This is to support the snps,dwmac-4.00 and snps,dwmac-4.10a
and related features on the platform driver.
See binding doc for further details.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull configfs fix from Christoph Hellwig:
"A trivial fix to the recently introduced binary attribute helper
macros"
* tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfs:
configfs: fix CONFIGFS_BIN_ATTR_[RW]O definitions
Pull networking fixes from David Miller:
1) Missing device reference in IPSEC input path results in crashes
during device unregistration. From Subash Abhinov Kasiviswanathan.
2) Per-queue ISR register writes not being done properly in macb
driver, from Cyrille Pitchen.
3) Stats accounting bugs in bcmgenet, from Patri Gynther.
4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from
Quentin Armitage.
5) SXGBE driver has off-by-one in probe error paths, from Rasmus
Villemoes.
6) Fix race in save/swap/delete options in netfilter ipset, from
Vishwanath Pai.
7) Ageing time of bridge not set properly when not operating over a
switchdev device. Fix from Haishuang Yan.
8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander
Duyck.
9) IPV6 UDP code bumps wrong stats, from Eric Dumazet.
10) FEC driver should only access registers that actually exist on the
given chipset, fix from Fabio Estevam.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
net: mvneta: fix changing MTU when using per-cpu processing
stmmac: fix MDIO settings
Revert "stmmac: Fix 'eth0: No PHY found' regression"
stmmac: fix TX normal DESC
net: mvneta: use cache_line_size() to get cacheline size
net: mvpp2: use cache_line_size() to get cacheline size
net: mvpp2: fix maybe-uninitialized warning
tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card
rtnl: fix msg size calculation in if_nlmsg_size()
fec: Do not access unexisting register in Coldfire
net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: dsa: mv88e6xxx: Clear the PDOWN bit on setup
net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write}
bpf: make padding in bpf_tunnel_key explicit
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
bnxt_en: Fix ethtool -a reporting.
bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().
bnxt_en: Implement proper firmware message padding.
...
Modify the ACPI cpufreq driver to provide a method for switching
CPU frequencies from interrupt context and update the cpufreq core
to support that method if available.
Introduce a new cpufreq driver callback, ->fast_switch, to be
invoked for frequency switching from interrupt context by (future)
governors supporting that feature via (new) helper function
cpufreq_driver_fast_switch().
Add two new policy flags, fast_switch_possible, to be set by the
cpufreq driver if fast frequency switching can be used for the
given policy and fast_switch_enabled, to be set by the governor
if it is going to use fast frequency switching for the given
policy. Also add a helper for setting the latter.
Since fast frequency switching is inherently incompatible with
cpufreq transition notifiers, make it possible to set the
fast_switch_enabled only if there are no transition notifiers
already registered and make the registration of new transition
notifiers fail if fast_switch_enabled is set for at least one
policy.
Implement the ->fast_switch callback in the ACPI cpufreq driver
and make it set fast_switch_possible during policy initialization
as appropriate.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Move definitions of symbols related to transition latency and
sampling rate to include/linux/cpufreq.h so they can be used by
(future) goverernors located outside of drivers/cpufreq/.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Move definitions and function headers related to struct gov_attr_set
to include/linux/cpufreq.h so they can be used by (future) goverernors
located outside of drivers/cpufreq/.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Replace the single helper for adding and removing cpufreq utilization
update hooks, cpufreq_set_update_util_data(), with a pair of helpers,
cpufreq_add_update_util_hook() and cpufreq_remove_update_util_hook(),
and modify the users of cpufreq_set_update_util_data() accordingly.
With the new helpers, the code using them doesn't need to worry
about the internals of struct update_util_data and in particular
it doesn't need to worry about populating the func field in it
properly upfront.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Initially the phy_bus_name was added to manipulate the
driver name but it was recently just used to manage the
fixed-link and then to take some decision at run-time.
So the patch uses the is_pseudo_fixed_link and removes
the phy_bus_name variable not necessary anymore.
The driver can manage the mdio registration by using phy-handle,
dwmac-mdio and own parameter e.g. snps,phy-addr.
This patch takes care about all these possible configurations
and fixes the mdio registration in case of there is a real
transceiver or a switch (that needs to be managed by using
fixed-link).
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Phil Reid <preid@electromag.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin reported a suspicious rcu_dereference_protected() warning
found while fuzzing with trinity that is similar to this one:
[ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage!
[ 52.765688] other info that might help us debug this:
[ 52.765695] rcu_scheduler_active = 1, debug_locks = 1
[ 52.765701] 1 lock held by a.out/1525:
[ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20
[ 52.765721] stack backtrace:
[ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264
[...]
