commit d3f450533bbcb6dd4d7d59cadc9b61b7321e4ac1 upstream.
Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.
Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.
However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.
Cc: <stable@vger.kernel.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1782
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 196dff2712ca5a2e651977bb2fe6b05474111a83 upstream.
Instead of blindly creating the EFI random seed configuration table if
the RNG protocol is implemented and works, check whether such a EFI
configuration table was provided by an earlier boot stage and if so,
concatenate the existing and the new seeds, leaving it up to the core
code to mix it in and credit it the way it sees fit.
This can be used for, e.g., systemd-boot, to pass an additional seed to
Linux in a way that can be consumed by the kernel very early. In that
case, the following definitions should be used to pass the seed to the
EFI stub:
struct linux_efi_random_seed {
u32 size; // of the 'seed' array in bytes
u8 seed[];
};
The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY
pool memory, and the address of the struct in memory should be installed
as a EFI configuration table using the following GUID:
LINUX_EFI_RANDOM_SEED_TABLE_GUID 1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b
Note that doing so is safe even on kernels that were built without this
patch applied, but the seed will simply be overwritten with a seed
derived from the EFI RNG protocol, if available. The recommended seed
size is 32 bytes, and seeds larger than 512 bytes are considered
corrupted and ignored entirely.
In order to preserve forward secrecy, seeds from previous bootloaders
are memzero'd out, and in order to preserve memory, those older seeds
are also freed from memory. Freeing from memory without first memzeroing
is not safe to do, as it's possible that nothing else will ever
overwrite those pages used by EFI.
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: incorporate Jason's followup changes to extend the maximum seed
size on the consumer end, memzero() it and drop a needless printk]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5e29dc36bd5e2166b834ceb19990d9e68a734d7d ]
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.
Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab1ddef98a715eddb65309ffa83267e4e84a571e ]
Ceph has a need to know whether a particular inode has any locks set on
it. It's currently tracking that by a num_locks field in its
filp->private_data, but that's problematic as it tries to decrement this
field when releasing locks and that can race with the file being torn
down.
Add a new vfs_inode_has_locks helper that just returns whether any locks
are currently held on the inode.
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 461ab10ef7e6 ("ceph: switch to vfs_inode_has_locks() to fix file lock bug")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b18cba09e374637a0a3759d856a6bca94c133952 ]
Commit 9130b8dbc6 ("SUNRPC: allow for upcalls for the same uid
but different gss service") introduced `auth` argument to
__gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL
since it (and auth->service) was not (yet) determined.
When multiple upcalls with the same uid and different service are
ongoing, it could happen that __gss_find_upcall(), which returns the
first match found in the pipe->in_downcall list, could not find the
correct gss_msg corresponding to the downcall we are looking for.
Moreover, it might return a msg which is not sent to rpc.gssd yet.
We could see mount.nfs process hung in D state with multiple mount.nfs
are executed in parallel. The call trace below is of CentOS 7.9
kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/
elrepo kernel-ml-6.0.7-1.el7.
PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs"
#0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f
#1 [ffff9203ca323580] schedule at ffffffffa3b88eb9
#2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss]
#3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc
[sunrpc]
#4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss]
#5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc]
#6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc]
#7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc]
#8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc]
#9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc]
The scenario is like this. Let's say there are two upcalls for
services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe.
When rpc.gssd reads pipe to get the upcall msg corresponding to
service B from pipe->pipe and then writes the response, in
gss_pipe_downcall the msg corresponding to service A will be picked
because only uid is used to find the msg and it is before the one for
B in pipe->in_downcall. And the process waiting for the msg
corresponding to service A will be woken up.
Actual scheduing of that process might be after rpc.gssd processes the
next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A).
The process is scheduled to see gss_msg->ctx == NULL and
gss_msg->msg.errno == 0, therefore it cannot break the loop in
gss_create_upcall and is never woken up after that.
