The driver allocates queues for all the units it potentially
supports. But if we fail to detect any drives, then we fail
loading the module without cleaning up those queues. This is
now evident with the switch to blk-mq, though the bug has
been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 71f6fa90a3 ("HID: increase maximum global item tag report size
to 256") increases the max report size from 128 to 256.
We also need to update the report size in hid_field_extract() otherwise
it complains and truncates now valid report size:
[ 406.165461] hid-sensor-hub 001F:8086:22D8.0002: hid_field_extract() called with n (192) > 32! (kworker/5:1)
BugLink: https://bugs.launchpad.net/bugs/1818547
Fixes: 71f6fa90a3 ("HID: increase maximum global item tag report size to 256")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When using this driver with the wireless dongle and some usermode
program that monitors every input device (acpid, for example), while
another usermode client opens and closes the low-level device
repeadedly, the system eventually deadlocks.
The reason is that steam_input_register_device() must not be called with
the mutex held, because the input subsystem has its own synchronization
that clashes with this one: it is possible that steam_input_open() is
called before input_register_device() returns, and since
steam_input_open() needs to lock the mutex, it deadlocks.
However we must hold the mutex when calling any function that sends
commands to the controller. If not, random commands end up falling fail.
Reported-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de>
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Not only the 603 but all 6xx need SPRN_SPRG_PGDIR to be initialised at
startup. This patch move it from __setup_cpu_603() to start_here()
and __secondary_start(), close to the initialisation of SPRN_THREAD.
Previously, virt addr of PGDIR was retrieved from thread struct.
Now that it is the phys addr which is stored in SPRN_SPRG_PGDIR,
hash_page() shall not convert it to phys anymore.
This patch removes the conversion.
Fixes: 93c4a162b0 ("powerpc/6xx: Store PGDIR physical address in a SPRG")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The function snd_opl3_drum_switch declaration in the header file
has the order of the two arguments on_off and vel swapped when
compared to the definition arguments of vel and on_off. Fix this
by swapping them around to match the definition.
This error predates the git history, so no idea when this error
was introduced.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Building with clang finds a mistaken __init tag:
WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host()
The function davinci_mmcsd_probe() references
the function __init init_mmcsd_host().
This is often because davinci_mmcsd_probe lacks a __init
annotation or the annotation of init_mmcsd_host is wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
clang points out several instances of mismatched types in this drivers,
all coming from a single declaration:
drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to
different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion]
direction = DMA_DEV_TO_MEM;
~ ^~~~~~~~~~~~~~
drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to
different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion]
tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction,
The behavior is correct, so this must be a simply typo from
dma_data_direction and dma_transfer_direction being similarly named
types with a similar purpose.
Fixes: 6464b71409 ("mmc: pxamci: switch over to dmaengine use")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Jakub Drnec reported:
Setting the realtime clock can sometimes make the monotonic clock go
back by over a hundred years. Decreasing the realtime clock across
the y2k38 threshold is one reliable way to reproduce. Allegedly this
can also happen just by running ntpd, I have not managed to
reproduce that other than booting with rtc at >2038 and then running
ntp. When this happens, anything with timers (e.g. openjdk) breaks
rather badly.
And included a test case (slightly edited for brevity):
#define _POSIX_C_SOURCE 199309L
#include <stdio.h>
#include <time.h>
#include <stdlib.h>
#include <unistd.h>
long get_time(void) {
struct timespec tp;
clock_gettime(CLOCK_MONOTONIC, &tp);
return tp.tv_sec + tp.tv_nsec / 1000000000;
}
int main(void) {
long last = get_time();
while(1) {
long now = get_time();
if (now < last) {
printf("clock went backwards by %ld seconds!\n", last - now);
}
last = now;
sleep(1);
}
return 0;
}
Which when run concurrently with:
# date -s 2040-1-1
# date -s 2037-1-1
Will detect the clock going backward.
The root cause is that wtom_clock_sec in struct vdso_data is only a
32-bit signed value, even though we set its value to be equal to
tk->wall_to_monotonic.tv_sec which is 64-bits.
