Thomas Huehn 3a245cbef6 ath5k: fix wrong max power per rate eeprom reads for 802.11a ...

This patch reduces the per rate target power eeprom reads for
AR5K_EEPROM_MODE_11A from 10 to 8, as there are only 8 valid
power curve entries on the eeprom. The former 10 reads lead to
equal max power limits per rate and this causes an increasing
distortion for all rates above 24 MBit and leads to a needless
poor performance in 802.11a mode.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

2012-08-21 14:58:20 -04:00

..

ahb.c

ath5k: add missing iounmap to AHB probe removal

2012-04-27 15:24:07 -04:00

ani.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

ani.h

ath5k: Cleanups v2 + add kerneldoc on all hw functions

2011-11-28 14:44:16 -05:00

ath5k.h

mac80211: remove hw.conf.channel usage where possible

2012-04-13 14:32:50 -04:00

attach.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

base.c

ath5k: fix spin_lock_irqsave/spin_lock_bh nesting in mesh

2012-08-13 15:17:25 -04:00

base.h

ath5k: remove last references to "softc"

2011-08-08 16:04:14 -04:00

caps.c

ath5k: MRR support and 2GHz radio override belong in ah_capabilities

2011-11-28 14:44:19 -05:00

debug.c

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

2012-04-12 13:49:28 -04:00

debug.h

treewide: use __printf not __attribute__((format(printf,...)))

2011-10-31 17:30:54 -07:00

desc.c

ath5k: Remove extraneous statements from ath5k_hw_proc_4word_tx_status and ath5k_hw_proc_2word_status.

2012-04-11 16:23:58 -04:00

desc.h

ath5k: Cleanups v2 + add kerneldoc on all hw functions

2011-11-28 14:44:16 -05:00

dma.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

eeprom.c

ath5k: fix wrong max power per rate eeprom reads for 802.11a

2012-08-21 14:58:20 -04:00

eeprom.h

ath5k: fix wrong max power per rate eeprom reads for 802.11a

2012-08-21 14:58:20 -04:00

gpio.c

ath5k: Cleanups v2 + add kerneldoc on all hw functions

2011-11-28 14:44:16 -05:00

initvals.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

Kconfig

ath5k: replace modparam_all_channels with CONFIG_ATH5K_TEST_CHANNELS

2012-07-11 15:40:23 -04:00

led.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

mac80211-ops.c

ath5k: fix spin_lock_irqsave/spin_lock_bh nesting in mesh

2012-08-13 15:17:25 -04:00

Makefile

ath5k: Move mac80211 functions into new file

2011-01-04 14:35:11 -05:00

pci.c

net/wireless: use module_pci_driver

2012-04-16 14:38:50 -04:00

pcu.c

mac80211: remove hw.conf.channel usage where possible

2012-04-13 14:32:50 -04:00

phy.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

qcu.c

mac80211: remove hw.conf.channel usage where possible

2012-04-13 14:32:50 -04:00

reg.h

ath5k: Switch from read-and-clear to write-to-clear method when handling PISR/SISR registers

2011-11-28 14:44:10 -05:00

reset.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

rfbuffer.h

ath5k: Cleanups v2 + add kerneldoc on all hw functions

2011-11-28 14:44:16 -05:00

rfgain.h

ath5k: Cleanups v2 + add kerneldoc on all hw functions

2011-11-28 14:44:16 -05:00

rfkill.c

ath5k: clean up base.h and its use

2011-08-08 16:04:14 -04:00

sysfs.c

ath: Add and use pr_fmt, convert printks to pr_<level>

2012-04-10 14:52:13 -04:00

trace.h

ath5k: avoid sparse warnings on tracing

2012-01-04 14:30:40 -05:00