This patch adds a simple check to ensure that a msg which is not
sent to rpc.gssd yet is not chosen as the matching upcall upon
receiving a downcall.
Signed-off-by: minoura makoto <minoura@valinux.co.jp>
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@nec.com>
Tested-by: Hiroshi Shimamoto <h-shimamoto@nec.com>
Cc: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9130b8dbc6 ("SUNRPC: allow for upcalls for same uid but different gss service")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a44e84a9b7764c72896f7241a0ec9ac7e7ef38dd ]
When manipulating xattr blocks, we can deadlock infinitely looping
inside ext4_xattr_block_set() where we constantly keep finding xattr
block for reuse in mbcache but we are unable to reuse it because its
reference count is too big. This happens because cache entry for the
xattr block is marked as reusable (e_reusable set) although its
reference count is too big. When this inconsistency happens, this
inconsistent state is kept indefinitely and so ext4_xattr_block_set()
keeps retrying indefinitely.
The inconsistent state is caused by non-atomic update of e_reusable bit.
e_reusable is part of a bitfield and e_reusable update can race with
update of e_referenced bit in the same bitfield resulting in loss of one
of the updates. Fix the problem by using atomic bitops instead.
This bug has been around for many years, but it became *much* easier
to hit after commit 65f8b80053a1 ("ext4: fix race when reusing xattr
blocks").
Cc: stable@vger.kernel.org
Fixes: 6048c64b26 ("mbcache: add reusable flag to cache entries")
Fixes: 65f8b80053a1 ("ext4: fix race when reusing xattr blocks")
Reported-and-tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: Thilo Fromm <t-lo@linux.microsoft.com>
Link: https://lore.kernel.org/r/c77bf00f-4618-7149-56f1-b8d1664b9d07@linux.microsoft.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20221123193950.16758-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 307af6c879377c1c63e71cbdd978201f9c7ee8df ]
Use the fact that entries with elevated refcount are not removed from
the hash and just move removal of the entry from the hash to the entry
freeing time. When doing this we also change the generic code to hold
one reference to the cache entry, not two of them, which makes code
somewhat more obvious.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dc96bba65f53daa217f0a8f43edad145286a8f5 ]
Add function mb_cache_entry_delete_or_get() to delete mbcache entry if
it is unused and also add a function to wait for entry to become unused
- mb_cache_entry_wait_unused(). We do not share code between the two
deleting function as one of them will go away soon.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb90d4bc7b6a536b2e4db45f4763e467c2008251 ]
Working through a conversion to a call kmap_local_page() instead of
kmap() revealed many places where the pattern kmap/memcpy/kunmap
occurred.
Eric Biggers, Matthew Wilcox, Christoph Hellwig, Dan Williams, and Al
Viro all suggested putting this code into helper functions. Al Viro
further pointed out that these functions already existed in the iov_iter
code.[1]
Various locations for the lifted functions were considered.
Headers like mm.h or string.h seem ok but don't really portray the
functionality well. pagemap.h made some sense but is for page cache
functionality.[2]
Another alternative would be to create a new header for the promoted
memcpy functions, but it masks the fact that these are designed to copy
to/from pages using the kernel direct mappings and complicates matters
with a new header.
Placing these functions in 'highmem.h' is suboptimal especially with the
changes being proposed in the functionality of kmap. From a caller
perspective including/using 'highmem.h' implies that the functions
defined in that header are only required when highmem is in use which is
increasingly not the case with modern processors. However, highmem.h is
where all the current functions like this reside (zero_user(),
clear_highpage(), clear_user_highpage(), copy_user_highpage(), and
copy_highpage()). So it makes the most sense even though it is
distasteful for some.[3]
Lift memcpy_to_page() and memcpy_from_page() to pagemap.h.
