With 4.13 kernel I get this boot message:
[ 1.051727] ------------[ cut here ]------------
[ 1.051818] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74
[ 1.051849] sysfs: cannot create duplicate filename '/devices/platform/omap_hsmmc.2'
[ 1.051879] Modules linked in:
[ 1.051971] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-letux+ #1360
[ 1.052001] Hardware name: Generic OMAP3 (Flattened Device Tree)
[ 1.052062] [<c010f690>] (unwind_backtrace) from [<c010bba8>] (show_stack+0x10/0x14)
[ 1.052124] [<c010bba8>] (show_stack) from [<c075dc88>] (dump_stack+0x98/0xd0)
[ 1.052185] [<c075dc88>] (dump_stack) from [<c012f398>] (__warn+0xd0/0x100)
[ 1.052215] [<c012f398>] (__warn) from [<c012f3fc>] (warn_slowpath_fmt+0x34/0x44)
[ 1.052276] [<c012f3fc>] (warn_slowpath_fmt) from [<c02ebcb4>] (sysfs_warn_dup+0x54/0x74)
[ 1.052337] [<c02ebcb4>] (sysfs_warn_dup) from [<c02ebd90>] (sysfs_create_dir_ns+0x74/0x84)
[ 1.052398] [<c02ebd90>] (sysfs_create_dir_ns) from [<c0761b8c>] (kobject_add_internal+0xd0/0x294)
[ 1.052429] [<c0761b8c>] (kobject_add_internal) from [<c0761f00>] (kobject_add+0x6c/0x8c)
[ 1.052490] [<c0761f00>] (kobject_add) from [<c04e831c>] (device_add+0xe4/0x510)
[ 1.052551] [<c04e831c>] (device_add) from [<c04ec6e4>] (platform_device_add+0x130/0x1c0)
[ 1.052612] [<c04ec6e4>] (platform_device_add) from [<c01281c0>] (omap_hsmmc_late_init+0x3c/0x60)
[ 1.052673] [<c01281c0>] (omap_hsmmc_late_init) from [<c0b0fa44>] (omap3_pandora_legacy_init+0x24/0xb4)
[ 1.052734] [<c0b0fa44>] (omap3_pandora_legacy_init) from [<c0128178>] (pdata_quirks_check+0x30/0x3c)
[ 1.052795] [<c0128178>] (pdata_quirks_check) from [<c0b0f950>] (omap_generic_init+0xc/0x18)
[ 1.052856] [<c0b0f950>] (omap_generic_init) from [<c0b03480>] (customize_machine+0x1c/0x28)
[ 1.052917] [<c0b03480>] (customize_machine) from [<c0101938>] (do_one_initcall+0xa8/0x150)
[ 1.052947] [<c0101938>] (do_one_initcall) from [<c0b00d70>] (kernel_init_freeable+0x110/0x1d4)
[ 1.053009] [<c0b00d70>] (kernel_init_freeable) from [<c076f198>] (kernel_init+0x8/0x10c)
[ 1.053070] [<c076f198>] (kernel_init) from [<c01070f0>] (ret_from_fork+0x14/0x24)
[ 1.055023] ---[ end trace 44e490b09ac4ab88 ]---
This can be traced down to the calls of
omap_hsmmc_init(pandora_mmc3);
omap_hsmmc_late_init(pandora_mmc3);
in omap3_pandora_legacy_init().
