Haswell also requires the RING_IMR flush for its unique vebox setup to
avoid losing interrupts, as per 476af9c260 ("drm/i915/gen6: Flush
RING_IMR changes before changing the global GT IMR"):
On Baytail, notably, we can still detect missed interrupt syndrome
(where we never spot a completed request). In this case, it can be
alleviated by always keeping the interrupt unmasked, implying that the
interrupt is being lost in the window after modifying the IMR. (This is
the reason we still have the posting reads on enable_irq, if we remove
them we miss interrupts!) Having narrowed the issue down to the IMR,
rather than keeping it always enabled, applying the usual posting
read/flush of the RING_IMR before unmasking the GT IMR also seems to
prevent the missed interrupt. So be it.
References: 476af9c260 ("drm/i915/gen6: Flush RING_IMR changes before changing the global GT IMR")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105115647.4970-1-chris@chris-wilson.co.uk
On Baytail, notably, we can still detect missed interrupt syndrome
(where we never spot a completed request). In this case, it can be
alleviated by always keeping the interrupt unmasked, implying that the
interrupt is being lost in the window after modifying the IMR. (This is
the reason we still have the posting reads on enable_irq, if we remove
them we miss interrupts!) Having narrowed the issue down to the IMR,
rather than keeping it always enabled, applying the usual posting
read/flush of the RING_IMR before unmasking the GT IMR also seems to
prevent the missed interrupt. So be it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190102163524.19353-1-chris@chris-wilson.co.uk
The irq_seqno_barrier is a tradeoff between doing work on every request
(on the GPU) and doing work after every interrupt (on the CPU). We
presume we have many more requests than interrupts! However, for
Ironlake, the workaround is a pretty hideous usleep() and so even though
it was found we need to repeat the MI_STORE_DWORD_IMM 8 times, or about
1us of GPU time, doing so is preferrable than requiring a sleep of
125-250us on the CPU where we desire to respond immediately (ideally from
within the interrupt handler)!
The additional MI_STORE_DWORD_IMM also have the side-effect of flushing
MI operations from userspace which are not caught by MI_FLUSH!
Testcase: igt/gem_sync
Testcase: igt/gem_exec_whisper
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-5-chris@chris-wilson.co.uk
The irq_seqno_barrier is a tradeoff between doing work on every request
(on the GPU) and doing work after every interrupt (on the CPU). We
presume we have many more requests than interrupts! However, the current
w/a for Ivybridge is an implicit delay that currently fails sporadically
and consistently if we move the w/a into the irq handler itself. This
makes the CPU barrier untenable for upcoming interrupt handler changes
and so we need to replace it with a delay on the GPU before we send the
MI_USER_INTERRUPT. As it turns out that delay is 32x MI_STORE_DWORD_IMM,
or about 0.6us per request! Quite nasty, but the lesser of two evils
looking to the future.
Testcase: igt/gem_sync
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-4-chris@chris-wilson.co.uk
Having transitioned to using PIPECONTROL to combine the flush with the
breadcrumb write using their post-sync functions, assume that this will
resolve the serialisation with the subsequent MI_USER_INTERRUPT. That is
when inspecting the breadcrumb after an interrupt we can rely on the write
being posted (i.e. the HWSP will be coherent).
Testing using gem_sync shows that the PIPECONTROL + CS stall does
serialise the command streamer sufficient that the breadcrumb lands
before the MI_USER_INTERRUPT. The same is not true for MI_FLUSH_DW.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-2-chris@chris-wilson.co.uk
In preparation for removing the manual EMIT_FLUSH prior to emitting the
breadcrumb implement the flush inline with writing the breadcrumb for
ringbuffer emission.
With a combined flush+breadcrumb, we can use a single operation to both
flush and after the flush is complete (post-sync) write the breadcrumb.
This gives us a strongly ordered operation that should be sufficient to
serialise the write before we emit the interrupt; and therefore we may
take the opportunity to remove the irq_seqno_barrier w/a for gen6+.