[1] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/https://lore.kernel.org/lkml/20201013112544.GA5249@infradead.org/
[2] https://lore.kernel.org/lkml/20201208122316.GH7338@casper.infradead.org/
[3] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/#thttps://lore.kernel.org/lkml/20201208163814.GN1563847@iweiny-DESK2.sc.intel.com/
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Or Gerlitz <gerlitz.or@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 956510c0c743 ("fs: ext4: initialize fsdata in pagecache_write()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5fdded8448924e3631d466eea499b11606c43640 upstream.
The member void *data in the structure devfreq can be overwrite
by governor_userspace. For example:
1. The device driver assigned the devfreq governor to simple_ondemand
by the function devfreq_add_device() and init the devfreq member
void *data to a pointer of a static structure devfreq_simple_ondemand_data
by the function devfreq_add_device().
2. The user changed the devfreq governor to userspace by the command
"echo userspace > /sys/class/devfreq/.../governor".
3. The governor userspace alloced a dynamic memory for the struct
userspace_data and assigend the member void *data of devfreq to
this memory by the function userspace_init().
4. The user changed the devfreq governor back to simple_ondemand
by the command "echo simple_ondemand > /sys/class/devfreq/.../governor".
5. The governor userspace exited and assigned the member void *data
in the structure devfreq to NULL by the function userspace_exit().
6. The governor simple_ondemand fetched the static information of
devfreq_simple_ondemand_data in the function
devfreq_simple_ondemand_func() but the member void *data of devfreq was
assigned to NULL by the function userspace_exit().
7. The information of upthreshold and downdifferential is lost
and the governor simple_ondemand can't work correctly.
The member void *data in the structure devfreq is designed for
a static pointer used in a governor and inited by the function
devfreq_add_device(). This patch add an element named governor_data
in the devfreq structure which can be used by a governor(E.g userspace)
who want to assign a private data to do some private things.
Fixes: ce26c5bb95 ("PM / devfreq: Add basic governors")
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c1c5097781f563b70a81683ea6fdac21637573b ]
Long standing KCSAN issues are caused by data-race around
some dev->stats changes.
Most performance critical paths already use per-cpu
variables, or per-queue ones.
It is reasonable (and more correct) to use atomic operations
for the slow paths.
This patch adds an union for each field of net_device_stats,
so that we can convert paths that are not yet protected
by a spinlock or a mutex.
netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64
Note that the memcpy() we were using on 64bit arches
had no provision to avoid load-tearing,
while atomic_long_read() is providing the needed protection
at no cost.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d044ca035dc22df0d3b39e56f2881071d9118bd ]
The Hyper-V framebuffer code registers a panic notifier in order
to try updating its fbdev if the kernel crashed. The notifier
callback is straightforward, but it calls the vmbus_sendpacket()
routine eventually, and such function takes a spinlock for the
ring buffer operations.
Panic path runs in atomic context, with local interrupts and
preemption disabled, and all secondary CPUs shutdown. That said,
taking a spinlock might cause a lockup if a secondary CPU was
disabled with such lock taken. Fix it here by checking if the
ring buffer spinlock is busy on Hyper-V framebuffer panic notifier;
if so, bail-out avoiding the potential lockup scenario.
Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Tested-by: Fabio A M Martins <fabiomirmar@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa82117010430aff2ce86400f7328f55a31b48a6 ]
This patch is to define a inline function skb_csum_is_sctp(), and
also replace all places where it checks if it's a SCTP CSUM skb.
This function would be used later in many networking drivers in
the following patches.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa69ee5aa48b5b52e8028c2eb486906e9998d081 ]
It turns out that usage of skb extensions can cause memory leaks. Ido
Schimmel reported: "[...] there are instances that blindly overwrite
'skb->extensions' by invoking skb_copy_header() after __alloc_skb()."
Therefore, give up on using skb extensions for KCOV handle, and instead
directly store kcov_handle in sk_buff.
Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions")
Fixes: 85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET")
Fixes: 97f53a08cba1 ("net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling")
Link: https://lore.kernel.org/linux-wireless/20201121160941.GA485907@shredder.lan/
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20201125224840.2014773-1-elver@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99c05e4283a19a02a256f14100ca4ec3b2da3f62 ]
Add '__adis_enable_irq()' implementation which is the unlocked
version of 'adis_enable_irq()'.
Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from
'__adis_intial_startup()' to keep the expected unlocked functionality.
This fix is needed to remove a deadlock for all devices which are
using 'adis_initial_startup()'. The deadlock occurs because the
same mutex is acquired twice, without releasing it.
The mutex is acquired once inside 'adis_initial_startup()', before
calling '__adis_initial_startup()', and once inside
'adis_enable_irq()', which is called by '__adis_initial_startup()'.
The deadlock is removed by calling '__adis_enable_irq()', instead of
'adis_enable_irq()' from within '__adis_initial_startup()'.
Fixes: b600bd7eb3335 ("iio: adis: do not disabe IRQs in 'adis_init()'")
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31fa357ac809affd9f9a7d0b5d1991951e16beec ]
Some devices can't mask/unmask the data ready pin and in those cases
each driver was just calling '{dis}enable_irq()' to control the trigger
state. This change, moves that handling into the library by introducing
a new boolean in the data structure that tells the library that the
device cannot unmask the pin.
On top of controlling the trigger state, we can also use this flag to
automatically request the IRQ with 'IRQF_NO_AUTOEN' in case it is set.
So far, all users of the library want to start operation with IRQs/DRDY
pin disabled so it should be fairly safe to do this inside the library.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210903141423.517028-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe16f35bee6880becca6f20d2ebf6b457148552 ]
Many drivers don't want interrupts enabled automatically via request_irq().
So they are handling this issue by either way of the below two:
(1)
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
(2)
request_irq(dev, irq...);
disable_irq(irq);
The code in the second way is silly and unsafe. In the small time gap
between request_irq() and disable_irq(), interrupts can still come.
The code in the first way is safe though it's subobtimal.
Add a new IRQF_NO_AUTOEN flag which can be handed in by drivers to
request_irq() and request_nmi(). It prevents the automatic enabling of the
requested interrupt/nmi in the same safe way as #1 above. With that the
various usage sites of #1 and #2 above can be simplified and corrected.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20210302224916.13980-2-song.bao.hua@hisilicon.com
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f117484329b233455ee278f2d9b0a4356835060 ]
When `timerqueue_getnext()` is called on an empty timer queue, it will
use `rb_entry()` on a NULL pointer, which is invalid. Fix that by using
`rb_entry_safe()` which handles NULL pointers.
This has not caused any issues so far because the offset of the `rb_node`
member in `timerqueue_node` is 0, so `rb_entry()` is essentially a no-op.
Fixes: 511885d706 ("lib/timerqueue: Rely on rbtree semantics for next timer")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221114195421.342929-1-pobrn@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99139b80c1b3d73026ed8be2de42c52e2976ab64 ]
APR and other packet routers like GPR are pretty much same and
interact with other drivers in similar way.
Ex: GPR ports can be considered as APR services, only difference
is they are allocated dynamically.
Other difference is packet layout, which should not matter
with the apis abstracted. Apart from this the rest of the
functionality is pretty much identical across APR and GPR.
Make the apr code more reusable by abstracting it service level,
rather than device level so that we do not need to write
new drivers for other new packet routers like GPR.
This patch is in preparation to add GPR support to this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-4-srinivas.kandagatla@linaro.org
Stable-dep-of: 6d7860f5750d ("soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03e02acda8e267a8183e1e0ed289ff1ef9cd7ed8 ]
This is identical to eventfd_signal(), but it allows the caller to pass
in a mask to be used for the poll wakeup key. The use case is avoiding
repeated multishot triggers if we have a dependency between eventfd and
io_uring.
