dm_log_to_buffer logs unconditionally, so calling it directly resulted
in the main message being logged even when the event type isn't enabled
in the event mask.
To fix this, use the new dm_logger_append_va API.
Fixes spurious messages like
[drm] {1920x1200, 2080x1235@154000Khz}
in dmesg when a mode is set.
v2:
* Use new dm_logger_append_va API, fixes incorrect va_list usage in v1
* Just use and decrease entry.buf_offset to get rid of the trailing
newline
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as dm_logger_append, except it takes a va_list instead of a
variable number of arguments. dm_logger_append is now a minimal wrapper
around dm_logger_append_va.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On S3 resume, we do not reconstruct OPP, but we do need to
reinitialize some of its values to the default ones.
Therefore, move those lines out of the OPP constructor and
into init_hw.
Also reset the hubp power gated flag, since nothing is
power gated at init_hw.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Doing bandwidth validation implies that this is a full update. Set the
flag inside the function in case whatever is calling
dcn_validate_bandwidth doesn't set it.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sequence of front-end > back-end > front-end programming will
program the front-end more than once. Add a mode_changed flag, and use
it to determine whether the front-end should be programmed before, or
after back-end.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There was an error in translation of mode support check.
"N/A" is a failure condition while "" was a special case.
This change will differentiate between the two by using a
define.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn10_translate_regamma_to_hw_format costs 750us to run, it cannot be
called within isr, check update flag before calling, only do it for
full update.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move update_plane_addr to apply_ctx_for_surface, address update will
just be called once, not twice for updat type is full and medium.
This will reduce some reg access and duration time.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Line continuations with excess spacing causes unexpected output.
Miscellanea:
o Added missing '\n' to a few of the coalesced pr_<level> formats
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable swap.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable temp.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to have this as a vtable. The vtable was initially
used for stream_adjust_vmin_vmax but the condition checked here
(set_drr) is always true, hence we don't need to assign this
dynamically anymore.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
plane update prior to stream enablement is there to recombine pipe
in case we need free pipe for new display. need to pass in new state
or we will just re-applyingwhat we already have
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way, we can know exactly what triggered the update type we're
looking at, and we can simplify the logic for determining what exactly
needs to be updated in the future.
Also allow a dst rect size increase to go through a medium update,
since that does not require us to increase clock or bandwidth.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
