Luis R. Rodriguez 80b99932fd ath9k_hw: shift code for AR9280 OLC temp comp ...

We're bailing out on the alternative code path so remove the
else branch.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

2010-04-16 15:43:29 -04:00

..

ahb.c

ath: Add a bus type field

2010-04-06 16:55:09 -04:00

ani.c

ath9k_hw: Split off ANI control to the PHY ops

2010-04-16 15:43:25 -04:00

ani.h

ath9k: Nuke struct ath9k_node_stats

2009-08-20 11:36:08 -04:00

ar5008_initvals.h

ath9k_hw: split initvals.h by hardware family

2010-04-16 15:43:24 -04:00

ar5008_phy.c

ath9k_hw: Split out the function for reading the noise floor

2010-04-16 15:43:27 -04:00

ar9001_initvals.h

ath9k_hw: split initvals.h by hardware family

2010-04-16 15:43:24 -04:00

ar9002_initvals.h

ath9k_hw: split initvals.h by hardware family

2010-04-16 15:43:24 -04:00

ar9002_phy.c

ath9k_hw: Split out the function for reading the noise floor

2010-04-16 15:43:27 -04:00

ar9002_phy.h

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

ar9003_initvals.h

ath9k_hw: add initvals for the AR9003 hardware family

2010-04-16 15:43:24 -04:00

ar9003_mac.c

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

ar9003_mac.h

ath9k_hw: Define tx control struct for AR9003

2010-04-16 15:43:25 -04:00

ar9003_phy.c

ath9k_hw: Split out the function for reading the noise floor

2010-04-16 15:43:27 -04:00

ar9003_phy.h

ath9k_hw: add helpers for processing the AR9003 INI

2010-04-16 15:43:24 -04:00

ath9k.h

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

beacon.c

ath9k_hw: Move code which populates ds_data to ath9k_hw

2010-04-16 15:43:25 -04:00

btcoex.c

ath9k: move hw code to its own module

2009-10-07 16:39:41 -04:00

btcoex.h

ath9k: Fix wifi disconnection when collocated bt scan is active

2010-01-22 16:11:32 -05:00

calib.c

ath9k_hw: shift code for AR9280 OLC temp comp

2010-04-16 15:43:29 -04:00

calib.h

atheros: add common debug printing

2009-10-07 16:39:29 -04:00

common.c

ath9k: Do not indicate RX_FLAG_DECRYPTED for unprotected frames

2010-03-31 14:46:42 -04:00

common.h

ath9k: Make bf_desc of ath_buf opaque

2010-04-16 15:43:26 -04:00

debug.c

wireless/ath: remove trailing space in messages

2010-04-08 15:20:44 -04:00

debug.h

ath9k: fix compile error without debug enabled

2010-04-06 16:55:09 -04:00

eeprom_4k.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

eeprom_9287.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

eeprom_def.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

eeprom.c

ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup

2010-04-16 15:43:28 -04:00

eeprom.h

ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup

2010-04-16 15:43:28 -04:00

gpio.c

wireless/ath: remove trailing space in messages

2010-04-08 15:20:44 -04:00

hif_usb.c

ath9k-htc: fix lockdep warning and kernel warning after unplugging ar9271 usb device

2010-04-14 14:58:37 -04:00

hif_usb.h

ath9k_htc: Use anchors for REGOUT pipe

2010-04-08 15:24:10 -04:00

htc_drv_beacon.c

ath9k_htc: Configure the beacon timers once the scan is completed.

2010-04-07 14:37:59 -04:00

htc_drv_init.c

ath9k_htc: Add support for power save.

2010-04-07 14:37:58 -04:00

htc_drv_main.c

ath9k_htc: Configure the beacon timers once the scan is completed.

2010-04-07 14:37:59 -04:00

htc_drv_txrx.c

ath9k_htc: Add support for power save.

2010-04-07 14:37:58 -04:00

htc_hst.c

ath9k-htc:respect usb buffer cacheline alignment in reg out path

2010-04-14 14:52:43 -04:00

htc_hst.h

ath9k_htc: Support for AR9271 chipset.

2010-03-23 16:50:17 -04:00

htc.h

ath9k_htc: Configure the beacon timers once the scan is completed.

2010-04-07 14:37:59 -04:00

hw-ops.h

ath9k_hw: Split out the function for reading the noise floor

2010-04-16 15:43:27 -04:00

hw.c

ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup

2010-04-16 15:43:28 -04:00

hw.h

ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup

2010-04-16 15:43:28 -04:00

init.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

Kconfig

ath9k_htc: Support for AR9271 chipset.

2010-03-23 16:50:17 -04:00

mac.c

ath9k_hw: Add abstraction to set/get link pointer

2010-04-16 15:43:25 -04:00

mac.h

ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose

2010-04-16 15:43:26 -04:00

main.c

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

Makefile

ath9k_hw: Fill rx_enable() for the AR9003 hardware family

2010-04-16 15:43:22 -04:00

pci.c

ath: Add a bus type field

2010-04-06 16:55:09 -04:00

phy.h

ath9k_hw: add common channel select helpers for ar900[23]

2010-04-16 15:43:23 -04:00

rc.c

ath9k: fix rate control tx status handling for A-MPDU

2010-03-10 17:44:45 -05:00

rc.h

ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusion

2010-04-06 16:55:08 -04:00

recv.c

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

reg.h

ath9k_hw: add helpers for processing the AR9003 INI

2010-04-16 15:43:24 -04:00

virtual.c

ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusion

2010-04-06 16:55:08 -04:00

wmi.c

ath9k-htc:respect usb buffer cacheline alignment in reg out path

2010-04-14 14:52:43 -04:00

wmi.h

ath9k_htc: Support for AR9271 chipset.

2010-03-23 16:50:17 -04:00

xmit.c

ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose

2010-04-16 15:43:26 -04:00