Files
android_kernel_xiaomi_sm8450/drivers/pci/host/pci-ftpci100.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

636 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Support for Faraday Technology FTPC100 PCI Controller
*
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
*
* Based on the out-of-tree OpenWRT patch for Cortina Gemini:
* Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
* Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
* Based on SL2312 PCI controller code
* Storlink (C) 2003
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/bitops.h>
#include <linux/irq.h>
#include <linux/clk.h>
/*
* Special configuration registers directly in the first few words
* in I/O space.
*/
#define PCI_IOSIZE 0x00
#define PCI_PROT 0x04 /* AHB protection */
#define PCI_CTRL 0x08 /* PCI control signal */
#define PCI_SOFTRST 0x10 /* Soft reset counter and response error enable */
#define PCI_CONFIG 0x28 /* PCI configuration command register */
#define PCI_DATA 0x2C
#define FARADAY_PCI_STATUS_CMD 0x04 /* Status and command */
#define FARADAY_PCI_PMC 0x40 /* Power management control */
#define FARADAY_PCI_PMCSR 0x44 /* Power management status */
#define FARADAY_PCI_CTRL1 0x48 /* Control register 1 */
#define FARADAY_PCI_CTRL2 0x4C /* Control register 2 */
#define FARADAY_PCI_MEM1_BASE_SIZE 0x50 /* Memory base and size #1 */
#define FARADAY_PCI_MEM2_BASE_SIZE 0x54 /* Memory base and size #2 */
#define FARADAY_PCI_MEM3_BASE_SIZE 0x58 /* Memory base and size #3 */
#define PCI_STATUS_66MHZ_CAPABLE BIT(21)
/* Bits 31..28 gives INTD..INTA status */
#define PCI_CTRL2_INTSTS_SHIFT 28
#define PCI_CTRL2_INTMASK_CMDERR BIT(27)
#define PCI_CTRL2_INTMASK_PARERR BIT(26)
/* Bits 25..22 masks INTD..INTA */
#define PCI_CTRL2_INTMASK_SHIFT 22
#define PCI_CTRL2_INTMASK_MABRT_RX BIT(21)
#define PCI_CTRL2_INTMASK_TABRT_RX BIT(20)
#define PCI_CTRL2_INTMASK_TABRT_TX BIT(19)
#define PCI_CTRL2_INTMASK_RETRY4 BIT(18)
#define PCI_CTRL2_INTMASK_SERR_RX BIT(17)
#define PCI_CTRL2_INTMASK_PERR_RX BIT(16)
/* Bit 15 reserved */
#define PCI_CTRL2_MSTPRI_REQ6 BIT(14)
#define PCI_CTRL2_MSTPRI_REQ5 BIT(13)
#define PCI_CTRL2_MSTPRI_REQ4 BIT(12)
#define PCI_CTRL2_MSTPRI_REQ3 BIT(11)
#define PCI_CTRL2_MSTPRI_REQ2 BIT(10)
#define PCI_CTRL2_MSTPRI_REQ1 BIT(9)
#define PCI_CTRL2_MSTPRI_REQ0 BIT(8)
/* Bits 7..4 reserved */
/* Bits 3..0 TRDYW */
/*
* Memory configs:
* Bit 31..20 defines the PCI side memory base
* Bit 19..16 (4 bits) defines the size per below
*/
#define FARADAY_PCI_MEMBASE_MASK 0xfff00000
#define FARADAY_PCI_MEMSIZE_1MB 0x0
#define FARADAY_PCI_MEMSIZE_2MB 0x1
#define FARADAY_PCI_MEMSIZE_4MB 0x2
#define FARADAY_PCI_MEMSIZE_8MB 0x3
#define FARADAY_PCI_MEMSIZE_16MB 0x4
#define FARADAY_PCI_MEMSIZE_32MB 0x5
#define FARADAY_PCI_MEMSIZE_64MB 0x6
#define FARADAY_PCI_MEMSIZE_128MB 0x7
#define FARADAY_PCI_MEMSIZE_256MB 0x8
#define FARADAY_PCI_MEMSIZE_512MB 0x9
#define FARADAY_PCI_MEMSIZE_1GB 0xa
#define FARADAY_PCI_MEMSIZE_2GB 0xb
#define FARADAY_PCI_MEMSIZE_SHIFT 16
/*
* The DMA base is set to 0x0 for all memory segments, it reflects the
* fact that the memory of the host system starts at 0x0.
