The conntrack label extension is currently variable-sized, e.g. if
only 2 labels are used by iptables rules then the labels->bits[] array
will only contain one element.
We track size of each label storage area in the 'words' member.
But in nftables and openvswitch we always have to ask for worst-case
since we don't know what bit will be used at configuration time.
As most arches are 64bit we need to allocate 24 bytes in this case:
struct nf_conn_labels {
u8 words; /* 0 1 */
/* XXX 7 bytes hole, try to pack */
long unsigned bits[2]; /* 8 24 */
Make bits a fixed size and drop the words member, it simplifies
the code and only increases memory requirements on x86 when
less than 64bit labels are required.
We still only allocate the extension if its needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The iProc GPIO controller is shared among multiple iProc based SoCs.
In the NSP integration, the drive strength pinctrl function is
disabled. In the integration of Stingray, pinctrl is handled by another
block and this GPIO controller is solely used as a GPIO controller, and
therefore should not be registered to the pinconf framework
This patch introduces new SoC specific compatible strings
"brcm,iproc-nsp-gpio" for NSP with drive strength feature disabled and
"brcm,iproc-stingray-gpio" for Stingray with all PINCONF features
disabled
This patch is developed based on the initial work from Yendapally
Reddy Dhananjaya <yendapally.reddy@broadcom.com> who attempted to
disable drive strength configuration for the iProc based NSP chip. In
addition, Pramod Kumar <pramod.kumar@broadcom.com> also contributed to
make the support more generic across all currently supported PINCONF
functions in the iProc GPIO/PINCONF driver
Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the iProc GPIO binding document to add new compatible strings
"brcm,iproc-nsp-gpio" and "brcm,iproc-stingray-gpio" to support the
iProc based GPIO controller used in the NSP and Stingray SoCs,
respectively
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Building without CONFIG_OF gives us these warnings for the broadcom
pinctrl drivers:
drivers/pinctrl/bcm/pinctrl-nsp-mux.c:356:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function)
drivers/pinctrl/bcm/pinctrl-cygnus-mux.c:739:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function)
The function is only available when CONFIG_OF is set, so we should add
a Kconfig dependency for both drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: cc4fa83f66 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
fwnode_handle_put() should be used when terminating
device_for_each_child_node() iteration with break or
return to prevent stale device node references from
being left behind.
Generated by Coccinelle.
Fixes: 4ba8cfa79f ("gpio: dwapb: convert device node to fwnode")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is a potential race when two threads do the writes to the same register
in parallel.
Prevent out of order in such case by protecting I/O access by spin lock.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Intel Merrifield platform has a special GPIO controller to
drive pads when they are muxed in corresponding mode.
Intel Merrifield GPIO IP is slightly different here and there
in comparison to the older Intel MID platforms. These differences
include in particular the shaked register offsets, specific
support of level triggered interrupts and wake capable sources,
as well as a pinctrl which is a separate IP.
Instead of uglifying existing driver I decide to provide a new
one slightly based on gpio-intel-mid.c. So, anyone can easily
compare what changes are happened to be here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Brian J Wood <brian.j.wood@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO controller is a part of Intel MID platforms which are somehow
different to pure PCs. Thus, there is no need that driver is compiled for them.
Replace dependency to X86_INTEL_MID.
While here, fix capitalization of MID abbreviation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit d56d6b3d7d ("gpio: langwell: add Intel Merrifield support")
doesn't look at all as a proper support for Intel Merrifield and I dare to say
that it distorts the behaviour of the hardware.
The register map is different on Intel Merrifield, i.e. only 6 out of 8
register have the same purpose but none of them has same location in the
address space. The current case potentially harmful to existing hardware since
it's poking registers on wrong offsets and may set some pin to be GPIO output
when connected hardware doesn't expect such.
Besides the above GPIO and pinctrl on Intel Merrifield have been located in
different IP blocks. The functionality has been extended as well, i.e. added
support of level interrupts, special registers for wake capable sources and
thus, in my opinion, requires a completele separate driver.
If someone wondering the existing gpio-intel-mid.c would be converted to actual
pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do
that.
Fixes: d56d6b3d7d ("gpio: langwell: add Intel Merrifield support")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I stumbled over a build error with COMPILE_TEST and CONFIG_OF
disabled:
drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe':
drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node'
The problem is that the newly added GPIO_TEGRA Kconfig symbol
does not have a dependency on CONFIG_OF. However, there is another
problem here as the driver gets enabled unconditionally whenever
COMPILE_TEST is set.