Because the monotonic clock starts at zero when the system boots the
wall_to_montonic.tv_sec offset is negative for current and future
dates. Currently on a freshly booted system the offset will be in the
vicinity of negative 1.5 billion seconds.
However if the wall clock is set past the Y2038 boundary, the offset
from wall to monotonic becomes less than negative 2^31, and no longer
fits in 32-bits. When that value is assigned to wtom_clock_sec it is
truncated and becomes positive, causing the VDSO assembly code to
calculate CLOCK_MONOTONIC incorrectly.
That causes CLOCK_MONOTONIC to jump ahead by ~4 billion seconds which
it is not meant to do. Worse, if the time is then set back before the
Y2038 boundary CLOCK_MONOTONIC will jump backward.
We can fix it simply by storing the full 64-bit offset in the
vdso_data, and using that in the VDSO assembly code. We also shuffle
some of the fields in vdso_data to avoid creating a hole.
The original commit that added the CLOCK_MONOTONIC support to the VDSO
did actually use a 64-bit value for wtom_clock_sec, see commit
a7f290dad3 ("[PATCH] powerpc: Merge vdso's and add vdso support to
32 bits kernel") (Nov 2005). However just 3 days later it was
converted to 32-bits in commit 0c37ec2aa8 ("[PATCH] powerpc: vdso
fixes (take #2)"), and the bug has existed since then AFAICS.
Fixes: 0c37ec2aa8 ("[PATCH] powerpc: vdso fixes (take #2)")
Cc: stable@vger.kernel.org # v2.6.15+
Link: http://lkml.kernel.org/r/HaC.ZfES.62bwlnvAvMP.1STMMj@seznam.cz
Reported-by: Jakub Drnec <jaydee@email.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Various rk3328 based boards experience occasional sdmmc0 write errors.
This is due to the rk3328.dtsi tx drive levels being set to 4ma, vs
8ma per the rk3328 datasheet default settings.
Fix this by setting the tx signal pins to 8ma.
Inspiration from tonymac32's patch,
dc1212b347
Fixes issues on the rk3328-roc-cc and the rk3328-rock64 (as per the
above commit message).
Tested on the rk3328-roc-cc board.
Fixes: 52e02d377a ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Several rk3328 based boards experience high rgmii tx error rates.
This is due to several pins in the rk3328.dtsi rgmii pinmux that are
missing a defined pull strength setting.
This causes the pinmux driver to default to 2ma (bit mask 00).
These pins are only defined in the rk3328.dtsi, and are not listed in
the rk3328 specification.
The TRM only lists them as "Reserved"
(RK3328 TRM V1.1, 3.3.3 Detail Register Description, GRF_GPIO0B_IOMUX,
GRF_GPIO0C_IOMUX, GRF_GPIO0D_IOMUX).
However, removal of these pins from the rgmii pinmux definition causes
the interface to fail to transmit.
Also, the rgmii tx and rx pins defined in the dtsi are not consistent
with the rk3328 specification, with tx pins currently set to 12ma and
rx pins set to 2ma.
Fix this by setting tx pins to 8ma and the rx pins to 4ma, consistent
with the specification.
Defining the drive strength for the undefined pins eliminated the high
tx packet error rate observed under heavy data transfers.
Aligning the drive strength to the TRM values eliminated the occasional
packet retry errors under iperf3 testing.
This allows much higher data rates with no recorded tx errors.
Tested on the rk3328-roc-cc board.
Fixes: 52e02d377a ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Problem:
On ASUS Tinker Board S, when booting from the eMMC, and there is card
in the sd slot, there are constant errors.
Also when warm reboot, uboot can not access the sd slot
Cause:
Identified by Robin Murphy @ ARM. The Card Detect on rk3288
devices is pulled up by vccio-sd; so when the regulator powers this
off, card detect gives spurious errors. A second problem, is during
power down, vccio-sd apprears to be powered down. This causes a
problem when warm rebooting from the sd card. This was identified by
Jonas Karlman.