*/
#define FARADAY_PCI_DMA_MEM1_BASE 0x00000000
#define FARADAY_PCI_DMA_MEM2_BASE 0x00000000
#define FARADAY_PCI_DMA_MEM3_BASE 0x00000000
/* Defines for PCI configuration command register */
#define PCI_CONF_ENABLE BIT(31)
#define PCI_CONF_WHERE(r) ((r) & 0xFC)
#define PCI_CONF_BUS(b) (((b) & 0xFF) << 16)
#define PCI_CONF_DEVICE(d) (((d) & 0x1F) << 11)
#define PCI_CONF_FUNCTION(f) (((f) & 0x07) << 8)
/**
* struct faraday_pci_variant - encodes IP block differences
* @cascaded_irq: this host has cascaded IRQs from an interrupt controller
* embedded in the host bridge.
*/
struct faraday_pci_variant {
bool cascaded_irq;
};
struct faraday_pci {
struct device *dev;
void __iomem *base;
struct irq_domain *irqdomain;
struct pci_bus *bus;
struct clk *bus_clk;
};
static int faraday_res_to_memcfg(resource_size_t mem_base,
resource_size_t mem_size, u32 *val)
{
u32 outval;
switch (mem_size) {
case SZ_1M:
outval = FARADAY_PCI_MEMSIZE_1MB;
break;
case SZ_2M:
outval = FARADAY_PCI_MEMSIZE_2MB;
break;
case SZ_4M:
outval = FARADAY_PCI_MEMSIZE_4MB;
break;
case SZ_8M:
outval = FARADAY_PCI_MEMSIZE_8MB;
break;
case SZ_16M:
outval = FARADAY_PCI_MEMSIZE_16MB;
break;
case SZ_32M:
outval = FARADAY_PCI_MEMSIZE_32MB;
break;
case SZ_64M:
outval = FARADAY_PCI_MEMSIZE_64MB;
break;
case SZ_128M:
outval = FARADAY_PCI_MEMSIZE_128MB;
break;
case SZ_256M:
outval = FARADAY_PCI_MEMSIZE_256MB;
break;
case SZ_512M:
outval = FARADAY_PCI_MEMSIZE_512MB;
break;
case SZ_1G:
outval = FARADAY_PCI_MEMSIZE_1GB;
break;
case SZ_2G:
outval = FARADAY_PCI_MEMSIZE_2GB;
break;
default:
return -EINVAL;
}
outval <<= FARADAY_PCI_MEMSIZE_SHIFT;
/* This is probably not good */
if (mem_base & ~(FARADAY_PCI_MEMBASE_MASK))
pr_warn("truncated PCI memory base\n");
/* Translate to bridge side address space */
outval |= (mem_base & FARADAY_PCI_MEMBASE_MASK);
pr_debug("Translated pci base @%pap, size %pap to config %08x\n",
&mem_base, &mem_size, outval);
*val = outval;
return 0;
}
static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
unsigned int fn, int config, int size,
u32 *value)
{
writel(PCI_CONF_BUS(bus_number) |
PCI_CONF_DEVICE(PCI_SLOT(fn)) |
PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
PCI_CONF_WHERE(config) |
PCI_CONF_ENABLE,
p->base + PCI_CONFIG);
*value = readl(p->base + PCI_DATA);
if (size == 1)
*value = (*value >> (8 * (config & 3))) & 0xFF;
else if (size == 2)
*value = (*value >> (8 * (config & 3))) & 0xFFFF;
return PCIBIOS_SUCCESSFUL;
}
static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
int config, int size, u32 *value)
{
struct faraday_pci *p = bus->sysdata;
dev_dbg(&bus->dev,
"[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
return faraday_raw_pci_read_config(p, bus->number, fn, config, size, value);
}
static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
unsigned int fn, int config, int size,
u32 value)
{
int ret = PCIBIOS_SUCCESSFUL;
writel(PCI_CONF_BUS(bus_number) |
PCI_CONF_DEVICE(PCI_SLOT(fn)) |
PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
PCI_CONF_WHERE(config) |
PCI_CONF_ENABLE,
p->base + PCI_CONFIG);
switch (size) {
case 4:
writel(value, p->base + PCI_DATA);
break;
case 2:
writew(value, p->base + PCI_DATA + (config & 3));
break;
case 1:
writeb(value, p->base + PCI_DATA + (config & 3));
break;
default:
ret = PCIBIOS_BAD_REGISTER_NUMBER;
}
return ret;
}
static int faraday_pci_write_config(struct pci_bus *bus, unsigned int fn,
int config, int size, u32 value)
{
struct faraday_pci *p = bus->sysdata;
dev_dbg(&bus->dev,
"[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
return faraday_raw_pci_write_config(p, bus->number, fn, config, size,
value);
}
static struct pci_ops faraday_pci_ops = {
.read = faraday_pci_read_config,
.write = faraday_pci_write_config,
};
static void faraday_pci_ack_irq(struct irq_data *d)
{
struct faraday_pci *p = irq_data_get_irq_chip_data(d);
unsigned int reg;
faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