It turns out that both funcions disagree how to decide if the other one was alredy called.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gpio1 soft reset fails in the kexec path as the optional clock
is not enabled hence enable the HWMOD_CONTROL_OPT_CLKS_IN_RESET
flag for gpio1 hwmod.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM updates from Russell King:
"Low priority fixes and updates for ARM:
- add some missing includes
- efficiency improvements in system call entry code when tracing is
enabled
- ensure ARMv6+ is always built as EABI
- export save_stack_trace_tsk()
- fix fatal signal handling during mm fault
- build translation table base address register from scratch
- appropriately align the .data section to a word boundary where we
rely on that data being word aligned"
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8691/1: Export save_stack_trace_tsk()
ARM: 8692/1: mm: abort uaccess retries upon fatal signal
ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup
ARM: align .data section
ARM: always enable AEABI for ARMv6+
ARM: avoid saving and restoring registers unnecessarily
ARM: move PC value into r9
ARM: obtain thread info structure later
ARM: use aliases for registers in entry-common
ARM: 8689/1: scu: add missing errno include
ARM: 8688/1: pm: add missing types include
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
Pull MFD updates from Lee Jones:
"New Drivers
- RK805 Power Management IC (PMIC)
- ROHM BD9571MWV-M MFD Power Management IC (PMIC)
- Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
New Device Support:
- Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
- Add support for X-Powers AXP806 to axp20x
- Add support for X-Powers AXP813 to axp20x
- Add support for Intel Sunrise Point LPSS to intel-lpss-pci
New Functionality:
- Amend API to provide register layout; atmel-smc
Fix-ups:
- DT re-work; omap, nokia
- Header file location change {I2C => MFD}; dm355evm_msp, tps65010
- Fix chip ID formatting issue(s); rk808
- Optionally register touchscreen devices; da9052-core
- Documentation improvements; twl-core
- Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
- Drop unnecessary static declaration; max8925-i2c
- Kconfig changes (missing deps and remove module support)
- Slim down oversized licence statement; hi6421-pmic-core
- Use managed resources (devm_*); lp87565
- Supply proper error checking/handling; t7l66xb
Bug Fixes:
- Fix counter duplication issue; da9052-core
- Fix potential NULL deference issue; max8998
- Leave SPI-NOR write-protection bit alone; lpc_ich
- Ensure device is put into reset during suspend; intel-lpss
- Correct register offset variable size; omap-usb-tll"
* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
dt-bindings: mfd: Add bindings for ZII RAVE devices
mfd: omap-usb-tll: Fix register offsets
mfd: da9052: Constify spi_device_id
mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
mfd: da9055: Constify i2c_device_id
mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
mfd: t7l66xb: Handle return value of clk_prepare_enable
mfd: Add ROHM BD9571MWV-M PMIC DT bindings
mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
mfd: lp87565: Convert to use devm_mfd_add_devices()
mfd: Add support for TPS68470 device
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
mfd: syscon: atmel-smc: Add helper to retrieve register layout
mfd: axp20x: Use correct platform device ID for many PEK
dt-bindings: mfd: axp20x: Introduce bindings for AXP813
mfd: axp20x: Add support for AXP813 PMIC
dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
mfd: Add ROHM BD9571MWV-M MFD PMIC driver
...
The function that was added doesn't actually build:
arch/arm/mach-omap2/display.c: In function 'omapdss_init_fbdev':
arch/arm/mach-omap2/display.c:184:2: error: 'r' undeclared (first use in this function)
This adds a declaration for 'r' to fix it.
Fixes: 5ce783025c ("ARM: OMAP2+: Don't register omapdss device for omapdrm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Pull "non-urgent fixes for omaps for v4.14" from Tony Lindgren:
Non-urgent fixes for omaps for v4.14 merge window. These all
can wait for the merge window as we have not seemed to hit
any of these so far:
- Fix error handling in omap_ocp2scp_probe affecting runtime
PM error path
- Drop broken RPM status update for omap_device
- Two fixes for of_irq_get() usage that can return 0
* tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: PRM: fix of_irq_get() result checks
ARM: OMAP3+: PRM: fix of_irq_get() result check
ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq
bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe
Pull "soc changes for omaps for v4.14" from Tony Lindgren:
SoC updates for omaps for v4.14. Most of the chages are to add
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.
* tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomains
ARM: dra762: Enable SMP for dra762
ARM: dra7: hwmod: Register dra76x specific hwmod
ARM: dra762: Add support for device identification
ARM: OMAP2+: board-generic: add support for dra762 family
ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XX
ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM
ARM: OMAP2+: Remove unused legacy code for DMA
The omapdrm driver doesn't need the omapdss device anymore. Although it
can't be removed completely as the fbdev driver still requires it, we
can condition its registration to the usage of the omapfb driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
of_irq_get() may return 0 as well as a nagative error number on failure,
(and never on success), however omap44xx_prm_late_init() regards 0 as a
valid IRQ -- fix this.
Fixes: a8f83aefcd ("ARM: OMAP4+: PRM: register interrupt information from DT")
Fixes: c5b3955828 ("ARM: OMAP4: Fix legacy code clean-up regression")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
of_irq_get() may return 0 as well as a nagative error number on failure
(and never on success), however omap3xxx_prm_late_init() regards 0 as a
valid IRQ -- fix this.
Fixes: 1e037794f7 ("ARM: OMAP3+: PRM: register interrupt information from DT")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
SoC device attributes are registered with a call to
soc_device_register() from the machine .init_late() operation, which is
called from the late initcall, after all drivers built-in drivers have
been probed. This results in the impossibility for drivers to use SoC
device matching in their probe function.