If we setup an eventfd context and register that as the io_uring eventfd,
and at the same time queue a multishot poll request for the eventfd
context, then any CQE posted will repeatedly trigger the multishot request
until it terminates when the CQ ring overflows.
In preparation for io_uring detecting this circular dependency, add the
mentioned helper so that io_uring can pass in EPOLL_URING as part of the
poll wakeup key.
Cc: stable@vger.kernel.org # 6.0
[axboe: fold in !CONFIG_EVENTFD fix from Zhang Qilong]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e54937963fa249595824439dc839c948188dea83 ]
No need to restrict these anymore, as the worker threads are direct
clones of the original task. Hence we know for a fact that we can
support anything that the regular task can.
Since the only user of proto_ops->flags was to flag PROTO_CMSG_DATA_ONLY,
kill the member and the flag definition too.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No upstream commit exists.
This imports the io_uring codebase from 5.15.85, wholesale. Changes
from that code base:
- Drop IOCB_ALLOC_CACHE, we don't have that in 5.10.
- Drop MKDIRAT/SYMLINKAT/LINKAT. Would require further VFS backports,
and we don't support these in 5.10 to begin with.
- sock_from_file() old style calling convention.
- Use compat_get_bitmap() only for CONFIG_COMPAT=y
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7aab1a7c52b82d9afd7e03c398eb03dc2aa0507 ]
The only exported helper we have right now is task_work_cancel(), which
cancels any task_work from a given task where func matches the queued
work item. This is a bit too coarse for some use cases. Add a
task_work_cancel_match() that allows to more specifically target
individual work items outside of purely the callback function used.
task_work_cancel() can be trivially implemented on top of that, hence do
so.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e296dc4996b8094ccde45d19090d804c4103513e ]
It's available everywhere now, no need to check or add dummy defines.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 12db8b690010ccfadf9d0b49a1e1798e47dbbe1a ]
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set,
will return true if signal_pending() is used in a wait loop. That causes an
exit of the loop so that notify_signal tracehooks can be run. If the wait
loop is currently inside a system call, the system call is restarted once
task_work has been processed.
In preparation for only having arch_do_signal() handle syscall restarts if
_TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart(). Pass
in a boolean that tells the architecture specific signal handler if it
should attempt to get a signal, or just process a potential syscall
restart.
For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to
get_signal(). This is done to minimize the needed architecture changes to
support this feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9fe83c43e71cdb8e5b9520bcb98706a2b3c680c8 ]
The function close_fd_get_file is explicitly a variant of
__close_fd[1]. Now that __close_fd has been renamed close_fd, rename
close_fd_get_file to be consistent with close_fd.
When __alloc_fd, __close_fd and __fd_install were introduced the
double underscore indicated that the function took a struct
files_struct parameter. The function __close_fd_get_file never has so
the naming has always been inconsistent. This just cleans things up
so there are not any lingering mentions or references __close_fd left
in the code.
[1] 80cd795630 ("binder: fix use-after-free due to ksys_close() during fdget()")
Link: https://lkml.kernel.org/r/20201120231441.29911-23-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5c251e9dc0e127bac6fc5b8e6696363d2e35f515 ]
This is in preparation for maintaining signal_pending() as the decider of
whether or not a schedule() loop should be broken, or continue sleeping.
This is different than the core signal use cases, which really need to know
whether an actual signal is pending or not. task_sigpending() returns
non-zero if TIF_SIGPENDING is set.
Only core kernel use cases should care about the distinction between
the two, make sure those use the task_sigpending() helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-2-axboe@kernel.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 99668f618062816ca7ba639b007eb145b9d3d41e ]
Now that we support non-blocking path resolution internally, expose it
via openat2() in the struct open_how ->resolve flags. This allows
applications using openat2() to limit path resolution to the extent that
it is already cached.
