Paul Walmsley 08e3d5f28d OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm ...

omap2_init_clk_clkdm() is called as part of the chip architecture-specific
initialization code, so calling it again from the struct clk init pointer
just wastes cycles.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

2009-09-03 20:14:00 +03:00

..

board-2430sdp.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-3430sdp.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-4430sdp.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-apollon.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-generic.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-h4.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-ldp.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-n8x0.c

OMAP2: add board file for Nokia N800 and N810

2009-08-28 10:51:38 -07:00

board-omap3beagle.c

OMAP3: beagle: add missing twl4030 usb platform_data

2009-08-28 11:24:15 -07:00

board-omap3evm.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-omap3pandora.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-overo.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-rx51-peripherals.c

OMAP3: RX51: Define TWL4030 USB transceiver in board file

2009-08-10 14:49:51 +03:00

board-rx51.c

OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle

2009-08-28 10:51:31 -07:00

board-zoom2.c

OMAP3: Zoom2: Add TWL4030 support

2009-08-28 11:24:13 -07:00

board-zoom-debugboard.c

OMAP2/3: Pass irqflags to 8250 driver

2009-08-28 11:24:08 -07:00

clock24xx.c

OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register

2009-07-24 20:10:36 -06:00

clock24xx.h

OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register

2009-07-24 20:10:36 -06:00

clock34xx.c

OMAP3 clock: Fixed processing of bootarg 'mpurate'

2009-09-03 20:13:58 +03:00

clock34xx.h

OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm

2009-09-03 20:14:00 +03:00

clock.c

OMAP2/3 clock: split, rename omap2_wait_clock_ready()

2009-07-24 20:10:35 -06:00

clock.h

OMAP2/3 clock: split, rename omap2_wait_clock_ready()

2009-07-24 20:10:35 -06:00

clockdomain.c

[ARM] omap: ensure that failing power domain lookups produce errors

2009-02-23 14:55:34 +00:00

clockdomains.h

OMAP3: PM: D2D clockdomain supports SW supervised transitions

2009-05-28 10:59:08 -07:00

cm-regbits-24xx.h

[ARM] OMAP2 PRCM: clean up CM_IDLEST bits

2009-02-08 17:50:37 +00:00

cm-regbits-34xx.h

OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init

2009-05-28 10:59:07 -07:00

cm.h

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

control.c

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

2008-08-07 09:55:48 +01:00

devices.c

OMAP3: MMC: Add mux for pins

2009-08-28 11:24:11 -07:00

gpmc-onenand.c

OMAP2/3: gpmc-onenand: correct use of async timings

2009-06-23 13:30:24 +03:00

gpmc-smc91x.c

ARM: OMAP2/3: Add generic smc91x support when connected to GPMC

2009-05-28 13:23:52 -07:00

gpmc.c

ARM: OMAP4: Add minimal support for omap4

2009-05-28 14:16:04 -07:00

id.c

OMAP2/3: Add omap_type() for determining GP/EMU/HS

2009-06-23 13:30:23 +03:00

io.c

OMAP3 SDRC: add support for 2 SDRAM chip selects

2009-07-24 19:43:25 -06:00

iommu2.c

OMAP: iommu: add initial debugfs support

2009-08-28 10:54:41 -07:00

irq.c

OMAP: Add new function to check wether there is irq pending

2009-05-28 10:59:04 -07:00

Kconfig

OMAP2: add board file for Nokia N800 and N810

2009-08-28 10:51:38 -07:00

mailbox.c

OMAP2/3: omap mailbox: platform_get_irq() error ignored

2009-06-23 13:30:22 +03:00

Makefile

OMAP2: add board file for Nokia N800 and N810

2009-08-28 10:51:38 -07:00

Makefile.boot

[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

2005-11-10 14:26:51 +00:00

mcbsp.c

ARM: includecheck fix: mach-omap2/mcbsp.c

2009-07-25 17:08:23 +01:00

mmc-twl4030.c

OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up

2009-08-10 14:49:51 +03:00

mmc-twl4030.h

ARM: OMAP3: mmc-twl4030 uses regulator framework

2009-05-28 14:04:03 -07:00

mux.c

OMAP3: MMC: Add mux for pins

2009-08-28 11:24:11 -07:00

omap3-iommu.c

omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration

2009-05-22 10:17:02 +03:00

omap-headsmp.S

ARM: OMAP4: SMP: Add OMAP4430 SMP board files

2009-06-09 13:03:50 +05:30

omap-smp.c

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

pm24xx.c

OMAP2/3: PM: make PM __init calls static

2009-08-05 09:10:50 -07:00

pm34xx.c

OMAP3: PM: Fix wrong sequence in suspend.

2009-08-05 09:10:54 -07:00

pm-debug.c

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

pm.h

OMAP2/3: PM: make PM __init calls static

2009-08-05 09:10:50 -07:00

powerdomain.c

OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.

2009-09-03 20:13:53 +03:00

powerdomains24xx.h

ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains

2008-08-19 11:08:42 +03:00

powerdomains34xx.h

[ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond

2009-02-23 14:52:51 +00:00

powerdomains.h

[ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond

2009-02-23 14:52:51 +00:00

prcm-common.h

OMAP2/3: PM: push core PM code from linux-omap

2009-05-28 10:58:50 -07:00

prcm.c

OMAP2/3 clock: split, rename omap2_wait_clock_ready()

2009-07-24 20:10:35 -06:00

prm-regbits-24xx.h

ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains

2008-08-19 11:08:42 +03:00

prm-regbits-34xx.h

ARM: OMAP3: Fix HW SAVEANDRESTORE shift define

2009-05-16 08:28:17 -07:00

prm.h

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

sdram-micron-mt46h32m32lf-6.h

ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2

2009-05-28 14:03:59 -07:00

sdram-qimonda-hyb18m512160af-6.h

ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6

2009-05-28 14:03:59 -07:00

sdrc2xxx.c

ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE

2009-05-25 11:26:42 -07:00

sdrc.c

OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot

2009-07-24 19:44:01 -06:00

sdrc.h

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

serial.c

OMAP2/3: Pass irqflags to 8250 driver

2009-08-28 11:24:08 -07:00

sleep24xx.S

OMAP2/3: PM: push core PM code from linux-omap

2009-05-28 10:58:50 -07:00

sleep34xx.S

OMAP2/3: PM: push core PM code from linux-omap

2009-05-28 10:58:50 -07:00

sram34xx.S

OMAP3 SDRC: Move the clk stabilization delay to the right place

2009-07-24 20:10:35 -06:00

sram242x.S

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

sram243x.S

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

timer-gp.c

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

timer-mpu.c

ARM: OMAP4: SMP: Add mpu timer support for OMAP4430

2009-06-09 13:03:59 +05:30

usb-musb.c

USB: musb: fix the nop registration for OMAP3EVM

2009-08-07 16:05:13 -07:00

usb-tusb6010.c

ARM: OMAP2: Fix tusb6010 init error and compilation warning

2009-05-12 11:20:02 -07:00