Pull MTD changes from Brian Norris:
- Unify some compile-time differences so that we have fewer uses of
#ifdef CONFIG_OF in atmel_nand
- Other general cleanups (removing unused functions, options,
variables, fields; use correct interfaces)
- Fix BUG() for new odd-sized NAND, which report non-power-of-2
dimensions via ONFI
- Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
- Improve differentiation between SLC and MLC NAND -- this clarifies an
ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
ioctl), where the MTD_MLCNANDFLASH type was present but
inconsistently used
- Extend GPMI NAND to support multi-chip-select NAND for some platforms
- Many improvements to the OMAP2/3 NAND driver, including an expanded
DT binding to bring us closer to mainline support for some OMAP
systems
- Fix a deadlock in the error path of the Atmel NAND driver probe
- Correct the error codes from MTD mmap() to conform to POSIX and the
Linux Programmer's Manual. This is an acknowledged change in the MTD
ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
error code specifically. Am I just being unimaginative? :)
- Fix a few important GPMI NAND bugs (one regression from 3.12 and one
long-standing race condition)
- More? Read the log!
* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
mtd: gpmi: fix the NULL pointer
mtd: gpmi: fix kernel BUG due to racing DMA operations
mtd: mtdchar: return expected errors on mmap() call
mtd: gpmi: only scan two chips for imx6
mtd: gpmi: Use devm_kzalloc()
mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
mtd: nand: use a local variable to simplify the nand_scan_tail
mtd: nand: remove deprecated IRQF_DISABLED
mtd: dataflash: Say if we find a device we don't support
mtd: nand: omap: fix error return code in omap_nand_probe()
mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
mtd: m25p80: fixup device removal failure path
mtd: mxc_nand: Include linux/of.h header
mtd: remove duplicated include from mtdcore.c
mtd: m25p80: add support for Macronix mx25l3255e
mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
mtd: nand: omap: updated devm_xx for all resource allocation and free calls
mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
...
Pull networking updates from David Miller:
1) The addition of nftables. No longer will we need protocol aware
firewall filtering modules, it can all live in userspace.
At the core of nftables is a, for lack of a better term, virtual
machine that executes byte codes to inspect packet or metadata
(arriving interface index, etc.) and make verdict decisions.
Besides support for loading packet contents and comparing them, the
interpreter supports lookups in various datastructures as
fundamental operations. For example sets are supports, and
therefore one could create a set of whitelist IP address entries
which have ACCEPT verdicts attached to them, and use the appropriate
byte codes to do such lookups.
Since the interpreted code is composed in userspace, userspace can
do things like optimize things before giving it to the kernel.
Another major improvement is the capability of atomically updating
portions of the ruleset. In the existing netfilter implementation,
one has to update the entire rule set in order to make a change and
this is very expensive.
Userspace tools exist to create nftables rules using existing
netfilter rule sets, but both kernel implementations will need to
co-exist for quite some time as we transition from the old to the
new stuff.
Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
worked so hard on this.
2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
to our pseudo-random number generator, mostly used for things like
UDP port randomization and netfitler, amongst other things.
In particular the taus88 generater is updated to taus113, and test
cases are added.
3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
and Yang Yingliang.
4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
Sujir.
5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
Neal Cardwell, and Yuchung Cheng.
6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
control message data, much like other socket option attributes.
From Francesco Fusco.
7) Allow applications to specify a cap on the rate computed
automatically by the kernel for pacing flows, via a new
SO_MAX_PACING_RATE socket option. From Eric Dumazet.
8) Make the initial autotuned send buffer sizing in TCP more closely
reflect actual needs, from Eric Dumazet.
9) Currently early socket demux only happens for TCP sockets, but we
can do it for connected UDP sockets too. Implementation from Shawn
Bohrer.
10) Refactor inet socket demux with the goal of improving hash demux
performance for listening sockets. With the main goals being able
to use RCU lookups on even request sockets, and eliminating the
listening lock contention. From Eric Dumazet.
11) The bonding layer has many demuxes in it's fast path, and an RCU
conversion was started back in 3.11, several changes here extend the
RCU usage to even more locations. From Ding Tianhong and Wang
Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
Falico.
12) Allow stackability of segmentation offloads to, in particular, allow
segmentation offloading over tunnels. From Eric Dumazet.
13) Significantly improve the handling of secret keys we input into the
various hash functions in the inet hashtables, TCP fast open, as
well as syncookies. From Hannes Frederic Sowa. The key fundamental
operation is "net_get_random_once()" which uses static keys.
Hannes even extended this to ipv4/ipv6 fragmentation handling and
our generic flow dissector.
14) The generic driver layer takes care now to set the driver data to
NULL on device removal, so it's no longer necessary for drivers to
explicitly set it to NULL any more. Many drivers have been cleaned
up in this way, from Jingoo Han.
15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.
16) Improve CRC32 interfaces and generic SKB checksum iterators so that
SCTP's checksumming can more cleanly be handled. Also from Daniel
Borkmann.
17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
using the interface MTU value. This helps avoid PMTU attacks,
particularly on DNS servers. From Hannes Frederic Sowa.
