = tfp410_disconnect,
.enable = tfp410_enable,
.disable = tfp410_disable,
.check_timings = tfp410_check_timings,
.set_timings = tfp410_set_timings,
};
static int tfp410_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
struct gpio_desc *gpio;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
/* Powerdown GPIO */
gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown", GPIOD_OUT_HIGH);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "failed to parse powerdown gpio\n");
return PTR_ERR(gpio);
}
ddata->pd_gpio = gpio;
dssdev = &ddata->dssdev;
dssdev->ops = &tfp410_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
dssdev->next = omapdss_of_find_connected_device(pdev->dev.of_node, 1);
if (IS_ERR(dssdev->next)) {
if (PTR_ERR(dssdev->next) != -EPROBE_DEFER)
dev_err(&pdev->dev, "failed to find video sink\n");
return PTR_ERR(dssdev->next);
}
omapdss_device_register(dssdev);
return 0;
}
static int __exit tfp410_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
if (dssdev->next)
omapdss_device_put(dssdev->next);
omapdss_device_unregister(&ddata->dssdev);
WARN_ON(omapdss_device_is_enabled(dssdev));
if (omapdss_device_is_enabled(dssdev))
tfp410_disable(dssdev);
WARN_ON(omapdss_device_is_connected(dssdev));
if (omapdss_device_is_connected(dssdev))
omapdss_device_disconnect(NULL, dssdev);
return 0;
}
static const struct of_device_id tfp410_of_match[] = {
{ .compatible = "omapdss,ti,tfp410", },
{},
};
MODULE_DEVICE_TABLE(of, tfp410_of_match);
static struct platform_driver tfp410_driver = {
.probe = tfp410_probe,
.remove = __exit_p(tfp410_remove),
.driver = {
.name = "tfp410",
.of_match_table = tfp410_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(tfp410_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
MODULE_LICENSE("GPL");