The verifier trace changed following a bugfix. After checking the 64-bit
sign, only the upper bit mask is known, not bit 31. Update the test
accordingly.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test fails because of a recent fix to the verifier, even though this
program is valid. In details what happens is:
7: (61) r1 = *(u32 *)(r0 +0)
Load a 32-bit value, with signed bounds [S32_MIN, S32_MAX]. The bounds
of the 64-bit value are [0, U32_MAX]...
8: (65) if r1 s> 0xffffffff goto pc+1
... therefore this is always true (the operand is sign-extended).
10: (b4) w2 = 11
11: (6d) if r2 s> r1 goto pc+1
When true, the 64-bit bounds become [0, 10]. The 32-bit bounds are still
[S32_MIN, 10].
13: (64) w1 <<= 2
Because this is a 32-bit operation, the verifier propagates the new
32-bit bounds to the 64-bit ones, and the knowledge gained from insn 11
is lost.
14: (0f) r0 += r1
15: (7a) *(u64 *)(r0 +0) = 4
Then the verifier considers r0 unbounded here, rejecting the test. To
make the test work, change insn 8 to check the sign of the 32-bit value.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.
In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A few of the tests in test_offload.py expects to see a certain number of
maps created, and checks this by counting the number of maps returned by
bpftool. There is already a filter that will remove any maps already there
at the beginning of the test, but bpftool now creates a map for the PID
iterator rodata on each invocation, which makes the map count wrong. Fix
this by also filtering the pid_iter.rodata map by name when counting.
Fixes: d53dee3fe0 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226387.110217.9887866138149423444.stgit@toke.dk
When setting the ethtool feature flag fails (as expected for the test), the
kernel now tracks that the feature was requested to be 'off' and refuses to
subsequently disable it again. So reset it back to 'on' so a subsequent
disable (that's not supposed to fail) can succeed.
Fixes: 417ec26477 ("selftests/bpf: add offload test based on netdevsim")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226280.110217.10696241563705667871.stgit@toke.dk
Since commit 6f8a57ccf8 ("bpf: Make verifier log more relevant by
default"), the verifier discards log messages for successfully-verified
programs. This broke test_offload.py which is looking for a verification
message from the driver callback. Change test_offload.py to use the toggle
in netdevsim to make the verification fail before looking for the
verification message.
Fixes: 6f8a57ccf8 ("bpf: Make verifier log more relevant by default")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226069.110217.12370824996153348073.stgit@toke.dk
Avoid occasional test failures due to the last sample being delayed to
another ring_buffer__poll() call. Instead, drain samples completely with
ring_buffer__consume(). This is supposed to fix a rare and non-deterministic
test failure in libbpf CI.
Fixes: cb1c9ddd55 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-2-andrii@kernel.org
Fix ring_buffer__poll() to return the number of non-discarded records
consumed, just like its documentation states. It's also consistent with
ring_buffer__consume() return. Fix up selftests with wrong expected results.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Fixes: cb1c9ddd55 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-1-andrii@kernel.org
Currently verifier enforces return code checks for subprograms in the
same manner as it does for program entry points. This prevents returning
arbitrary scalar values from subprograms. Scalar type of returned values
is checked by btf_prepare_func_args() and hence it should be safe to
allow only scalars for now. Relax return code checks for subprograms and
allow any correct scalar values.
Fixes: 51c39bb1d5 (bpf: Introduce function-by-function verification)
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201113171756.90594-1-me@ubique.spb.ru
If BPF code contains unused BPF subprogram and there are no other subprogram
calls (which can realistically happen in real-world applications given
sufficiently smart Clang code optimizations), libbpf will erroneously assume
that subprograms are entry-point programs and will attempt to load them with
UNSPEC program type.
Fix by not relying on subcall instructions and rather detect it based on the
structure of BPF object's sections.
Fixes: 9a94f277c4 ("tools: libbpf: restore the ability to load programs from .text section")
Reported-by: Dmitrii Banshchikov <dbanschikov@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201107000251.256821-1-andrii@kernel.org
Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).
The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.