18) Use generic XPS for transmit queue steering rather than internal
(re-)implementation in virtio-net. From Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
random32: add test cases for taus113 implementation
random32: upgrade taus88 generator to taus113 from errata paper
random32: move rnd_state to linux/random.h
random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
random32: add periodic reseeding
random32: fix off-by-one in seeding requirement
PHY: Add RTL8201CP phy_driver to realtek
xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
macmace: add missing platform_set_drvdata() in mace_probe()
ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
ixgbe: add warning when max_vfs is out of range.
igb: Update link modes display in ethtool
netfilter: push reasm skb through instead of original frag skbs
ip6_output: fragment outgoing reassembled skb properly
MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
net_sched: tbf: support of 64bit rates
ixgbe: deleting dfwd stations out of order can cause null ptr deref
ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
...
Pull h8300 platform removal from Guenter Roeck:
"The patch series has been in -next for more than one relase cycle. I
did get a number of Acks, and no objections.
H8/300 has been dead for several years, the kernel for it has not
compiled for ages, and recent versions of gcc for it are broken.
Remove support for it"
* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
CREDITS: Add Yoshinori Sato for h8300
fs/minix: Drop dependency on H8300
Drop remaining references to H8/300 architecture
Drop MAINTAINERS entry for H8/300
watchdog: Drop references to H8300 architecture
net/ethernet: Drop H8/300 Ethernet driver
net/ethernet: smsc9194: Drop conditional code for H8/300
ide: Drop H8/300 driver
Drop support for Renesas H8/300 (h8300) architecture
So both Liu and I made huge messes of find_lock_delalloc_range trying to fix
stuff, me first by fixing extent size, then him by fixing something I broke and
then me again telling him to fix it a different way. So this is obviously a
candidate for some testing. This patch adds a pseudo fs so we can allocate fake
inodes for tests that need an inode or pages. Then it addes a bunch of tests to
make sure find_lock_delalloc_range is acting the way it is supposed to. With
this patch and all of our previous patches to find_lock_delalloc_range I am sure
it is working as expected now. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull perf updates from Ingo Molnar:
"As a first remark I'd like to note that the way to build perf tooling
has been simplified and sped up, in the future it should be enough for
you to build perf via:
cd tools/perf/
make install
(ie without the -j option.) The build system will figure out the
number of CPUs and will do a parallel build+install.
The various build system inefficiencies and breakages Linus reported
against the v3.12 pull request should now be resolved - please
(re-)report any remaining annoyances or bugs.
Main changes on the perf kernel side:
* Performance optimizations:
. perf ring-buffer code optimizations, by Peter Zijlstra
. perf ring-buffer code optimizations, by Oleg Nesterov
. x86 NMI call-stack processing optimizations, by Peter Zijlstra
. perf context-switch optimizations, by Peter Zijlstra
. perf sampling speedups, by Peter Zijlstra
. x86 Intel PEBS processing speedups, by Peter Zijlstra
* Enhanced hardware support:
. for Intel Ivy Bridge-EP uncore PMUs, by Zheng Yan
. for Haswell transactions, by Andi Kleen, Peter Zijlstra
* Core perf events code enhancements and fixes by Oleg Nesterov:
. for uprobes, if fork() is called with pending ret-probes
. for uprobes platform support code
* New ABI details by Andi Kleen:
. Report x86 Haswell TSX transaction abort cost as weight
Main changes on the perf tooling side (some of these tooling changes
utilize the above kernel side changes):
* 'perf report/top' enhancements:
. Convert callchain children list to rbtree, greatly reducing the
time taken for callchain processing, from Namhyung Kim.
. Add new COMM infrastructure, further improving histogram
processing, from Frédéric Weisbecker, one fix from Namhyung Kim.
. Add /proc/kcore based live-annotation improvements, including
build-id cache support, multi map 'call' instruction navigation
fixes, kcore address validation, objdump workarounds. From
Adrian Hunter.
. Show progress on histogram collapsing, that can take a long
time, from Namhyung Kim.
. Add --max-stack option to limit callchain stack scan in 'top'
and 'report', improving callchain processing when reducing the
stack depth is an option, from Waiman Long.
. Add new option --ignore-vmlinux for perf top, from Willy
Tarreau.
* 'perf trace' enhancements:
. 'perf trace' now can can use a 'perf probe' dynamic tracepoints
to hook into the userspace -> kernel pathname copy so that it
can map fds to pathnames without reading /proc/pid/fd/ symlinks.
From Arnaldo Carvalho de Melo.
. Show VFS path associated with fd in live sessions, using a
'vfs_getname' 'perf probe' created dynamic tracepoint or by
looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.
. Add 'trace' beautifiers for lots of syscall arguments, from
Arnaldo Carvalho de Melo.
. Implement more compact 'trace' output by suppressing zeroed
args, from Arnaldo Carvalho de Melo.
. Show thread COMM by default in 'trace', from Arnaldo Carvalho de
Melo.
. Add option to show full timestamp in 'trace', from David Ahern.