Although using the PIPECONTROL to write the breadcrumb is slower than
MI_STORE_DWORD_IMM, by combining the operations into one and removing the
extra flush (next patch) it is faster
For gen2-5, we simply combine the MI_FLUSH into the breadcrumb emission,
though maybe we could find a solution here to the seqno-vs-interrupt
issue on Ironlake by mixing up the flush? The answer is no, adding an
MI_FLUSH before the interrupt is insufficient.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228153114.4948-2-chris@chris-wilson.co.uk
The writing is on the wall for the existence of a single execution queue
along each engine, and as a consequence we will not be able to track
dependencies along the HW queue itself, i.e. we will not be able to use
HW semaphores on gen7 as they use a global set of registers (and unlike
gen8+ we can not effectively target memory to keep per-context seqno and
dependencies).
On the positive side, when we implement request reordering for gen7 we
also can not presume a simple execution queue and would also require
removing the current semaphore generation code. So this bring us another
step closer to request reordering for ringbuffer submission!
The negative side is that using interrupts to drive inter-engine
synchronisation is much slower (4us -> 15us to do a nop on each of the 3
engines on ivb). This is much better than it was at the time of introducing
the HW semaphores and equally important userspace weaned itself off
intermixing dependent BLT/RENDER operations (the prime culprit was glyph
rendering in UXA). So while we regress the microbenchmarks, it should not
impact the user.
References: https://bugs.freedesktop.org/show_bug.cgi?id=108888
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228140736.32606-2-chris@chris-wilson.co.uk
After we found a workaround for a hang on context load, Ben Widawsky
found confirmation that it was for an issue with waking from rc6 and
loading a context image.
The workaround from on high suggests that we should
I915_WRITE(RING_WAIT_FOR_RC6_EXIT(engine->mmio_base),
_MASKED_FIELD(RING_RC6_SEL_WRITE_ADDR_MASK,
RING_RC6_SEL_WRITE_ADDR_UPPER_LEFT));
in our rc6 setup for Haswell GT1, but on applying that we find instead
that the machine encounters a GT forcewake error and locks up.
As we are removing HW semaphore usage in the next patch, and the
suggested workaround is no improvement, we need to
decouple the PSMI workaround from HAS_SEMAPHORES to IS_HSW_GT1.
References: 2c55018347 ("drm/i915: Disable PSMI sleep messages on all rings around context switches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228140736.32606-1-chris@chris-wilson.co.uk
Having completed a test run of gem_eio across all machines in CI we also
observe the phenomenon (of lost interrupts after resetting the GPU) on
gen3 machines as well as the previously sighted gen6/gen7. Let's apply
the same HWSTAM workaround that was effective for gen6+ for all, as
although we haven't seen the same failure on gen4/5 it seems prudent to
keep the code the same.
As a consequence we can remove the extra setting of HWSTAM and apply the
register from a single site.
v2: Delazy and move the HWSTAM into its own function
v3: Mask off all HWSP writes on driver unload and engine cleanup.
v4: And what about the physical hwsp?
v5: No, engine->init_hw() is not called from driver_init_hw(), don't be
daft. Really scrub HWSTAM as early as we can in driver_init_mmio()
v6: Rename set_hwsp as it was setting the mask not the hwsp register.
v7: Ville pointed out that although vcs(bsd) was introduced for g4x/ilk,
per-engine HWSTAM was not introduced until gen6!
References: https://bugs.freedesktop.org/show_bug.cgi?id=108735
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181218102712.11058-1-chris@chris-wilson.co.uk
Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of
gen_mask to do the comparison. Now callers can pass then gen as a parameter,
so we don't require one macro for each gen.