This fixes both problems, by making the symbol user-visible
when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y.
As a side-effect, it is now possible to compile-test a Tegra
kernel with GPIO support disabled, which is harmless.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4dd4dd1d21 ("gpio: tegra: Allow compile test")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently, osd_weight and osd_state fields are updated in the encoding
order. This is wrong, because an incremental map may look like e.g.
new_up_client: { osd=6, addr=... } # set osd_state and addr
new_state: { osd=6, xorstate=EXISTS } # clear osd_state
Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After
applying new_up_client, osd_state is changed to EXISTS | UP. Carrying
on with the new_state update, we flip EXISTS and leave osd6 in a weird
"!EXISTS but UP" state. A non-existent OSD is considered down by the
mapping code
2087 for (i = 0; i < pg->pg_temp.len; i++) {
2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) {
2089 if (ceph_can_shift_osds(pi))
2090 continue;
2091
2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE;
and so requests get directed to the second OSD in the set instead of
the first, resulting in OSD-side errors like:
[WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680
and hung rbds on the client:
[ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0)
[ 493.566805] rbd: rbd0: result -6 xferred 400000
[ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688
The fix is to decouple application from the decoding and:
- apply new_weight first
- apply new_state before new_up_client
- twiddle osd_state flags if marking in
- clear out some of the state if osd is destroyed
Fixes: http://tracker.ceph.com/issues/14901
Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc: libceph: set 'exists' flag for newly up osd
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
... for single items being collected: It is more typesafe (as the
compiler can check format string and to-be-written-to variable match)
and requires one less parameter to be passed.
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
... for single items being collected: It is more typesafe (as the
compiler can check format string and to-be-written-to variable match)
and requires one less parameter to be passed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
bin2c is used to create a valid C file out of a binary file where two
symbols will be globally defined: <name> and <name>_size. <name> is
passed as the first parameter of the host binary.
Building using goto-cc reported that the purgatory binary code (the only
current user of this utility) declares kexec_purgatory_size as 'size_t'
where bin2c generate <name>_size to be 'int' so in a 64-bit host where
sizeof(size_t) > sizeof(int) this type mismatch will always yield the
wrong value for big-endian architectures while for little-endian it will
be wrong if the object laid in memory directly after
kexec_purgatory_size contains non-zero value at the time of reading.
This commit changes <name>_size to be size_t instead.
Note:
Another way to fix the problem is to change the type of
kexec_purgatory_size to be 'int' as there's this check in code:
(kexec_purgatory_size <= 0)
Signed-off-by: Michael Tautschnig <tautschn@amazon.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Olof's build test setup keeps failing to compile arm64 kernels
because of a toolchain that uses outdated kernel headers:
/work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory
This is of course something he could change, but it also indicates
that others may run into the same problem. Running 'make headers_install'
avoids the issue by ensuring that the kernel headers are put into
the $(objdir)/usr/include path before we build the samples.
The same problem happened for the Documentation build in the
past and was fixed up with commit 8e2faea877 ("Make Documenation
depend on headers_install"). This adds an identical Makefile dependency
for the samples/ subdirectory.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
test_resume mode is to verify if the snapshot data
written to swap device can be successfully restored
to memory. It is useful to ease the debugging process
on hibernation, since this mode can not only bypass
the BIOSes/bootloader, but also the system re-initialization.
To avoid the risk to break the filesystm on persistent storage,
this patch resumes the image with tasks frozen.
For example:
echo test_resume > /sys/power/disk
echo disk > /sys/power/state
[ 187.306470] PM: Image saving progress: 70%
[ 187.395298] PM: Image saving progress: 80%
[ 187.476697] PM: Image saving progress: 90%
[ 187.554641] PM: Image saving done.
[ 187.558896] PM: Wrote 594600 kbytes in 0.90 seconds (660.66 MB/s)
[ 187.566000] PM: S|
[ 187.589742] PM: Basic memory bitmaps freed
[ 187.594694] PM: Checking hibernation image
[ 187.599865] PM: Image signature found, resuming
[ 187.605209] PM: Loading hibernation image.
[ 187.665753] PM: Basic memory bitmaps created
[ 187.691397] PM: Using 3 thread(s) for decompression.
[ 187.691397] PM: Loading and decompressing image data (148650 pages)...
