This adds a new drm_setup_crtcs_fb() function to handle the parts of
drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When
drm_setup_crtcs() is called during initialization, these fields are NULL
because they have not been allocated yet.
There is currently a hack at the end of drm_fb_helper_single_fb_probe()
that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb()
function.
This is also done in preparation for addition setup that requires access
to fb_helper->fbdev.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501777149-8310-2-git-send-email-david@lechnology.com
FB helper code falls back to a 1024x768 mode if no outputs are connected
or don't report back any modes upon initialization. This can be annoying
because outputs that are added to FB helper later on can't be used with
FB helper if they don't support a matching mode.
The fallback is in place because VGA connectors can happen to report an
unknown connection status even when they are in fact connected.
Some drivers have custom solutions in place to defer FB helper setup
until at least one output is connected. But the logic behind these
solutions is always the same and there is nothing driver-specific about
it, so a better alterative is to fix the FB helper core and add support
for all drivers automatically.
This patch adds support for deferred FB helper setup. It checks all the
connectors for their connection status, and if all of them report to be
disconnected marks the FB helper as needing deferred setup. Whet setup
is deferred, the FB helper core will automatically retry setup after a
hotplug event, and it will keep trying until it succeeds.
v2: Rebase onto my entirely reworked fbdev helper locking. One big
difference is that this version again drops&reacquires the fbdev lock
(which is now fb_helper->lock, but before this patch series it was
mode_config->mutex), because register_framebuffer must be able to
recurse back into fbdev helper code for the initial screen setup.
v3: __drm_fb_helper_initial_config must hold fb_helper->lock upon
return, I've fumbled that in the deferred setup case (Liviu).
v4: I was blind, redo this all. __drm_fb_helper_initial_config
shouldn't need to reacquire fb_helper->lock, that just confuses
callers. I myself got confused by kernel_fb_helper_lock and somehow
thought it's the same as fb_helper->lock. Tsk.
Also simplify the logic a bit (we don't need two functions to probe
connectors), we can stick much closer to the existing code. And update
some comments I've spotted that are outdated.
v5: Don't pass -EAGAIN to drivers, it's just an internal error code
(Liviu).
v6: Add _and_unlock suffix to clarify locking (Maarten)
Cc: Liviu Dudau <liviu@dudau.co.uk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-3-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The legacy path implements setcmap in terms of crtc .gamma_set.
The atomic path implements setcmap by directly updating the crtc gamma_lut
property.
This has a couple of benefits:
- it makes the redundant fb helpers .load_lut, .gamma_set and .gamma_get
completely obsolete. They are now unused and subject for removal.
- atomic drivers that support clut modes get fbdev support for those from
the drm core. This includes atmel-hlcdc, but perhaps others as well?
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-4-peda@axentia.se
Like with panning and modesetting, and like with those, stick with
simple drm_modeset_locking_all for the legacy path, and the full
atomic dance for atomic drivers.
This means a bit more boilerplate since setting up the atomic state
machinery is rather verbose, but then this is shared code for 30+
drivers or so, so meh.
After this patch there's only the LUT/cmap path which is still using
drm_modeset_lock_all for an atomic driver. But Peter is already
locking into reworking that, so I'll leave that code as-is for now.
v2: Squash in patches from Maarten to unify all the various atomic
paths into just one atomic update function for fbdev overall. On top
do one s/restore_fbdev_mode/restore_fbdev_mode_atomic/ so that we have
all-atomic callchains after the first check.
Cc: Peter Rosin <peda@axentia.se>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-10-daniel.vetter@ffwll.ch
Introduce a new top-level lock for the FB helper code. This will allow
better locking granularity and avoid the need to abuse modeset locking
for this purpose instead.
This patch just adds the new lock everywhere we currently grab
mode_config->mutex (explicitly, or through drm_modeset_lock_all).
Follow-up patches will push the kms locking down into only the places
that need it.
v2:
- use lockdep_assert_held
- use drm_fb_helper_for_each_connector where possible
- use the new top-level lock consistently, i.e. in all the places
we're currently acquiring mode_config.mutex.
- small polish to the kerneldoc
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-4-daniel.vetter@ffwll.ch
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
as a convenience.
Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
through the atomic API, but realizing that userspace is likely to take
shortcuts and assume that the enum values are what is sent over the
wire.
As a result these defines are provided purely as a convenience to
userspace applications.