}
static void faraday_pci_mask_irq(struct irq_data *d)
{
struct faraday_pci *p = irq_data_get_irq_chip_data(d);
unsigned int reg;
faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
| BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
}
static void faraday_pci_unmask_irq(struct irq_data *d)
{
struct faraday_pci *p = irq_data_get_irq_chip_data(d);
unsigned int reg;
faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
}
static void faraday_pci_irq_handler(struct irq_desc *desc)
{
struct faraday_pci *p = irq_desc_get_handler_data(desc);
struct irq_chip *irqchip = irq_desc_get_chip(desc);
unsigned int irq_stat, reg, i;
faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
chained_irq_enter(irqchip, desc);
for (i = 0; i < 4; i++) {
if ((irq_stat & BIT(i)) == 0)
continue;
generic_handle_irq(irq_find_mapping(p->irqdomain, i));
}
chained_irq_exit(irqchip, desc);
}
static struct irq_chip faraday_pci_irq_chip = {
.name = "PCI",
.irq_ack = faraday_pci_ack_irq,
.irq_mask = faraday_pci_mask_irq,
.irq_unmask = faraday_pci_unmask_irq,
};
static int faraday_pci_irq_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &faraday_pci_irq_chip, handle_level_irq);
irq_set_chip_data(irq, domain->host_data);
return 0;
}
static const struct irq_domain_ops faraday_pci_irqdomain_ops = {
.map = faraday_pci_irq_map,
};
static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p)
{
struct device_node *intc = of_get_next_child(p->dev->of_node, NULL);
int irq;
int i;
if (!intc) {
dev_err(p->dev, "missing child interrupt-controller node\n");
return -EINVAL;
}
/* All PCI IRQs cascade off this one */
irq = of_irq_get(intc, 0);
if (irq <= 0) {
dev_err(p->dev, "failed to get parent IRQ\n");
return irq ?: -EINVAL;
}
p->irqdomain = irq_domain_add_linear(intc, PCI_NUM_INTX,
&faraday_pci_irqdomain_ops, p);
if (!p->irqdomain) {
dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
return -EINVAL;
}
irq_set_chained_handler_and_data(irq, faraday_pci_irq_handler, p);
for (i = 0; i < 4; i++)
irq_create_mapping(p->irqdomain, i);
return 0;
}
static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
struct device_node *node)
{
const int na = 3, ns = 2;
int rlen;
parser->node = node;
parser->pna = of_n_addr_cells(node);
parser->np = parser->pna + na + ns;
parser->range = of_get_property(node, "dma-ranges", &rlen);
if (!parser->range)
return -ENOENT;
parser->end = parser->range + rlen / sizeof(__be32);
return 0;
}
static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p,
struct device_node *np)
{
struct of_pci_range range;
struct of_pci_range_parser parser;
struct device *dev = p->dev;
u32 confreg[3] = {
FARADAY_PCI_MEM1_BASE_SIZE,
FARADAY_PCI_MEM2_BASE_SIZE,
FARADAY_PCI_MEM3_BASE_SIZE,
};
int i = 0;
u32 val;
if (pci_dma_range_parser_init(&parser, np)) {
dev_err(dev, "missing dma-ranges property\n");
return -EINVAL;
}
/*
* Get the dma-ranges from the device tree
*/
for_each_of_pci_range(&parser, &range) {
u64 end = range.pci_addr + range.size - 1;
int ret;
ret = faraday_res_to_memcfg(range.pci_addr, range.size, &val);
if (ret) {
dev_err(dev,
"DMA range %d: illegal MEM resource size\n", i);
return -EINVAL;
}
dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
i + 1, range.pci_addr, end, val);
if (i <= 2) {
faraday_raw_pci_write_config(p, 0, 0, confreg[i],
4, val);
} else {
dev_err(dev, "ignore extraneous dma-range %d\n", i);
break;
}
i++;
}
return 0;
}
static int faraday_pci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct faraday_pci_variant *variant =
of_device_get_match_data(dev);
struct resource *regs;
resource_size_t io_base;
struct resource_entry *win;
struct faraday_pci *p;
struct resource *mem;
struct resource *io;
struct pci_host_bridge *host;
struct clk *clk;
unsigned char max_bus_speed = PCI_SPEED_33MHz;
unsigned char cur_bus_speed = PCI_SPEED_33MHz;
int ret;
u32 val;
LIST_HEAD(res);
host = devm_pci_alloc_host_bridge(dev, sizeof(*p));
if (!host)