. Add 'record' command in 'trace', to record raw_syscalls:*, from
David Ahern.
. Add summary option to dump syscall statistics in 'trace', from
David Ahern.
. Improve error messages in 'trace', providing hints about system
configuration steps needed for using it, from Ramkumar
Ramachandra.
. 'perf trace' now emits hints as to why tracing is not possible,
helping the user to setup the system to allow tracing in the
desired permission granularity, telling if the problem is due to
debugfs not being mounted or with not enough permission for
!root, /proc/sys/kernel/perf_event_paranoit value, etc. From
Arnaldo Carvalho de Melo.
* 'perf record' enhancements:
. Check maximum frequency rate for record/top, emitting better
error messages, from Jiri Olsa.
. 'perf record' code cleanups, from David Ahern.
. Improve write_output error message in 'perf record', from Adrian
Hunter.
. Allow specifying B/K/M/G unit to the --mmap-pages arguments,
from Jiri Olsa.
. Fix command line callchain attribute tests to handle the new
-g/--call-chain semantics, from Arnaldo Carvalho de Melo.
* 'perf kvm' enhancements:
. Disable live kvm command if timerfd is not supported, from David
Ahern.
. Fix detection of non-core features, from David Ahern.
* 'perf list' enhancements:
. Add usage to 'perf list', from David Ahern.
. Show error in 'perf list' if tracepoints not available, from
Pekka Enberg.
* 'perf probe' enhancements:
. Support "$vars" meta argument syntax for local variables,
allowing asking for all possible variables at a given probe
point to be collected when it hits, from Masami Hiramatsu.
* 'perf sched' enhancements:
. Address the root cause of that 'perf sched' stack initialization
build slowdown, by programmatically setting a big array after
moving the global variable back to the stack. Fix from Adrian
Hunter.
* 'perf script' enhancements:
. Set up output options for in-stream attributes, from Adrian
Hunter.
. Print addr by default for BTS in 'perf script', from Adrian
Juntmer
* 'perf stat' enhancements:
. Improved messages when doing profiling in all or a subset of
CPUs using a workload as the session delimitator, as in:
'perf stat --cpu 0,2 sleep 10s'
from Arnaldo Carvalho de Melo.
. Add units to nanosec-based counters in 'perf stat', from David
Ahern.
. Remove bogus info when using 'perf stat' -e cycles/instructions,
from Ramkumar Ramachandra.
* 'perf lock' enhancements:
. 'perf lock' fixes and cleanups, from Davidlohr Bueso.
* 'perf test' enhancements:
. Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
and 'perf test', from Adrian Hunter.
. Clarify the "sample parsing" test entry, from Arnaldo Carvalho
de Melo.
. Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
from Arnaldo Carvalho de Melo.
. Memory leak fixes in 'perf test', from Felipe Pena.
* 'perf bench' enhancements:
. Change the procps visible command-name of invididual benchmark
tests plus cleanups, from Ingo Molnar.
* Generic perf tooling infrastructure/plumbing changes:
. Separating data file properties from session, code
reorganization from Jiri Olsa.
. Fix version when building out of tree, as when using one of
these:
$ make help | grep perf
perf-tar-src-pkg - Build perf-3.12.0.tar source tarball
perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball
$
from David Ahern.
. Enhance option parse error message, showing just the help lines
of the options affected, from Namhyung Kim.
. libtraceevent updates from upstream trace-cmd repo, from Steven
Rostedt.
. Always use perf_evsel__set_sample_bit to set sample_type, from
Adrian Hunter.
. Memory and mmap leak fixes from Chenggang Qin.
. Assorted build fixes for from David Ahern and Jiri Olsa.
. Speed up and prettify the build system, from Ingo Molnar.
. Implement addr2line directly using libbfd, from Roberto Vitillo.
. Separate the GTK support in a separate libperf-gtk.so DSO, that
is only loaded when --gtk is specified, from Namhyung Kim.
. perf bash completion fixes and improvements from Ramkumar
Ramachandra.
. Support for Openembedded/Yocto -dbg packages, from Ricardo
Ribalda Delgado.
And lots and lots of other fixes and code reorganizations that did not
make it into the list, see the shortlog, diffstat and the Git log for
details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
uprobes: Fix the memory out of bound overwrite in copy_insn()
uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
perf tools: Remove unneeded include
perf record: Remove post_processing_offset variable
perf record: Remove advance_output function
perf record: Refactor feature handling into a separate function
perf trace: Don't relookup fields by name in each sample
perf tools: Fix version when building out of tree
perf evsel: Ditch evsel->handler.data field
uprobes: Export write_opcode() as uprobe_write_opcode()
uprobes: Introduce arch_uprobe->ixol
uprobes: Kill module_init() and module_exit()
uprobes: Move function declarations out of arch
perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
perf: Factor out strncpy() in perf_event_mmap_event()
tools/perf: Add required memory barriers
perf: Fix arch_perf_out_copy_user default
perf: Update a stale comment
perf: Optimize perf_output_begin() -- address calculation
...
struct rnd_state got mistakenly pulled into uapi header. It is not
used anywhere and does also not belong there!