A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
This updates the test_tc_neigh prog in selftests to use the new syntax of
bpf_redirect_neigh(). To exercise the helper both with and without the
optional parameter, add an additional test_tc_neigh_fib test program, which
does a bpf_fib_lookup() followed by a call to bpf_redirect_neigh() instead
of looking up the ifindex in a map.
Update the test_tc_redirect.sh script to run both versions of the test,
and while we're add it, fix it to work on systems that have a consolidated
dual-stack 'ping' binary instead of separate ping/ping6 versions.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/160322915724.32199.17530068594636950447.stgit@toke.dk
This patch tests all pointers returned by bpf_per_cpu_ptr() must be
tested for NULL first before it can be accessed.
This patch adds a subtest "null_check", so it moves the ".data..percpu"
existence check to the very beginning and before doing any subtest.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201019194225.1051596-1-kafai@fb.com
This patch tests:
int bpf_cls(struct __sk_buff *skb)
{
/* REG_6: sk
* REG_7: tp
* REG_8: req_sk
*/
sk = skb->sk;
if (!sk)
return 0;
tp = bpf_skc_to_tcp_sock(sk);
req_sk = bpf_skc_to_tcp_request_sock(sk);
if (!req_sk)
return 0;
/* !tp has not been tested, so verifier should reject. */
return *(__u8 *)tp;
}
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201019194219.1051314-1-kafai@fb.com
The tcp_hdr_options test adds a "::eB9F" addr to the lo dev.
However, this non loopback address will have a race on ipv6 dad
which may lead to EADDRNOTAVAIL error from time to time.
Even nodad is used in the iproute2 command, there is still a race in
when the route will be added. This will then lead to ENETUNREACH from
time to time.
To avoid the above, this patch uses the default loopback address "::1"
to do the test.
Fixes: ad2f8eb009 ("bpf: selftests: Tcp header options")
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201012234940.1707941-1-kafai@fb.com
The 64-bit JEQ/JNE handling in reg_set_min_max() was clearing reg->id in either
true or false branch. In the case 'if (reg->id)' check was done on the other
branch the counter part register would have reg->id == 0 when called into
find_equal_scalars(). In such case the helper would incorrectly identify other
registers with id == 0 as equivalent and propagate the state incorrectly.
Fix it by preserving ID across reg_set_min_max().
In other words any kind of comparison operator on the scalar register
should preserve its ID to recognize:
r1 = r2
if (r1 == 20) {
#1 here both r1 and r2 == 20
} else if (r2 < 20) {
#2 here both r1 and r2 < 20
}
The patch is addressing #1 case. The #2 was working correctly already.
Fixes: 75748837b7 ("bpf: Propagate scalar ranges through register assignments.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201014175608.1416-1-alexei.starovoitov@gmail.com
Here we add three new tests for sockmap to test having a verdict program
without setting the parser program.
The first test covers the most simply case,
sender proxy_recv proxy_send recv
| | |
| verdict -----+ |
| | | |
+----------------+ +------------+
We load the verdict program on the proxy_recv socket without a
parser program. It then does a redirect into the send path of the
proxy_send socket using sendpage_locked().
Next we test the drop case to ensure if we kfree_skb as a result of
the verdict program everything behaves as expected.
Next we test the same configuration above, but with ktls and a
redirect into socket ingress queue. Shown here
tls tls
sender proxy_recv proxy_send recv
| | |
| verdict ------------------+
| | redirect_ingress
+----------------+
Also to set up ping/pong test
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160239302638.8495.17125996694402793471.stgit@john-Precision-5820-Tower
Add option to allow running without a parser program in place. To test
with ping/pong program use,
# test_sockmap -t ping --txmsg_omit_skb_parser
this will send packets between two socket bouncing through a proxy
socket that does not use a parser program.
(ping) (pong)
sender proxy_recv proxy_send recv
| | |
| verdict -----+ |
| | | |
+----------------+ +------------+
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160239300387.8495.11908295143121563076.stgit@john-Precision-5820-Tower
Rename into test_tc_redirect.sh and move setup and test code into separate
functions so they can be reused for newly added tests in here. Also remove
the crude hack to override ifindex inside the object file via xxd and sed
and just use a simple map instead. Map given iproute2 does not support BTF
fully and therefore neither global data at this point.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201010234006.7075-6-daniel@iogearbox.net
The main purpose of the profiler test to check different llvm generation
patterns to make sure the verifier can load these large programs.
