xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
538f4696bb75c7da4c7c88a7ce011b51c5fb260c
android_kernel_xiaomi_sm8450/drivers/net/wireless/ath/ath9k
History
Sujith Manoharan 6fcbe538be ath9k: Fix issue with MCS15 
On some boards which are based on AR9300, AR9580 or
AR9550, MCS15 usage is problematic.

This is because these boards use a "frequency doubler",
which doubles the refclk to get better EVM, but causes
spurs. Handle this properly in the driver to recover
throughput.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15 14:27:26 -05:00
..
ahb.c
wireless: ath9k: use dev_get_platdata()
2013-09-26 15:13:38 -04:00
ani.c
ath9k_hw: remove direct accesses to channel mode flags
2013-10-14 13:39:58 -04:00
ani.h
ath9k: Remove unused ANI commands
2013-08-28 13:58:27 -04:00
antenna.c
ath9k: Add support for AR9565 v1.0.1 LNA diversity
2013-09-26 15:13:28 -04:00
ar955x_1p0_initvals.h
ath9k_hw: Update initvals for QCA955x
2013-01-09 14:37:11 -05:00
ar5008_initvals.h
ath9k: fix column header comments for some initval arrays
2013-01-07 15:16:53 -05:00
ar5008_phy.c
ath9k_hw: remove references to hw->conf
2013-10-14 13:39:59 -04:00
ar9001_initvals.h
ath9k: fix column header comments for some initval arrays
2013-01-07 15:16:53 -05:00
ar9002_calib.c
ath9k_hw: remove IS_CHAN_B()
2013-10-14 13:39:58 -04:00
ar9002_hw.c
ath9k_hw: remove direct accesses to channel mode flags
2013-10-14 13:39:58 -04:00
ar9002_initvals.h
ath9k: Enable WoW only for AR9462
2013-06-03 15:55:46 -04:00
ar9002_mac.c
ath9k: Gather and report IRQ sync_cause errors.
2012-04-16 14:16:58 -04:00
ar9002_phy.c
ath9k: add TX99 support
2013-10-18 14:06:56 -04:00
ar9002_phy.h
ath9k: Program HW for WB195 diversity
2013-08-05 14:52:43 -04:00
ar9003_2p2_initvals.h
Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity"
2013-06-12 10:20:58 -04:00
ar9003_calib.c
ath9k: Fix PeakDetect calibration for AR9462
2013-09-26 15:13:47 -04:00
ar9003_eeprom.c
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
ar9003_eeprom.h
ath9k: Bypass EEPROM for diversity cap for AR9565
2013-09-26 15:13:27 -04:00
ar9003_hw.c
ath9k: Use correct PCIE initvals for AR9485
2013-11-11 14:47:45 -05:00
ar9003_mac.c
ath9k: Identify first subframe in an A-MPDU
2013-08-15 16:08:07 -04:00
ar9003_mac.h
…
ar9003_mci.c
ath9k: Use bitops for calibration flags
2013-09-26 15:13:47 -04:00
ar9003_mci.h
ath9k: Add new BT profile info A2DP_Voice
2012-10-29 15:19:30 -04:00
ar9003_paprd.c
ath9k_hw: fix PA predistortion miscalibration
2013-05-29 15:22:42 -04:00
ar9003_phy.c
ath9k: Fix issue with MCS15
2013-11-15 14:27:26 -05:00
ar9003_phy.h
ath9k: Fix issue with MCS15
2013-11-15 14:27:26 -05:00
ar9003_rtt.c
ath9k: Fix PeakDetect calibration for AR9462
2013-09-26 15:13:47 -04:00
ar9003_rtt.h
ath9k_hw: Fix RTT calibration
2012-05-15 17:27:55 -04:00
ar9330_1p1_initvals.h
ath9k: de-duplicate initvals
2012-06-28 14:37:47 -04:00
ar9330_1p2_initvals.h
ath9k: de-duplicate initvals
2012-06-28 14:37:47 -04:00
ar9340_initvals.h
ath9k_hw: add tx gain tables for newer devices
2013-01-11 14:50:00 -05:00
ar9462_2p0_initvals.h
ath9k: Add mix tx gain table for AR9462 2.0
2013-06-27 13:42:13 -04:00
ar9462_2p1_initvals.h
ath9k: Update AR9462 2.1 initvals
2013-11-15 14:27:26 -05:00
ar9485_initvals.h
ath9k: Use correct PCIE initvals for AR9485
2013-11-11 14:47:45 -05:00
ar9565_1p0_initvals.h
ath9k: Add and use initvals for channel 14
2013-09-26 15:13:30 -04:00
ar9580_1p0_initvals.h
ath9k_hw: change AR9580 initvals to fix a stability issue
2013-04-12 13:22:09 -04:00
ath9k.h
ath9k: Use correct PCIE initvals for AR9485
2013-11-11 14:47:45 -05:00
beacon.c
ath9k: Handle abnormal NAV in AP mode
2013-09-26 15:13:46 -04:00
btcoex.c
ath9k: stomp audio profiles on weak signal strength