The omap_soc_device_init() function is safe to call from the machine
.init() operation, as all data it depends on is initialized from the
.init_early() operation. Move SoC device attribute registration to
machine .init() like on all other ARM platforms.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Custom efuse powerdomain is always on in dra72 ES2.0
and dra76 SoCs. So register it as aon for these SoCs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
smp specific routines are called based on soc_is_*() api in omap-smc.c.
Add soc_is_dra76x() to the condition so that smp specific routines are
called for dra76 SoC.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Certain IPs are available on dra76 which are not present
either in dra74 or dra72. So add provision to register dra76
specific IPs separately.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Robert Jarzmik reports that his PXA25x system fails to boot with 4.12,
failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215:
0xc0019e20 <+0>: ldr r1, [pc, #788]
0xc0019e24 <+4>: ldr r0, [r1] <== here
with r1 containing 0xc06f82cd, which is the address of "clean_addr".
Examination of the System.map shows:
c06f22c8 D user_pmd_table
c06f22cc d __warned.19178
c06f22cd d clean_addr
indicating that a .data.unlikely section has appeared just before the
.data section from proc-xscale.S. According to objdump -h, it appears
that our assembly files default their .data alignment to 2**0, which
is bad news if the preceding .data section size is not power-of-2
aligned at link time.
Add the appropriate .align directives to all assembly files in arch/arm
that are missing them where we require an appropriate alignment.
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
PINCTRL_TI_IODELAY should be enabled so that "pinctrl_dev" can be created
for pinctrl entries populated with iodelay values in device tree data.
Select PINCTRL_TI_IODELAY for SOC_DRA7XX here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DRA74x EVM Rev H EVM comes with revision 2.0 silicon.
However, earlier versions of EVM can come with either
revision 1.1 or revision 1.0 of silicon.
The device-tree file is written to support rev 2.0 of
silicon. pdata quirks are used to then override the
settings needed for PG 1.1 silicon.
PG 1.1 silicon has limitations w.r.t frequencies at
which MMC1/2/3 can operate as well as different IOdelay
numbers.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Let's leave the dummy omap2_system_dma_init_dev() check
in place for now to avoid a pointless merge conflict with
tusb6010 dmaengine conversion as pointed out by Peter
Ujfalusi <peter.ujfalusi@ti.com>.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since commit a8636c8964 ("PM / Runtime: Don't allow to suspend a
device with an active child"), which went into 4.10, it is no longer
permitted to set RPM_SUSPENDED state for a device with active children
(unless power.ignore_children is set).
This specifically means that the attempts to do just that from the omap
pm-domain suspend_noirq callback have since been failing whenever a
child is active, for example:
am335x-usb-childs 47400000.usb: runtime PM trying to suspend
device but active child
Silence this warning by dropping the broken pm_runtime_set_suspended()
call from the omap suspend_noirq callback along with the redundant
pm_runtime_set_active() in resume_noirq.
This effectively reverts commit 3522bf7bfa ("ARM: OMAP2+: omap_device:
maintain sane runtime pm status around suspend/resume"), which started
updating the RPM state after the runtime_suspend callback (!) for active
omap devices had been called during system suspend. The rationale was
that a later pm_runtime_get_sync() would then fail (even after runtime
pm had been disabled) and that this in turn would avoid any external
aborts when accessing registers with clocks disabled. (See also commit
6f3c77b040 ("PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE,
even when disabled, v2").
But during the suspend_noirq phase all children would already have been
suspended and their drivers would specifically not attempt any further
register accesses. And if this was all just a workaround for random
device drivers doing cross-tree calls during system suspend, those
drivers should be fixed and updated to explicitly model such
dependencies using device-links instead (and either way, any such calls
have been causing crashes since 4.10).
Fixes: 3522bf7bfa ("ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume")
Fixes: a8636c8964 ("PM / Runtime: Don't allow to suspend a device with an active child")
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM SoC fixes from Arnd Bergmann:
"This comes a bit later than I planned, and as a consequence is a
larger than it should be.
Most of the changes are devicetree fixes, across lots of platforms:
Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic
Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci.
Also across many platforms, I applied an older series of simple
randconfig build fixes. This includes making the CONFIG_MTD_XIP option
compile again, which had been broken for many years and probably has
not been missed, but it felt wrong to just remove it completely.
The only other changes are:
- We enable HWSPINLOCK in defconfig to get some Qualcomm boards to
work out of the box.
- A few regression fixes for Texas Instruments OMAP2+.
