Lorenzo Bianconi bbd10586f0 mt76x0: phy: do not run calibration during channel switch ...

Do not perform phy/vga calibration during channel switch.
Moreover remove mt76x0_agc_save and mt76x0_agc_restore routines
since they are no longer necessary. Furthermore run mt76_set_channel
in order to check if there are pending frames during channel switch

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

2018-10-13 17:39:53 +02:00

..

mt76x0

mt76x0: phy: do not run calibration during channel switch

2018-10-13 17:39:53 +02:00

mt76x2

mt76: introduce mt76x02_init_agc_gain routine

2018-10-13 17:39:50 +02:00

agg-rx.c

mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signatures

2018-08-02 21:47:57 +03:00

debugfs.c

mt76: move rate_txpower handler in mt76 debugfs

2018-10-01 12:34:02 +02:00

dma.c

mt76: use a per rx queue page fragment cache

2018-09-19 12:31:44 +02:00

dma.h

mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.h

2018-09-19 12:31:25 +02:00

eeprom.c

…

Kconfig

mt76x2: move mt76x2 source files to mt76x2 folder

2018-10-05 20:05:44 +02:00

mac80211.c

mt76: fix handling ps-poll frames

2018-10-01 12:34:45 +02:00

Makefile

mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle

2018-10-05 20:05:46 +02:00

mmio.c

mt76: allow to identify bus

2018-10-13 17:39:11 +02:00

mt76.h

mt76: allow to identify bus

2018-10-13 17:39:11 +02:00

mt76x02_dfs.h

mt76x2: move mt76x2_dev in mt76x02_util.h

2018-10-05 20:05:45 +02:00

mt76x02_dma.h

mt76: move tx_tasklet management in mt76x02-lib moudle

2018-10-05 20:05:46 +02:00

mt76x02_eeprom.c

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c

2018-10-13 17:39:24 +02:00

mt76x02_eeprom.h

mt76x0: eeprom: introduce mt76x0_tssi_enabled routine

2018-10-13 17:39:46 +02:00

mt76x02_mac.c

mt76: disable ldpc coding for mt76x0 devices

2018-10-13 17:39:28 +02:00

mt76x02_mac.h

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c

2018-10-13 17:39:22 +02:00

mt76x02_mcu.c

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c

2018-10-13 17:39:16 +02:00

mt76x02_mcu.h

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c

2018-10-13 17:39:16 +02:00

mt76x02_mmio.c

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c

2018-10-13 17:39:22 +02:00

mt76x02_phy.c

mt76: introduce mt76x02_init_agc_gain routine

2018-10-13 17:39:50 +02:00

mt76x02_phy.h

mt76: introduce mt76x02_init_agc_gain routine

2018-10-13 17:39:50 +02:00

mt76x02_regs.h

mt76x0: correct RF access via RF_CSR register.

2018-10-13 17:39:10 +02:00

mt76x02_trace.c

mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle

2018-10-05 20:05:46 +02:00

mt76x02_trace.h

mt76: move irq handler in mt76x02-lib moudle

2018-10-05 20:05:46 +02:00

mt76x02_txrx.c

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c

2018-10-13 17:39:23 +02:00

mt76x02_usb_core.c

mt76: reserve enough room for USB tx skbs

2018-10-13 17:39:31 +02:00

mt76x02_usb_mcu.c

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c

2018-10-13 17:39:20 +02:00

mt76x02_usb.h

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c

2018-10-13 17:39:22 +02:00

mt76x02_util.c

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c

2018-10-13 17:39:23 +02:00

mt76x02.h

mt76x0: phy: do not run calibration during channel switch

2018-10-13 17:39:53 +02:00

trace.c

…

trace.h

…

tx.c

mt76: do not store aggregation sequence number for null-data frames

2018-10-13 17:39:34 +02:00

usb_mcu.c

mt76: usb: move mt76x02 mcu code in mt76x02-usb module

2018-09-19 12:31:23 +02:00

usb_trace.c

mt76: add usb support to mt76 layer

2018-08-02 21:48:16 +03:00

usb_trace.h

mt76: add usb support to mt76 layer

2018-08-02 21:48:16 +03:00

usb.c

mt76: allow to identify bus

2018-10-13 17:39:11 +02:00

util.c

…

util.h

…