badeb7fe24
[ Upstream commit e3f2778b1b6ced649bffdc7cbb05b80bb92f2108 ]
The audio routing flow is not correct, the flow should be from source
(second element in the pair) to sink (first element in the pair). The
flow now is from "HP_OUT" to "Playback", where "Playback" is source
and "HP_OUT" is sink, i.e. the direction is swapped and there is no
direct link between the two either.
Fill in the correct routing, where "HP_OUT" supplies the "Headphone Jack",
"Line In Jack" supplies "LINE_IN" input, "Microphone Jack" supplies "MIC_IN"
input and "Mic Bias" supplies "Microphone Jack".
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
316 lines
6.1 KiB
Plaintext
316 lines
6.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart4;
|
|
serial1 = &usart3;
|
|
serial2 = &uart8;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clk_ext_audio_codec: clock-codec {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
display_bl: display-bl {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
|
|
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
|
|
default-brightness-level = <8>;
|
|
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
poll-interval = <20>;
|
|
|
|
/*
|
|
* The EXTi IRQ line 3 is shared with ethernet,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-0 {
|
|
label = "TA1-GPIO-A";
|
|
linux,code = <KEY_A>;
|
|
gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/*
|
|
* The EXTi IRQ line 6 is shared with touchscreen,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-1 {
|
|
label = "TA2-GPIO-B";
|
|
linux,code = <KEY_B>;
|
|
gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/*
|
|
* The EXTi IRQ line 0 is shared with PMIC,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-2 {
|
|
label = "TA3-GPIO-C";
|
|
linux,code = <KEY_C>;
|
|
gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-3 {
|
|
label = "TA4-GPIO-D";
|
|
linux,code = <KEY_D>;
|
|
gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
led {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "green:led5";
|
|
gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
status = "disabled";
|
|
};
|
|
|
|
led-1 {
|
|
label = "green:led6";
|
|
gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-2 {
|
|
label = "green:led7";
|
|
gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-3 {
|
|
label = "green:led8";
|
|
gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
panel {
|
|
compatible = "edt,etm0700g0edh6";
|
|
backlight = <&display_bl>;
|
|
|
|
port {
|
|
lcd_panel_in: endpoint {
|
|
remote-endpoint = <&lcd_display_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "audio-graph-card";
|
|
widgets = "Headphone", "Headphone Jack",
|
|
"Line", "Line In Jack",
|
|
"Microphone", "Microphone Jack";
|
|
routing = "Headphone Jack", "HP_OUT",
|
|
"LINE_IN", "Line In Jack",
|
|
"MIC_IN", "Microphone Jack",
|
|
"Microphone Jack", "Mic Bias";
|
|
dais = <&sai2a_port &sai2b_port>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&cec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cec_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 { /* Header X22 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c5 { /* Header X21 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
sgtl5000: codec@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
#sound-dai-cells = <0>;
|
|
clocks = <&clk_ext_audio_codec>;
|
|
VDDA-supply = <&v3v3>;
|
|
VDDIO-supply = <&vdd>;
|
|
|
|
sgtl5000_port: port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sgtl5000_tx_endpoint: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&sai2a_endpoint>;
|
|
frame-master = <&sgtl5000_tx_endpoint>;
|
|
bitclock-master = <&sgtl5000_tx_endpoint>;
|
|
};
|
|
|
|
sgtl5000_rx_endpoint: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&sai2b_endpoint>;
|
|
frame-master = <&sgtl5000_rx_endpoint>;
|
|
bitclock-master = <&sgtl5000_rx_endpoint>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
touchscreen@38 {
|
|
compatible = "edt,edt-ft5406";
|
|
reg = <0x38>;
|
|
interrupt-parent = <&gpioc>;
|
|
interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
|
|
};
|
|
};
|
|
|
|
<dc {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <<dc_pins_b>;
|
|
pinctrl-1 = <<dc_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
port {
|
|
lcd_display_out: endpoint {
|
|
remote-endpoint = <&lcd_panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sai2 {
|
|
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
|
clock-names = "pclk", "x8k", "x11k";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
|
|
pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
sai2a: audio-controller@4400b004 {
|
|
#clock-cells = <0>;
|
|
dma-names = "tx";
|
|
clocks = <&rcc SAI2_K>;
|
|
clock-names = "sai_ck";
|
|
status = "okay";
|
|
|
|
sai2a_port: port {
|
|
sai2a_endpoint: endpoint {
|
|
remote-endpoint = <&sgtl5000_tx_endpoint>;
|
|
format = "i2s";
|
|
mclk-fs = <512>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <16>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sai2b: audio-controller@4400b024 {
|
|
dma-names = "rx";
|
|
st,sync = <&sai2a 2>;
|
|
clocks = <&rcc SAI2_K>, <&sai2a>;
|
|
clock-names = "sai_ck", "MCLK";
|
|
status = "okay";
|
|
|
|
sai2b_port: port {
|
|
sai2b_endpoint: endpoint {
|
|
remote-endpoint = <&sgtl5000_rx_endpoint>;
|
|
format = "i2s";
|
|
mclk-fs = <512>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <16>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&timers2 {
|
|
/* spare dmas for other usage (un-delete to enable pwm capture) */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
pwm2: pwm {
|
|
pinctrl-0 = <&pwm2_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
timer@1 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&usart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usart3_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart8 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ehci {
|
|
phys = <&usbphyc_port0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "otg";
|
|
pinctrl-0 = <&usbotg_hs_pins_a>;
|
|
pinctrl-names = "default";
|
|
phy-names = "usb2-phy";
|
|
phys = <&usbphyc_port1 0>;
|
|
vbus-supply = <&vbus_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
phy-supply = <&vdd_usb>;
|
|
vdda1v1-supply = <®11>;
|
|
vdda1v8-supply = <®18>;
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
phy-supply = <&vdd_usb>;
|
|
vdda1v1-supply = <®11>;
|
|
vdda1v8-supply = <®18>;
|
|
};
|