[ 52.765768] Call Trace:
[ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8
[ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110
[ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90
[ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun]
[ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun]
[ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210
[ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun]
[ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690
[ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60
[ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90
[ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140
[ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25
Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled
from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH,
DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices.
Since the fix in f91ff5b9ff ("net: sk_{detach|attach}_filter() rcu
fixes") sk_attach_filter()/sk_detach_filter() now dereferences the
filter with rcu_dereference_protected(), checking whether socket lock
is held in control path.
Since its introduction in 9940516259 ("tun: socket filter support"),
tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the
sock_owned_by_user(sk) doesn't apply in this specific case and therefore
triggers the false positive.
Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair
that is used by tap filters and pass in lockdep_rtnl_is_held() for the
rcu_dereference_protected() checks instead.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse module loader code to write relocations, thereby eliminating the need
for architecture specific relocation code in livepatch. Specifically, reuse
the apply_relocate_add() function in the module loader to write relocations
instead of duplicating functionality in livepatch's arch-dependent
klp_write_module_reloc() function.
In order to accomplish this, livepatch modules manage their own relocation
sections (marked with the SHF_RELA_LIVEPATCH section flag) and
livepatch-specific symbols (marked with SHN_LIVEPATCH symbol section
index). To apply livepatch relocation sections, livepatch symbols
referenced by relocs are resolved and then apply_relocate_add() is called
to apply those relocations.
In addition, remove x86 livepatch relocation code and the s390
klp_write_module_reloc() function stub. They are no longer needed since
relocation work has been offloaded to module loader.
Lastly, mark the module as a livepatch module so that the module loader
canappropriately identify and initialize it.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # for s390 changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For livepatch modules, copy Elf section, symbol, and string information
from the load_info struct in the module loader. Persist copies of the
original symbol table and string table.
Livepatch manages its own relocation sections in order to reuse module
loader code to write relocations. Livepatch modules must preserve Elf
information such as section indices in order to apply livepatch relocation
sections using the module loader's apply_relocate_add() function.
In order to apply livepatch relocation sections, livepatch modules must
keep a complete copy of their original symbol table in memory. Normally, a
stripped down copy of a module's symbol table (containing only "core"
symbols) is made available through module->core_symtab. But for livepatch
modules, the symbol table copied into memory on module load must be exactly
the same as the symbol table produced when the patch module was compiled.
This is because the relocations in each livepatch relocation section refer
to their respective symbols with their symbol indices, and the original
symbol indices (and thus the symtab ordering) must be preserved in order
for apply_relocate_add() to find the right symbol.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit provides rcu_exp_batches_completed() and
rcu_exp_batches_completed_sched() functions to allow torture-test modules
to check how many expedited grace period batches have completed.
These are analogous to the existing rcu_batches_completed(),
rcu_batches_completed_bh(), and rcu_batches_completed_sched() functions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, we have four versions of rcu_read_lock_sched_held(), depending
on the combined choices on PREEMPT_COUNT and DEBUG_LOCK_ALLOC. However,
there is an existing function preemptible() that already distinguishes
between the PREEMPT_COUNT=y and PREEMPT_COUNT=n cases, and allows these
four implementations to be consolidated down to two.
This commit therefore uses preemptible() to achieve this consolidation.
Note that there could be a small performance regression in the case
of CONFIG_DEBUG_LOCK_ALLOC=y && PREEMPT_COUNT=n. However, given the
overhead associated with CONFIG_DEBUG_LOCK_ALLOC=y, this should be
down in the noise.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit consolidates a couple definitions and several calls for
single-shot ftrace-buffer dumping.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
acl_by_type(inode, type) returns a pointer to either inode->i_acl or
inode->i_default_acl depending on type. This is useful in
fs/posix_acl.c, but should never have been visible outside that file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When get_acl() is called for an inode whose ACL is not cached yet, the
get_acl inode operation is called to fetch the ACL from the filesystem.
The inode operation is responsible for updating the cached acl with
set_cached_acl(). This is done without locking at the VFS level, so
another task can call set_cached_acl() or forget_cached_acl() before the
get_acl inode operation gets to calling set_cached_acl(), and then
get_acl's call to set_cached_acl() results in caching an outdate ACL.
Prevent this from happening by setting the cached ACL pointer to a
task-specific sentinel value before calling the get_acl inode operation.
Move the responsibility for updating the cached ACL from the get_acl
inode operations to get_acl(). There, only set the cached ACL if the
sentinel value hasn't changed.
The sentinel values are chosen to have odd values. Likewise, the value
of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have
an even value (ACLs are aligned in memory). This allows to distinguish
uncached ACLs values from ACL objects.
In addition, switch from guarding inode->i_acl and inode->i_default_acl
upates by the inode->i_lock spinlock to using xchg() and cmpxchg().