The following spatch was used to convert the users of these macros:
@@
expression e;
@@
(
- IS_GEN2(e)
+ IS_GEN(e, 2)
|
- IS_GEN3(e)
+ IS_GEN(e, 3)
|
- IS_GEN4(e)
+ IS_GEN(e, 4)
|
- IS_GEN5(e)
+ IS_GEN(e, 5)
|
- IS_GEN6(e)
+ IS_GEN(e, 6)
|
- IS_GEN7(e)
+ IS_GEN(e, 7)
|
- IS_GEN8(e)
+ IS_GEN(e, 8)
|
- IS_GEN9(e)
+ IS_GEN(e, 9)
|
- IS_GEN10(e)
+ IS_GEN(e, 10)
|
- IS_GEN11(e)
+ IS_GEN(e, 11)
)
v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than
using the bitmask
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3
was good, but still not good enough. To survive 24+ hours under test we
needed to perform not one, not two but three extra store-dw. Doing so
for each GPU relocation was a little unsightly and since we need to
worry about userspace hitting the same issues, we should apply the dummy
store-dw into the EMIT_FLUSH.
Fixes: 7dd4f6729f ("drm/i915: Async GPU relocation processing")
References: 7fa28e1469 ("drm/i915: Write GPU relocs harder with gen3")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk
Convert the per context workaround handling code to run against the newly
introduced common workaround framework and fuse the two to use the
existing smarter list add helper, the one which does the sorted insert and
merges registers where possible.
This completes migration of all four classes of workarounds onto the
common framework.
Existing macros are kept untouched for smaller code churn.
v2:
* Rename to list name ctx_wa_list and move from dev_priv to engine.
v3:
* API rename and parameters tweaking. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133357.10341-1-tvrtko.ursulin@linux.intel.com
Exercising the gpu reloc path strenuously revealed an issue where the
updated relocations (from MI_STORE_DWORD_IMM) were not being observed
upon execution. After some experiments with adding pipecontrols (a lot
of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe
controls or even the current on), it was discovered that we merely
needed to delay the EMIT_INVALIDATE by several flushes. It is important
to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that
needs the delay as opposed to what one might first expect -- that the
delay is required for the TLB invalidation to take effect (one presumes
to purge any CS buffers) as opposed to a delay after flushing to ensure
the writes have landed before triggering invalidation.
Testcase: igt/gem_tiled_fence_blits
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
Older gen use a physical address for the hardware status page, for which
we use cache-coherent writes. As the writes are into the cpu cache, we use
a normal WB mapped page to read the HWS, used for our seqno tracking.
Anecdotally, I observed lost breadcrumbs writes into the HWS on i965gm,
which so far have not reoccurred with this patch. How reliable that
evidence is remains to be seen.
v2: Explicitly pass the expected physical address to the hw
v3: Also remember the wild writes we once had for HWS above 4G.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903152304.31589-2-chris@chris-wilson.co.uk
This reapplies commit 39f3be162c ("drm/i915: Kick waiters on resetting
legacy rings") after the improved gem_eio was run across all machines we
found that gen3 and early gen4 still lost the immediate interrupt
following reset, and the HWSTAM w/a applied to gen6+ is inadequate.
Unlike the later gen, on gen3/4 the principle (and only tests to fail so
far) are the wait vs reset test cases, whereas the reset stress case
works fine (which was the predominantly failing case for gen6+). That is
enough to suggest the underlying issue is sufficiently different to
support the difference in HWSTAM efficacy.
Testcase: igt/gem_eio/wait-10ms
References: 39f3be162c ("drm/i915: Kick waiters on resetting legacy rings")
References: a69ab52b03 ("drm/i915: Remove extra waiter kick on legacy resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180814104056.27001-1-chris@chris-wilson.co.uk
After disabling resource streamer on ICL (due to it actually not
existing there), I got feedback that there have been some experimental
patches for mesa to use RS years ago, but nothing ever landed or shipped
because there was no performance improvement.
This removes it from kernel keeping the uapi defines around for
compatibility.
v2: - re-add the inadvertent removal of CTX_CTRL_INHIBIT_SYN_CTX_SWITCH
- don't bother trying to document removed params on uapi header:
applications should know that from the query.
