Files
android_kernel_xiaomi_sm8450/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
Laurent Pinchart 28120302c2 drm/omap: Don't call .check_timings() operation recursively
The .check_timings() operation is called recursively from the display
device back to the output device. Most components just forward the
operation to the previous component in the chain, resulting in lots of
duplicated pass-through functions. To avoid that, iterate over the
components manually.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-09-03 16:13:30 +03:00

187 lines
4.5 KiB
C

/*
* OPA362 analog video amplifier with output/power control
*
* Copyright (C) 2014 Golden Delicious Computers
* Author: H. Nikolaus Schaller <hns@goldelico.com>
*
* based on encoder-tfp410
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct gpio_desc *enable_gpio;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int opa362_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void opa362_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
omapdss_device_disconnect(dst, dst->next);
}
static int opa362_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
int r;
dev_dbg(dssdev->dev, "enable\n");
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
r = src->ops->enable(src);
if (r)
return r;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void opa362_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
dev_dbg(dssdev->dev, "disable\n");
if (!omapdss_device_is_enabled(dssdev))
return;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
src->ops->disable(src);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void opa362_set_timings(struct omap_dss_device *dssdev,
const struct videomode *vm)
{
struct omap_dss_device *src = dssdev->src;
dev_dbg(dssdev->dev, "set_timings\n");
src->ops->set_timings(src, vm);
}
static const struct omap_dss_device_ops opa362_ops = {
.connect = opa362_connect,
.disconnect = opa362_disconnect,
.enable = opa362_enable,
.disable = opa362_disable,
.set_timings = opa362_set_timings,
};
static int opa362_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
struct gpio_desc *gpio;
dev_dbg(&pdev->dev, "probe\n");
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
ddata->enable_gpio = gpio;
dssdev = &ddata->dssdev;
dssdev->ops = &opa362_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
dssdev->next = omapdss_of_find_connected_device(pdev->dev.of_node, 1);
if (IS_ERR(dssdev->next)) {
if (PTR_ERR(dssdev->next) != -EPROBE_DEFER)
dev_err(&pdev->dev, "failed to find video sink\n");
return PTR_ERR(dssdev->next);
}
omapdss_device_register(dssdev);
return 0;
}
static int __exit opa362_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
if (dssdev->next)
omapdss_device_put(dssdev->next);
omapdss_device_unregister(&ddata->dssdev);
WARN_ON(omapdss_device_is_enabled(dssdev));
if (omapdss_device_is_enabled(dssdev))
opa362_disable(dssdev);
WARN_ON(omapdss_device_is_connected(dssdev));
if (omapdss_device_is_connected(dssdev))
omapdss_device_disconnect(NULL, dssdev);
return 0;
}
static const struct of_device_id opa362_of_match[] = {
{ .compatible = "omapdss,ti,opa362", },
{},
};
MODULE_DEVICE_TABLE(of, opa362_of_match);
static struct platform_driver opa362_driver = {
.probe = opa362_probe,
.remove = __exit_p(opa362_remove),
.driver = {
.name = "amplifier-opa362",
.of_match_table = opa362_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(opa362_driver);
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control");
MODULE_LICENSE("GPL v2");