History:
A common fault on these rk3288 board, which impliment the reference
design.
When this arose before:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-August/281153.html
And Ulf and Jaehoon clearly said this was a broken card detect design,
which should be solved via polling
Solution:
Hence broken-cd is set as a property. This cures the errors. The
powering down of vccio-sd during reboot is cured by adding
regulator-boot-on.
This solutions has been fairly widely reviewed and tested.
Fixes: e58c5e739d ("ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi")
Cc: stable@vger.kernel.org
[Heiko: slightly inaccurate fixes but tinker is a sbc (aka like a Pi) where
we can hopefully expect people not to rely on overly old stable kernels]
Signed-off-by: David Summers <beagleboard@davidjohnsummers.uk>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The following error can be seen during boot:
of: /cpus/cpu@501: Couldn't find opp node
Change cpu nodes to use operating-points-v2 in order to fix this.
Fixes: ce76de9846 ("ARM: dts: rockchip: convert rk3288 to operating-points-v2")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A DDC I2C bus specifier is required for DDC EDID probing to work
properly.
Fixes: 1b5715c602 ("arm64: dts: rockchip: add ROCK Pi 4 DTS support")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3328-roc-cc board exhibits tx stability issues with large packets,
as does the rock64 board, which was fixed with this patch
https://patchwork.kernel.org/patch/10178969/
A similar patch was merged for the rk3328-roc-cc here
https://patchwork.kernel.org/patch/10804863/
but it doesn't include the tx/rx_delay tweaks, and I find that they
help with an issue where large transfers would bring the ethernet
link down, causing a link reset regularly.
Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When switching from speakup_soft to another synth, speakup_soft would
keep calling synth_buffer_getc() from softsynthx_read.
Let's thus make synth.c export the knowledge of the current synth, so
that speakup_soft can determine whether it should be running.
speakup_soft also needs to set itself alive, otherwise the switch would
let it remain silent.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building without CONFIG_OF, the compiler loses track of the flow
control in axis_fifo_probe(), and thinks that many variables are used
without an initialization even though we actually leave the function
before the first use:
drivers/staging/axis-fifo/axis-fifo.c: In function 'axis_fifo_probe':
drivers/staging/axis-fifo/axis-fifo.c:900:5: error: 'rxd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (rxd_tdata_width != 32) {
^
drivers/staging/axis-fifo/axis-fifo.c:907:5: error: 'txd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (txd_tdata_width != 32) {
^
drivers/staging/axis-fifo/axis-fifo.c:914:5: error: 'has_tdest' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (has_tdest) {
^
drivers/staging/axis-fifo/axis-fifo.c:919:5: error: 'has_tid' may be used uninitialized in this function [-Werror=maybe-uninitialized]
When CONFIG_OF is set, this does not happen, and since the driver cannot
work without it, just add that option as a Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc noticed a mismatch between the type qualifiers after a recent
cleanup:
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c: In function 'dcon_init_xo_1':
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c:48:26: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
Add the 'const' keyword that should have been there all along.
Fixes: 2159fb3729 ("staging: olpc_dcon: olpc_dcon_xo_1.c: Switch to the gpio descriptor interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`ni_cdio_cmdtest()` validates Comedi asynchronous commands for the DIO
subdevice (subdevice 2) of supported National Instruments M-series
cards. It is called when handling the `COMEDI_CMD` and `COMEDI_CMDTEST`
ioctls for this subdevice. There are two causes for a possible
divide-by-zero error when validating that the `stop_arg` member of the
passed-in command is not too large.
The first cause for the divide-by-zero is that calls to
`comedi_bytes_per_scan()` are only valid once the command has been
copied to `s->async->cmd`, but that copy is only done for the
`COMEDI_CMD` ioctl. For the `COMEDI_CMDTEST` ioctl, it will use
whatever was left there by the previous `COMEDI_CMD` ioctl, if any.
