This fixes two different classes of bugs in the Intel graphics hardware:
MMIO register read hang:
"On Intels Gen8 and Gen9 Graphics hardware, a read of specific graphics
MMIO registers when the product is in certain low power states causes
a system hang.
There are two potential triggers for DoS:
a) H/W corruption of the RC6 save/restore vector
b) Hard hang within the MIPI hardware
This prevents the DoS in two areas of the hardware:
1) Detect corruption of RC6 address on exit from low-power state,
and if we find it corrupted, disable RC6 and RPM
2) Permanently lower the MIPI MMIO timeout"
Blitter command streamer unrestricted memory accesses:
"On Intels Gen9 Graphics hardware the Blitter Command Streamer (BCS)
allows writing to Memory Mapped Input Output (MMIO) that should be
blocked. With modifications of page tables, this can lead to privilege
escalation. This exposure is limited to the Guest Physical Address
space and does not allow for access outside of the graphics virtual
machine.
This series establishes a software parser into the Blitter command
stream to scan for, and prevent, reads or writes to MMIO's that should
not be accessible to non-privileged contexts.
Much of the command parser infrastructure has existed for some time,
and is used on Ivybridge/Haswell/Valleyview derived products to allow
the use of features normally blocked by hardware. In this legacy
context, the command parser is employed to allow normally unprivileged
submissions to be run with elevated privileges in order to grant
access to a limited set of extra capabilities. In this mode the parser
is optional; In the event that the parser finds any construct that it
cannot properly validate (e.g. nested command buffers), it simply
aborts the scan and submits the buffer in non-privileged mode.
For Gen9 Graphics, this series makes the parser mandatory for all
Blitter submissions. The incoming user buffer is first copied to a
kernel owned buffer, and parsed. If all checks are successful the
kernel owned buffer is mapped READ-ONLY and submitted on behalf of the
user. If any checks fail, or the parser is unable to complete the scan
(nested buffers), it is forcibly rejected. The successfully scanned
buffer is executed with NORMAL user privileges (key difference from
legacy usage).
Modern usermode does not use the Blitter on later hardware, having
switched over to using the 3D engine instead for performance reasons.
There are however some legacy usermode apps that rely on Blitter,
notably the SNA X-Server. There are no known usermode applications
that require nested command buffers on the Blitter, so the forcible
rejection of such buffers in this patch series is considered an
acceptable limitation"
* Intel graphics fixes in emailed bundle from Jon Bloomfield <jon.bloomfield@intel.com>:
drm/i915/cmdparser: Fix jump whitelist clearing
drm/i915/gen8+: Add RC6 CTX corruption WA
drm/i915: Lower RM timeout to avoid DSI hard hangs
drm/i915/cmdparser: Ignore Length operands during command matching
drm/i915/cmdparser: Add support for backward jumps
drm/i915/cmdparser: Use explicit goto for error paths
drm/i915: Add gen9 BCS cmdparsing
drm/i915: Allow parsing of unsized batches
drm/i915: Support ro ppgtt mapped cmdparser shadow buffers
drm/i915: Add support for mandatory cmdparsing
drm/i915: Remove Master tables from cmdparser
drm/i915: Disable Secure Batches for gen6+
drm/i915: Rename gen7 cmdparser tables
[Why]
On Navi10, and presumably arcterus, updating pp_table via sysfs would
not re-scale the maximum possible power limit one can set. On navi10,
the SMU code ignored the power percentage overdrive setting entirely,
and would not allow you to exceed the default power limit at all.
[How]
Adding a function to the SMU interface to get the pptable version of the
default power limit allows ASIC-specific code to provide the correct
maximum-settable power limit for the current pptable.
v3: fix spelling (Alex)
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before this patch, navi10 overdrive settings could not be printed via
pp_od_clk_voltage
[How]
Implement printing for the overdrive settings for the following clocks
in navi10's ppt print_clk_levels implementation:
* SMU_OD_SCLK
* SMU_OD_MCLK
* SMU_OD_VDDC_CURVE
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before this patch, there was no way to set the gfxclk voltage curve in
the overdrive settings for navi10 through pp_od_clk_voltage
[How]
Add the required implementation to navi10's ppt dpm table editing
implementation, similar to the vega20 implementation and interface.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Before this patch, there was no way to use pp_od_clk_voltage on navi
[How]
Similar to the vega20 implementation, but using the common smc_v11_0
headers, implemented the pp_od_clk_voltage API for navi10's pptable
implementation
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the formatting on one comment and consolidates the
pci_get_drvdata() into the radeon_suspend_kms().
