There were several files converted to yaml, but the .txt file
is still referenced somewhere else.
Update the references for them to point to the right file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
serial: mcf: add sysrq capability
serial: fsl_lpuart: add sysrq support when using dma
fbcon: remove no-op fbcon_set_origin()
tty/sysrq: Extend the sysrq_key_table to cover capital letters
serial: max310x: rework RX interrupt handling
serial: 8250_dw: Fix clk-notifier/port suspend deadlock
serial: 8250: Skip uninitialized TTY port baud rate update
serial: 8250: Discard RTS/DTS setting from clock update method
tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
serial: 8250_fsl: Fix TX interrupt handling condition
serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
tty: serial: lpuart: fix lpuart32_write usage
serial: qcom_geni_serial: To correct QUP Version detection logic
serial: mvebu-uart: fix unused variable warning
vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
pch_uart: drop double zeroing
...
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for KTD253
Fix-ups:
- Add Device Tree documentation; common, kinetic,ktd253
- Use correct header(s); tosa_lcd, tosa_bl
Bug Fixes:
- Fix refcount imbalance; sky81452-backlight"
* tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: tosa_bl: Include the right header
backlight: tosa_lcd: Include the right header
backlight: Add Kinetic KTD253 backlight driver
dt-bindings: backlight: Add Kinetic KTD253 bindings
dt-bindings: backlight: Add some common backlight properties
backlight: sky81452-backlight: Fix refcount imbalance on error
Pull pin control updates from Linus Walleij:
"Core changes:
- NONE whatsoever, we don't even touch the core files this time
around.
New drivers:
- New driver for the Toshiba Visconti SoC.
- New subdriver for the Qualcomm MSM8226 SoC.
- New subdriver for the Actions Semiconductor S500 SoC.
- New subdriver for the Mediatek MT8192 SoC.
- New subdriver for the Microchip SAMA7G5 SoC.
Driver enhancements:
- Intel Cherryview and Baytrail cleanups and refactorings.
- Enhanced support for the Renesas R8A7790, more pins and groups.
- Some optimizations for the MCP23S08 MCP23x17 variant.
- Some cleanups around the Actions Semiconductor subdrivers.
- A bunch of cleanups around the SH-PFC and Emma Mobile drivers.
- The "SH-PFC" (literally SuperH pin function controller, I think)
subdirectory is now renamed to the more neutral "renesas", as these
are not very much centered around SuperH anymore.
- Non-critical fixes for the Aspeed driver.
- Non-critical fixes for the Ingenic (MIPS!) driver.
- Fix a bunch of missing pins on the AMD pinctrl driver"
* tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits)
pinctrl: amd: Add missing pins to the pin group list
dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks
pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI
pinctrl: mediatek: Free eint data on failure
pinctrl: single: fix debug output when #pinctrl-cells = 2
pinctrl: single: fix pinctrl_spec.args_count bounds check
pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent
pinctrl: cannonlake: Modify COMMUNITY macros to be consistent
pinctrl: tigerlake: Fix register offsets for TGL-H variant
pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2
pinctrl: mediatek: use devm_platform_ioremap_resource_byname()
pinctrl: nuvoton: npcm7xx: Constify static ops structs
pinctrl: mediatek: mt7622: add antsel pins/groups
pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register()
pinctrl: at91-pio4: add support for sama7g5 SoC
dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5
pinctrl: spear: simplify the return expression of tvc_connect()
pinctrl: spear: simplify the return expression of spear310_pinctrl_probe
pinctrl: sprd: use module_platform_driver to simplify the code
pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs.
...
Pull LED updates from Pavel Machek:
"Quite a lot of stuff is going on here. Great cleanups/fixes from Marek
and others are biggest part.
I limited CPU LED trigger to 8 LEDs, because it was willing to
register 1024 'triggers' on machine with 1024 CPUs. I don't believe it
will cause any problems, but we can raise the limit if it does"
* tag 'leds-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (84 commits)
leds: pwm: Remove platform_data support
leds: lm3697: Fix out-of-bound access
leds: ns2: do not guard OF match pointer with of_match_ptr
leds: ns2: convert to fwnode API
leds: tlc591xx: fix leak of device node iterator
leds: pca963x: use struct led_init_data when registering
leds: pca963x: register LEDs immediately after parsing, get rid of platdata
leds: tca6507: remove binding comment
leds: tca6507: cosmetic change: use helper variable
leds: tca6507: do not set GPIO names
dt-bindings: leds: tca6507: convert to YAML
ledtrig-cpu: Limit to 8 CPUs
leds: TODO: Add documentation about possible subsystem improvements
leds: pca9532: read pwm settings from device tree
leds: pca9532: correct shift computation in pca9532_getled
leds: lm36274: Fix warning for undefined parameters
leds: lm3532: Fix warnings for undefined parameters
leds: pca963x: use flexible array
leds: pca963x: cosmetic: rename variables
leds: pca963x: cosmetic: rename variables
...
