Mitch Williams 509a447ae8 i40evf: enable bus master after reset ...

If the VF is reset via VFLR, the device will be knocked out of bus
master mode, and the driver will fail to recover from the reset. Fix
this by enabling bus mastering after every reset. In a non-VFLR case,
the bus master bit will not be disabled, and this call will have no effect.

Change-ID: Id515859ac7a691db478222228add6d149e96801a
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

2016-02-16 19:14:56 -08:00

..

e1000

e1000: Elementary checkpatch warnings and checks removed

2015-12-12 23:13:52 -08:00

e1000e

e1000e: Fix msi-x interrupt automask

2015-12-14 20:19:47 -08:00

fm10k

fm10k: don't reinitialize RSS flow table when RXFH configured

2016-02-16 15:19:49 -05:00

i40e

i40e: add a little more to an NVM update debug message

2016-02-16 19:08:17 -08:00

i40evf

i40evf: enable bus master after reset

2016-02-16 19:14:56 -08:00

igb

igb: Add workaround for VLAN tag stripping on 82576

2016-02-15 16:52:33 -08:00

igbvf

igb/igbvf: don't give up

2016-02-15 16:17:57 -08:00

ixgb

drivers/net: get rid of unnecessary initializations in .get_drvinfo()

2015-10-16 00:24:10 -07:00

ixgbe

ixgbe: bulk free SKBs during TX completion cleanup cycle

2016-02-11 11:59:10 -05:00

ixgbevf

ixgbevf: minor cleanups for ixgbevf_set_itr()

2015-12-29 19:16:05 -08:00

e100.c

e100: Release skb when DMA mapping is failed in e100_xmit_prepare

2015-08-18 14:06:05 -07:00

Kconfig

i40e: Kernel dependency update for i40e to support geneve offload

2015-12-16 10:58:56 -05:00

Makefile

fm10k: Add skeletal frame for Intel(R) FM10000 Ethernet Switch Host Interface Driver

2014-09-23 03:59:13 -07:00