(from Chris)
v3: - disable CTX_CTRL_RS_CTX_ENABLE istead of removing it
- reword commit message after Daniele confirmed no performance
regression on his machine
- reword commit message to make clear RS is being removed due to
never been used
v4: - move I915_EXEC_RESOURCE_STREAMER to __I915_EXEC_ILLEGAL_FLAGS so
the check on ioctl() is made much earlier by
i915_gem_check_execbuffer() (suggested by Tvrtko)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803232443.17193-1-lucas.demarchi@intel.com
On GEM side:
- GuC related fixes (Chris, Michal)
- GTT read-only pages support (Jon, Chris)
- More selftests fixes (Chris)
- More GPU reset improvements (Chris)
- Flush caches after GGTT writes (Chris)
- Handle recursive shrinker for vma->last_active allocation (Chris)
- Other execlists fixes (Chris)
On Display side:
- GLK HDMI fix (Clint)
- Rework and cleanup around HPD pin (Ville)
- Preparation work for Display Stream Compression support coming on ICL (Anusha)
- Nuke LVDS lid notification (Ville)
- Assume eDP is always connected (Ville)
- Kill intel panel detection (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 20 Jul 2018 01:51:45 AM AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
# Conflicts:
# drivers/gpu/drm/i915/intel_lrc.c
Link: https://patchwork.freedesktop.org/patch/msgid/20180719171257.GA12199@intel.com
Higlights here goes to many PSR fixes and improvements; to the Ice lake work with
power well support and begin of DSI support addition. Also there were many improvements
on execlists and interrupts for minimal latency on command submission; and many fixes
on selftests, mostly caught by our CI.
General driver:
- Clean-up on aux irq (Lucas)
- Mark expected switch fall-through for dealing with static analysis tools (Gustavo)
Gem:
- Different fixes for GuC (Chris, Anusha, Michal)
- Avoid self-relocation BIAS if no relocation (Chris)
- Improve debugging cases in on EINVAL return and vma allocation (Chris)
- Fixes and improvements on context destroying and freeing (Chris)
- Wait for engines to idle before retiring (Chris)
- Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
- Many fixes in selftests, specially on cases highlighted on CI (Chris)
- Other fixes and improvements around GGTT (Chris)
- Prevent background reaping of active objects (Chris)
Display:
- Parallel modeset cleanup to fix driver reset (Chris)
- Get AUX power domain for DP main link (Imre)
- Clean-up on PSR unused func pointers (Rodrigo)
- Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
- Add a PSR1 live status (Vathsala)
- Replace old drm_*_{un/reference} with put,get functions (Thomas)
- FBC fixes (Maarten)
- Abstract and document the usage of picking macros (Jani)
- Remove unnecessary check for unsupported modifiers for NV12. (DK)
- Interrupt fixes for display (Ville)
- Clean up on sdvo code (Ville)
- Clean up on current DSI code (Jani)
- Remove support for legacy debugfs crc interface (Maarten)
- Simplify get_encoder_power_domains (Imre)
Icelake:
- MG PLL fixes (Imre)
- Add hw workaround for alpha blending (Vandita)
- Add power well support (Imre)
- Add Interrupt Support (Anusha)
- Start to add support for DSI on Ice Lake (Madhav)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 10 Jul 2018 08:41:37 AM AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180710234349.GA16562@intel.com
Across a reset, the seqno (and thus hangcheck) should restart and the
hangcheck naturally progress, for when it does not, we want to declare an
emergency. Currently, we only detect if reset and reinit fails, but we
do not detect if the call to reinit succeeds but the HW is fried - as we
are resetting hangcheck on initialisation the engine. Remove that and
rely on the natural progress to reset the hangcheck timer.