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
Pull iommu updates from Joerg Roedel:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when
a device tries DMA on memory owned by a guest. This needs new
fault-types as well as a rewrite of the IOMMU memory semaphore for
command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to still be
used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can access
address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
* tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits)
iommu/vt-d: Gracefully handle DMAR units with no supported address widths
iommu/vt-d: Check UAPI data processed by IOMMU core
iommu/uapi: Handle data and argsz filled by users
iommu/uapi: Rename uapi functions
iommu/uapi: Use named union for user data
iommu/uapi: Add argsz for user filled data
docs: IOMMU user API
iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
iommu/arm-smmu-v3: Add SVA device feature
iommu/arm-smmu-v3: Check for SVA features
iommu/arm-smmu-v3: Seize private ASID
iommu/arm-smmu-v3: Share process page tables
iommu/arm-smmu-v3: Move definitions to a header
iommu/io-pgtable-arm: Move some definitions to a header
iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer
iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB
iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR
iommu/amd: Use 4K page for completion wait write-back semaphore
iommu/tegra-smmu: Allow to group clients in same swgroup
iommu/tegra-smmu: Fix iova->phys translation
...
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
scripts/dtc/checks.c:
if (get_property(node, "spi-slave"))
spi_addr_cells = 0;
if (node_addr_cells(node) != spi_addr_cells)
FAIL(c, dti, node, "incorrect #address-cells for SPI bus");
if (node_size_cells(node) != 0)
FAIL(c, dti, node, "incorrect #size-cells for SPI bus");
The above code in check_spi_bus_bridge() require that the number of address
cells must be 0. So we should explicitly declare "#address-cells = <0>".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201013160845.1772-4-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
The Texas Instruments K3 family of SoCs have one or more dual-core
Arm Cortex R5F processor subsystems/clusters (R5FSS). The clusters
can be split between multiple voltage domains as well. Add the device
tree bindings document for these R5F subsystem devices. These R5F
processors do not have an MMU, and so require fixed memory carveout
regions matching the firmware image addresses. The nodes require more
than one memory region, with the first memory region used for DMA
allocations at runtime. The remaining memory regions are reserved
and are used for the loading and running of the R5F remote processors.
The R5F processors can also optionally use any internal on-chip SRAM
memories either for executing code or using it as fast-access data.
The added example illustrates the DT nodes for the single R5FSS device
present on K3 AM65x family of SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20201002234234.20704-2-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull hwmon updates from Guenter Roeck:
"New driver and chip support:
- Moortec MR75203 PVT controller
- MPS Multi-phase mp2975 controller
- ADM1266
- Zen3 CPUs
- Intel MAX 10 BMC
Enhancements:
- Support for rated attributes in hwmon core
- MAX20730:
- Device monitoring via debugfs
- VOUT readin adjustment vie devicetree bindings
- LM75:
- Devicetree support
- Regulator support
- Improved accumulationm logic in amd_energy driver
- Added fan sensor to gsc-hwmon driver
- Support for simplified I2C probing
Various other minor fixes and improvements"
* tag 'hwmon-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits)
hwmon: (pmbus/max20730) adjust the vout reading given voltage divider
dt-bindings: hwmon: max20730: adding device tree doc for max20730
hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller
hwmon: Add DT bindings schema for PVT controller
dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
dt-bindings: hwmon: Convert lm75 bindings to yaml
docs: hwmon: (ltc2945) update datasheet link
hwmon: (mlxreg-fan) Fix double "Mellanox"
hwmon: (pmbus/max20730) add device monitoring via debugfs
hwmon: (pmbus/max34440) Fix OC fault limits
hwmon: (bt1-pvt) Wait for the completion with timeout
hwmon: (bt1-pvt) Cache current update timeout
hwmon: (bt1-pvt) Test sensor power supply on probe
hwmon: (lm75) Add regulator support
hwmon: Add hwmon driver for Intel MAX 10 BMC
dt-bindings: Add MP2975 voltage regulator device
hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller
hwmon: (tmp513) fix spelling typo in comments
hwmon: (amd_energy) Update driver documentation
hwmon: (amd_energy) Improve the accumulation logic
...