Commit 5960164fde ("lib/random32: export pseudo-random number
generator for modules"), the last commit on rnd_state before it
got moved to uapi, says:
This patch moves the definition of struct rnd_state and the inline
__seed() function to linux/random.h. It renames the static __random32()
function to prandom32() and exports it for use in modules.
Hence, the structure was moved from lib/random32.c to linux/random.h
so that it can be used within modules (FCoE-related code in this
case), but not from user space. However, it seems to have been
mistakenly moved to uapi header through the uapi script. Since no-one
should make use of it from the linux headers, move the structure back
to the kernel for internal use, so that it can be modified on demand.
Joint work with Hannes Frederic Sowa.
Cc: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, the on disk data structures are in a header that can be exported to
userspace - and having them all centralized is nice too.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
This patch allows the removal of an open device to be deferred until
it is closed. (Previously such a removal attempt would fail.)
The deferred remove functionality is enabled by setting the flag
DM_DEFERRED_REMOVE in the ioctl structure on DM_DEV_REMOVE or
DM_REMOVE_ALL ioctl.
On return from DM_DEV_REMOVE, the flag DM_DEFERRED_REMOVE indicates if
the device was removed immediately or flagged to be removed on close -
if the flag is clear, the device was removed.
On return from DM_DEV_STATUS and other ioctls, the flag
DM_DEFERRED_REMOVE is set if the device is scheduled to be removed on
closure.
A device that is scheduled to be deleted can be revived using the
message "@cancel_deferred_remove". This message clears the
DMF_DEFERRED_REMOVE flag so that the device won't be deleted on close.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a operations structure that allows a network interface to export
the fact that it supports package forwarding in hardware between
physical interfaces and other mac layer devices assigned to it (such
as macvlans). This operaions structure can be used by virtual mac
devices to bypass software switching so that forwarding can be done
in hardware more efficiently.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Changes to the RPC socket code to allow NFSv4 to turn off
timeout+retry:
* Detect TCP connection breakage through the "keepalive" mechanism
- Add client side support for NFSv4.x migration (Chuck Lever)
- Add support for multiple security flavour arguments to the "sec="
mount option (Dros Adamson)
- fs-cache bugfixes from David Howells:
* Fix an issue whereby caching can be enabled on a file that is
open for writing
- More NFSv4 open code stable bugfixes
- Various Labeled NFS (selinux) bugfixes, including one stable fix
- Fix buffer overflow checking in the RPCSEC_GSS upcall encoding"
* tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
NFSv4.2: Remove redundant checks in nfs_setsecurity+nfs4_label_init_security
NFSv4: Sanity check the server reply in _nfs4_server_capabilities
NFSv4.2: encode_readdir - only ask for labels when doing readdirplus
nfs: set security label when revalidating inode
NFSv4.2: Fix a mismatch between Linux labeled NFS and the NFSv4.2 spec
NFS: Fix a missing initialisation when reading the SELinux label
nfs: fix oops when trying to set SELinux label
nfs: fix inverted test for delegation in nfs4_reclaim_open_state
SUNRPC: Cleanup xs_destroy()
SUNRPC: close a rare race in xs_tcp_setup_socket.
SUNRPC: remove duplicated include from clnt.c
nfs: use IS_ROOT not DCACHE_DISCONNECTED
SUNRPC: Fix buffer overflow checking in gss_encode_v0_msg/gss_encode_v1_msg
SUNRPC: gss_alloc_msg - choose _either_ a v0 message or a v1 message
SUNRPC: remove an unnecessary if statement
nfs: Use PTR_ERR_OR_ZERO in 'nfs/nfs4super.c'
nfs: Use PTR_ERR_OR_ZERO in 'nfs41_callback_up' function
nfs: Remove useless 'error' assignment
sunrpc: comment typo fix
SUNRPC: Add correct rcu_dereference annotation in rpc_clnt_set_transport
...
This patch moves the char and block major number definitions
to major.h to be with the rest of the major numbers.
While doing this, include major.h in the files that need it.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Pull char/misc patches from Greg KH:
"Here's the big char/misc driver patchset for 3.13-rc1.
Lots of stuff in here, including some new drivers for Intel's "MIC"
co-processor devices, and a new eeprom driver. Other things include
the driver attribute cleanups, extcon driver updates, hyperv updates,
and a raft of other miscellaneous driver fixes.
All of these have been in linux-next for a while"
* tag 'char-misc-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (121 commits)
misc: mic: Fixes for randconfig build errors and warnings.
tifm: fix error return code in tifm_7xx1_probe()
w1-gpio: Use devm_* functions
w1-gpio: Detect of_gpio_error for first gpio
uio: Pass pointers to virt_to_page(), not integers
uio: fix memory leak
misc/at24: avoid infinite loop on write()
misc/93xx46: avoid infinite loop on write()
misc: atmel_pwm: add deferred-probing support
mei: wd: host_init propagate error codes from called functions
mei: replace stray pr_debug with dev_dbg
mei: bus: propagate error code returned by mei_me_cl_by_id
mei: mei_cl_link remove duplicated check for open_handle_count
mei: print correct device state during unexpected reset
mei: nfc: fix memory leak in error path
lkdtm: add tests for additional page permissions
lkdtm: adjust recursion size to avoid warnings
lkdtm: isolate stack corruption test
mei: move host_clients_map cleanup to device init
mei: me: downgrade two errors to debug level
...
