Luis R. Rodriguez 795f5e2ca6 ath9k_hw: split calib code by hardware families ...

Calibration code touches phy registers and since these
change the calibration code needs to be abstracted.

Noise floor calibration is the only thing remaining but
since the remaining calls only touch the AR_PHY_AGC_CONTROL
register we'll just define that register conditionally, that
will be done separately. The goal is to remove the dependency
of ar9002_phy.h on calib.c

This also adds stubs to be filled for AR9003 calibration code.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

2010-04-16 15:43:31 -04:00

..

ahb.c

ath: Add a bus type field

2010-04-06 16:55:09 -04:00

ani.c

ath9k_hw: Split off ANI control to the PHY ops

2010-04-16 15:43:25 -04:00

ani.h

ath9k: Nuke struct ath9k_node_stats

2009-08-20 11:36:08 -04:00

ar5008_initvals.h

ath9k_hw: split initvals.h by hardware family

2010-04-16 15:43:24 -04:00

ar5008_phy.c

ath9k_hw: Split out the function for reading the noise floor

2010-04-16 15:43:27 -04:00

ar9001_initvals.h

ath9k_hw: split initvals.h by hardware family

2010-04-16 15:43:24 -04:00

ar9002_calib.c

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

ar9002_initvals.h

ath9k_hw: split initvals.h by hardware family

2010-04-16 15:43:24 -04:00

ar9002_phy.c

ath9k_hw: Split out the function for reading the noise floor

2010-04-16 15:43:27 -04:00

ar9002_phy.h

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

ar9003_calib.c

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

ar9003_initvals.h

ath9k_hw: add initvals for the AR9003 hardware family

2010-04-16 15:43:24 -04:00

ar9003_mac.c

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

ar9003_mac.h

ath9k_hw: Define tx control struct for AR9003

2010-04-16 15:43:25 -04:00

ar9003_phy.c

ath9k_hw: Split out the function for reading the noise floor

2010-04-16 15:43:27 -04:00

ar9003_phy.h

ath9k_hw: add helpers for processing the AR9003 INI

2010-04-16 15:43:24 -04:00

ath9k.h

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

beacon.c

ath9k_hw: Move code which populates ds_data to ath9k_hw

2010-04-16 15:43:25 -04:00

btcoex.c

ath9k: move hw code to its own module

2009-10-07 16:39:41 -04:00

btcoex.h

ath9k: Fix wifi disconnection when collocated bt scan is active

2010-01-22 16:11:32 -05:00

calib.c

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

calib.h

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

common.c

ath9k: Do not indicate RX_FLAG_DECRYPTED for unprotected frames

2010-03-31 14:46:42 -04:00

common.h

ath9k: Make bf_desc of ath_buf opaque

2010-04-16 15:43:26 -04:00

debug.c

wireless/ath: remove trailing space in messages

2010-04-08 15:20:44 -04:00

debug.h

ath9k: fix compile error without debug enabled

2010-04-06 16:55:09 -04:00

eeprom_4k.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

eeprom_9287.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

eeprom_def.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

eeprom.c

ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup

2010-04-16 15:43:28 -04:00

eeprom.h

ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup

2010-04-16 15:43:28 -04:00

gpio.c

wireless/ath: remove trailing space in messages

2010-04-08 15:20:44 -04:00

hif_usb.c

ath9k-htc: fix lockdep warning and kernel warning after unplugging ar9271 usb device

2010-04-14 14:58:37 -04:00

hif_usb.h

ath9k_htc: Use anchors for REGOUT pipe

2010-04-08 15:24:10 -04:00

htc_drv_beacon.c

ath9k_htc: Configure the beacon timers once the scan is completed.

2010-04-07 14:37:59 -04:00

htc_drv_init.c

ath9k_htc: Add support for power save.

2010-04-07 14:37:58 -04:00

htc_drv_main.c

ath9k_htc: Configure the beacon timers once the scan is completed.

2010-04-07 14:37:59 -04:00

htc_drv_txrx.c

ath9k_htc: Add support for power save.

2010-04-07 14:37:58 -04:00

htc_hst.c

ath9k-htc:respect usb buffer cacheline alignment in reg out path

2010-04-14 14:52:43 -04:00

htc_hst.h

ath9k_htc: Support for AR9271 chipset.

2010-03-23 16:50:17 -04:00

htc.h

ath9k_htc: Configure the beacon timers once the scan is completed.

2010-04-07 14:37:59 -04:00

hw-ops.h

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

hw.c

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

hw.h

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

init.c

ath9k_hw: Move some RF ops to the private callbacks

2010-04-16 15:43:19 -04:00

Kconfig

ath9k_htc: Support for AR9271 chipset.

2010-03-23 16:50:17 -04:00

mac.c

ath9k_hw: Add abstraction to set/get link pointer

2010-04-16 15:43:25 -04:00

mac.h

ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose

2010-04-16 15:43:26 -04:00

main.c

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

Makefile

ath9k_hw: split calib code by hardware families

2010-04-16 15:43:31 -04:00

pci.c

ath: Add a bus type field

2010-04-06 16:55:09 -04:00

phy.h

ath9k_hw: add common channel select helpers for ar900[23]

2010-04-16 15:43:23 -04:00

rc.c

ath9k: fix rate control tx status handling for A-MPDU

2010-03-10 17:44:45 -05:00

rc.h

ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusion

2010-04-06 16:55:08 -04:00

recv.c

ath9k: Add Rx EDMA support

2010-04-16 15:43:26 -04:00

reg.h

ath9k_hw: add helpers for processing the AR9003 INI

2010-04-16 15:43:24 -04:00

virtual.c

ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusion

2010-04-06 16:55:08 -04:00

wmi.c

ath9k-htc:respect usb buffer cacheline alignment in reg out path

2010-04-14 14:52:43 -04:00

wmi.h

ath9k_htc: Support for AR9271 chipset.

2010-03-23 16:50:17 -04:00

xmit.c

ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose

2010-04-16 15:43:26 -04:00