[ Upstream commit 08319adbdde15ef7cee1970336f63461254baa2a ]
The DRM_SIL_SII8620 kconfig has a weak `imply` dependency
on EXTCON, which causes issues when sii8620 is built
as a builtin and EXTCON is built as a module.
The symptoms are 'undefined reference' errors caused
by the symbols in EXTCON not being available
to the sii8620 driver.
Fixes: 6888384421 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cc5f7e2fcbe396f2f461cd67c872af771a334bca upstream.
On the SII9022, the IOVCC and CVCC12 supplies must reach the correct
voltage before the reset sequence is initiated. On most boards, this
assumption is true at boot-up, so initialization succeeds.
However, when we try to initialize the chip with incorrect supply
voltages, it will not respond to I2C requests. sii902x_probe() fails
with -ENXIO.
To resolve this, look for the "iovcc" and "cvcc12" regulators, and
make sure they are enabled before starting the reset sequence. If
these supplies are not available in devicetree, then they will default
to dummy-regulator. In that case everything will work like before.
This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode.
On this board, the supplies would be set by the second stage
bootloader, which does not run in falcon mode.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[Fix checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-2-mr.nuke.me@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been observed that resetting force in the detect function can
result in the PHY being powered down in response to hot-plug detect
being asserted, even when the HDMI connector is forced on.
Enabling debug messages and adding a call to dump_stack() in
dw_hdmi_phy_power_off() shows the following in dmesg:
[ 160.637413] dwhdmi-rockchip ff940000.hdmi: EVENT=plugin
[ 160.637433] dwhdmi-rockchip ff940000.hdmi: PHY powered down in 0 iterations
Call trace:
dw_hdmi_phy_power_off
dw_hdmi_phy_disable
dw_hdmi_update_power
dw_hdmi_detect
dw_hdmi_connector_detect
drm_helper_probe_detect_ctx
drm_helper_hpd_irq_event
dw_hdmi_irq
irq_thread_fn
irq_thread
kthread
ret_from_fork
Fixes: 381f05a7a8 ("drm: bridge/dw_hdmi: add connector mode forcing")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201031081747.372599-1-net147@gmail.com
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
- virtio: Merged a PR for patches that will affect drm/virtio
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
- atomic: Split out drm_atomic_helper_calc_timestamping_constants of
drm_atomic_helper_update_legacy_modeset_state
- ttm: More rework
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
- tree-wide: conversions to devm_drm_dev_alloc,
- ast: simplifications of the atomic modesetting code
- panfrost: multiple fixes
- vc4: multiple fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E
SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP)
and embedded Display Port (eDP) standards. It integrates uCPU running the
embedded Firmware (FW) interfaced over APB interface.
Basically, it takes a DPI stream as input and outputs it encoded in DP
format. Currently, it supports only SST mode.
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl)
-> drm_helper_probe_single_connector_modes
-> drm_bridge_connector_get_modes
-> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before
get_edid(), the driver will not be able to get the EDID properly and
display will not work until a second get_edid() call is issued and if
pre_enable() is called before. The side effect of this, for example, is
that you see anything when `Frecon` starts, neither the splash screen,
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before
reading the EDID. This means the following:
1. If get_edid() is called before having the device powered we need to
power on the device. In such case, the driver will power off again the
device.
2. If get_edid() is called after having the device powered, all should
just work. We added a powered flag in order to avoid recurrent calls
to ps8640_bridge_poweron() and unneeded delays.
3. This seems to be specific for this device, but we need to make sure
the panel is powered on before do a power on cycle on this device.
Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
This driver is tested with two panels individually with Apq8016-IFC6309 board
https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc
1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24"
2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24"
- power off sequence in proper order
- put_unaligned_be16, put_unaligned_le32 macros used
- static function for mode_valid
- len initialized
- MODE_CLOCK_HIGH handled properly
- bus_formats handled in mode_valid
- GENMASK and FIELD_PREP used
- Kconfig proper indentation
- error handling endpoint data-lanes
- check for bus_formats unsupported
- display_timings naming local variables
- help modified
- ~vsdelay dynamic value set based on the
calculation of dsi speed, output speed, blanking
- panel->connector_type removed
- dual port implemented
- devm_drm_panel_bridge_add method used instead of panel
description modified
- regulator enable and disable with proper orders and delays
as per the spec
- removed drm_connector_status
- added bus_formats
- mdelay to usleep_range
- magic number to macros for CLRSI and mux registers
description modified
- replaced u32 instead of uint32_t
- updated alphabetic order of headers
- added SPDX identifier license
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-2-git-send-email-simhavcs@gmail.com
Pull sound updates from Takashi Iwai:
"This became wide and scattered updates all over the sound tree as
diffstat shows: lots of (still ongoing) refactoring works in ASoC,
fixes and cleanups caught by static analysis, inclusive term
conversions as well as lots of new drivers. Below are highlights:
ASoC core:
- API cleanups and conversions to the unified mute_stream() call
- Simplify I/O helper functions
- Use helper macros to retrieve RTD from substreams
ASoC drivers:
- Lots of fixes and cleanups in Intel ASoC drivers
- Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S,
Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards,
nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries
boards, TI J721e EVM
ALSA core:
- Minor code refacotring for SG-buffer handling
HD-audio:
- Generalization of mute-LED handling with LED classdev
- Intel silent stream support for HDMI
- Device-specific fixes: CA0132, Loongson-3
Others:
- Usual USB- and HD-audio quirks for various devices
- Fixes for echoaudio DMA position handling
- Various documents and trivial fixes for sparse warnings
- Conversion to adopt inclusive terms"
* tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (479 commits)
ALSA: pci: delete repeated words in comments
ALSA: isa: delete repeated words in comments
ALSA: hda/tegra: Add 100us dma stop delay
ALSA: hda: Add dma stop delay variable
ASoC: hda/tegra: Set buffer alignment to 128 bytes
ALSA: seq: oss: Serialize ioctls
ALSA: hda/hdmi: Add quirk to force connectivity
ALSA: usb-audio: add startech usb audio dock name
ALSA: usb-audio: Add support for Lenovo ThinkStation P620
Revert "ALSA: hda: call runtime_allow() for all hda controllers"
ALSA: hda/ca0132 - Fix AE-5 microphone selection commands.
ALSA: hda/ca0132 - Add new quirk ID for Recon3D.
ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value.
ALSA: hda/realtek: Add alc269/alc662 pin-tables for Loongson-3 laptops
ALSA: docs: fix typo
ALSA: doc: use correct config variable name
ASoC: core: Two step component registration
ASoC: core: Simplify snd_soc_component_initialize declaration
ASoC: core: Relocate and expose snd_soc_component_initialize
ASoC: sh: Replace 'select' DMADEVICES 'with depends on'
...
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