Signed-off-by: Kyle Mahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi, ras, hdcp and dtm ta are actually separated ucode and
need to handled case by case to upload to psp.
We support the case that ta binary have one or multiple of
them built-in. As a result, the driver should check each ta
binariy's availablity before decide to upload them to psp.
In the terminate (unload) case, the driver will check the
context readiness before perform unload activity. It's fine
to keep it as is.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a jump_whitelist bitmap is reused, it needs to be cleared.
Currently this is done with memset() and the size calculation assumes
bitmaps are made of 32-bit words, not longs. So on 64-bit
architectures, only the first half of the bitmap is cleared.
If some whitelist bits are carried over between successive batches
submitted on the same context, this will presumably allow embedding
the rogue instructions that we're trying to reject.
Use bitmap_zero() instead, which gets the calculation right.
Fixes: f8c08d8fae ("drm/i915/cmdparser: Add support for backward jumps")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3c ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2fd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This is to improve the performance in the compute mode
for vega10. For example, the original performance for a rocm
bandwidth test: 2G internal GPU copy, is about 99GB/s.
With the idle power features disabled dynamically, the porformance
is promoted to about 215GB/s.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will cause modprobe atombios stuck problem in raven2 if it doesn't
allow direct upload save restore list from gfx driver.
So it needs to allow direct upload save restore list for raven2
temporarily.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The region of pvinfo is reserved for communication between a VMM and
the GPU driver executing on a virtual machine. HW doesn't have any
backing mmio store support for the pvinfo region, thus accessing to
this range through MMIO read/write from host side is forbidden which
is regarded as unclaimed register access.
This patch leaves pvinfo range be initialized with zero.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The reference count of obj will be decremented twice if error occurs
in dma_buf_fd(). Additionally, attempting to read the reference count of
obj after dropping reference may lead to a use after free bug. Here, we
drop obj's reference until it is not used.
Fixes: e546e281d3 ("drm/i915/gvt: Dmabuf support for GVT-g")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Problem:
During GPU reset we call the GPU scheduler to suspend it's
thread, those two functions in amdgpu also suspend and resume
the sceduler for their needs but this can collide with GPU
reset in progress and accidently restart a suspended thread
before time.
Fix:
Serialize with GPU reset.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removes thread park/unpark hack from drm_sched_entity_fini and
by this fixes reactivation of scheduler thread while the thread
is supposed to be stopped.
v2: Per sched entity completion.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the asic callback function of get_pcie_replay_count is not implement on navi asic,
it will cause null pinter error when read this interface.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Explain fields like aper_base, agp_start etc. The definition
of those fields are confusing as they are from different view
(CPU or GPU). Add comments for easier understand.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <Alex.Deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to add warning to update firmware in gfx9
in case that firmware is too old to have function to
realize dummy read in cp firmware.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface. This has caused a problem where
status registers requiring HW to update have a 1 cycle delay, due
to the register update having to go through GRBM.
For cp ucode, it has realized dummy read in cp firmware.It covers
the use of WAIT_REG_MEM operation 1 case only.So it needs to call
gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to
update firmware in case firmware is too old to have function to realize
dummy read in cp firmware.
For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is
moved to gfxhub in gfx10. So it needs to add dummy read in driver
between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error
on vega20 and navi asic.
fix commit:
drm/amd/powerplay: add function get_workload_type_map for swsmu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clarify some areas, clean up formatting, add section for
unrecoverable error handling.
v2: fix grammatical errors
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to set the dte flag on this asic.
Port the fix from amdgpu:
5cb818b861 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reference to object fence is dropped at the end of the loop.
However, it is dropped again outside the loop. The reference can be
dropped immediately after calling dma_fence_wait() in the loop and
thus the dropping operation outside the loop can be removed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to add warning to update firmware in gfx9
in case that firmware is too old to have function to
realize dummy read in cp firmware.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