(This is very likely, as it is usual for the application to use
`COMEDI_CMDTEST` before `COMEDI_CMD`.) If there has been no previous,
valid `COMEDI_CMD` for this subdevice, then `comedi_bytes_per_scan()`
will return 0, so the subsequent division in `ni_cdio_cmdtest()` of
`s->async->prealloc_bufsz / comedi_bytes_per_scan(s)` will be a
divide-by-zero error. To fix this error, call a new function
`comedi_bytes_per_scan_cmd(s, cmd)`, based on the existing
`comedi_bytes_per_scan(s)` but using a specified `struct comedi_cmd` for
its calculations. (Also refactor `comedi_bytes_per_scan()` to call the
new function.)
Once the first cause for the divide-by-zero has been fixed, the second
cause is that `comedi_bytes_per_scan_cmd()` can legitimately return 0 if
the `scan_end_arg` member of the `struct comedi_cmd` being tested is 0.
Fix it by only performing the division (and validating that `stop_arg`
is no more than the maximum value) if `comedi_bytes_per_scan_cmd()`
returns a non-zero value.
The problem was reported on the COMEDI mailing list here:
https://groups.google.com/forum/#!topic/comedi_list/4t9WlHzMhKM
Reported-by: Ivan Vasilyev <grabesstimme@gmail.com>
Tested-by: Ivan Vasilyev <grabesstimme@gmail.com>
Fixes: f164cbf98f ("staging: comedi: ni_mio_common: add finite regeneration to dio output")
Cc: <stable@vger.kernel.org> # 4.6+
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
erofs_vmap() wrapped vmap() and vm_map_ram() to return virtual
continuous memory, but both of them can failed due to a lot of
reason, previously, erofs_vmap()'s callers didn't handle them,
which can potentially cause NULL pointer access, fix it.
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Fixes: 0d40d6e399 ("staging: erofs: add a generic z_erofs VLE decompressor")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ethernet in mt7621 is now supported by
drivers/net/ethernet/mediatek/
which provides support for the integrated switch through DSA.
This requires some devicetree changes, and particularly allows
a board dts to identify which switch ports are present.
The second CPU interface - gmac1 - doesn't work yet, so the device
tree information may not be correct. The phy (which is present on the
gnubee-pc2) can negotiate and report connection speed etc, but no
traffic flows.
The gnubee-pc1 has two network ports which are 'black' and 'blue'.
There are connected to switch ports 0 and 4 respectively.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
driver/net/ethernet/mediatek/ now supports this hardware,
so we don't need a separate driver.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are now no in-kernel users of BUS_ATTR() so drop it from device.h
Everyone should use BUS_ATTR_RO/RW/WO() from now on.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We move the check that prevents connecting service ranges to after
the RDM/DGRAM check, and move address sanity control to a separate
function that also validates the service range.
Fixes: 23998835be ("tipc: improve address sanity check in tipc_connect()")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix documentation markup warnings in snmp_counter.rst:
Documentation/networking/snmp_counter.rst:416: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:684: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:693: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:707: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:712: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:722: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:733: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:736: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:739: WARNING: Bullet list ends without a blank line; unexpected unindent.
Fixes: 80cc49507b ("net: Add part of TCP counts explanations in snmp_counters.rst")
Fixes: 8e2ea53a83 ("add snmp counters document")
Fixes: a6c7c7aac2 ("net: add document for several snmp counters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: yupeng <yupeng0921@gmail.com>
that ssize_t is a rudiment of earlier calling conventions; it's been
used only to pass 0 and -E... since last autumn.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
aio_poll() has to cope with several unpleasant problems:
* requests that might stay around indefinitely need to
be made visible for io_cancel(2); that must not be done to
a request already completed, though.
* in cases when ->poll() has placed us on a waitqueue,
wakeup might have happened (and request completed) before ->poll()
returns.
* worse, in some early wakeup cases request might end
up re-added into the queue later - we can't treat "woken up and
currently not in the queue" as "it's not going to stick around
indefinitely"
* ... moreover, ->poll() might have decided not to
put it on any queues to start with, and that needs to be distinguished
from the previous case
* ->poll() might have tried to put us on more than one queue.