Pull GPIO updates from Linus Walleij:
"This time very little driver changes but lots of core changes.
We have some interesting cooperative work for ARM and Intel alike,
making the GPIO subsystem more and more suitable for industrial
systems and the like, in addition to the in-kernel users.
We touch driver core (device properties) and lib/* by adding one
simple string array free function, these are authored by Andy
Shevchenko who is a well known and recognized core helpers maintainers
so this should be fine.
We also see some Android GKI-related modularization in the MXC
drivers.
Core changes:
- The big core change is the updated (v2) userspace character device
API.
This corrects badly designed 64-bit alignment around the line
events. We also add the debounce request feature. This echoes the
often quotes passage from Frederick Brooks "The mythical man-month"
to always throw one away, which we have seen before in things such
as V4L2. So we put in a new one and deprecate and obsolete the old
one.
- All example tools in tools/gpio/* are migrated to the new API to
set a good example. The libgpiod userspace library has been
augmented to use this new API pretty much from day 1.
- Some misc API hardening by using strn* function calls has been
added as well.
- Use the simpler IDA interface for GPIO chip instance enumeration.
- Add device core function for counting string arrays in device
properties.
- Provide a generic library function kfree_strarray() that can be
used throughout the kernel.
Driver enhancements:
- The DesignWare dwapb-gpio driver has been enhanced and now uses the
IRQ handling in the gpiolib core.
- The mockup and aggregator drivers have seen some substantial code
clean-up and now use more of the core kernel inftrastructure.
- Misc cleanups using dev_err_probe().
- The MXC drivers (Freescale/NXP) can now be built modularized, which
makes modularized GKI Android kernels happy"
* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
gpiolib: Update header block in gpiolib-cdev.h
gpiolib: cdev: switch from kstrdup() to kstrndup()
docs: gpio: add a new document to its index.rst
gpio: pca953x: Add support for the NXP PCAL9554B/C
tools: gpio: add debounce support to gpio-event-mon
tools: gpio: add multi-line monitoring to gpio-event-mon
tools: gpio: port gpio-event-mon to v2 uAPI
tools: gpio: port gpio-hammer to v2 uAPI
tools: gpio: rename nlines to num_lines
tools: gpio: port gpio-watch to v2 uAPI
tools: gpio: port lsgpio to v2 uAPI
gpio: uapi: document uAPI v1 as deprecated
gpiolib: cdev: support setting debounce
gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
gpiolib: cdev: support edge detection for uAPI v2
gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
gpiolib: add build option for CDEV v1 ABI
gpiolib: make cdev a build option
...
Pull spi updates from Mark Brown:
"There's quite a lot of changes for SPI in this release but none in the
core, they're all mostly small driver updates and additions. Some of
the more notable changes include:
- A huge set of cleanups, optimizations and improvements for the
DesignWare driver from Serge Semin finishing up the work started
last release.
- Conversion of the Zynq gqspi driver to spi-mem.
- Support for Baikal T1, Broadcom BCMSTB 7445, and Renesas R8A7742"
* tag 'spi-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (137 commits)
spi: cadence: Add SPI transfer delays
spi: dw: Add Baikal-T1 SPI Controller bindings
spi: dw: Add Baikal-T1 SPI Controller glue driver
spi: dw: Add poll-based SPI transfers support
spi: dw: Introduce max mem-ops SPI bus frequency setting
spi: dw: Add memory operations support
spi: dw: Add generic DW SSI status-check method
spi: dw: Move num-of retries parameter to the header file
spi: dw: Explicitly de-assert CS on SPI transfer completion
spi: dw: De-assert chip-select on reset
spi: dw: Discard chip enabling on DMA setup error
spi: dw: Unmask IRQs after enabling the chip
spi: dw: Perform IRQ setup in a dedicated function
spi: dw: Refactor IRQ-based SPI transfer procedure
spi: dw: Refactor data IO procedure
spi: dw: Add DW SPI controller config structure
spi: dw: Update Rx sample delay in the config function
spi: dw: Simplify the SPI bus speed config procedure
spi: dw: Update SPI bus speed in a config function
spi: dw: Detach SPI device specific CR0 config method
...
Pull regulator updates from Mark Brown:
"This is a fairly small release for the regulator API, there's quite a
few new devices supported and some important improvements around
coupled regulators in the core but mostly just small fixes and
improvements otherwise.