Sockets marked with IP_PMTUDISC_INTERFACE won't do path mtu discovery,
their sockets won't accept and install new path mtu information and they
will always use the interface mtu for outgoing packets. It is guaranteed
that the packet is not fragmented locally. But we won't set the DF-Flag
on the outgoing frames.
Florian Weimer had the idea to use this flag to ensure DNS servers are
never generating outgoing fragments. They may well be fragmented on the
path, but the server never stores or usees path mtu values, which could
well be forged in an attack.
(The root of the problem with path MTU discovery is that there is
no reliable way to authenticate ICMP Fragmentation Needed But DF Set
messages because they are sent from intermediate routers with their
source addresses, and the IMCP payload will not always contain sufficient
information to identify a flow.)
Recent research in the DNS community showed that it is possible to
implement an attack where DNS cache poisoning is feasible by spoofing
fragments. This work was done by Amir Herzberg and Haya Shulman:
<https://sites.google.com/site/hayashulman/files/fragmentation-poisoning.pdf>
This issue was previously discussed among the DNS community, e.g.
<http://www.ietf.org/mail-archive/web/dnsext/current/msg01204.html>,
without leading to fixes.
This patch depends on the patch "ipv4: fix DO and PROBE pmtu mode
regarding local fragmentation with UFO/CORK" for the enforcement of the
non-fragmentable checks. If other users than ip_append_page/data should
use this semantic too, we have to add a new flag to IPCB(skb)->flags to
suppress local fragmentation and check for this in ip_finish_output.
Many thanks to Florian Weimer for the idea and feedback while implementing
this patch.
Cc: David S. Miller <davem@davemloft.net>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a new 'audit_feature' bit which allows userspace to set it
such that the loginuid is absolutely immutable, even if you have
CAP_AUDIT_CONTROL.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This is a new audit feature which only grants processes with
CAP_AUDIT_CONTROL the ability to unset their loginuid. They cannot
directly set it from a valid uid to another valid uid. The ability to
unset the loginuid is nice because a priviledged task, like that of
container creation, can unset the loginuid and then priv is not needed
inside the container when a login daemon needs to set the loginuid.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The audit_status structure was not designed with extensibility in mind.
Define a new AUDIT_SET_FEATURE message type which takes a new structure
of bits where things can be enabled/disabled/locked one at a time. This
structure should be able to grow in the future while maintaining forward
and backward compatibility (based loosly on the ideas from capabilities
and prctl)
This does not actually add any features, but is just infrastructure to
allow new on/off types of audit system features.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
SFR reported this 2013-05-15:
> After merging the final tree, today's linux-next build (i386 defconfig)
> produced this warning:
>
> kernel/auditfilter.c: In function 'audit_data_to_entry':
> kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only
> in ISO C90 [enabled by default]
>
> Introduced by commit 780a7654ce ("audit: Make testing for a valid
> loginuid explicit") from Linus' tree.
Replace this decimal constant in the code with a macro to make it more readable
(add to the unsigned cast to quiet the warning).
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
John W. Linville says:
====================
Please accept the following pull request intended for the 3.13 tree...
I had intended to pass most of these to you as much as two weeks ago.
Unfortunately, I failed to account for the effects of bad Internet
connections and my own fatique/laziness while traveling. On the bright
side, at least these have been baking in linux-next for some time!
For the mac80211 bits, Johannes says:
"This time I have two fixes for P2P (which requires not using CCK rates)
and a workaround for APs with broken WMM information."
For the iwlwifi bits, Johannes says:
"I have a few fixes for warnings/issues: one from Alex, fixing scan
timings, one from Emmanuel fixing a WARN_ON in the DVM driver, one from
Stanislaw removing a trigger-happy WARN_ON in the MVM driver and a
change from myself to try to recover when the device isn't processing
commands quickly."
And:
"For this round, I have a lot of changes:
* power management improvements
* BT coexistence improvements/updates
* new device support
* VHT support
* IBSS support (though due to a small bug it requires new firmware)
* various other fixes/improvements."
For the Bluetooth bits, Gustavo says:
"More patches for 3.12, busy times for Bluetooth. More than a 100 commits since
the last pull. The bulk of work comes from Johan and Marcel, they are doing
fixes and improvements all over the Bluetooth subsystem, as the diffstat can
show."
For the ath10k and ath6kl bits, Kalle says:
"Bartosz added support to ath10k for our 10.x AP firmware branch, which
gives us AP specific features and fixes. We still support the main
firmware branch as well just like before, ath10k detects runtime what
firmware is used. Unfortunately the firmware interface in 10.x branch is
somewhat different so there was quite a lot of changes in ath10k for
this.