[ 187.889719] PM: Image loading progress: 0%
[ 188.100452] PM: Image loading progress: 10%
[ 188.244781] PM: Image loading progress: 20%
[ 189.057305] PM: Image loading done.
[ 189.068793] PM: Image successfully loaded
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make use of the new Requires: tag to be able to specify coccinelle binary
version requirements. The cocci file device_node_continue.cocci requires at
least coccinelle 1.0.4.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
Refer to the Documentation/coccinelle.txt and supplemental documentation
on the wiki:
https://bottest.wiki.kernel.org/coccicheck
This page shall always refer to the linux-next iteration of scripts/coccicheck.
v4: only refer to the wiki as supplemental documentation, and also
update Documentation/coccinelle.txt.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
Enable Coccinelle SmPL patches to require a specific version of
Coccinelle. In the event that the version does not match we just
inform the user, if the user asked to go through all SmPL patches
we just inform them of the need for a new version of coccinelle for
the SmPL patch and continue on with the rest.
This uses the simple kernel scripts/ld-version.sh to create a weight
on the version provided by spatch. The -dirty attribute is ignored if
supplied, the benefit of scripts/ld-version.sh is it has a long history
and well tested.
While at it, document the // Options stuff as well.
v4: Document // Options and // Requires as well on
Documentation/coccinelle.txt.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
Coccinelle supports reading .cocciconfig, the order of precedence for
variables for .cocciconfig is as follows:
o Your current user's home directory is processed first
o Your directory from which spatch is called is processed next
o The directory provided with the --dir option is processed last, if used
Since coccicheck runs through make, it naturally runs from the kernel
proper dir, as such the second rule above would be implied for picking up a
.cocciconfig when using 'make coccicheck'.
'make coccicheck' also supports using M= targets.If you do not supply
any M= target, it is assumed you want to target the entire kernel.
The kernel coccicheck script has:
if [ "$KBUILD_EXTMOD" = "" ] ; then
OPTIONS="--dir $srctree $COCCIINCLUDE"
else
OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
fi
KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
the spatch --dir argument is used, as such third rule applies when
whether M= is used or not, and when M= is used the target directory can
have its own .cocciconfig file. When M= is not passed as an argument to
coccicheck the target directory is the same as the directory from where
spatch was called.
If not using the kernel's coccicheck target, keep the above precedence order
logic of .cocciconfig reading. If using the kernel's coccicheck target,
override any of the kernel's .coccicheck's settings using SPFLAGS.
We help Coccinelle when used against Linux with a set of sensible defaults
options for Linux with our own Linux .cocciconfig. This hints to coccinelle
git can be used for 'git grep' queries over coccigrep. A timeout of 200
seconds should suffice for now.
The options picked up by coccinelle when reading a .cocciconfig do not appear
as arguments to spatch processes running on your system, to confirm what
options will be used by Coccinelle run:
spatch --print-options-only
You can override with your own preferred index option by using SPFLAGS.
Coccinelle supports both glimpse and idutils. Glimpse had historically
provided the best performance, however recent benchmarks reveal idutils
is performing just as well. Due to some recent fixes however you however
will need at least coccinelle >= 1.0.6 if using idutils.
Coccinelle carries a script scripts/idutils_index.sh which creates the
idutils database with as follows:
mkid -i C --output .id-utils.index
If using just "--use-idutils" coccinelle expects your idutils database to be
on the top level of the kernel as a file named ".id-utils.index". If you do
not use this you can symlink your database file to it, or you can specify the
database file following the "--use-idutils" argument. Examples:
make SPFLAGS=--use-idutils coccicheck
This assumes you have $srctree/.id-utils.index, where $srctree is
the top level of the kernel.
make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
Here you specify the full path of the idutils ID database. Using
.cocciconfig is possible, however given the order of precedence followed
by Coccinelle, and since the kernel now carries its own .cocciconfig,
you will need to use SPFLAGS to use idutils if desired.
v4:
o Recommend upgrade for using idutils with coccinelle due to some
recent fixes.
o Refer to using --print-options-only for testing what options are
picked up by .cocciconfig reading.
o Expand commit log considerably explaining *why* .cocconfig from
two precedence rules are used when using coccicheck, and how to
properly override these if needed.
o Expand Documentation/coccinelle.txt
v3: Expand commit log a bit more
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
When debugging (using --profile or --show-trying) you want to
avoid supressing output, use --quiet instead. While at it, extend
documentation for SPFLAGS use.
