8060ef4da9
This patch adds support to configure the AEMIF interface with supplied timing values. Since this capability is useful both from NOR and NAND flashes, it is provided as a new interface and in a file of its own. AEMIF timing configuration is required in cases: 1) Where the AEMIF clock rate can change at runtime (a side affect of cpu frequency change). 2) Where U-Boot does not support NAND/NOR but supports other media like SPI Flash or MMC/SD and thus does not care about setting up the AEMIF timing for kernel to use. 3) Where U-Boot just hasn't configured the timing values and cannot be upgraded because the box is already in the field. Since there is now a header file for AEMIF interface, the common (non-NAND specific) defines for AEMIF registers have been moved from nand.h into the newly created aemif.h Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
86 lines
2.6 KiB
C
86 lines
2.6 KiB
C
/*
|
|
* mach-davinci/nand.h
|
|
*
|
|
* Copyright © 2006 Texas Instruments.
|
|
*
|
|
* Ported to 2.6.23 Copyright © 2008 by
|
|
* Sander Huijsen <Shuijsen@optelecom-nkf.com>
|
|
* Troy Kisky <troy.kisky@boundarydevices.com>
|
|
* Dirk Behme <Dirk.Behme@gmail.com>
|
|
*
|
|
* --------------------------------------------------------------------------
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef __ARCH_ARM_DAVINCI_NAND_H
|
|
#define __ARCH_ARM_DAVINCI_NAND_H
|
|
|
|
#include <linux/mtd/nand.h>
|
|
|
|
#define NANDFCR_OFFSET 0x60
|
|
#define NANDFSR_OFFSET 0x64
|
|
#define NANDF1ECC_OFFSET 0x70
|
|
|
|
/* 4-bit ECC syndrome registers */
|
|
#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc
|
|
#define NAND_4BIT_ECC1_OFFSET 0xc0
|
|
#define NAND_4BIT_ECC2_OFFSET 0xc4
|
|
#define NAND_4BIT_ECC3_OFFSET 0xc8
|
|
#define NAND_4BIT_ECC4_OFFSET 0xcc
|
|
#define NAND_ERR_ADD1_OFFSET 0xd0
|
|
#define NAND_ERR_ADD2_OFFSET 0xd4
|
|
#define NAND_ERR_ERRVAL1_OFFSET 0xd8
|
|
#define NAND_ERR_ERRVAL2_OFFSET 0xdc
|
|
|
|
/* NOTE: boards don't need to use these address bits
|
|
* for ALE/CLE unless they support booting from NAND.
|
|
* They're used unless platform data overrides them.
|
|
*/
|
|
#define MASK_ALE 0x08
|
|
#define MASK_CLE 0x10
|
|
|
|
struct davinci_nand_pdata { /* platform_data */
|
|
uint32_t mask_ale;
|
|
uint32_t mask_cle;
|
|
|
|
/* for packages using two chipselects */
|
|
uint32_t mask_chipsel;
|
|
|
|
/* board's default static partition info */
|
|
struct mtd_partition *parts;
|
|
unsigned nr_parts;
|
|
|
|
/* none == NAND_ECC_NONE (strongly *not* advised!!)
|
|
* soft == NAND_ECC_SOFT
|
|
* else == NAND_ECC_HW, according to ecc_bits
|
|
*
|
|
* All DaVinci-family chips support 1-bit hardware ECC.
|
|
* Newer ones also support 4-bit ECC, but are awkward
|
|
* using it with large page chips.
|
|
*/
|
|
nand_ecc_modes_t ecc_mode;
|
|
u8 ecc_bits;
|
|
|
|
/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
|
|
unsigned options;
|
|
|
|
/* Main and mirror bbt descriptor overrides */
|
|
struct nand_bbt_descr *bbt_td;
|
|
struct nand_bbt_descr *bbt_md;
|
|
};
|
|
|
|
#endif /* __ARCH_ARM_DAVINCI_NAND_H */
|