Note that profiler.inc.h test doesn't follow strict kernel coding style.
The code was formatted in the kernel style, but variable declarations are
kept as-is to preserve original llvm IR pattern.
profiler1.c should pass with older and newer llvm
profiler[23].c may fail on older llvm that don't have:
https://reviews.llvm.org/D85570
because llvm may do speculative code motion optimization that
will generate code like this:
// r9 is a pointer to map_value
// r7 is a scalar
17: bf 96 00 00 00 00 00 00 r6 = r9
18: 0f 76 00 00 00 00 00 00 r6 += r7
19: a5 07 01 00 01 01 00 00 if r7 < 257 goto +1
20: bf 96 00 00 00 00 00 00 r6 = r9
// r6 is used here
The verifier will reject such code with the error:
"math between map_value pointer and register with unbounded min value is not allowed"
At insn 18 the r7 is indeed unbounded. The later insn 19 checks the bounds and
the insn 20 undoes map_value addition. It is currently impossible for the
verifier to understand such speculative pointer arithmetic. Hence llvm D85570
addresses it on the compiler side.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201009011240.48506-4-alexei.starovoitov@gmail.com
The llvm register allocator may use two different registers representing the
same virtual register. In such case the following pattern can be observed:
1047: (bf) r9 = r6
1048: (a5) if r6 < 0x1000 goto pc+1
1050: ...
1051: (a5) if r9 < 0x2 goto pc+66
1052: ...
1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */
This is normal behavior of greedy register allocator.
The slides 137+ explain why regalloc introduces such register copy:
http://llvm.org/devmtg/2018-04/slides/Yatsina-LLVM%20Greedy%20Register%20Allocator.pdf
There is no way to tell llvm 'not to do this'.
Hence the verifier has to recognize such patterns.
In order to track this information without backtracking allocate ID
for scalars in a similar way as it's done for find_good_pkt_pointers().
When the verifier encounters r9 = r6 assignment it will assign the same ID
to both registers. Later if either register range is narrowed via conditional
jump propagate the register state into the other register.
Clear register ID in adjust_reg_min_max_vals() for any alu instruction. The
register ID is ignored for scalars in regsafe() and doesn't affect state
pruning. mark_reg_unknown() clears the ID. It's used to process call, endian
and other instructions. Hence ID is explicitly cleared only in
adjust_reg_min_max_vals() and in 32-bit mov.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201009011240.48506-2-alexei.starovoitov@gmail.com
ld's --build-id defaults to "sha1" style, while lld defaults to "fast".
The build IDs are very different between the two, which may confuse
programs that reference them.
Signed-off-by: Bill Wendling <morbo@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add selftests validating libbpf's auto-resizing of load/store instructions
when used with CO-RE relocations. An explicit and manual approach with using
bpf_core_read() is also demonstrated and tested. Separate BPF program is
supposed to fail due to using signed integers of sizes that differ from
kernel's sizes.
To reliably simulate 32-bit BTF (i.e., the one with sizeof(long) ==
sizeof(void *) == 4), selftest generates its own custom BTF and passes it as
a replacement for real kernel BTF. This allows to test 32/64-bitness mix on
all architectures.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-5-andrii@kernel.org
Commit 4976b718c3 ("bpf: Introduce pseudo_btf_id") switched
the order of check_subprogs() and resolve_pseudo_ldimm() in
the verifier. Now an empty prog expects to see the error "last
insn is not an the prog of a single invalid ldimm exit or jmp"
instead, because the check for subprogs comes first. It's now
pointless to validate that half of ldimm64 won't be the last
instruction.
Tested:
# ./test_verifier
Summary: 1129 PASSED, 537 SKIPPED, 0 FAILED
and the full set of bpf selftests.
