At Hikey 970, setting the SPLIT disable at the General
User Register 3 is required.
Without that, the URBs generated by the usbhid driver
return -EPROTO errors. That causes the code at
hid-core.c to call hid_io_error(), which schedules
a reset_work, causing a call to hid_reset().
In turn, the code there will call:
usb_queue_reset_device(usbhid->intf);
The net result is that the input devices won't work, and
will be reset on every 0.5 seconds:
[ 33.122384] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 33.378220] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 33.698394] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 34.882365] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 35.138217] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 35.458617] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 36.642392] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 36.898207] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 37.218598] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 38.402368] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 38.658174] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
[ 38.978594] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 40.162361] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 40.418148] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
...
[ 397.698132] usb 1-1.1: reset low-speed USB device number 3 using xhci-hcd
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
adds the specific compatible string for the DWC2 IP found in the APM82181
SoCs. The APM82181's USB-OTG seems like it was taken from its direct
predecessor: the PPC460EX (canyonlands).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Controller version 0x0002450D has USB2 PHY RX sensitivity issues
that needs to be worked around by enabling phyrst-a-enable bit
in PHYRST_CFG register.
There is no way to know controller version before device controller
is started and the workaround needs to be applied for both host and
device modes, so we add this DT property.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Converts cdns-usb3.txt to YAML schema cdns,usb3.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Vinod writes:
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
soundwire: sysfs: add slave status and device number before probe
soundwire: bus: add enumerated Slave device to device list
soundwire: remove an unnecessary NULL check
soundwire: cadence: add data port test fail interrupt
soundwire: intel: enable test modes
soundwire: enable Data Port test modes
soundwire: intel: use {u32|u16}p_replace_bits
soundwire: cadence: use u32p_replace_bits
soundwire: qcom: get max rows and cols info from compatible
soundwire: qcom: add support to block packing mode
soundwire: qcom: clear BIT FIELDs before value set.
soundwire: Add generic bandwidth allocation algorithm
soundwire: cadence: add parity error injection through debugfs
soundwire: bus: export broadcast read/write capability for tests
ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
soundwire: bus: use quirk to filter out invalid parity errors
soundwire: slave: add first_interrupt_done status
soundwire: bus: filter-out unwanted interrupt reports
ASoC/soundwire: bus: use property to set interrupt masks
soundwire: qcom: fix SLIBMUS/SLIMBUS typo
...
The PM660 and PM660L combo is found on boards featuring the
SDM630, SDM636, SDM660 (and SDA variants) and it is used to
give power to practically everything, from core to peripherals.
Document the SMD-RPM regulator entries for both.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-8-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM660 and PM660L combo is found on boards featuring the
SDM630, SDM636, SDM660 (and SDA variants) and it is used to
give power to practically everything, from core to peripherals.
Document the SPMI regulator bindings for both.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20200926125549.13191-5-kholk11@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Add properties for configuring the internal MAC delays.
These properties are mandatory, even when specified as zero, to
distinguish between old and new DTBs.
Update the (bogus) example accordingly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Internal Receive and Transmit Clock Delays are a common setting for
RGMII capable devices.
While these delays are typically applied by the PHY, some MACs support
configuring internal clock delay settings, too. Hence add standardized
properties to configure this.
This is the MAC counterpart of commit 9150069bf5 ("dt-bindings:
net: Add tx and rx internal delays"), which applies to the PHY.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the Hisilicon Bootwrapper boot method binding to DT schema format
using json-schema.
The property boot-method contains two groups of physical address range
information: bootwrapper and relocation. The "uint32-array" type is not
suitable for it, because the field "address" and "size" may occupy one or
two cells respectively. Use "minItems: 1" and "maxItems: 2" to allow it
can be written in "<addr size addr size>" or "<addr size>, <addr size>"
format.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20200929141454.2312-15-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> # for BD70528
Acked-by: Tim Harvey <tharvey@gateworks.com> # for gateworks-gsc.yaml
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add the LP87524-Q1 to the bindings along with an example. This is a variant
of the LP87565-Q1 and LP87561-Q1 chips which already have bindings.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Also apply a few smaller improvements:
- document that the only possible I2C slave address is 0x60 as per the
datasheet and fix the second example accordingly
- The definition of "xxx-in-supply" was generic, thus define in detail the
possible cases for each chip variant
- remove "MFD driver" from the title as it is implementation specific
- replace "PMIC" with "buck converter" in title as it is more informative
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Document Samsung Exynos3 and Exynos5433 compatibles for system
registers.
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Samsung Exynos System Registers (Sysreg) bindings are quite simple -
just additional compatible to the syscon. They do not have any value so
merge them into generic MFD syscon bindings.
Suggested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There are stray Unicode quotation marks (U+201C DOUBLE TURNED COMMA
QUOTATION MARK) in the file. Remove them, as they don't serve a purpose.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull devicetree fixes from Rob Herring:
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
dt-bindings: Fix 'reg' size issues in zynqmp examples
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
dt-bindings: crypto: sa2ul: fix a DT binding check warning
This binding can support Ingenic JZ4725B and JZ4770 SoCs, as they are
compatible with Ingenic JZ4740 battery.
Introduce the following compatible property combinations:
compatible = "ingenic,jz4725b-battery", "ingenic,jz4740-battery",
compatible = "ingenic,jz4770-battery", "ingenic,jz4740-battery"
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