Changes since v3:
- Switched away from past tense in comments
- Add define name change to previously mis-spelled DRM_REFLECT_X comment
- Improved the comment for the DRM_MODE_REFLECT_<axis> comment
Changes since v2:
- Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_
- Fix compilation errors
- Changed comment formatting
- Deduplicated comment lines
- Clarified DRM_MODE_PROP_REFLECT_ comment
Changes since v1:
- Moved defines from drm.h to drm_mode.h
- Changed define prefix from DRM_ to DRM_MODE_PROP_
- Updated uses of the defines to the new prefix
- Removed include from drm_rect.c
- Stopped using the BIT() macro
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
The goal is to push all the kms locking down into these separate
_atomic and _legacy functions, so that we can correctly pass the
acquire ctx into all atomic drivers. Instead of playing games with
hidden ctx in mode_config.acquire_ctx. All the fbdev state will be
protected by a new fbdev private lock that Thierry is working on.
This here is just prep by creating a clean split between atomic and
legacy paths, which also simplifies the control flow a bit.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-16-daniel.vetter@ffwll.ch
It just doesn't work. It probably stopped working way, way before that
(e.g. i915 grabbed random mutexes all over in modeset code at least
since gen6), but with atomic and all the ww_mutex stuff it's indeed
hopeless.
Remove ->mode_set_base_atomic from the 2 atomic drivers (i915 and
nouveau) that still had one (both had dummy implementations already
anyway), and shunt atomic drivers in the helpers debug_enter/leave
functions.
I'll leave the code in for radeon and amdgpu, but I think as soon as
amdgpu is atomic we should think about just ripping it out. Only
having it around for radeon and pre-nv50 is rather pointless. This
would also allow us to nuke all that code from fbdev.
Funny part is that _all_ kms drivers set this hook, despite that no
one else provides the required ->mode_set_base_atomic implementation.
The reason I'm jumping on this is that I want to wire up a full
acquire ctx for the benefit of atomic drivers, everywhere. And the
debug_enter/leave implementations call ->gamma_set. And there's just
no way ever we can create an acquire_ctx in the nmi context of kgdb.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-11-daniel.vetter@ffwll.ch
Implement legacy framebuffer ioctl FBIO_WAITFORVSYNC in the generic
framebuffer emulation driver. Legacy framebuffer users like non kms/drm
based OpenGL(ES)/EGL implementations may require the ioctl to
synchronize drawing or buffer flip for double buffering. It is tested on
the i.MX6.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently the functions that initialize and tear down a connector
iterator use the _get() and _put() suffixes. However, these suffixes
are typically used by reference counting functions.
Make these function names a little more consistent by changing the
suffixes to _begin() and _end(), which is a fairly common pattern in
the rest of the Linux kernel.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-8-thierry.reding@gmail.com
For consistency with other reference counting APIs in the kernel, add
drm_connector_get() and drm_connector_put() functions to reference count
connectors.
Compatibility aliases are added to keep existing code working. To help
speed up the transition, all the instances of the old functions in the
DRM core are already replaced in this commit.
The existing semantic patch for mode object reference count conversion
is extended for these new helpers.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-4-thierry.reding@gmail.com
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure. I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.
I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates. The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.
// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>
Changes since v1:
- Rebased on top of the tip of drm-misc-next.
- Remove mention to sti since a proper fix got merged.
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
drm_fb_helper_probe_connector_modes() is always called before
drm_setup_crtcs(), so just move the call into drm_setup_crtcs for a
small bit of code compaction.