Michal and Sujith did some performance improvements in ath10k. Vladimir
fixed a compiler warning and Fengguang removed an extra semicolon."
For the NFC bits, Samuel says:
"It's a fairly big one, with the following highlights:
- NFC digital layer implementation: Most NFC chipsets implement the NFC
digital layer in firmware, but others have more basic functionalities
and expect the host to implement the digital layer. This layer sits
below the NFC core.
- Sony's port100 support: This is "soft" NFC USB dongle that expects the
digital layer to be implemented on the host. This is the first user of
our NFC digital stack implementation.
- Secure element API: We now provide a netlink API for enabling,
disabling and discovering NFC attached (embedded or UICC ones) secure
elements. With some userspace help, this allows us to support NFC
payments.
Only the pn544 driver currently supports that API.
- NCI SPI fixes and improvements: In order to support NCI devices over
SPI, we fixed and improved our NCI/SPI implementation. The currently
most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
and we're planning to use our NCI/SPI framework to implement a
driver for it.
- pn533 fragmentation support in target mode: This was the only missing
feature from our pn533 impementation. We now support fragmentation in
both Tx and Rx modes, in target mode."
On top of all that, brcmfmac and rt2x00 both get the usual flurry
of updates. A few other drivers get hit here or there as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
This is another batch containing Netfilter/IPVS updates for your net-next
tree, they are:
* Six patches to make the ipt_CLUSTERIP target support netnamespace,
from Gao feng.
* Two cleanups for the nf_conntrack_acct infrastructure, introducing
a new structure to encapsulate conntrack counters, from Holger
Eitzenberger.
* Fix missing verdict in SCTP support for IPVS, from Daniel Borkmann.
* Skip checksum recalculation in SCTP support for IPVS, also from
Daniel Borkmann.
* Fix behavioural change in xt_socket after IP early demux, from
Florian Westphal.
* Fix bogus large memory allocation in the bitmap port set type in ipset,
from Jozsef Kadlecsik.
* Fix possible compilation issues in the hash netnet set type in ipset,
also from Jozsef Kadlecsik.
* Define constants to identify netlink callback data in ipset dumps,
again from Jozsef Kadlecsik.
* Use sock_gen_put() in xt_socket to replace xt_socket_put_sk,
from Eric Dumazet.
* Improvements for the SH scheduler in IPVS, from Alexander Frolkin.
* Remove extra delay due to unneeded rcu barrier in IPVS net namespace
cleanup path, from Julian Anastasov.
* Save some cycles in ip6t_REJECT by skipping checksum validation in
packets leaving from our stack, from Stanislav Fomichev.
* Fix IPVS_CMD_ATTR_MAX definition in IPVS, larger that required, from
Julian Anastasov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross says:
====================
Open vSwitch
A set of updates for net-next/3.13. Major changes are:
* Restructure flow handling code to be more logically organized and
easier to read.
* Rehashing of the flow table is moved from a workqueue to flow
installation time. Before, heavy load could block the workqueue for
excessive periods of time.
* Additional debugging information is provided to help diagnose megaflows.
* It's now possible to match on TCP flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/emulex/benet/be.h
drivers/net/netconsole.c
net/bridge/br_private.h
Three mostly trivial conflicts.
The net/bridge/br_private.h conflict was a function signature (argument
addition) change overlapping with the extern removals from Joe Perches.
In drivers/net/netconsole.c we had one change adjusting a printk message
whilst another changed "printk(KERN_INFO" into "pr_info(".
Lastly, the emulex change was a new inline function addition overlapping
with Joe Perches's extern removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
High-availability Seamless Redundancy ("HSR") provides instant failover
redundancy for Ethernet networks. It requires a special network topology where
all nodes are connected in a ring (each node having two physical network
interfaces). It is suited for applications that demand high availability and
very short reaction time.
HSR acts on the Ethernet layer, using a registered Ethernet protocol type to
send special HSR frames in both directions over the ring. The driver creates
virtual network interfaces that can be used just like any ordinary Linux
network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring
must be HSR capable.
This code is a "best effort" to comply with the HSR standard as described in
IEC 62439-3:2010 (HSRv0).
Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_flags=flags/mask
Bitwise match on TCP flags. The flags and mask are 16-bit num‐
bers written in decimal or in hexadecimal prefixed by 0x. Each
1-bit in mask requires that the corresponding bit in port must
match. Each 0-bit in mask causes the corresponding bit to be
ignored.
TCP protocol currently defines 9 flag bits, and additional 3
bits are reserved (must be transmitted as zero), see RFCs 793,
3168, and 3540. The flag bits are, numbering from the least
significant bit:
0: FIN No more data from sender.
1: SYN Synchronize sequence numbers.
2: RST Reset the connection.
3: PSH Push function.
4: ACK Acknowledgement field significant.
5: URG Urgent pointer field significant.
6: ECE ECN Echo.
7: CWR Congestion Windows Reduced.
8: NS Nonce Sum.
9-11: Reserved.