- A boot regression fix for the Renesas regulator quirk.
- A suspend/resume fix for Uniphier SoCs, fixing the resume of the
system bus"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: dts: tango4: Request RGMII RX and TX clock delays
bus: uniphier-system-bus: set up registers when resuming
ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge
ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk
arm64: defconfig: enable missing HWSPINLOCK
ARM: pxa: select both FB and FB_W100 for eseries
ARM: ixp4xx: fix ioport_unmap definition
ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly
ARM: mmp: mark usb_dma_mask as __maybe_unused
ARM: omap2: mark unused functions as __maybe_unused
ARM: omap1: avoid unused variable warning
ARM: sirf: mark sirfsoc_init_late as __maybe_unused
ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l}
ARM: omap1/ams-delta: warn about failed regulator enable
ARM: rpc: rename RAM_SIZE macro
ARM: w90x900: normalize clk API
ARM: ep93xx: normalize clk API
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
...
The omap_generic_init() and omap_hwmod_init_postsetup() functions are
used in the initialization for all OMAP2+ SoC types, but in the
extreme case that those are all disabled, we get a warning about
unused code:
arch/arm/mach-omap2/io.c:412:123: error: 'omap_hwmod_init_postsetup' defined but not used [-Werror=unused-function]
arch/arm/mach-omap2/board-generic.c:30:123: error: 'omap_generic_init' defined but not used [-Werror=unused-function]
This annotates both as __maybe_unused to shut up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Pull "Few fixes for omaps for issues found recently" from Tony Lindgren:
- Fix disable_irq related shared IRQ warnings for omap3 PRM
- Fix omap4 legacy code regression that accidentally removed code that
we still need for PRM interrupts
- Fix dm8168-evm NAND pins and MMC write protect pin direction
- Fix dra71-evm mdio impedance values
* tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra71-evm: mdio: Fix impedance values
ARM: dts: dm816x: Correct the state of the write protect pin
ARM: dts: dm816x: Correct NAND support nodes
ARM: OMAP4: Fix legacy code clean-up regression
ARM: OMAP2+: Fix omap3 prm shared irq
Most platforms using OMAP hsmmc driver have switched to device tree
for passing platform data to omap_hsmmc.c driver.
The hsmmc.c file in mach-omap2 exists only to support pandora board
which uses wl1251 driver in legacy platform data mode.
Hence, remove the dead code not used by the pandora board.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull ARM SoC platform updates from Arnd Bergmann:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
- Andres Färber adds initial support for the Actions Semi S500 (aka
'owl') platform, a close relative of the S900 platform he adds for
arm64.
- in mach-omap2, we remove more legacy code
- Rockchips gains support for the RV1108 SoC designed for camera
applications.
- For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
- Minor updates for other platforms, including davinci, s3c64xx,
prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
ARM: owl: smp: Drop bogus holding pen
ARM: owl: Drop custom machine
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
MAINTAINERS: Update Actions Semi section with SPS
ARM: owl: Implement CPU enable-method for S500
MAINTAINERS: Add Actions Semi Owl section
ARM: Prepare Actions Semi S500
ARM: socfpga: Increase max number of GPIOs
ARM: stm32: Introduce MACH_STM32F469 flag
ARM: prima2: remove redundant select CPU_V7
ARM: davinci: fix const warnings
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
...
Pull USB/PHY updates from Greg KH:
"Here is the big patchset of USB and PHY driver updates for 4.13-rc1.
On the PHY side, they decided to move files around to "make things
easier" in their tree. Hopefully that wasn't a mistake, but in
linux-next testing, we haven't had any reported problems.
There's the usual set of gadget and xhci and musb updates in here as
well, along with a number of smaller updates for a raft of different
USB drivers. Full details in the shortlog, nothing really major.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits)
Add USB quirk for HVR-950q to avoid intermittent device resets
USB hub_probe: rework ugly goto-into-compound-statement
usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
usbip: Fix uninitialized variable bug in vhci
usb: core: read USB ports from DT in the usbport LED trigger driver
dt-bindings: leds: document new trigger-sources property
usb: typec: ucsi: Add ACPI driver
usb: typec: Add support for UCSI interface
usb: musb: compress return logic into one line
USB: serial: propagate late probe errors
USB: serial: refactor port endpoint setup
usb: musb: tusb6010_omap: Convert to DMAengine API
ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
usb: musb: tusb6010_omap: Allocate DMA channels upfront
usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
usb: musb: Add quirk to avoid skb reserve in gadget mode
...