Summary:
- Fixes and cleanups around the handling of coupled regulators.
- A special driver for some Raspberry Pi panels with some unusually
custom stuff around them.
- Support for Qualcomm PM660/PM660L, PM8950 and PM8953, Richtek
RT4801 and RTMV20, Rohm BD9576MUF and BD9573MUF"
* tag 'regulator-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (89 commits)
regulator: bd9576: Fix print
regulator: bd9576: fix regulator binfdings dt node names
dt-bindings: regulator: document pm8950 and pm8953 smd regulators
regulator: qcom_smd: add pm8953 regulators
regulator: Make constraint debug processing conditional on DEBUG
regulator: qcom: labibb: Constify static structs
regulator: dt-bindings: Document the PM660/PM660L PMICs entries
regulator: qcom_smd: Add PM660/PM660L regulator support
regulator: dt-bindings: Document the PM660/660L SPMI PMIC entries
regulator: qcom_spmi: Add PM660/PM660L regulators
regulator: qcom_spmi: Add support for new regulator types
regulator: core: Enlarge max OF property name length to 64 chars
regulator: tps65910: use regmap accessors
regulator: rtmv20: Add missing regcache cache only before marked as dirty
regulator: rtmv20: Update DT binding document and property name parsing
regulator: rtmv20: Add DT-binding document for Richtek RTMV20
regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator
regulator: resolve supply after creating regulator
regulator: print symbolic errors in kernel messages
regulator: print state at boot
...
Pull media updates from Mauro Carvalho Chehab:
- the usbvision driver was dropped from staging
- the Zoran driver were re-added at staging. It gained lots of
improvements, and was converted to use videobuf2 API
- a new virtual driver (vidtv) was added in order to allow testing the
digital TV framework and APIs
- the media uAPI documentation gained a glossary with commonly used
terms, helping to simplify some parts of the docs
- more cleanups at the atomisp driver
- Mediatek VPU gained support for MT8183
- added support for codecs with supports doing colorspace conversion
(CSC)
- support for CSC API was added at vivid and rksip1 drivers
- added a helper core support and uAPI for better supporting H.264
codecs
- added support for Renesas R8A774E1
- use the new SPDX GFDL-1.1-no-invariants-or-later license on media
uAPI docs, instead of a license text
- Venus driver has gained VP9 codec support
- lots of other cleanups and driver improvements
* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
media: tvp7002: fix uninitialized variable warning
media: s5k5baf: drop 'data' field in struct s5k5baf_fw
media: dt-bindings: media: venus: Add an optional power domain for perf voting
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
media: staging: rkisp1: uapi: Do not use BIT() macro
media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
media: usbtv: Fix refcounting mixup
media: zoran.rst: place it at the right place this time
media: add Zoran cardlist
media: admin-guide: update cardlists
media: siano: rename a duplicated card string
media: zoran: move documentation file to the right place
media: atomisp: fixes build breakage for ISP2400 due to a cleanup
media: zoran: fix mixed case on vars
media: zoran: get rid of an unused var
media: zoran: use upper case for card types
media: zoran: fix sparse warnings
media: zoran: fix smatch warning
media: zoran: update TODO
...