12-15: Not matchable, must be zero.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
So far we've succeeded at making KVM and VFIO mostly unaware of each
other, but areas are cropping up where a connection beyond eventfds
and irqfds needs to be made. This patch introduces a KVM-VFIO device
that is meant to be a gateway for such interaction. The user creates
the device and can add and remove VFIO groups to it via file
descriptors. When a group is added, KVM verifies the group is valid
and gets a reference to it via the VFIO external user interface.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a kvm ioctl which states which system functionality kvm emulates.
The format used is that of CPUID and we return the corresponding CPUID
bits set for which we do emulate functionality.
Make sure ->padding is being passed on clean from userspace so that we
can use it for something in the future, after the ioctl gets cast in
stone.
s/kvm_dev_ioctl_get_supported_cpuid/kvm_dev_ioctl_get_cpuid/ while at
it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This work contains a lightweight BPF-based traffic classifier that can
serve as a flexible alternative to ematch-based tree classification, i.e.
now that BPF filter engine can also be JITed in the kernel. Naturally, tc
actions and policies are supported as well with cls_bpf. Multiple BPF
programs/filter can be attached for a class, or they can just as well be
written within a single BPF program, that's really up to the user how he
wishes to run/optimize the code, e.g. also for inversion of verdicts etc.
The notion of a BPF program's return/exit codes is being kept as follows:
0: No match
-1: Select classid given in "tc filter ..." command
else: flowid, overwrite the default one
As a minimal usage example with iproute2, we use a 3 band prio root qdisc
on a router with sfq each as leave, and assign ssh and icmp bpf-based
filters to band 1, http traffic to band 2 and the rest to band 3. For the
first two bands we load the bytecode from a file, in the 2nd we load it
inline as an example:
echo 1 > /proc/sys/net/core/bpf_jit_enable
tc qdisc del dev em1 root
tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
tc qdisc add dev em1 parent 1:1 sfq perturb 16
tc qdisc add dev em1 parent 1:2 sfq perturb 16
tc qdisc add dev em1 parent 1:3 sfq perturb 16
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2
tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3
BPF programs can be easily created and passed to tc, either as inline
'bytecode' or 'bytecode-file'. There are a couple of front-ends that can
compile opcodes, for example:
1) People familiar with tcpdump-like filters:
tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf
2) People that want to low-level program their filters or use BPF
extensions that lack support by libpcap's compiler:
bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf
ssh.ops example code:
ldh [12]
jne #0x800, drop
ldb [23]
jneq #6, drop
ldh [20]
jset #0x1fff, drop
ldxb 4 * ([14] & 0xf)
ldh [%x + 14]
jeq #0x16, pass
ldh [%x + 16]
jne #0x16, drop
pass: ret #-1
drop: ret #0
It was chosen to load bytecode into tc, since the reverse operation,
tc filter list dev em1, is then able to show the exact commands again.
Possible follow-up work could also include a small expression compiler
for iproute2. Tested with the help of bmon. This idea came up during
the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from
Eric Dumazet!
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the parsed sec= flavor is now stored in nfs_server->auth_info,
we no longer need an nfs_server flag to determine if a sec= option was
used.
This flag has not been completely removed because it is still needed for
the (old but still supported) non-text parsed mount options ABI
compatability.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
VPE is a block which consists of a single memory to memory path which
can perform chrominance up/down sampling, de-interlacing, scaling, and
color space conversion of raster or tiled YUV420 coplanar, YUV422
coplanar or YUV422 interleaved video formats.
We create a mem2mem driver based primarily on the mem2mem-testdev
example. The de-interlacer, scaler and color space converter are all
bypassed for now to keep the driver simple. Chroma up/down sampler
blocks are implemented, so conversion beteen different YUV formats is
possible.
Each mem2mem context allocates a buffer for VPE MMR values which it will
use when it gets access to the VPE HW via the mem2mem queue, it also
allocates a VPDMA descriptor list to which configuration and data
descriptors are added.
Based on the information received via v4l2 ioctls for the source and
destination queues, the driver configures the values for the MMRs, and
stores them in the buffer. There are also some VPDMA parameters like
frame start and line mode which needs to be configured, these are
configured by direct register writes via the VPDMA helper functions.
The driver's device_run() mem2mem op will add each descriptor based on
how the source and destination queues are set up for the given ctx, once
the list is prepared, it's submitted to VPDMA, these descriptors when
parsed by VPDMA will upload MMR registers, start DMA of video buffers on
the various input and output clients/ports.
When the list is parsed completely(and the DMAs on all the output ports
done), an interrupt is generated which we use to notify that the source
and destination buffers are done. The rest of the driver is quite
similar to other mem2mem drivers, we use the multiplane v4l2 ioctls as
the HW support coplanar formats.
Signed-off-by: Archit Taneja <archit@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
To use DFS in IBSS mode, userspace is required to react to radar events.
It can inform nl80211 that it is capable of doing so by adding a
NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS.
This attribute is supplied to let the kernelspace know that the
userspace application can and will handle radar events, e.g. by
intiating channel switches to a valid channel. DFS channels may
only be used if this attribute is supplied and the driver supports
it. Driver support will be checked even if a channel without DFS
will be initially joined, as a DFS channel may be chosen later.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[fix attribute name in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch provides a single place for information about hash algorithms,
such as hash sizes and kernel driver names, which will be used by IMA
and the public key code.