For instance one can use:
$ export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
$ make coccicheck DEBUG_FILE="poo.err" MODE=report SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c
Expand Documentation/coccinelle.txt as well.
v4: expand Documentation/coccinelle.txt
v3: rebased, resolve conflicts, expand Documentation/coccinelle.txt
v2: use egrep instead of the *"=--option"* check, this doesn't work for
disjunctions.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
Enable to capture stderr via a DEBUG_FILE variable passed to
coccicheck. You can now do:
$ rm -f cocci.err
$ export COCCI=scripts/coccinelle/free/kfree.cocci
$ make coccicheck MODE=report DEBUG_FILE=cocci.err
...
$ cat cocci.err
This will be come more useful once we add support to
use more things which would go into stderr, such as
profiling. That will be done separately in another
commit.
Expand Documentation/coccinelle.txt with details.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
Coccinelle has had parmap support since 1.0.2, this means
it supports --jobs, enabling built-in multithreaded functionality,
instead of needing one to script it out. Just look for --jobs
in the help output to determine if this is supported and use it
only if your number of processors detected is > 1.
If parmap is enabled also enable the load balancing to be dynamic, so
that if a thread finishes early we keep feeding it.
stderr is currently sent to /dev/null, addressing a way to capture
that will be addressed next.
If --jobs is not supported we fallback to the old mechanism.
We expect to deprecate the old mechanism as soon as we can get
confirmation all users are ready.
While at it propagate back into the shell script any coccinelle error
code. When used in serialized mode where all cocci files are run this
also stops processing if an error has occured. This lets us handle some
errors in coccinelle cocci files and if they bail out we should inspect
the errors. This will be more useful later to help annotate coccinelle
version dependency requirements. This will let you run only SmPL files
that your system supports.
Extend Documentation/coccinelle.txt as well.
As a small example, prior to this change, on an 8-core system:
Before:
$ export COCCI=scripts/coccinelle/free/kfree.cocci
$ time make coccicheck MODE=report
...
real 29m14.912s
user 103m1.796s
sys 0m4.464s
After:
real 16m22.435s
user 128m30.060s
sys 0m2.712s
v4:
o expand Documentation/coccinelle.txt to reflect parmap support info
o update commit log to reflect what we actually do now with stderr
o split out DEBUG_FILE use into another patch
o detect number of CPUs and if its 1 then skip parmap support,
note that if you still support parmap, but have 1 CPU you will
also go through the new branches, so the old complex multithreaded process
is skipped as well.
v3:
o move USE_JOBS to avoid being overriden
v2:
o redirect coccinelle stderr to /dev/null by default and
only if DEBUG_FILE is used do we pass it to a file
o fix typo of paramap/parmap
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
SPFLAGS is set early, it means that any heuristics done on
coccicheck cannot be overridden currently. Move SPFLAGS
after OPTIONS and set this at the end. This lets you override
any heuristics as coccinelle treats conflicts by only listening
to the last option that makes sense.
v3: this patch was added in the v3 series
v4: Update Documentation/coccinelle.txt explaining how
SPFLAGS works as well.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
This has no functional changes. This is being done
to enable us to later use spatch binary for some
flag checking for certain features early on.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
This patch address a few issues with the initial crosstalk fix. Most
important of which is the SDP that indicates the presents of a SFP+
module changes between HW types. With this change that is taken in
to consideration
It also moves the check closer to the base code that checks link. This
makes it so we only need to do the check in one spot.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
With changes to ixgbevf_write_msg_read_ack(), other functions are
performing the same operations done here; change those functions to
utilize ixgbevf_write_msg_read_ack().
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The upper dentry may become stale before we call ovl_lock_rename_workdir.
For example, someone could (mistakenly or maliciously) manually unlink(2)
it directly from upperdir.
To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir
and and check if it matches the upper dentry.
Essentially, it is the same problem and similar solution as in
commit 11f3710417 ("ovl: verify upper dentry before unlink and rename").
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Currently when setting the VF's MTU, the PF can return a NACK but this
isn't passed on to the VF. Propagate the results from the PF to the VF
so errors can be reported.
In ixgbevf_change_mtu, return an error and reject the change.
For ixgbevf_configure_rx, log the error for debugging purposes since
the function is buried in a series of Rx config routines that are void.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The function ixgbevf_reinit_locked() assumes you have the rtnl lock
however we didn't when calling from the service task. This patch
corrects that.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
