Joachim Eastwood
7eef558768
ARM: dts: lpc4357-ea4357: add i2c0 and devices
...
Add I2C0 and some of the I2C devices on the EA4357 dev kit.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
2015-09-30 22:49:00 +02:00
Joachim Eastwood
09d039971b
ARM: dts: lpc4357-ea4357: add ssp0
...
The SSP0 can be found on the EA4357 Dev Kit on J15 pin 3-6.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
2015-09-30 22:49:00 +02:00
Joachim Eastwood
f359348b1b
ARM: dts: lpc4357-ea4357: add spifi and flash device
...
The EA4357 dev kit has a Spansion S25FL016K SPI-NOR Flash connected
to the SPIFI perherial.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
2015-09-30 22:48:59 +02:00
Joachim Eastwood
41a0dec916
ARM: dts: lpc4357-ea4357: add mmio-gpio leds
...
Hook up LEDs on the outputs from the D-type flip-flop found on
the address/data bus.
Note that the LEDx label in the schematics is reversed in regard
to the bits on the data bus. Hence the reverse ordering used here.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
Signed-off-by: Olof Johansson <olof@lixom.net >
2015-08-05 19:30:24 +02:00
Joachim Eastwood
3c6abb97f3
ARM: dts: lpc4357-ea4357: add emc pins and static memory devices
...
Setup the emc pins used by external memory devices and add
configuration for the devices found on the EA4357 devkit.
The EA4357 devkit has a NOR Flash attached to chip select 0
and a D-type flip-flop used for LEDs on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
Signed-off-by: Olof Johansson <olof@lixom.net >
2015-08-05 19:30:20 +02:00
Joachim Eastwood
fd0cb235df
ARM: dts: lpc4357-ea4357: add usb0
...
Enable USB0 on the EA4357 devkit and setup the required USB0
control pins.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
Signed-off-by: Olof Johansson <olof@lixom.net >
2015-08-05 19:30:18 +02:00
Joachim Eastwood
930a43e2e6
ARM: dts: lpc4357-ea4357: add uart3
...
Enable UART3 that is routed to the J17 DSUB9 connector on
the EA4357 devkit.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
2015-07-14 15:12:10 +02:00
Joachim Eastwood
7de98f2a98
ARM: dts: lpc4357-ea4357: add ethernet
...
Enable Ethernet and add pin muxing and set the correct
frequency on the enet tx clock input.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
2015-07-14 15:12:10 +02:00
Joachim Eastwood
95dafb2ca1
ARM: dts: lpc4357-ea4357: add gpio joystick
...
Hook up the small joystick found on the EA4357 devkit.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
2015-07-14 15:12:09 +02:00
Joachim Eastwood
bfd0b498be
ARM: dts: lpc4357-ea4357: add mmcsd
...
Enable the MMC/SD controller on EA4357 devkit and add pin
muxing plus a regulator.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
2015-07-11 23:08:19 +02:00
Joachim Eastwood
c97a63c9de
ARM: dts: lpc4357-ea4357: add pinctrl and uart0 muxing
...
Setup pin muxing and properties for the debug console on uart0.
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
Acked-by: Linus Walleij <linus.walleij@linaro.org >
2015-07-11 23:06:53 +02:00
Joachim Eastwood
56bd3771e6
ARM: dts: Add DT for Embedded Artists LPC4357 Developers Kit
...
Adds basic support for Embedded Artists' LPC4357 Developer's Kit. Board
features a LPC4357 Soc, 32 MB SDRAM, 128 MB NAND Flash, 16 MB SPI
Flash, USB and Ethernet.
More information can be found on:
http://www.embeddedartists.com/products/kits/lpc4357_kit.php
Signed-off-by: Joachim Eastwood <manabian@gmail.com >
Signed-off-by: Arnd Bergmann <arnd@arndb.de >
2015-05-15 22:28:21 +02:00