Filesystems that do not want ACLs returned from their get_acl inode
operations to be cached must call forget_cached_acl() to prevent the VFS
from doing so.
(Patch written by Al Viro and Andreas Gruenbacher.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With the qcom_smd_open_channel() API we allow SMD devices to open
additional SMD channels, to allow implementation of multi-channel SMD
devices - like Bluetooth.
Channels are opened from the same edge as the calling SMD device is tied
to.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
All current users of regulator_can_change_voltage() are abusing it,
using it to wrap a call to regulator_set_voltage() on probe without any
alternative handling for fixed voltages. Drivers should only be using
regulator_set_voltage() if they need to vary voltages at runtime, fixed
voltages should normally be set via machine constraints, and calling
regulator_set_voltage() on a regulator which can't be varied will
succeed if the current voltage is within the range requested so users
shouldn't worry if they have permission to vary normally.
Deprecate the API to try to stop any new users appearing while we fix
the current callers.
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows us to ditch a ton of ugly #ifdefs from a bunch of drm modeset
drivers.
v2: Make the dummy function actually return a sane value, spotted by
Ville.
v3: Because the patch is still in limbo there's no more drivers to
convert, noticed by Emil.
v4: Rebase once more, because hooray. I'll just go ahead an apply this
one later on to drm-misc.
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In some SoCs some hw-blocks share a reset control. Add support for this
setup by adding new:
reset_control_get_shared()
devm_reset_control_get_shared()
devm_reset_control_get_shared_by_index()
methods to get a reset_control. Note that this patch omits adding of_
variants, if these are needed later they can be easily added.
This patch also changes the behavior of the existing exclusive
reset_control_get() variants, if these are now called more then once
for the same reset_control they will return -EBUSY. To catch existing
drivers triggering this error (there should not be any) a WARN_ON(1)
is added in this path.
When a reset_control is shared, the behavior of reset_control_assert /
deassert is changed, for shared reset_controls these will work like the
clock-enable/disable and regulator-on/off functions. They will keep a
deassert_count, and only (re-)assert the reset after reset_control_assert
has been called as many times as reset_control_deassert was called.
Calling reset_control_assert without first calling reset_control_deassert
is not allowed on a shared reset control. Calling reset_control_reset is
also not allowed on a shared reset control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Now that struct reset_control no longer stores the device pointer for
the device calling reset_control_get we can share a single struct
reset_control when multiple calls to reset_control_get are made for
the same reset line (same id / index).
This is a preparation patch for adding support for shared reset lines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
With both the regular, _by_index and _optional variants we already have
quite a few variants of [of_]reset_control_get[_foo], the upcoming
addition of shared reset lines support makes this worse.
This commit changes all the variants into wrappers around common core
functions. For completeness sake this commit also adds a new
devm_get_reset_control_by_index wrapper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Like with kconfig options, we now have the ability to compile in and
out individual EXPORT_SYMBOL() declarations based on the content of
include/generated/autoksyms.h. However we don't want the entire
world to be rebuilt whenever that file is touched.
Let's apply the same build dependency trick used for CONFIG_* symbols
where the time stamp of empty files whose paths matching those symbols
is used to trigger fine grained rebuilds. In our case the key is the
symbol name passed to EXPORT_SYMBOL().
However, unlike config options, we cannot just use fixdep to parse
the source code for EXPORT_SYMBOL(ksym) because several variants exist
and parsing them all in a separate tool, and keeping it in synch, is
not trivially maintainable. Furthermore, there are variants such as
EXPORT_SYMBOL_GPL(pci_user_read_config_##size);
that are instanciated via a macro for which we can't easily determine
the actual exported symbol name(s) short of actually running the
preprocessor on them.
Storing the symbol name string in a special ELF section doesn't work
for targets that output assembly or preprocessed source.
So the best way is really to leverage the preprocessor by having it
output actual symbol names anchored by a special sequence that can be
easily filtered out. Then the list of symbols is simply fed to fixdep
to be merged with the other dependencies.
That implies the preprocessor is executed twice for each source file.
A previous attempt relied on a warning pragma for each EXPORT_SYMBOL()
instance that was filtered apart from stderr by the build system with
a sed script during the actual compilation pass. Unfortunately the
preprocessor/compiler diagnostic output isn't stable between versions
and this solution, although more efficient, was deemed too fragile.
Because of the lowercasing performed by fixdep, there might be name
collisions triggering spurious rebuilds for similar symbols. But this
shouldn't be a big issue in practice. (This is the case for CONFIG_*
symbols and I didn't want to be different here, whatever the original
reason for doing so.)