Fixes: 4976b718c3 ("bpf: Introduce pseudo_btf_id")
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201007022857.2791884-1-haoluo@google.com
Test bpf_per_cpu_ptr() and bpf_this_cpu_ptr(). Test two paths in the
kernel. If the base pointer points to a struct, the returned reg is
of type PTR_TO_BTF_ID. Direct pointer dereference can be applied on
the returned variable. If the base pointer isn't a struct, the
returned reg is of type PTR_TO_MEM, which also supports direct pointer
dereference.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200929235049.2533242-7-haoluo@google.com
Selftests for typed ksyms. Tests two types of ksyms: one is a struct,
the other is a plain int. This tests two paths in the kernel. Struct
ksyms will be converted into PTR_TO_BTF_ID by the verifier while int
typed ksyms will be converted into PTR_TO_MEM.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200929235049.2533242-4-haoluo@google.com
This patch adds a test to ensure the child sk inherited everything
from the bpf_sock_ops_cb_flags of the listen sk:
1. Sets one more cb_flags (BPF_SOCK_OPS_STATE_CB_FLAG) to the listen sk
in test_tcp_hdr_options.c
2. Saves the skops->bpf_sock_ops_cb_flags when handling the newly
established passive connection
3. CHECK() it is the same as the listen sk
This also covers the fastopen case as the existing test_tcp_hdr_options.c
does.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201002013454.2542367-1-kafai@fb.com
When using -Werror=missing-braces, compiler complains about missing braces.
Let's use use ={} initialization which should do the job:
tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function 'test_sockmap_iter':
tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:181:8: error: missing braces around initializer [-Werror=missing-braces]
union bpf_iter_link_info linfo = {0};
^
tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:181:8: error: (near initialization for 'linfo.map') [-Werror=missing-braces]
tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: At top level:
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201002000451.1794044-1-sdf@google.com
Fixes clang error:
tools/testing/selftests/bpf/prog_tests/xdp_noinline.c:35:6: error: variable 'duration' is uninitialized when used here [-Werror,-Wuninitialized]
if (CHECK(!skel, "skel_open_and_load", "failed\n"))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201001225440.1373233-1-sdf@google.com
Add tests for perf event array with and without BPF_F_PRESERVE_ELEMS.
Add a perf event to array via fd mfd. Without BPF_F_PRESERVE_ELEMS, the
perf event is removed when mfd is closed. With BPF_F_PRESERVE_ELEMS, the
perf event is removed when the map is freed.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200930224927.1936644-3-songliubraving@fb.com
Fix a build failure on arm64, due to missing alignment information for
the .BTF_ids section:
resolve_btfids.test.o: in function `test_resolve_btfids':
tools/testing/selftests/bpf/prog_tests/resolve_btfids.c:140:(.text+0x29c): relocation truncated to fit: R_AARCH64_LDST32_ABS_LO12_NC against `.BTF_ids'
ld: tools/testing/selftests/bpf/prog_tests/resolve_btfids.c:140: warning: one possible cause of this error is that the symbol is being referenced in the indicated code as if it had a larger alignment than was declared where it was defined
In vmlinux, the .BTF_ids section is aligned to 4 bytes by vmlinux.lds.h.
In test_progs however, .BTF_ids doesn't have alignment constraints. The
arm64 linker expects the btf_id_set.cnt symbol, a u32, to be naturally
aligned but finds it misaligned and cannot apply the relocation. Enforce
alignment of .BTF_ids to 4 bytes.
Fixes: cd04b04de1 ("selftests/bpf: Add set test to resolve_btfids")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200930093559.2120126-1-jean-philippe@linaro.org
This test makes a lot of narrow load checks while assuming little
endian architecture, and therefore fails on s390.
Fix by introducing LSB and LSW macros and using them to perform narrow
loads.
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200929201814.44360-1-iii@linux.ibm.com
On my systems system() calls are marked with warn_unused_result
apparently. So without error checking we get this warning,
./prog_tests/snprintf_btf.c:30:9: warning: ignoring return value
of ‘system’, declared with attribute warn_unused_result[-Wunused-result]
Also it seems like a good idea to check the return value anyways
to ensure ping exists even if its seems unlikely.
Fixes: 076a95f5af ("selftests/bpf: Add bpf_snprintf_btf helper tests")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160141006897.25201.12095049414156293265.stgit@john-Precision-5820-Tower