Changelog:
- Fix sparse and checkpatch warnings
- Move hash algo enums to uapi for userspace signing functions.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Collect mega flow mask stats. ovs-dpctl show command can be used to
display them for debugging and performance tuning.
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
This moves the kvmppc_ops callbacks to be a per VM entity. This
enables us to select HV and PR mode when creating a VM. We also
allow both kvm-hv and kvm-pr kernel module to be loaded. To
achieve this we move /dev/kvm ownership to kvm.ko module. Depending on
which KVM mode we select during VM creation we take a reference
count on respective module
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[agraf: fix coding style]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a batch support to nfnetlink. Basically, it adds
two new control messages:
* NFNL_MSG_BATCH_BEGIN, that indicates the beginning of a batch,
the nfgenmsg->res_id indicates the nfnetlink subsystem ID.
* NFNL_MSG_BATCH_END, that results in the invocation of the
ss->commit callback function. If not specified or an error
ocurred in the batch, the ss->abort function is invoked
instead.
The end message represents the commit operation in nftables, the
lack of end message results in an abort. This patch also adds the
.call_batch function that is only called from the batch receival
path.
This patch adds atomic rule updates and dumps based on
bitmask generations. This allows to atomically commit a set of
rule-set updates incrementally without altering the internal
state of existing nf_tables expressions/matches/targets.
The idea consists of using a generation cursor of 1 bit and
a bitmask of 2 bits per rule. Assuming the gencursor is 0,
then the genmask (expressed as a bitmask) can be interpreted
as:
00 active in the present, will be active in the next generation.
01 inactive in the present, will be active in the next generation.
10 active in the present, will be deleted in the next generation.
^
gencursor
Once you invoke the transition to the next generation, the global
gencursor is updated:
00 active in the present, will be active in the next generation.
01 active in the present, needs to zero its future, it becomes 00.
10 inactive in the present, delete now.
^
gencursor
If a dump is in progress and nf_tables enters a new generation,
the dump will stop and return -EBUSY to let userspace know that
it has to retry again. In order to invalidate dumps, a global
genctr counter is increased everytime nf_tables enters a new
generation.
This new operation can be used from the user-space utility
that controls the firewall, eg.
nft -f restore
The rule updates contained in `file' will be applied atomically.
cat file
-----
add filter INPUT ip saddr 1.1.1.1 counter accept #1
del filter INPUT ip daddr 2.2.2.2 counter drop #2
-EOF-
Note that the rule 1 will be inactive until the transition to the
next generation, the rule 2 will be evicted in the next generation.
There is a penalty during the rule update due to the branch
misprediction in the packet matching framework. But that should be
quickly resolved once the iteration over the commit list that
contain rules that require updates is finished.
Event notification happens once the rule-set update has been
committed. So we skip notifications is case the rule-set update
is aborted, which can happen in case that the rule-set is tested
to apply correctly.
This patch squashed the following patches from Pablo:
* nf_tables: atomic rule updates and dumps
* nf_tables: get rid of per rule list_head for commits
* nf_tables: use per netns commit list
* nfnetlink: add batch support and use it from nf_tables
* nf_tables: all rule updates are transactional
* nf_tables: attach replacement rule after stale one
* nf_tables: do not allow deletion/replacement of stale rules
* nf_tables: remove unused NFTA_RULE_FLAGS
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a new rule attribute NFTA_RULE_POSITION which is
used to store the position of a rule relatively to the others.
By providing the create command and specifying the position, the
rule is inserted after the rule with the handle equal to the
provided position.
Regarding notification, the position attribute specifies the
handle of the previous rule to make sure we don't point to any
stale rule in notifications coming from the commit path.
This patch includes the following fix from Pablo:
* nf_tables: fix rule deletion event reporting
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch generalizes the NAT expression to support both IPv4 and IPv6
using the existing IPv4/IPv6 NAT infrastructure. This also adds the
NAT chain type for IPv6.
This patch collapses the following patches that were posted to the
netfilter-devel mailing list, from Tomasz:
* nf_tables: Change NFTA_NAT_ attributes to better semantic significance
* nf_tables: Split IPv4 NAT into NAT expression and IPv4 NAT chain
* nf_tables: Add support for IPv6 NAT expression
* nf_tables: Add support for IPv6 NAT chain
* nf_tables: Fix up build issue on IPv6 NAT support
And, from Pablo Neira Ayuso:
* fix missing dependencies in nft_chain_nat
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch allows you to temporarily disable an entire table.
You can change the state of a dormant table via NFT_MSG_NEWTABLE
messages. Using this operation you can wake up a table, so their
chains are registered.
This provides atomicity at chain level. Thus, the rule-set of one
chain is applied at once, avoiding any possible intermediate state
in every chain. Still, the chains that belongs to a table are
registered consecutively. This also allows you to have inactive
tables in the kernel.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