If the lookup cannot be satisfied in a non-blocking manner, openat2(2)
will return -1/-EAGAIN.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c6ec2b0a3e0381d886d531bd1471dfdb1509237 ]
io_uring always punts opens to async context, since there's no control
over whether the lookup blocks or not. Add LOOKUP_CACHED to support
just doing the fast RCU based lookups, which we know will not block. If
we can do a cached path resolution of the filename, then we don't have
to always punt lookups for a worker.
During path resolution, we always do LOOKUP_RCU first. If that fails and
we terminate LOOKUP_RCU, then fail a LOOKUP_CACHED attempt as well.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fb0f47a9d7acf620d0fd97831b69da9bc5e22ed ]
In an ideal world, when someone is passed an iov_iter and returns X bytes,
then X bytes would have been consumed/advanced from the iov_iter. But we
have use cases that always consume the entire iterator, a few examples
of that are iomap and bdev O_DIRECT. This means we cannot rely on the
state of the iov_iter once we've called ->read_iter() or ->write_iter().
This would be easier if we didn't always have to deal with truncate of
the iov_iter, as rewinding would be trivial without that. We recently
added a commit to track the truncate state, but that grew the iov_iter
by 8 bytes and wasn't the best solution.
Implement a helper to save enough of the iov_iter state to sanely restore
it after we've called the read/write iterator helpers. This currently
only works for IOVEC/BVEC/KVEC as that's all we need, support for other
iterator types are left as an exercise for the reader.
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wiacKV4Gh-MYjteU0LwNBSGpWrK-Ov25HdqB1ewinrFPg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc440e8738e5c875297ac0e90316745093be7e28 ]
Provide a generic helper for setting up an io_uring worker. Returns a
task_struct so that the caller can do whatever setup is needed, then call
wake_up_new_task() to kick it into gear.
Add a kernel_clone_args member, io_thread, which tells copy_process() to
mark the task with PF_IO_WORKER.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10bc8e4af65946b727728d7479c028742321b60a upstream.
[backport comments for pre v5.15:
- ksmbd mentions are irrelevant - ksmbd hunks were dropped
- sb_write_started() is missing - assert was dropped
]
Commit 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fac35ba763ed07ba93154c95ffc0c4a55023707f upstream.
On some architectures (like ARM64), it can support CONT-PTE/PMD size
hugetlb, which means it can support not only PMD/PUD size hugetlb (2M and
1G), but also CONT-PTE/PMD size(64K and 32M) if a 4K page size specified.
So when looking up a CONT-PTE size hugetlb page by follow_page(), it will
use pte_offset_map_lock() to get the pte entry lock for the CONT-PTE size
hugetlb in follow_page_pte(). However this pte entry lock is incorrect
for the CONT-PTE size hugetlb, since we should use huge_pte_lock() to get
the correct lock, which is mm->page_table_lock.
That means the pte entry of the CONT-PTE size hugetlb under current pte
lock is unstable in follow_page_pte(), we can continue to migrate or
poison the pte entry of the CONT-PTE size hugetlb, which can cause some
potential race issues, even though they are under the 'pte lock'.
For example, suppose thread A is trying to look up a CONT-PTE size hugetlb
page by move_pages() syscall under the lock, however antoher thread B can
migrate the CONT-PTE hugetlb page at the same time, which will cause
thread A to get an incorrect page, if thread A also wants to do page
migration, then data inconsistency error occurs.
Moreover we have the same issue for CONT-PMD size hugetlb in
follow_huge_pmd().
To fix above issues, rename the follow_huge_pmd() as follow_huge_pmd_pte()
to handle PMD and PTE level size hugetlb, which uses huge_pte_lock() to
get the correct pte entry lock to make the pte entry stable.
Mike said:
Support for CONT_PMD/_PTE was added with bb9dd3df8e ("arm64: hugetlb:
refactor find_num_contig()"). Patch series "Support for contiguous pte
hugepages", v4. However, I do not believe these code paths were
executed until migration support was added with 5480280d3f ("arm64/mm:
enable HugeTLB migration for contiguous bit HugeTLB pages") I would go
with 5480280d3f for the Fixes: targe.