References: e21b141376 ("drm/i915: Mark the hangcheck as idle when unparking the engines")
References: 1fd00c0fae ("drm/i915: Declare the driver wedged if hangcheck makes no progress")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709130208.11730-2-chris@chris-wilson.co.uk
Chris is doing many reworks that allow us to get full-ppgtt supported
on all platforms back to HSW. As well many other fix and improvements,
Including:
- Use GEM suspend when aborting initialization (Chris)
- Change i915_gem_fault to return vm_fault_t (Chris)
- Expand VMA to Non gem object entities (Chris)
- Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris)
- Other page directory handling fixes and improvements for gen6 (Chris)
- Other gtt clean-up removing redundancies and unused checks (Chris)
- Reorder aliasing ppgtt fini (Chris)
- Refactor of unsetting obg->mm.pages (Chris)
- Apply batch location restrictions before pinning (Chris)
- Ringbuffer fixes for context restore (Chris)
- Execlist fixes on freeing error pointer on allocation error (Chris)
- Make closing request flush mandatory (Chris)
- Move GEM sanitize from resume_early to resume (Chris)
- Improve debug dumps (Chris)
- Silent compiler for selftest (Chris)
- Other execlists changes to improve hangcheck and reset.
- Many gtt page directory fixes and improvements (Chris)
- Reorg context workarounds (Chris)
- Avoid ERR_PTR dereference on selftest (Chris)
Other GEM related work:
- Stop trying to reset GPU if reset failed (Mika)
- Add HW workaround for KBL to fix GPU reset (Mika)
- Fix context ban and hang accounting for client (Mika)
- Fixes on OA perf (Michel, Jani)
- Refactor on GuC log mechanisms (Piotr)
- Enable provoking vertex fix on Gen9 system (Kenneth)
More ICL patches for Display enabling:
- ICL - 10-bit support for HDMI (RK)
- ICL - Start adding TBT PLL (Paulo)
- ICL - DDI HDMK level selection (Manasi)
- ICL - GMBUS GPIO pin mapping fix (Mahesh)
- ICL - Adding DP_AUX_E support (James)
- ICL - Display interrupts handling (DK)
Other display fixes and improvements:
- Fix sprite destination color keying on SKL+ (Ville)
- Fixes and improvements on PCH detection, specially for non PCH systems (Jani)
- Document PCH_NOP (Lucas)
- Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville)
- Opregion and ACPI cleanup and organization (Jani)
- Kill delays when activation psr (Rodrigo)
- ...and a consequent fix of the psr activation flow (DK)
- Fix HDMI infoframe setting (Imre)
- Fix Display interrupts and modes on old gens (Ville)
- Start switching to kernel unsigned int types (Jani)
- Introduction to Amber Lake and Whiskey Lake platforms (Jose)
- Audio clock fixes for HBR3 (RK)
- Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo)
- Remove unused timespec_to_jiffies_timeout function (Arnd)
- Increase the scope of PSR wake fix for other VBTs out there (Vathsala)
- Improve debug msgs with prop name/id (Ville)
- Other clean up on unecessary cursor size defines (Ville)
- Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville)
- Make ELD pointers constant (Jani)
- Fix for PSR VBT parse (Colin)
- Add warn about unsupported CDCLK rates (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 21 Jun 2018 07:12:10 AM AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180625165622.GA21761@intel.com
We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
commit b2209e62a4 ("drm/i915/execlists: Reset the CSB head tracking on
reset/sanitization") and commit 1288786b18 ("drm/i915: Move GEM sanitize
from resume_early to resume") show the conflicting requirements on the
code. We must reset the GPU before trashing live state on a fast resume
(hibernation debug, or error paths), but we must only reset our state
tracking iff the GPU is reset (or power cycled). This is tricky if we
are disabling GPU reset to simulate broken hardware; we reset our state
tracking but the GPU is left intact and recovers from its stale state.
v2: Again without the assertion for forcewake, no longer required since
commit b3ee09a4de ("drm/i915/ringbuffer: Fix context restore upon reset")
as the contexts are reset from the CS ensuring everything is powered up.
Fixes: b2209e62a4 ("drm/i915/execlists: Reset the CSB head tracking on reset/sanitization")
Fixes: 1288786b18 ("drm/i915: Move GEM sanitize from resume_early to resume")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616202534.18767-1-chris@chris-wilson.co.uk