2012-11-21 14:16:01 -05:00
btcoex.h
ath9k: stomp audio profiles on weak signal strength
2012-11-21 14:16:01 -05:00
calib.c
ath9k: add noise floor parameter to ath9k_hw_getchan_noise
2013-10-18 14:03:53 -04:00
calib.h
ath9k: add noise floor parameter to ath9k_hw_getchan_noise
2013-10-18 14:03:53 -04:00
common.c
ath9k: make ath9k_cmn_update_ichannel static
2013-10-14 13:39:59 -04:00
common.h
ath9k: make ath9k_cmn_update_ichannel static
2013-10-14 13:39:59 -04:00
debug.c
ath9k: add TX99 support
2013-10-18 14:06:56 -04:00
debug.h
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
dfs_debug.c
ath9k: dfs_debug fix possible NULL dereference
2013-11-11 14:42:43 -05:00
dfs_debug.h
ath9k: dfs move ath_dfs_pool_stats
2013-10-18 14:03:54 -04:00
dfs.c
ath9k: change DFS logging to use ath_dbg()
2013-04-22 15:17:40 -04:00
dfs.h
ath9k/ath: move dfs pattern detector to ath
2013-10-18 14:03:54 -04:00
eeprom_4k.c
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
eeprom_9287.c
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
eeprom_def.c
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
eeprom.c
ath9k: allow to load EEPROM content via firmware API
2012-12-10 15:49:57 -05:00
eeprom.h
ath9k: use 'struct ath_hw *' as the first argument for 'ath9k_hw_nvram_read'
2012-12-10 15:49:56 -05:00
gpio.c
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
hif_usb.c
ath9k_htc: do not use bulk on EP3 and EP4
2013-08-15 16:08:00 -04:00
hif_usb.h
wireless: ath9k-htc: only load firmware in need
2012-09-07 15:03:36 -04:00
htc_drv_beacon.c
ath9k_htc: Add support for mesh interfaces
2013-05-22 15:05:33 -04:00
htc_drv_debug.c
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
htc_drv_gpio.c
ath9k/ath9k_htc: Remove WME macros
2012-11-21 14:16:02 -05:00
htc_drv_init.c
ath9k_htc: do some initial hardware configuration
2013-07-22 16:04:07 -04:00
htc_drv_main.c
ath9k: make ath9k_cmn_update_ichannel static
2013-10-14 13:39:59 -04:00
htc_drv_txrx.c
ath9k_htc: Restore skb headroom when returning skb to mac80211
2013-08-22 14:21:03 -04:00
htc_hst.c
ath9k_htc: Fix memory leak
2013-01-11 14:12:01 -05:00
htc_hst.h
…
htc.h
ath9k_htc: Add ethtool stats support.
2013-06-24 14:44:23 -04:00
hw-ops.h
ath9k: add TX99 support
2013-10-18 14:06:56 -04:00
hw.c
ath9k: add noise floor parameter to ath9k_hw_getchan_noise
2013-10-18 14:03:53 -04:00
hw.h
ath9k: Use correct PCIE initvals for AR9485
2013-11-11 14:47:45 -05:00
init.c
ath9k: Use correct PCIE initvals for AR9485
2013-11-11 14:47:45 -05:00
Kconfig
ath9k: add TX99 support
2013-10-18 14:06:56 -04:00
link.c
ath9k: add TX99 support
2013-10-18 14:06:56 -04:00
mac.c
ath9k_hw: remove IS_CHAN_B()
2013-10-14 13:39:58 -04:00
mac.h
ath9k: remove sc->config.cabqReadyTime
2013-10-14 13:39:59 -04:00
main.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-11-04 14:45:14 -05:00
Makefile
ath9k/ath: move dfs pattern detector to ath
2013-10-18 14:03:54 -04:00
mci.c
ath9k_hw: remove direct accesses to channel mode flags
2013-10-14 13:39:58 -04:00
mci.h
ath9k: Add new BT profile info A2DP_Voice
2012-10-29 15:19:30 -04:00
pci.c
ath9k: Use correct PCIE initvals for AR9485
2013-11-11 14:47:45 -05:00
phy.h
ath9k: Fix diversity combining for AR9285
2013-07-24 11:02:39 -04:00
rc.c
ath9k: replace snprintf() with scnprintf()
2013-09-26 15:13:35 -04:00
rc.h
ath9k: Use minstrel rate control by default
2013-06-12 10:20:58 -04:00
recv.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-11-04 14:45:14 -05:00
reg.h
ath9k: Add support for AR9485 1.2
2013-08-22 14:30:29 -04:00
wmi.c
…
wmi.h
ath9k: mark wmi_event_swba as __packed
2013-09-26 15:13:48 -04:00
wow.c
ath9k: Enable WoW only for AR9462
2013-06-03 15:55:46 -04:00
xmit.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-11-04 14:45:14 -05:00