return -ENOMEM;
host->dev.parent = dev;
host->ops = &faraday_pci_ops;
host->busnr = 0;
host->msi = NULL;
host->map_irq = of_irq_parse_and_map_pci;
host->swizzle_irq = pci_common_swizzle;
p = pci_host_bridge_priv(host);
host->sysdata = p;
p->dev = dev;
/* Retrieve and enable optional clocks */
clk = devm_clk_get(dev, "PCLK");
if (IS_ERR(clk))
return PTR_ERR(clk);
ret = clk_prepare_enable(clk);
if (ret) {
dev_err(dev, "could not prepare PCLK\n");
return ret;
}
p->bus_clk = devm_clk_get(dev, "PCICLK");
if (IS_ERR(p->bus_clk))
return PTR_ERR(clk);
ret = clk_prepare_enable(p->bus_clk);
if (ret) {
dev_err(dev, "could not prepare PCICLK\n");
return ret;
}
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
p->base = devm_ioremap_resource(dev, regs);
if (IS_ERR(p->base))
return PTR_ERR(p->base);
ret = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
&res, &io_base);
if (ret)
return ret;
ret = devm_request_pci_bus_resources(dev, &res);
if (ret)
return ret;
/* Get the I/O and memory ranges from DT */
resource_list_for_each_entry(win, &res) {
switch (resource_type(win->res)) {
case IORESOURCE_IO:
io = win->res;
io->name = "Gemini PCI I/O";
if (!faraday_res_to_memcfg(io->start - win->offset,
resource_size(io), &val)) {
/* setup I/O space size */
writel(val, p->base + PCI_IOSIZE);
} else {
dev_err(dev, "illegal IO mem size\n");
return -EINVAL;
}
ret = pci_remap_iospace(io, io_base);
if (ret) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
ret, io);
continue;
}
break;
case IORESOURCE_MEM:
mem = win->res;
mem->name = "Gemini PCI MEM";
break;
case IORESOURCE_BUS:
break;
default:
break;
}
}
/* Setup hostbridge */
val = readl(p->base + PCI_CTRL);
val |= PCI_COMMAND_IO;
val |= PCI_COMMAND_MEMORY;
val |= PCI_COMMAND_MASTER;
writel(val, p->base + PCI_CTRL);
/* Mask and clear all interrupts */
faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
if (variant->cascaded_irq) {
ret = faraday_pci_setup_cascaded_irq(p);
if (ret) {
dev_err(dev, "failed to setup cascaded IRQ\n");
return ret;
}
}
/* Check bus clock if we can gear up to 66 MHz */
if (!IS_ERR(p->bus_clk)) {
unsigned long rate;
u32 val;
faraday_raw_pci_read_config(p, 0, 0,
FARADAY_PCI_STATUS_CMD, 4, &val);
rate = clk_get_rate(p->bus_clk);
if ((rate == 33000000) && (val & PCI_STATUS_66MHZ_CAPABLE)) {
dev_info(dev, "33MHz bus is 66MHz capable\n");
max_bus_speed = PCI_SPEED_66MHz;
ret = clk_set_rate(p->bus_clk, 66000000);
if (ret)
dev_err(dev, "failed to set bus clock\n");
} else {
dev_info(dev, "33MHz only bus\n");
max_bus_speed = PCI_SPEED_33MHz;
}
/* Bumping the clock may fail so read back the rate */
rate = clk_get_rate(p->bus_clk);
if (rate == 33000000)
cur_bus_speed = PCI_SPEED_33MHz;
if (rate == 66000000)
cur_bus_speed = PCI_SPEED_66MHz;
}
ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);
if (ret)
return ret;
list_splice_init(&res, &host->windows);
ret = pci_scan_root_bus_bridge(host);
if (ret) {
dev_err(dev, "failed to scan host: %d\n", ret);
return ret;
}
p->bus = host->bus;
p->bus->max_bus_speed = max_bus_speed;
p->bus->cur_bus_speed = cur_bus_speed;
pci_bus_assign_resources(p->bus);
pci_bus_add_devices(p->bus);
pci_free_resource_list(&res);
return 0;
}
/*
* We encode bridge variants here, we have at least two so it doesn't
* hurt to have infrastructure to encompass future variants as well.
*/
const struct faraday_pci_variant faraday_regular = {
.cascaded_irq = true,
};
const struct faraday_pci_variant faraday_dual = {
.cascaded_irq = false,
};
static const struct of_device_id faraday_pci_of_match[] = {
{
.compatible = "faraday,ftpci100",
.data = &faraday_regular,
},
{
.compatible = "faraday,ftpci100-dual",
.data = &faraday_dual,
},
{},
};
static struct platform_driver faraday_pci_driver = {
.driver = {
.name = "ftpci100",
.of_match_table = of_match_ptr(faraday_pci_of_match),
.suppress_bind_attrs = true,
},
.probe = faraday_pci_probe,
};
builtin_platform_driver(faraday_pci_driver);