Commit 2a26d31b1b ("ARM: OMAP2+: Remove unused legacy code for PRM")
removed PRM platform init code that I thought is unused. Turns out omap4
still needs this code, so let's do a partial revert to add it back.
I probably missed this earlier as the comments used to say
"OMAP4+ is DT only now" for !of_have_populated_dt() to exit early and
missed the negative test. Let's not add those lines back as they are
confusing and no longer needed as we only boot in device tree mode.
Without things things can mysterious fail for i2c, for example LM75
I2C temperature sensor can stop working as the PRM interrupts won't work.
Fixes: 2a26d31b1b ("ARM: OMAP2+: Remove unused legacy code for PRM")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Shared interrupts with IRQ_NOAUTOEN got a warning added with commit
04c848d398 ("genirq: Warn when IRQ_NOAUTOEN is used with shared
interrupts").
Let's just drop the IRQ_NOAUTOEN use for omap3 PRM shared interrupt as
it does not seem to cause any other issues based on my testing. We have
moved a lot of the code to initialize later, and whatever problems the
legacy booting had seem to be gone now with pinctrl driver and device
tree based booting.
Otherwise we will get:
WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1348 __setup_irq+0x5d0/0x64c
[<c01b0260>] (__setup_irq) from [<c01b0480>]
(request_threaded_irq+0xdc/0x188)
[<c01b0480>] (request_threaded_irq) from [<c051c780>]
(pcs_probe+0x6ec/0x8a4)
[<c051c780>] (pcs_probe) from [<c05a84b8>] (platform_drv_probe+0x50/0xb0)
[<c05a84b8>] (platform_drv_probe) from [<c05a6288>]
(driver_probe_device+0x33c/0x478)
Note that we also need to remove the related enable_irq() to avoid
getting the following:
WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:529 enable_irq+0x34/0x70
[<c01afa04>] (enable_irq) from [<c0c0f1fc>] (omap3_pm_init+0x118/0x3f8)
[<c0c0f1fc>] (omap3_pm_init) from [<c0c0ae7c>] (am35xx_init_late+0x10/0x18)
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The external request lines are used by tusb6010 on OMAP24xx platforms.
Update the map so the driver can use dmaengine API to request the DMA
channel. At the same time add temporary map containing only the external
DMA request numbers for DT booted case on omap24xx since the tusb6010 stack
is not yet supports DT boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SoC changes for omap variants for v4.13 merge window:
- PM clean-up in preparation of adding am335x/am437x PM support
- Fixes for issues found by Coccinelle
- Legacy code removal now that everything boots in device
tree only mode
- Interconnect changes in preparation of moving clkctrl clocks
to be managed by clkctrl clock driver
- Interconnect changes to add omap4 crypto acceclerator
support
* tag 'omap-for-v4.13/soc-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: OMAP2+: Remove unused legacy code for n8x0
ARM: OMAP2+: Remove unused legacy code for watchdog
ARM: OMAP2+: Remove unused legacy code for interconnects
ARM: OMAP2+: Remove unused legacy code for PRM
ARM: OMAP2+: Remove unused legacy code for io.c
ARM: OMAP2+: Remove unused legacy code for McBSP
ARM: OMAP2+: SmartReflex: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Use kcalloc() in sr_set_nvalues()
ARM: OMAP2+: Improve a size determination in sr_dev_init()
ARM: OMAP2+: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Remove unused legacy code for device init
ARM: OMAP2+: Remove unused legacy code for PMU
ARM: OMAP2+: Remove unused legacy code for opp
ARM: OMAP2+: hwmod: populate clkctrl clocks for hwmods if available
ARM: OMAP4: cminst: add support for clkdm_xlate_address
ARM: omap2+: clockdomain: add clkdm_xlate_address
...
Signed-off-by: Olof Johansson <olof@lixom.net>
OMAP4 SoC contains SHAM crypto hardware accelerator. Add hwmod data for
this IP so that it can be utilized by crypto frameworks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This fixes the following error during kernel boot:
platform 480a5000.des: Cannot lookup hwmod 'des'
Unfortunately the DES module is only documented partly
in the OMAP4430 TRM. I found an old patch from Joel,
which I took over and updated for currently mainline.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This fixes the following error during kernel boot:
platform 4b501000.aes: Cannot lookup hwmod 'aes1'
Unfortunately the AES module is only documented partly
in the OMAP4430 TRM. I found an old patch from Joel,
which I took over and updated for currently mainline.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
[tony@atomide.com: left out probe changes to avoid merge conflict]
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
