Jean-Christophe PLAGNIOL-VILLARD 7eb1dbb3be ARM: at91: move at91_init_leds to board init ...

This will also allow to finally move the gpio driver to platform device/driver.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

2012-04-17 11:06:32 +02:00

..

include/mach

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91rm9200_devices.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91rm9200_time.c

ARM: at91/ST: remove not needed casts

2012-02-23 09:26:31 +01:00

at91rm9200.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9_alt_reset.S

ARM: at91: make sdram/ddr register base soc independent

2012-02-23 14:57:56 +01:00

at91sam9g45_devices.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9g45_reset.S

ARM: at91: make sdram/ddr register base soc independent

2012-02-23 14:57:56 +01:00

at91sam9g45.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9rl_devices.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9rl.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9x5.c

ARM: at91/at91sam9x5: add clkdev entries for DMA controllers

2012-04-02 11:55:19 +02:00

at91sam926x_time.c

ARM: at91/pit: add traces in case of error

2012-03-01 13:38:48 +01:00

at91sam9260_devices.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9260.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9261_devices.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9261.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9263_devices.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91sam9263.c

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

at91x40_time.c

ARM: at91/at91x40: remove use of at91_sys_read/write

2012-02-17 17:54:05 +01:00

at91x40.c

ARM: fix builds due to missing <asm/system_misc.h> includes

2012-03-30 15:44:40 -07:00

board-1arm.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-afeb-9260v1.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-cam60.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-carmeva.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-cpu9krea.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-cpuat91.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-csb337.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-csb637.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-dt.c

ARM: at91/dt: add specific DT soc init

2012-03-15 23:30:05 +08:00

board-eb01.c

at91: fix map_io init usage

2011-05-25 23:04:34 +08:00

board-eb9200.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-ecbat91.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-eco920.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-flexibity.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-foxg20.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-gsia18s.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-kafa.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-kb9202.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-neocore926.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-pcontrol-g20.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-picotux200.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-qil-a9260.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-rm9200dk.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-rm9200ek.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-rsi-ews.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-sam9-l9260.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-sam9g20ek.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-sam9m10g45ek.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-sam9rlek.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-sam9260ek.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-sam9261ek.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

board-sam9263ek.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-snapper9260.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-stamp9g20.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-usb-a926x.c

ARM: at91: do not pin mux the UARTs in init_early

2012-04-17 11:04:42 +02:00

board-yl-9200.c

ARM: at91: move at91_init_leds to board init

2012-04-17 11:06:32 +02:00

clock.c

ARM: at91: add pmc DT support

2012-03-15 23:31:14 +08:00

clock.h

at91: switch to CLKDEV_LOOKUP

2011-05-25 23:04:34 +08:00

cpuidle.c

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

2012-03-30 16:45:39 -07:00

generic.h

ARM: at91: drop at91_set_serial_console

2012-04-17 11:03:46 +02:00

gpio.c

ARM: at91/pio: add new PIO3 features

2012-03-01 13:38:50 +01:00

irq.c

ARM: at91: AIC and GPIO IRQ device tree initialization

2012-03-01 13:29:03 +01:00

Kconfig

ARM: at91: uncompress: autodetect the uart to use

2012-04-17 11:00:19 +02:00

leds.c

ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.h

2011-08-08 14:27:41 +01:00

Makefile

ARM: at91: add sam9_smc.o to at91sam9x5 build

2012-03-01 13:38:49 +01:00

Makefile.boot

ARM: at91: properly sort dtb files in Makefile.boot

2012-02-23 14:58:00 +01:00

pm_slowclock.S

ARM: at91/PMC: make register base soc independent

2012-02-23 14:57:57 +01:00

pm.c

ARM: at91: add ram controller DT support

2012-03-15 23:37:56 +08:00

pm.h

ARM: at91: make sdram/ddr register base soc independent

2012-02-23 14:57:56 +01:00

sam9_smc.c

ARM: at91: add accessor to manage SMC

2012-02-13 18:31:36 +01:00

sam9_smc.h

ARM: at91: add accessor to manage SMC

2012-02-13 18:31:36 +01:00

setup.c

ARM: fix builds due to missing <asm/system_misc.h> includes

2012-03-30 15:44:40 -07:00

soc.h

ARM: at91: code removal of CAP9 SoC

2012-02-03 13:33:05 +01:00