[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ]
Commit e428e250fd ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.
Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.
Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.
Fixes: e428e250fd ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49bcb1506f2e095262c01bda7fd1c0db524c91e2 ]
When converting the thermal-zones bindings to yaml the definition of the
contribution property changed. The intention is the same, an integer
value expressing a ratio of a sum on how much cooling is provided by the
device to the zone. But after the conversion the integer value is
limited to the range 0 to 100 and expressed as a percentage.
This is problematic for two reasons.
- This do not match how the binding is used. Out of the 18 files that
make use of the property only two (ste-dbx5x0.dtsi and
ste-hrefv60plus.dtsi) sets it at a value that satisfy the binding,
100. The remaining 16 files set the value higher and fail to validate.
- Expressing the value as a percentage instead of a ratio of the sum is
confusing as there is nothing to enforce the sum in the zone is not
greater then 100.
This patch restore the pre yaml conversion description and removes the
value limitation allowing the usage of the bindings to validate.
Fixes: 1202a442a3 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211109103045.1403686-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 96db48c9d777a73a33b1d516c5cfed7a417a5f40 upstream.
This binding was already documented in phy.txt, commit 252ae5330d
("Documentation: devicetree: Add PHY no lane swap binding"), but got
accidently removed during YAML conversion in commit d8704342c1
("dt-bindings: net: Add a YAML schemas for the generic PHY options").
Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are
not identical, as the former one disable this feature, while the latter
one doesn't change anything.
Fixes: d8704342c1 ("dt-bindings: net: Add a YAML schemas for the generic PHY options")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211130082756.713919-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream.
The driver and its bindings, before commit 04f9f068a6 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a6 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a6 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]
"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.
"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.
Fix the equation by substituting s/>=/<=/.
Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 ]
The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).
The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"
This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".
Change the "pwmN" groups to support "led" function.
Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.
Fixes: b835d69530 ("pinctrl: armada-37xx: swap polarity on LED group")
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c8094e394bceb4f1880f9d539bdd255c130826e ]
When the schema fixups are applied to 'select' the result is a single
entry is required for a match, but that will never match as there should
be 2 entries. Also, a 'select' schema should have the widest possible
match, so use 'contains' which matches the compatible string(s) in any
position and not just the first position.
Fixes: 993dcfac64 ("dt-bindings: riscv: sifive-l2-cache: convert bindings to json-schema")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e669017ff1616ba7d8ba3c65f5193bc2a7acbe ]
The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix c5a2838025 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 19e5cef058 ("dt-bindings: i2c: at91: document optional bus recovery properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d031d99b02eaf7363c33f5b27b38086cc8104082 upstream.
There is a fair amount of warnings when running 'make dtbs_check' with
amlogic,gx-sound-card.yaml.
Ex:
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long
The reason is that the sound-dai phandle provided has cells, and in such
case the schema should use 'phandle-array' instead of 'phandle'.
Fixes: fd00366b8e ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af9d316f3dd6d1385fbd1631b5103e620fc4298a upstream.
The correct property name is "nvmem-cell-names". This is what:
1. Was originally documented in the ethernet.txt
2. Is used in DTS files
3. Matches standard syntax for phandles
4. Linux net subsystem checks for
Fixes: 9d3de3c583 ("dt-bindings: net: Add YAML schemas for the generic Ethernet options")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f97844f9c518172f813b7ece18a9956b1f70c1bb ]
The merge resolution of the interaction of commits 307eea32b2
("dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC") and
d7adf63311 ("dt-bindings: net: renesas,etheravb: Convert to
json-schema") missed that "tx-internal-delay-ps" should be a required
property on RZ/G2H.
Fixes: 8b0308fe31 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210105151516.1540653-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Fixes: a1a8b4594f ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670fc ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b3292215 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of small fixes: the only core change is a minor error
code handling in the control API, and all the rest are device-specific
fixes, mostly quirks, fixups and ASoC Intel fixes.
It looks boring, and good so"
* tag 'sound-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: mixart: Fix mutex deadlock
ALSA: hda/ca0132: Fix compile warning without PCI
ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock
ALSA: usb-audio: Add delay quirk for all Logitech USB devices
ASoC: Intel: catpt: Correct clock selection for dai trigger
ASoC: Intel: catpt: Skip position update for unprepared streams
ASoC: qcom: lpass-platform: Fix memory leak
ASoC: Intel: KMB: Fix S24_LE configuration
ALSA: hda: Add Alderlake-S PCI ID and HDMI codec vid
ALSA: usb-audio: Use ALC1220-VB-DT mapping for ASUS ROG Strix TRX40 mobo
ALSA: firewire: Clean up a locking issue in copy_resp_to_buf()
ASoC: rt1015: increase the time to detect BCLK
ALSA: ctl: fix error path at adding user-defined element set
ALSA: hda/realtek - HP Headset Mic can't detect after boot
ALSA: hda/realtek - Add supported mute Led for HP
ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)
ALSA: hda/realtek - Add supported for Lenovo ThinkPad Headset Button
ASoC: rt1015: add delay to fix pop noise from speaker
The RaspberryPi4 has both a WiFi chip and HDMI outputs capable of doing
4k. Unfortunately, the 1440p resolution at 60Hz has a TMDS rate on the
HDMI cable right in the middle of the first Wifi channel.
