The SBU and HSL orientation may be fixed/static from the mux
PoW. Apparently the retimer may take care of the orientation
of these lines. Handling the static SBU (AUX) and HSL
orientation with device properties.
If the SBU orientation is static, a device property
"sbu-orintation" can be used. When the property exists, the
driver always sets the SBU orientation according to the
property value, and when it's not set, the driver uses the
cable plug orientation with SBU.
And with static HSL orientation, "hsl-orientation" device
property can be used in the same way.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200507150900.12102-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi_get_host_dev() will create a virtual device such that either
the target id is ignored from scanning (if 'this_id' is set to
something which can be reached during scanning) or if the driver
needs a scsi device for the HBA to send commands to.
Neither is true for sierra-ms; 'this_id' remains at the default
value '-1' and the created device is never ever used within
the driver.
So kill it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200505143019.57418-1-hare@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All processes' PSR could success from SETUP_MMU, so need set it
in INIT_THREAD again.
And use a3 instead of r7 in __switch_to for code convention.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Interrupt has been disabled in __schedule() with local_irq_disable()
and enabled in finish_task_switch->finish_lock_switch() with
local_irq_enabled(), So needn't to disable irq here.
Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The implementation of show_stack will panic with wrong fp:
addr = *fp++;
because the fp isn't checked properly.
The current implementations of show_stack, wchan and stack_trace
haven't been designed properly, so just deprecate them.
This patch is a reference to riscv's way, all codes are modified from
arm's. The patch is passed with:
- cat /proc/<pid>/stack
- cat /proc/<pid>/wchan
- echo c > /proc/sysrq-trigger
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Just as comment mentioned, the msa format:
cr<30/31, 15> MSA register format:
31 - 29 | 28 - 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
BA Reserved SH WA B SO SEC C D V
So we should shift 29 bits not 28 bits for mask
Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
case:
# perf probe -x /lib/libc-2.28.9000.so memcpy
# perf record -e probe_libc:memcpy -aR sleep 1
System hangup and cpu get in trap_c loop, because our hardware
singlestep state could still get interrupt signal. When we get in
uprobe_xol singlestep slot, we should disable irq in pt_regs->psr.
And is_swbp_insn() need a csky arch implementation with a low 16bit
mask.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
This bug is from uprobe signal definition in thread_info.h. The
instruction (andi) of abiv1 immediate is smaller than abiv2, then
it will cause:
AS arch/csky/kernel/entry.o
arch/csky/kernel/entry.S: Assembler messages:
arch/csky/kernel/entry.S:224: Error: Operand 2 immediate is overflow.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
When CONFIG_DYNAMIC_FTRACE is enabled, static ftrace will fail to
boot up and compile. It's a carelessness when developing "dynamic
ftrace" and "ftrace with regs".
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Addition of the new internal API to get the clkctrl names missed adding
the same conversion in place for the subclocks. This leads into missed
parent/child relationships (i.e. orphaned clocks) with mixed node name
handling, for example with omap4/omap5 where the l4_per clocks are using
new naming, but rest are using old. Fix by converting the subclock
registration to pick correct names for the clocks also.
Fixes: 6c30905205 ("clk: ti: clkctrl: Fix hidden dependency to node name")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200430083451.8562-1-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Right now, trying to use RTC purely with the ti-sysc / clkctrl framework
fails to enable the RTC module properly. Based on experimentation, this
appears to be because RTC is sourced from the clkdiv32k optional clock.
TRM is not very clear on this topic, but fix the RTC to use the proper
source clock nevertheless.
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200424152301.4018-1-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clkctrl_get_name incorrectly calls of_node_put when it is not really
doing of_node_get. This causes a boot time warning later on:
[ 0.000000] OF: ERROR: Bad of_node_put() on /ocp/interconnect@4a000000/segmen
t@0/target-module@5000/cm_core_aon@0/ipu-cm@500/ipu1-clkctrl@20
Fix by dropping the of_node_put from the function.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 6c30905205 ("clk: ti: clkctrl: Fix hidden dependency to node name")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200424124725.9895-1-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The cipso and calipso code can set the MLS_CAT attribute on
successful parsing, even if the corresponding catmap has
not been allocated, as per current configuration and external
input.
Later, selinux code tries to access the catmap if the MLS_CAT flag
is present via netlbl_catmap_getlong(). That may cause null ptr
dereference while processing incoming network traffic.
Address the issue setting the MLS_CAT flag only if the catmap is
really allocated. Additionally let netlbl_catmap_getlong() cope
with NULL catmap.
Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com>
Fixes: 4b8feff251 ("netlabel: fix the horribly broken catmap functions")
Fixes: ceba1832b1 ("calipso: Set the calipso socket label to match the secattr.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers use PAGE_SHARED, pgprot_writecombine()/pgprot_device(),
add the defination to fix build error if NOMMU.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Drop static declaration to fix following build error if FRAME_POINTER disabled,
riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Pull one Rockchip clk fix from Heiko Stuebner:
- Fix for wrongly defines rk3228 aclk_gpu*
* tag 'v5.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
pll_a_out0 and the I2S clocks are already configured to default to rates
corresponding to a 44.1 kHz sampling rate, but the pll_a configuration
was set to a default that is not listed in the frequency table, which
caused the PLL code to compute an invalid configuration. As a result of
this invalid configuration, Jetson TK1 fails to resume from suspend.
This used to get papered over because the ASoC driver would force audio
clocks to a 44.1 kHz configuration on boot. However, that's not really
necessary and was hence removed in commit ff5d18cb04 ("ASoC: tegra:
Enable audio mclk during tegra_asoc_utils_init()").
Fix the initial rate for pll_a so that it matches the 44.1 kHz entry in
the pll_a frequency table.
Fixes: ff5d18cb04 ("ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lkml.kernel.org/r/20200505071655.644773-1-thierry.reding@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Booting one of my machines, it triggered the following crash:
Kernel/User page tables isolation: enabled
ftrace: allocating 36577 entries in 143 pages
Starting tracer 'function'
BUG: unable to handle page fault for address: ffffffffa000005c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
RIP: 0010:text_poke_early+0x4a/0x58
Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff
0 41 57 49
RSP: 0000:ffffffff82003d38 EFLAGS: 00010046
RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005
RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c
RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0
R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0
R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0
FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0
Call Trace:
text_poke_bp+0x27/0x64
? mutex_lock+0x36/0x5d
arch_ftrace_update_trampoline+0x287/0x2d5
? ftrace_replace_code+0x14b/0x160
? ftrace_update_ftrace_func+0x65/0x6c
__register_ftrace_function+0x6d/0x81
ftrace_startup+0x23/0xc1
register_ftrace_function+0x20/0x37
func_set_flag+0x59/0x77
__set_tracer_option.isra.19+0x20/0x3e
trace_set_options+0xd6/0x13e
apply_trace_boot_options+0x44/0x6d
register_tracer+0x19e/0x1ac
early_trace_init+0x21b/0x2c9
start_kernel+0x241/0x518
? load_ucode_intel_bsp+0x21/0x52
secondary_startup_64+0xa4/0xb0
I was able to trigger it on other machines, when I added to the kernel
command line of both "ftrace=function" and "trace_options=func_stack_trace".
The cause is the "ftrace=function" would register the function tracer
and create a trampoline, and it will set it as executable and
read-only. Then the "trace_options=func_stack_trace" would then update
the same trampoline to include the stack tracer version of the function
tracer. But since the trampoline already exists, it updates it with
text_poke_bp(). The problem is that text_poke_bp() called while
system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not
the page mapping, as it would think that the text is still read-write.
But in this case it is not, and we take a fault and crash.
Instead, lets keep the ftrace trampolines read-write during boot up,
and then when the kernel executable text is set to read-only, the
ftrace trampolines get set to read-only as well.
Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a ("x86/ftrace: Use text_poke()")
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When multiple async FDs were allowed to exist the idea was for all
broadcast events to be delivered to all async FDs, however
IB_EVENT_DEVICE_FATAL was missed.
Instead of having ib_uverbs_free_hw_resources() special case the global
async_fd, have it cause the event during the uobject destruction. Every
async fd is now a uobject so simply generate the IB_EVENT_DEVICE_FATAL
while destroying the async fd uobject. This ensures every async FD gets a
copy of the event.
Fixes: d680e88e20 ("RDMA/core: Add UVERBS_METHOD_ASYNC_EVENT_ALLOC")
Link: https://lore.kernel.org/r/20200507063348.98713-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit below moved all of the destruction to the disassociate step and
cleaned up the event channel during destroy_uobj.
However, when ib_uverbs_free_hw_resources() pushes IB_EVENT_DEVICE_FATAL
and then immediately goes to destroy all uobjects this causes
ib_uverbs_free_event_queue() to discard the queued event if userspace
hasn't already read() it.
Unlike all other event queues async FD needs to defer the
ib_uverbs_free_event_queue() until FD release. This still unregisters the
handler from the IB device during disassociation.
Fixes: 3e032c0e92 ("RDMA/core: Make ib_uverbs_async_event_file into a uobject")
Link: https://lore.kernel.org/r/20200507063348.98713-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100%
overhead in tcp_set_rcvlowat()
This works well when skb->len/skb->truesize ratio is bigger than 0.5
But if we receive packets with small MSS, we can end up in a situation
where not enough bytes are available in the receive queue to satisfy
RCVLOWAT setting.
As our sk_rcvbuf limit is hit, we send zero windows in ACK packets,
preventing remote peer from sending more data.
