The atomic conversion of the qxl driver didn't got the primary surface
handling completely right. It works in the common simple cases, but
fails for example when changing the display resolution using xrandr or
in multihead setups.
The rules are simple: There is one primary surface. Before defining a
new one you have to destroy the old one.
This patch makes qxl_primary_atomic_update() destroy the primary surface
before defining a new one. It fixes is_primary flag updates. It adds
is_primary checks so we don't try to update the primary surface in case
it already has the state we want it being in.
Fixes: 3538e80a86 ("drm: qxl: Atomic phase 1: Implement mode_set_nofb")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102338
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196777
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170911093950.22401-1-kraxel@redhat.com
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Call qxl_add_monitors_config_modes() unconditionally. Do all sanity
checks in that function.
Fix sanity checks. monitors_config is the current monitor
configuration, whereas client_monitors_config is the configuration
requested by the spice client. So when filling the mode list, based on
the spice client request, we need to look at
client_monitors_config->count not monitors_config->count.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-5-git-send-email-kraxel@redhat.com
Try to read the client monitors config at driver load time, even without
explicit notification. So in case that info was filled before the driver
loaded and we've missed the notifications because of that the settings
will still be used.
With that place we now have to take care to properly handle a empty client
monitors config, so we don't trip over an uninitialized client monitors
config.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-4-git-send-email-kraxel@redhat.com
Every attempt to pin/unpin objects in memory requires
qxl_bo_reserve/unreserve calls around the pinning operation to protect
the object from concurrent access, which causes that call sequence to be
reproduced every place where pinning is needed. In some cases, that
sequence was not executed correctly, resulting in potential unprotected
pinning operations.
This commit encapsulates the reservation inside a new wrapper to make
sure it is always handled properly. In cases where reservation must be
done beforehand, for some reason, one can use the unprotected version
__qxl_bo_pin/unpin.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-3-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The use of drm_cvt_mode() in qxl_add_monitors_config_modes() means that
the resolutions we are going to present to user-space are going to be
rounded down to a multiple of 8. In the QXL arbitrary resolution case,
this is not useful.
This commit forces the actual width/height that was requested by the
client in the drm_display_mode structure rather than keeping the
rounded version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161108091209.25568-8-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt,
we currently always notify userspace that there was some hotplug event.
However, gnome-shell/mutter is reacting to this event by attempting a
resolution change, which it does by issueing drmModeRmFB, drmModeAddFB,
and then drmModeSetCrtc. This has the side-effect of causing
qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary
surface was destroyed and created. After going through QEMU and then the
remote SPICE client, a new identical monitors config message will be
sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to
be emitted, and the same scenario occurring again.
As destroying/creating the primary surface causes a visible screen
flicker, this makes the guest hard to use (
https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ).
This commit checks if the screen configuration we received is the same
one as the current one, and does not notify userspace about it if that's
the case.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-7-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qxl driver currently destroys and recreates the
qxl "primary" any time the first crtc is set.
A side-effect of destroying the primary is mouse state
associated with the crtc is lost, which leads to
disappearing mouse cursors on wayland sessions.
This commit changes the driver to reapply the cursor
any time SetCrtc is called. It achieves this by keeping
a reference to the cursor bo on the qxl_crtc struct.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Message-id: 1473433745-11016-1-git-send-email-halfline@gmail.comhttps://bugzilla.redhat.com/show_bug.cgi?id=1200901
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The SPICE protocol considers the position of a cursor to be the location
of its active pixel on the display, so the cursor is drawn with its
top-left corner at "(x - hot_spot_x, y - hot_spot_y)" but the DRM cursor
position gives the location where the top-left corner should be drawn,
with the hotspot being a hint for drivers that need it.
This fixes the location of the window resize cursors when using Fluxbox
with the QXL DRM driver and both the QXL and modesetting X drivers.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1447845445-2116-1-git-send-email-john@metanate.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that the mode type bit merge logic is fixed to only merge
between new probed modes, hopefully we can eliminat the special
case for qxl and virtio. That is make the merge the mode type
bits from all matching new probed modes, just like every other
driver.
qxl and virtio got excluded from the merging in
commit 3fbd6439e4 ("drm: copy mode type in drm_mode_connector_list_update()")
commit abce1ec9b0 ("Revert "drm: copy mode type in drm_mode_connector_list_update()"")
commit b87577b7c7 ("drm: try harder to avoid regression when merging mode bits")
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Resolve conflicts with doc updates.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4;
@@
drm_encoder_init(E1, E2, E3, E4
+ ,NULL
)
v2: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
