The IProc host controller has I/O memory windows allocated in
the AXI memory map that can be used to address PCI I/O memory
space.
Mapping from AXI memory windows to PCI outbound memory windows is
carried out in the host controller through OARR/OMAP registers pairs
that permit to define power of two region size AXI<->PCI mappings, the
smallest of which is 128MB.
Current code enables AXI memory window to PCI outbound memory window
mapping only for AXI windows matching one of the OARR/OMAP window sizes,
that are SoC dependent and the smallest of which is 128MB.
Some SoCs implementing the IProc host controller have a 32-bit AXI
memory window into PCI I/O memory space, eg:
Base address | Size
-----------------------------
(1) 0x42000000 | 0x2000000
(2) 0x400000000 | 0x80000000
but its size (32MB - (1) above) is smaller than the smallest AXI<->PCI
region size provided by OARR (128MB), so the current driver rejects
mappings for the 32-bit region making the IProc host controller driver
unusable on 32-bit systems.
However, there is no reason why the 32-bit I/O memory window cannot be
enabled by mapping it through an OARR/OMAP region bigger in size (ie
32-bit AXI window size is 32MB but can be mapped using a 128MB OARR/OMAP
region).
Allow outbound window configuration of I/O memory windows that
are smaller in size than the host controller OARR/OMAP region, so
that the 32-bit AXI memory window can actually be enabled,
making the IProc host controller operational on 32-bit systems.
Link: https://lore.kernel.org/linux-pci/1551415936-30174-3-git-send-email-srinath.mannam@broadcom.com/
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
The IPROC PCIe host controller implementation returns CFG_RETRY_STATUS
(0xffff0001) data when it receives a CRS completion, regardless of the
address of the read or the CRS Software Visibility Enable bit. As a
workaround the driver retries in software any read that returns
CFG_RETRY_STATUS even though, for reads of registers that are not Vendor
ID, the register value can correspond to CFG_RETRY_STATUS; this
situation would cause a timeout and failure of reading a valid register
value.
IPROC PCIe host controller PAXB v2 has a register to show config read
status flags like SC, UR, CRS and CA. Using this status flag,
an extra check is added to confirm the CRS using status flags before
reissuing a config read, fixing the issue.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Fix previous incorrect logic that limits PAXC slot number to zero only.
In order for SRIOV/VF to work, we need to allow the slot number to be
greater than zero.
Fixes: 46560388c4 ("PCI: iproc: Allow multiple devices except on PAXC")
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
PAXC is an emulated PCIe root complex internally in various Broadcom
based SoCs. PAXC internally connects to the embedded network processor
within these SoCs, with the embedeed network processor exposed as an
endpoint device.
The number of physical functions from the embedded network processor
that can be accessed depends on the firmware configuration.
Unfortunately, due to an ASIC bug, unconfigured physical functions cannot
be properly hidden from the root complex during enumerattion. As a
result, config write access to these unconfigured physical functions
during enumeration will cause a bus lock up on the embedded network
processor.
Fortunately, these unconfigured physical functions contain a very
specific, staled PCIe device ID 0x168e. By making use of this device ID,
one is able to terminate the enumeration early in the vendor/device ID
config read.
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
The internal MSI parsing logic in certain revisions of PAXC root
complexes does not work properly and can cause corruptions on the
writes transactions so they need to be disabled.
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
On certain versions of Broadcom PAXC based root complexes, certain
regions of the configuration space are corrupted. As a result, it
prevents the Linux PCIe stack from traversing the linked list of the
capability registers completely and therefore the root complex is
not advertised as "PCIe capable". This prevents the correct PCIe RID
from being parsed in the kernel PCIe stack. A correct RID is required
for mapping to a stream ID from the SMMU or the device ID from the
GICv3 ITS.
This patch fixes up the issue by manually populating the related
PCIe capabilities.
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
Native PCI drivers for root complex devices were originally all in
drivers/pci/host/. Some of these devices can also be operated in endpoint
mode. Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.
These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.
No functional change intended.
Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