Pull MMC updates from Ulf Hansson:
"MMC core:
- Export SDIO revision and info strings to userspace
- Add support for specifying mmc/mmcblk index via mmc aliases in DT
MMC host:
- Enable support for async probe for all mmc host drivers
- Enable compile testing of multiple host drivers
- dw_mmc: Enable the Synopsys DesignWare driver for RISCV and CSKY
- mtk-sd: Fixup support for CQHCI
- owl-mmc: Add support for the actions,s700-mmc variant
- renesas_sdhi: Fix regression (temporary) for re-insertion of SD cards
- renesas_sdhi: Add support for the r8a774e1 variant
- renesas_sdhi/tmio: Improvements for tunings
- renesas_sdhi/tmio: Rework support for reset of controller
- sdhci-acpi: Fix HS400 tuning for devices with invalid presets on AMDI0040
- sdhci_am654: Improve support for tunings
- sdhci_am654: Add support for input tap delays
- sdhci_am654: Add workaround for card detect debounce timer
- sdhci-am654: Add support for the TI's J7200 variants
- sdhci-esdhc-imx: Fix support for manual tuning
- sdhci-iproc: Enable support for eMMC DDR 3.3V for bcm2711
- sdhci-msm: Fix stability issues with HS400 for sc7180
- sdhci-of-sparx5: Add Sparx5 SoC eMMC driver
- sdhci-of-esdhc: Fixup reference clock source selection
- sdhci-pci: Add LTR support for some Intel BYT controllers
- sdhci-pci-gli: Add CQHCI Support for GL9763E"
* tag 'mmc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
mmc: sdhci_am654: Fix module autoload
mmc: renesas_sdhi: workaround a regression when reinserting SD cards
mmc: sdhci-pci-gli: Add CQHCI Support for GL9763E
mmc: sdhci-acpi: AMDI0040: Set SDHCI_QUIRK2_PRESET_VALUE_BROKEN
mmc: sdhci_am654: Enable tuning for SDR50
mmc: sdhci_am654: Add support for software tuning
mmc: sdhci_am654: Add support for input tap delay
mmc: sdhci_am654: Fix hard coded otap delay array size
dt-bindings: mmc: sdhci-am654: Add documentation for input tap delay
dt-bindings: mmc: sdhci-am654: Convert sdhci-am654 controller documentation to json schema
mmc: sdhci-of-esdhc: fix reference clock source selection
mmc: host: fix depends for MMC_MESON_GX w/ COMPILE_TEST
mmc: sdhci-s3c: hide forward declaration of of_device_id behind CONFIG_OF
mmc: sdhci: fix indentation mistakes
mmc: moxart: remove unneeded check for drvdata
mmc: renesas_sdhi: drop local flag for tuning
mmc: rtsx_usb_sdmmc: simplify the return expression of sd_change_phase()
mmc: core: document mmc_hw_reset()
mmc: mediatek: Drop pointer to mmc_host from msdc_host
dt-bindings: mmc: owl: add compatible string actions,s700-mmc
...
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
The ARM MHU's reference manual states following:
"The MHU drives the signal using a 32-bit register, with all 32 bits
logically ORed together. The MHU provides a set of registers to enable
software to set, clear, and check the status of each of the bits of this
register independently. The use of 32 bits for each interrupt line
enables software to provide more information about the source of the
interrupt. For example, each bit of the register can be associated with
a type of event that can contribute to raising the interrupt."
This patch thus extends the MHU controller's DT binding to add support
for doorbell mode.
Though the same MHU hardware controller is used in the two modes, A new
compatible string is added here to represent the combination of the MHU
hardware and the firmware sitting on the other side (which expects each
bit to represent a different signal now).
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Allow trimming of interrupt hierarchy to support odd hardware
setups where only a subset of the interrupts requires the full
hierarchy.
- Allow the retrigger mechanism to follow a hierarchy to simplify
driver code.
- Provide a mechanism to force enable wakeup interrrupts on suspend.
- More infrastructure to handle IPIs in the core code
Architectures:
- Convert ARM/ARM64 IPI handling to utilize the interrupt core code.
Drivers:
- The usual pile of new interrupt chips (MStar, Actions Owl, TI
PRUSS, Designware ICTL)
- ARM(64) IPI related conversions
- Wakeup support for Qualcom PDC
- Prevent hierarchy corruption in the NVIDIA Tegra driver
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
dt-bindings: interrupt-controller: Add MStar interrupt controller
irqchip/irq-mst: Add MStar interrupt controller support
soc/tegra: pmc: Don't create fake interrupt hierarchy levels
soc/tegra: pmc: Allow optional irq parent callbacks
gpio: tegra186: Allow optional irq parent callbacks
genirq/irqdomain: Allow partial trimming of irq_data hierarchy
irqchip/qcom-pdc: Reset PDC interrupts during init
irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Use return value from irq_set_wake() call
pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
ARM: Handle no IPI being registered in show_ipi_list()
MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller
irqchip: Add Actions Semi Owl SIRQ controller
dt-bindings: interrupt-controller: Add Actions SIRQ controller binding
dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller
irqchip/dw-apb-ictl: Add primary interrupt controller support
irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains
genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
...
Pull timekeeping updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core:
- Early boot support for the NMI safe timekeeper by utilizing
local_clock() up to the point where timekeeping is initialized.
This allows printk() to store multiple timestamps in the ringbuffer
which is useful for coordinating dmesg information across a fleet
of machines.
- Provide a multi-timestamp accessor for printk()
- Make timer init more robust by checking for invalid timer flags.