Only the first will succeed for aio poll, so we might end up missing
wakeups. OTOH, we might very well notice that only after the
wakeup hits and request gets completed (all before ->poll() gets
around to the second poll_wait()). In that case it's too late to
decide that we have an error.
req->woken was an attempt to deal with that. Unfortunately, it was
broken. What we need to keep track of is not that wakeup has happened -
the thing might come back after that. It's that async reference is
already gone and won't come back, so we can't (and needn't) put the
request on the list of cancellables.
The easiest case is "request hadn't been put on any waitqueues"; we
can tell by seeing NULL apt.head, and in that case there won't be
anything async. We should either complete the request ourselves
(if vfs_poll() reports anything of interest) or return an error.
In all other cases we get exclusion with wakeups by grabbing the
queue lock.
If request is currently on queue and we have something interesting
from vfs_poll(), we can steal it and complete the request ourselves.
If it's on queue and vfs_poll() has not reported anything interesting,
we either put it on the cancellable list, or, if we know that it
hadn't been put on all queues ->poll() wanted it on, we steal it and
return an error.
If it's _not_ on queue, it's either been already dealt with (in which
case we do nothing), or there's aio_poll_complete_work() about to be
executed. In that case we either put it on the cancellable list,
or, if we know it hadn't been put on all queues ->poll() wanted it on,
simulate what cancel would've done.
It's a lot more convoluted than I'd like it to be. Single-consumer APIs
suck, and unfortunately aio is not an exception...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of having aio_complete() set ->ki_res.{res,res2}, do that
explicitly in its callers, drop the reference (as aio_complete()
used to do) and delay the rest until the final iocb_put().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
aio_poll() is not the only case that needs file pinned; worse, while
aio_read()/aio_write() can live without pinning iocb itself, the
proof is rather brittle and can easily break on later changes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is a panic reported that on a system with x722 ethernet, when doing
the operations like:
# ip link add br0 type bridge
# ip link set eno1 master br0
# systemctl restart systemd-networkd
The system will panic "BUG: unable to handle kernel null pointer
dereference at 0000000000000034", with call chain:
i40iw_inetaddr_event
notifier_call_chain
blocking_notifier_call_chain
notifier_call_chain
__inet_del_ifa
inet_rtm_deladdr
rtnetlink_rcv_msg
netlink_rcv_skb
rtnetlink_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
__sys_sendto
It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while
the in->ifa_list is NULL.
So add a check for the "in->ifa_list == NULL" case, and skip the ARP
operation accordingly.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add mapping of link mode: CAUI4 100Gbps CR4/KR4 with 4 lines and 25Gbps.
Fix mapping of link mode: GAUI2 50Gbps CR2/KR2 to be 2 lines with 25Gbps.
Fixes: 08e8676f16 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To prevent a hardware memory leak when a DEVX DCT object is destroyed
without calling DRAIN DCT before, (e.g. under cleanup flow), need to
manage its creation and destruction via mlx5 core.
In that case the DRAIN DCT command will be called and only once that it
will be completed the DESTROY DCT command will be called. Otherwise, the
DESTROY DCT may fail and a hardware leak may occur.
As of that change the DRAIN DCT command should not be exposed any more
from DEVX, it's managed internally by the driver to work as expected by
the device specification.
Fixes: 7efce3691d ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case the DCT creation command has succeeded a DRAIN must be issued
before calling DESTROY.
In addition, the original code used the wrong parameter for the DESTROY
command, 'in' instead of 'din', which caused another creation try instead
of destroying.
Cc: <stable@vger.kernel.org> # 4.15
Fixes: 57cda166bb ("net/mlx5: Add DCT command interface")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Code review revealed a race condition which could allow the catas error
flow to interrupt the alias guid query post mechanism at random points.
Thiis is fixed by doing cancel_delayed_work_sync() instead of
cancel_delayed_work() during the alias guid mechanism destroy flow.
Fixes: a0c64a17ab ("mlx4: Add alias_guid mechanism")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When Daniel removed struct_mutex he didn't fix this call to the unlocked
variant which is required since we no longer use struct mutex.