Add a property to our HDMI controller, that could be reused by other
similar HDMI controllers, to allow the OS to take whatever measure is
necessary to avoid that crosstalk.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029134018.1948636-1-maxime@cerno.tech
Since commit:
0e030a373d ("can: flexcan: fix endianess detection")
the fsl,imx53-flexcan isn't compatible with the fsl,p1010-flexcan any more. As
the former accesses the IP core in Little Endian mode and the latter uses Big
Endian mode.
With the conversion of the flexcan DT bindings to yaml, the dt_binding_check
this throws the following error:
Documentation/devicetree/bindings/clock/imx5-clock.example.dt.yaml: can@53fc8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx53-flexcan', 'fsl,p1010-flexcan'] is too long
Additional items are not allowed ('fsl,p1010-flexcan' was unexpected)
'fsl,imx53-flexcan' is not one of ['fsl,imx7d-flexcan', 'fsl,imx6ul-flexcan', 'fsl,imx6sx-flexcan']
'fsl,imx53-flexcan' is not one of ['fsl,ls1028ar1-flexcan']
'fsl,imx6q-flexcan' was expected
'fsl,lx2160ar1-flexcan' was expected
From schema: /builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
The error is fixed by replacing the "fsl,p1010-flexcan" compatible
(which turned out the be incompatible) with "fsl,imx25-flexcan" in the
binding example.
Reported-by: Rob Herring <robh+dt@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201111213548.1621094-1-mkl@pengutronix.de
[robh: Add "fsl,imx25-flexcan" as fallback]
Signed-off-by: Rob Herring <robh@kernel.org>
As both the i.MX35 and i.MX53 flexcan IP cores are compatible to the i.MX25,
they are listed as:
compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
and:
compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
in the SoC device trees.
This patch fixes the following errors, which shows up during a dtbs_check:
arch/arm/boot/dts/imx53-ard.dt.yaml: can@53fc8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx53-flexcan', 'fsl,imx25-flexcan'] is too long
Additional items are not allowed ('fsl,imx25-flexcan' was unexpected)
'fsl,imx53-flexcan' is not one of ['fsl,imx7d-flexcan', 'fsl,imx6ul-flexcan', 'fsl,imx6sx-flexcan']
'fsl,imx53-flexcan' is not one of ['fsl,ls1028ar1-flexcan']
'fsl,imx6q-flexcan' was expected
'fsl,lx2160ar1-flexcan' was expected
From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
Fixes: e5ab9aa7e4 ("dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml")
Reported-by: Rob Herring <robh+dt@kernel.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201111130507.1560881-4-mkl@pengutronix.de
[robh: drop singular fsl,imx53-flexcan and fsl,imx35-flexcan]
Signed-off-by: Rob Herring <robh@kernel.org>
The fsl,stop-mode property is a phandle-array and should consist of one phandle
and two 32 bit integers, e.g.:
fsl,stop-mode = <&gpr 0x34 28>;
This patch fixes the following errors, which shows up during a dtbs_check:
arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: can@2090000: fsl,stop-mode: [[1, 52, 28]] is too short
From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
Fixes: e5ab9aa7e4 ("dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml")
Reported-by: Rob Herring <robh+dt@kernel.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201111130507.1560881-5-mkl@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Fix the fallout of the IPI as interrupt conversion in Kconfig and
the BCM2836 interrupt chip driver
- Fixes for interrupt affinity setting and the handling of
hierarchical irq domains in the SiFive PLIC driver
- Make the unmapped event handling in the TI SCI driver work
correctly
- A few minor fixes and cleanups in various chip drivers and Kconfig"
* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
irqchip/ti-sci-inta: Add support for unmapped event handling
dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
irqchip/sifive-plic: Fix chip_data access within a hierarchy
irqchip/sifive-plic: Fix broken irq_set_affinity() callback
irqchip/stm32-exti: Add all LP timer exti direct events support
irqchip/bcm2836: Fix missing __init annotation
irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
irqchip/mst: Make mst_intc_of_init static
irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc3, including fixes from wireless, can, and
netfilter subtrees.
Current merge window - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous releases - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
inner packet has IP_DF (don't fragment) set in its header (when
TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous releases - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need to
be dropped
- always clone the skbs to make sure they have a reference on the
socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200"
* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
ionic: check port ptr before use
r8169: work around short packet hw bug on RTL8125
net: openvswitch: silence suspicious RCU usage warning
chelsio/chtls: fix always leaking ctrl_skb
chelsio/chtls: fix memory leaks caused by a race
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
...