- Comma vs semicolon fixes
Drivers:
- Support for new platforms in existing drivers (SP804 and Renesas
CMT)
- Comma vs semicolon fixes
* tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/armada-370-xp: Use semicolons rather than commas to separate statements
clocksource/drivers/mps2-timer: Use semicolons rather than commas to separate statements
timers: Mask invalid flags in do_init_timer()
clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
clocksource/drivers/sp804: Add support for Hisilicon sp804 timer
clocksource/drivers/sp804: Support non-standard register offset
clocksource/drivers/sp804: Prepare for support non-standard register offset
clocksource/drivers/sp804: Remove a mismatched comment
clocksource/drivers/sp804: Delete the leading "__" of some functions
clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h
clocksource/drivers/sp804: Cleanup clk_get_sys()
dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support
alarmtimer: Convert comma to semicolon
timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper
timekeeping: Utilize local_clock() for NMI safe timekeeper during early boot
Document all ARMv5, ARMv6 and ARMv7 i.MX compatibles to fix dtbs_check
warnings like:
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dt.yaml: pwm@2080000: compatible:0:
'fsl,imx6q-pwm' is not one of ['fsl,imx8mm-pwm', 'fsl,imx8mn-pwm', 'fsl,imx8mp-pwm', 'fsl,imx8mq-pwm']
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200925212609.23093-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull EDAC updates from Borislav Petkov:
- Add Amazon's Annapurna Labs memory controller EDAC driver (Talel
Shenhar)
- New AMD CPUs support (Yazen Ghannam)
- The usual misc fixes and cleanups all over the subsystem
* tag 'edac_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Set proper family type for Family 19h Models 20h-2Fh
EDAC/mc_sysfs: Add missing newlines when printing {max,dimm}_location
EDAC/aspeed: Use module_platform_driver() to simplify
EDAC, sb_edac: Simplify switch statement
EDAC/ti: Fix handling of platform_get_irq() error
EDAC/aspeed: Fix handling of platform_get_irq() error
EDAC/i5100: Fix error handling order in i5100_init_one()
EDAC/highbank: Handover Calxeda Highbank maintenance to Andre Przywara
EDAC/socfpga: Transfer SoCFPGA EDAC maintainership
EDAC/thunderx: Make symbol lmc_dfs_ents static
EDAC/al-mc-edac: Add Amazon's Annapurna Labs Memory Controller driver
dt-bindings: EDAC: Add Amazon's Annapurna Labs Memory Controller binding
EDAC/mce_amd: Add new error descriptions for existing types
EDAC: Replace HTTP links with HTTPS ones
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
Pull tpm updates from Jarkko Sakkinen:
"Support for a new TPM device and fixes and Git URL change (infraded ->
korg)"
* tag 'tpmdd-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
MAINTAINERS: TPM DEVICE DRIVER: Update GIT
tpm_tis: Add a check for invalid status
tpm: use %*ph to print small buffer
dt-bindings: Add SynQucer TPM MMIO as a trivial device
tpm: tis: add support for MMIO TPM on SynQuacer
Add a yamllint config file and support for running yamllint on DT
binding schema files. This runs on the whole tree as yamllint is Python
and suffers from Python's slow startup times.
Users can run on individual files doing:
yamllint -c Documentation/devicetree/bindings/.yamllint <binding file>
Link: https://lore.kernel.org/r/20201009170557.168785-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d
SPI NOR controller drivers changes:
- intel-spi:
- Add Alder Lake-S PCI ID
Pull irqchip updates from Marc Zyngier:
Core changes:
- Allow irq retriggering to follow a hierarchy
- Allow interrupt hierarchies to be trimmed at allocation time
- Allow interrupts to be hidden from /proc/interrupts (IPIs)
- Introduce stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
- New per-cpu IPI handling flow
Architecture changes:
- Move arm/arm64 IPI handling to the core interrupt code, removing
the home brewed accounting
Driver updates:
- New driver for the MStar (and more recently Mediatek) platforms
- New driver for the Actions Owl SIRQ controller
- New driver for the TI PRUSS infrastructure
- Wake-up support for the Qualcomm PDC controller
- Primary interrupt controller support for the Designware APB ICTL
- Convert the IPI code for GIC, GICv3, hip04, armada-270-xp and bcm2836
to using standard interrupts
- Improve GICv3 pseudo-NMI support to deal with both non-secure and secure
priorities on arm64
- Convert the GIC/GICv3 drivers to using HW-based irq retrigger
- A sprinkling of dev_err_probe() conversion
- A set of NVIDIA Tegra fixes for interrupt hierarchy corruption
- A reset fix for the Loongson HTVEC driver
- A couple of error handling fixes in the TI SCI drivers