This fixes a bunch of:
WARNING: CPU: 4 PID: 1370 at drivers/gpu/drm/drm_gem.c:931 drm_gem_object_put+0x2b/0x30 [drm]
Modules linked in: udl xt_CHECKSUM ipt_MASQUERADE tun bridge stp llc nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t>
CPU: 4 PID: 1370 Comm: Xorg Not tainted 5.0.0+ #2
backtraces when you plug in a udl device.
Fixes: ae358dacd2 (drm/udl: Get rid of dev->struct_mutex usage)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We've had rather rare reports of bmap btree block corruption where
the bmap root block has a level count of zero. The root cause of the
corruption is so far unknown. We do have verifier checks to detect
this form of on-disk corruption, but this doesn't cover a memory
corruption variant of the problem. The latter is a reasonable
possibility because the root block is part of the inode fork and can
reside in-core for some time before inode extents are read.
If this occurs, it leads to a system crash such as the following:
BUG: unable to handle kernel paging request at ffffffff00000221
PF error: [normal kernel read fault]
...
RIP: 0010:xfs_trans_brelse+0xf/0x200 [xfs]
...
Call Trace:
xfs_iread_extents+0x379/0x540 [xfs]
xfs_file_iomap_begin_delay+0x11a/0xb40 [xfs]
? xfs_attr_get+0xd1/0x120 [xfs]
? iomap_write_begin.constprop.40+0x2d0/0x2d0
xfs_file_iomap_begin+0x4c4/0x6d0 [xfs]
? __vfs_getxattr+0x53/0x70
? iomap_write_begin.constprop.40+0x2d0/0x2d0
iomap_apply+0x63/0x130
? iomap_write_begin.constprop.40+0x2d0/0x2d0
iomap_file_buffered_write+0x62/0x90
? iomap_write_begin.constprop.40+0x2d0/0x2d0
xfs_file_buffered_aio_write+0xe4/0x3b0 [xfs]
__vfs_write+0x150/0x1b0
vfs_write+0xba/0x1c0
ksys_pwrite64+0x64/0xa0
do_syscall_64+0x5a/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The crash occurs because xfs_iread_extents() attempts to release an
uninitialized buffer pointer as the level == 0 value prevented the
buffer from ever being allocated or read. Change the level > 0
assert to an explicit error check in xfs_iread_extents() to avoid
crashing the kernel in the event of localized, in-core inode
corruption.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull more Kbuild updates from Masahiro Yamada:
- add more Build-Depends to Debian source package
- prefix header search paths with $(srctree)/
- make modpost show verbose section mismatch warnings
- avoid hard-coded CROSS_COMPILE for h8300
- fix regression for Debian make-kpkg command
- add semantic patch to detect missing put_device()
- fix some warnings of 'make deb-pkg'
- optimize NOSTDINC_FLAGS evaluation
- add warnings about redundant generic-y
- clean up Makefiles and scripts
* tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove stale lxdialog/.gitignore
kbuild: force all architectures except um to include mandatory-y
kbuild: warn redundant generic-y
Revert "modsign: Abort modules_install when signing fails"
kbuild: Make NOSTDINC_FLAGS a simply expanded variable
kbuild: deb-pkg: avoid implicit effects
coccinelle: semantic code search for missing put_device()
kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG
kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb
kbuild: deb-pkg: add CONFIG_ prefix to kernel config options
kbuild: add workaround for Debian make-kpkg
kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG}
unicore32: simplify linker script generation for decompressor
h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-
kbuild: move archive command to scripts/Makefile.lib
modpost: always show verbose warning for section mismatch
ia64: prefix header search path with $(srctree)/
libfdt: prefix header search paths with $(srctree)/
deb-pkg: generate correct build dependencies
Pull x86 asm updates from Thomas Gleixner:
"Two cleanup patches removing dead conditionals and unused code"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove unused __constant_c_x_memset() macro and inlines
x86/asm: Remove dead __GNUC__ conditionals