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
The new DMA architecture introduced with AM64 introduced new event types:
unampped events.
These events are mapped within INTA in contrast to other K3 devices where
the events with similar function was originating from the UDMAP or ringacc.
The ti,unmapped-event-sources should contain phandle array to the devices
in the system (typically DMA controllers) from where the unmapped events
originate.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201020073243.19255-2-peter.ujfalusi@ti.com
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bug fixes on top of -rc1, as most of
them were ready but didn't quite make it into the last-minute pull
requests for the merge window.
Allwinner:
- fix for incorrect CPU overtemperature limit
Amlogic:
- multiple smaller DT bugfixes, and missing device nodes
Marvell EBU:
- add missing aliases for ethernet switch ports on espressobin board
Marvell MMP:
- DTC warning fix
- bugfix for camera interface power-down
NXP i.MX:
- re-enable the GPIO driver on all defconfigs
ST STM32MP1:
- fix random crashes from incorrect voltage settings
Synaptics Berlin:
- enable the correct hardware timer driver
Texas Instruments K2G:
- fix a boot regression in the power domain code
TEE drivers:
- fix regression in TEE "login" method
SCMI drivers:
- multiple code fixes for corner cases in newly added code
MAINTAINERS file:
- move Kukjin Kim and Sangbeom Kim to credits (used to work on
Samsung Exynos)
- Masahiro Yamada is stepping down as Uniphier maintainer
I did not include a series of patches that work around a regression
caused by a bugfix in an ethernet phy driver that resulted in an
inadvertent DT binding change. This is still under discussion"
* tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: ti: ti_sci_pm_domains: check for proper args count in xlate
ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"
ARM: dts: mmp3: Add power domain for the camera
arm64: berlin: Select DW_APB_TIMER_OF
dt-bindings: sram: sunxi-sram: add V3s compatible string
MAINTAINERS: Move Sangbeom Kim to credits
MAINTAINERS: Move Kukjin Kim to credits
MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver
ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
arm64: defconfig: Build in CONFIG_GPIO_MXC by default
arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: amlogic: add missing ethernet reset ID
firmware: arm_scmi: Fix duplicate workqueue name
firmware: arm_scmi: Fix locking in notifications
...
Pull drm fixes from Dave Airlie:
"A busier rc2 than normal, have larger sets of fixes for amdgpu +
nouveau, along with some i915, docs, core, panel, sun4i, v3d, vc4
fixes.
Nothing spooky though or pumpkin related.
docs:
- kernel doc fixes
core:
- fix shmem helpers dma-buf mmap bug
amdgpu:
- Add new navi1x PCI ID
- GPUVM reserved area fixes
- Misc display fixes
- Fix bad interactions between display code and CONFIG_KGDB
- Fixes for SMU manual fan control and i2c
nouveau:
- endian regression fix for old gpus
- buffer object refcount fix
- uapi start/end alignment fix
- display notifier fix
- display clock checking fixes
i915:
- Fix max memory region size calculation
- Restore ILK-M RPS support, restoring performance
- Reject 90/270 degreerotated initial fbs
panel:
- mantix reset fixes
sun4i:
- scalar fix
vc4:
- hdmi audio fixes
v3d:
- fix double free"
* tag 'drm-fixes-2020-10-30-1' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()
drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()
drm/nouveau/device: fix changing endianess code to work on older GPUs
drm/nouveau/gem: fix "refcount_t: underflow; use-after-free"
drm/nouveau/kms/nv50-: Program notifier offset before requesting disp caps
drm/nouveau/nouveau: fix the start/end range for migration
drm/i915: Reject 90/270 degree rotated initial fbs
drm/i915: Restore ILK-M RPS support
drm/i915/region: fix max size calculation
drm/vc4: Rework the structure conversion functions
drm/vc4: hdmi: Add a name to the codec DAI component
drm/shme-helpers: Fix dma_buf_mmap forwarding bug
drm/vc4: hdmi: Avoid sleeping in atomic context
drm/amdgpu/pm: fix the fan speed in fan1_input in manual mode for navi1x
drm/amd/pm: fix the wrong fan speed in fan1_input
drm/amdgpu/swsmu: drop smu i2c bus on navi1x
drm/vc4: drv: Add error handding for bind
drm: drm_print.h: fix kernel-doc markups
drm: kernel-doc: drm_dp_helper.h: fix a typo
drm: kernel-doc: add description for a new function parameter
...
Another round of wack-a-mole. The json-schema default is additional
unknown properties are allowed, but for DT all properties should be
defined.
Signed-off-by: Rob Herring <robh@kernel.org>
We have a few leftovers from the merge window period in
drm-misc-next-fixes, let's bring them into drm-misc-fixes
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