To avoid needless build overhead, the exported symbol name gathering is
performed only when CONFIG_TRIM_UNUSED_KSYMS is selected.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Similar to include/generated/autoconf.h, include/generated/autoksyms.h
will contain a list of defines for each EXPORT_SYMBOL() that we want
active. The format is:
#define __KSYM_<symbol_name> 1
This list will be auto-generated with another patch. For now we only
include the preprocessor magic to automatically create or omit the
corresponding struct kernel_symbol declaration.
Given the content of include/generated/autoksyms.h may not be known in
advance, an empty file is created early on to let the build proceed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Many motherboards utilize a LPC to ISA bridge in order to decode
ISA-style port-mapped I/O addresses. This is particularly true for
embedded motherboards supporting the PC/104 bus (a bus specification
derived from ISA).
These motherboards are now commonly running 64-bit x86 processors. The
X86_32 dependency should be removed from the ISA bus configuration
option in order to support these newer motherboards.
A new config option, CONFIG_ISA_BUS, is introduced to allow for the
compilation of the ISA bus driver independent of the CONFIG_ISA option.
Devices which communicate via ISA-compatible buses can now be supported
independent of the dependencies of the CONFIG_ISA option.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently a dynamically allocated character device major is taken
from 254 and downward. This mechanism is used for RTC, IIO and a
few other subsystems.
The kernel currently has no check prevening these dynamic
allocations from eating into the assigned numbers at 233 and
downward.
In a recent test it was reported that so many dynamic device
majors were used on a test server, that the major number for
infiniband (231) was stolen. This occurred when allocating a new
major number for GPIO chips. The error messages from the kernel
were not helpful. (See: https://lkml.org/lkml/2016/2/14/124)
This patch adds a defined lower limit of the dynamic major
allocation region will henceforth emit a warning if we start to
eat into the assigned numbers. It does not do any semantic
changes and will not change the kernels behaviour: numbers will
still continue to be stolen, but we will know from dmesg what
is going on.
This also updates the Documentation/devices.txt to clearly
reflect that we are using this range of major numbers for dynamic
allocation.
Reported-by: Ying Huang <ying.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch functionally reverts:
5fd7a09cfb ("atomic: Export fetch_or()")
During the merge Linus observed that the generic version of fetch_or()
was messy:
" This makes the ugly "fetch_or()" macro that the scheduler used
internally a new generic helper, and does a bad job at it. "
e23604edac Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Now that we have introduced atomic_fetch_or(), fetch_or() is only used
by the scheduler in order to deal with thread_info flags which type
can vary across architectures.
Lets confine fetch_or() back to the scheduler so that we encourage
future users to use the more robust and well typed atomic_t version
instead.
While at it, fetch_or() gets robustified, pasting improvements from a
previous patch by Ingo Molnar that avoids needless expression
re-evaluations in the loop.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1458830281-4255-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This makes the code easier to read and it avoids a dynamic memory
allocation.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This fix adds a new reference counter (ref_netlink) for the struct ip_set.
The other reference counter (ref) can be swapped out by ip_set_swap and we
need a separate counter to keep track of references for netlink events
like dump. Using the same ref counter for dump causes a race condition
which can be demonstrated by the following script:
ipset create hash_ip1 hash:ip family inet hashsize 1024 maxelem 500000 \
counters
ipset create hash_ip2 hash:ip family inet hashsize 300000 maxelem 500000 \
counters
ipset create hash_ip3 hash:ip family inet hashsize 1024 maxelem 500000 \
counters
ipset save &
ipset swap hash_ip3 hash_ip2
ipset destroy hash_ip3 /* will crash the machine */
Swap will exchange the values of ref so destroy will see ref = 0 instead of
ref = 1. With this fix in place swap will not succeed because ipset save
still has ref_netlink on the set (ip_set_swap doesn't swap ref_netlink).
Both delete and swap will error out if ref_netlink != 0 on the set.
Note: The changes to *_head functions is because previously we would
increment ref whenever we called these functions, we don't do that
anymore.
Reviewed-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff
instead of 0x1f) thus reading entire register as buck9's voltage. This
effectively caused regulator core to interpret values as higher voltages
than they were and then to set real voltage much lower than intended.
The buck9 provides power to other regulators, including LDO13
and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower
voltage caused SD card detection errors on Odroid XU3/XU4:
mmc1: card never left busy state
mmc1: error -110 whilst initialising SD card
During driver probe the regulator core was checking whether initial
voltage matches the constraints. With incorrect vsel_mask of 0xff and
default value of 0x50, the core interpreted this as 5 V which is outside
of constraints (3-3.775 V). Then the regulator core was adjusting the
voltage to match the constraints. With incorrect vsel_mask this new
voltage mapped to a vere low voltage in the driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