Note that register_framebuffer will do a modeset (when fbcon is enabled)
and hence must be moved out of the critical section. A follow-up patch
will add new locking for the fb list, hence move all the related
registration code together.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-2-chris@chris-wilson.co.uk
The fb_helper->connector_count is modified when a new connector is
constructed following a hotplug event (e.g. DP-MST). This causes trouble
for drm_setup_crtcs() and friends that assume that fb_helper is
constant:
[ 1250.872997] BUG: KASAN: slab-out-of-bounds in drm_setup_crtcs+0x320/0xf80 at addr ffff88074cdd2608
[ 1250.873020] Write of size 40 by task kworker/u8:3/480
[ 1250.873039] CPU: 2 PID: 480 Comm: kworker/u8:3 Tainted: G U 4.9.0-rc6+ #285
[ 1250.873043] Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[ 1250.873050] Workqueue: events_unbound async_run_entry_fn
[ 1250.873056] ffff88070f9d78f0 ffffffff814b72aa ffff88074e40c5c0 ffff88074cdd2608
[ 1250.873067] ffff88070f9d7918 ffffffff8124ff3c ffff88070f9d79b0 ffff88074cdd2600
[ 1250.873079] ffff88074e40c5c0 ffff88070f9d79a0 ffffffff812501e4 0000000000000005
[ 1250.873090] Call Trace:
[ 1250.873099] [<ffffffff814b72aa>] dump_stack+0x67/0x9d
[ 1250.873106] [<ffffffff8124ff3c>] kasan_object_err+0x1c/0x70
[ 1250.873113] [<ffffffff812501e4>] kasan_report_error+0x204/0x4f0
[ 1250.873120] [<ffffffff81698df0>] ? drm_dev_printk+0x140/0x140
[ 1250.873127] [<ffffffff81250ac3>] kasan_report+0x53/0x60
[ 1250.873134] [<ffffffff81688b40>] ? drm_setup_crtcs+0x320/0xf80
[ 1250.873142] [<ffffffff8124f18e>] check_memory_region+0x13e/0x1a0
[ 1250.873147] [<ffffffff8124f5f3>] memset+0x23/0x40
[ 1250.873154] [<ffffffff81688b40>] drm_setup_crtcs+0x320/0xf80
[ 1250.873161] [<ffffffff810be7c5>] ? wake_up_q+0x45/0x80
[ 1250.873169] [<ffffffff81b0c180>] ? mutex_lock_nested+0x5a0/0x5a0
[ 1250.873176] [<ffffffff8168a0e6>] drm_fb_helper_initial_config+0x206/0x7a0
[ 1250.873183] [<ffffffff81689ee0>] ? drm_fb_helper_set_par+0x90/0x90
[ 1250.873303] [<ffffffffa0b68690>] ? intel_fbdev_fini+0x140/0x140 [i915]
[ 1250.873387] [<ffffffffa0b686b2>] intel_fbdev_initial_config+0x22/0x40 [i915]
[ 1250.873391] [<ffffffff810b50ff>] async_run_entry_fn+0x7f/0x270
[ 1250.873394] [<ffffffff810a64b0>] process_one_work+0x3d0/0x960
[ 1250.873398] [<ffffffff810a641d>] ? process_one_work+0x33d/0x960
[ 1250.873401] [<ffffffff810a60e0>] ? max_active_store+0xf0/0xf0
[ 1250.873406] [<ffffffff810f6f9d>] ? do_raw_spin_lock+0x10d/0x1a0
[ 1250.873413] [<ffffffff810a767d>] worker_thread+0x8d/0x840
[ 1250.873419] [<ffffffff810a75f0>] ? create_worker+0x2e0/0x2e0
[ 1250.873426] [<ffffffff810b0454>] kthread+0x194/0x1c0
[ 1250.873432] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873438] [<ffffffff810f095d>] ? trace_hardirqs_on+0xd/0x10
[ 1250.873446] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873453] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873457] [<ffffffff81b12277>] ret_from_fork+0x27/0x40
[ 1250.873460] Object at ffff88074cdd2608, in cache kmalloc-32 size: 32
However, when holding the mode_config.lock around the fb_helper, we have
to be careful of any callbacks that may reenter the fb_helper and so try
to reacquire the mode_config.lock (e.g. register_framebuffer). To avoid
the mutex recursion, we have to rearrange the sequence to move the
registration into the caller outside of the mode_config.lock.
v2: drop the 1; following the lockdep assertion inside the for(;;), I
anticipated an error that doesn't happen!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98826
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-1-chris@chris-wilson.co.uk
smatch correctly warns:
drivers/gpu/drm/drm_fb_helper.c:1960 drm_target_preferred() warn: should '1 << i' be a 64 bit type?
drivers/gpu/drm/drm_fb_helper.c:2001 drm_target_preferred() warn: should '1 << i' be a 64 bit type?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A drm driver that is implementing
fb_debug_enter and fb_debug_leave
in struct fb_ops with drm fb helper functions
drm_fb_helper_debug_enter and drm_fb_helper_debug_leave
must also implement the callback 'mode_set_base_atomic' in struct
drm_crtc_helper_funcs. See Documentation/DocBook/kgdb.tmpl. The current
implementation will segfault when 'mode_set_base_atomic' is a NULL
pointer.
Before this patch at least the drm drivers armada, ast, qxl, udl and
virtio do not have a 'mode_set_base_atomic' implementation but using
drm_fb_helper_debug_(enter|leave). So these drivers may segfault when
callbacks fb_debug_(enter|leave) are called.
Avoid the issue by just checking for NULL pointers. So all drivers can
unconditionally implement fb_debug_(enter|leave) with the drm_fb_helper
functions. If callback 'mode_set_base_atomic' is not implemented, the
code in drm_fb_helper_debug_(enter|leave) does effectively nothing.
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-2-git-send-email-contact@stefanchrist.eu