Link: https://lkml.kernel.org/r/635f43bdd85ac2615a58405da82b4d33c6e5eb05.1662017562.git.baolin.wang@linux.alibaba.com
Fixes: 5480280d3f ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a7ba45b1a435e7097ca0f79a847d0949d0eb088 upstream.
memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call. As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file. Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.
Prior to 347c4a8747 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses. The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through. With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection. Instead, let's check the superblock
and dentry type.
Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes: 347c4a8747 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org> [3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec5895c0f2d87b9bf4185db1915e40fa6fcfc0ac ]
Function mc146818_get_time() contains an elaborate mechanism of reading
the RTC time while no RTC update is in progress. It turns out that
reading the RTC alarm clock also requires avoiding the RTC update.
Therefore, the mechanism in mc146818_get_time() should be reused - so
extract it into a separate function.
The logic in mc146818_avoid_UIP() is same as in mc146818_get_time()
except that after every
if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) {
there is now "mdelay(1)".
To avoid producing a very unreadable patch, mc146818_get_time() will be
refactored to use mc146818_avoid_UIP() in the next patch.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-6-mat.jonczyk@o2.pl
Stable-dep-of: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea6fa4961aab8f90a8aa03575a98b4bda368d4b6 ]
To prevent an infinite loop in mc146818_get_time(),
commit 211e5db19d15 ("rtc: mc146818: Detect and handle broken RTCs")
added a check for RTC availability. Together with a later fix, it
checked if bit 6 in register 0x0d is cleared.
This, however, caused a false negative on a motherboard with an AMD
SB710 southbridge; according to the specification [1], bit 6 of register
0x0d of this chipset is a scratchbit. This caused a regression in Linux
5.11 - the RTC was determined broken by the kernel and not used by
rtc-cmos.c [3]. This problem was also reported in Fedora [4].
As a better alternative, check whether the UIP ("Update-in-progress")
bit is set for longer then 10ms. If that is the case, then apparently
the RTC is either absent (and all register reads return 0xff) or broken.
Also limit the number of loop iterations in mc146818_get_time() to 10 to
prevent an infinite loop there.
The functions mc146818_get_time() and mc146818_does_rtc_work() will be
refactored later in this patch series, in order to fix a separate
problem with reading / setting the RTC alarm time. This is done so to
avoid a confusion about what is being fixed when.
In a previous approach to this problem, I implemented a check whether
the RTC_HOURS register contains a value <= 24. This, however, sometimes
did not work correctly on my Intel Kaby Lake laptop. According to
Intel's documentation [2], "the time and date RAM locations (0-9) are
disconnected from the external bus" during the update cycle so reading
this register without checking the UIP bit is incorrect.
[1] AMD SB700/710/750 Register Reference Guide, page 308,
https://developer.amd.com/wordpress/media/2012/10/43009_sb7xx_rrg_pub_1.00.pdf
[2] 7th Generation Intel ® Processor Family I/O for U/Y Platforms [...] Datasheet
Volume 1 of 2, page 209
Intel's Document Number: 334658-006,
https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/7th-and-8th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.pdf
[3] Functions in arch/x86/kernel/rtc.c apparently were using it.
[4] https://bugzilla.redhat.com/show_bug.cgi?id=1936688
Fixes: 211e5db19d15 ("rtc: mc146818: Detect and handle broken RTCs")
Fixes: ebb22a059436 ("rtc: mc146818: Dont test for bit 0-5 in Register D")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-5-mat.jonczyk@o2.pl
Stable-dep-of: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7b51bf09baca8e4f80cbe879536842bafb5f31 ]
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: c7aa1a76d4a0 ("netfilter: ipset: regression in ip_set_hash_ip.c")
Signed-off-by: Sasha Levin <sashal@kernel.org>