Even autotuning does not help, because it only triggers at the time
user process drains the queue. If no EPOLLIN is generated, this
can not happen.
Note poll() has a similar issue, after commit
c7004482e8 ("tcp: Respect SO_RCVLOWAT in tcp_poll().")
Fixes: 03f45c883c ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
My recent commit b6d49cab44 ("net: Make PTP-specific drivers depend on
PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
form:
drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
...
That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
functions) _is_ enabled. So we end up compiling calls to functions that
don't exist, resulting in the linker errors.
This patch fixes build errors and restores previous behavior by:
- ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
- remove TI_CPTS_MOD and, instead, add dependencies from CPTS in
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below:
config TI_CPSW_SWITCHDEV
...
depends on TI_CPTS || !TI_CPTS
which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS ->
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection.
Note. For NFS boot + CPTS all of above configs have to be built-in.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Fixes: b6d49cab44 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Clay McClure <clay@daemons.net>
[grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic fixes
These are a couple more fixes after more fw-upgrade testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the fw has been re-inited, we need to refresh the port
information dma address so we can see fresh port information.
Let's call ionic_port_init again, and tweak it to allow for
a call to simply refresh the existing dma address.
Fixes: c672412f61 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in a bond setup, or some other potential
configurations, the netdev mac may have been changed from
the default device mac. Since the userland doesn't know
about the changes going on under the covers in a fw-upgrade
it doesn't know the re-push the mac filter. The driver
needs to leave the netdev mac filter alone when rebuilding
after the fw-upgrade.
Fixes: c672412f61 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the other MPTCP-peer uses 32-bit data-sequence numbers, we rely on
map_seq to indicate how to expand to a 64-bit data-sequence number in
expand_seq() when receiving data.
For new subflows, this field is not initialized, thus results in an
"invalid" mapping being discarded.
Fix this by initializing map_seq upon subflow establishment time.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull tracing fixes from Steven Rostedt:
"Fixes to previous fixes.
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to
return a positive number on success, when it should have returned
zero.
- The preempt_irq_delay_thread fix to make the creation code wait for
the kthread to finish to prevent it from executing after module
unload, can now cause the kthread to exit before it even executes
(preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not on
the command line"
* tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix to prevent warning message if no bootconfig option
tracing: Wait for preempt irq delay thread to execute
tools/bootconfig: Fix apply_xbc() to return zero on success
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes for v5.7, slightly overdue. Been learning MMUs and
KASan that is why it's late. Bartosz helped me out, luckily!
- Fix pin configuration in the PCA953x driver
- Ruggedize the watch/unwatch ioctl()
- Possible call to a sleeping function when holding a spinlock, avoid
this
- Fix UML builds with DT overlays
- Mask Tegra GPIO IRQs during shutdown()"
* tag 'gpio-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tegra: mask GPIO IRQs during IRQ shutdown
gpio: of: Build fails if CONFIG_OF_DYNAMIC enabled without CONFIG_OF_GPIO
gpiolib: don't call sleeping functions with a spinlock taken
gpiolib: improve the robustness of watch/unwatch ioctl()
gpio: pca953x: Fix pca953x_gpio_set_config
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes.
Fixes for bugs prior to v5.7:
- Fix random block reads when reading fragmented journals (v5.2)
- Fix a possible random memory access in gfs2_walk_metadata (v5.3)
Fixes for v5.7:
- Fix several overlooked gfs2_qa_get / gfs2_qa_put imbalances
- Fix several bugs in the new filesystem withdraw logic"
* tag 'gfs2-v5.7-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Don't demote a glock until its revokes are written"
gfs2: If go_sync returns error, withdraw but skip invalidate
gfs2: Grab glock reference sooner in gfs2_add_revoke
gfs2: don't call quota_unhold if quotas are not locked
gfs2: move privileged user check to gfs2_quota_lock_check
gfs2: remove check for quotas on in gfs2_quota_check
gfs2: Change BUG_ON to an assert_withdraw in gfs2_quota_change
gfs2: Fix problems regarding gfs2_qa_get and _put
gfs2: More gfs2_find_jhead fixes
gfs2: Another gfs2_walk_metadata fix
gfs2: Fix use-after-free in gfs2_logd after withdraw
gfs2: Fix BUG during unmount after file system withdraw
gfs2: Fix error exit in do_xmote
gfs2: fix withdraw sequence deadlock
Control dependencies do not guarantee load order across the condition,
allowing a CPU to predict and speculate memory reads.
Commit 324b494c28 inlined verifying a new completion with its
handling. At least one architecture was observed to access the contents
out of order, resulting in the driver using stale data for the
completion.
Add a dma read barrier before reading the completion queue entry and
after the condition its contents depend on to ensure the read order is
determinsitic.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
