Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-18
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) verifier precision propagation fix, from Andrii.
2) BTF size fix for typedefs, from Andrii.
3) a bunch of big endian fixes, from Ilya.
4) wide load from bpf_sock_addr fixes, from Stanislav.
5) a bunch of misc fixes from a number of developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tracepoints to allow debugging of the event chain leading to
a pnfs fallback to doing I/O through the MDS.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.3 merge window:
- Code fixes and cleanups
- Fix bug where set_memory_x() wasn't being called when rodata=n
- Fix bug where -EEXIST was being returned for going modules
- Allow arches to override module_exit_section()"
* tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: fix compile error if don't have strict module rwx
ARM: module: recognize unwind exit sections
module: allow arch overrides for .exit section names
modules: fix BUG when load module with rodata=n
kernel/module: Fix mem leak in module_add_modinfo_attrs
kernel: module: Use struct_size() helper
kernel/module.c: Only return -EEXIST for modules that have finished loading
On x86-64, with CONFIG_RETPOLINE=n, GCC's "global common subexpression
elimination" optimization results in ___bpf_prog_run()'s jumptable code
changing from this:
select_insn:
jmp *jumptable(, %rax, 8)
...
ALU64_ADD_X:
...
jmp *jumptable(, %rax, 8)
ALU_ADD_X:
...
jmp *jumptable(, %rax, 8)
to this:
select_insn:
mov jumptable, %r12
jmp *(%r12, %rax, 8)
...
ALU64_ADD_X:
...
jmp *(%r12, %rax, 8)
ALU_ADD_X:
...
jmp *(%r12, %rax, 8)
The jumptable address is placed in a register once, at the beginning of
the function. The function execution can then go through multiple
indirect jumps which rely on that same register value. This has a few
issues:
1) Objtool isn't smart enough to be able to track such a register value
across multiple recursive indirect jumps through the jump table.
2) With CONFIG_RETPOLINE enabled, this optimization actually results in
a small slowdown. I measured a ~4.7% slowdown in the test_bpf
"tcpdump port 22" selftest.
This slowdown is actually predicted by the GCC manual:
Note: When compiling a program using computed gotos, a GCC
extension, you may get better run-time performance if you
disable the global common subexpression elimination pass by
adding -fno-gcse to the command line.
So just disable the optimization for this function.
Fixes: e55a73251d ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/30c3ca29ba037afcbd860a8672eef0021addf9fe.1563413318.git.jpoimboe@redhat.com
Pull tracing updates from Steven Rostedt:
"The main changes in this release include:
- Add user space specific memory reading for kprobes
- Allow kprobes to be executed earlier in boot
The rest are mostly just various clean ups and small fixes"
* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Make trace_get_fields() global
tracing: Let filter_assign_type() detect FILTER_PTR_STRING
tracing: Pass type into tracing_generic_entry_update()
ftrace/selftest: Test if set_event/ftrace_pid exists before writing
ftrace/selftests: Return the skip code when tracing directory not configured in kernel
tracing/kprobe: Check registered state using kprobe
tracing/probe: Add trace_event_call accesses APIs
tracing/probe: Add probe event name and group name accesses APIs
tracing/probe: Add trace flag access APIs for trace_probe
tracing/probe: Add trace_event_file access APIs for trace_probe
tracing/probe: Add trace_event_call register API for trace_probe
tracing/probe: Add trace_probe init and free functions
tracing/uprobe: Set print format when parsing command
tracing/kprobe: Set print format right after parsed command
kprobes: Fix to init kprobes in subsys_initcall
tracepoint: Use struct_size() in kmalloc()
ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
ftrace: Enable trampoline when rec count returns back to one
tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
tracing: Make a separate config for trace event self tests
...
Pull ceph updates from Ilya Dryomov:
"Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported for
now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing
inconsistencies with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer"
* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
ceph: fix end offset in truncate_inode_pages_range call
ceph: use generic_delete_inode() for ->drop_inode
ceph: use ceph_evict_inode to cleanup inode's resource
ceph: initialize superblock s_time_gran to 1
MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
rbd: setallochint only if object doesn't exist
rbd: support for object-map and fast-diff
rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
libceph: export osd_req_op_data() macro
libceph: change ceph_osdc_call() to take page vector for response
libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
rbd: new exclusive lock wait/wake code
rbd: quiescing lock should wait for image requests
rbd: lock should be quiesced on reacquire
rbd: introduce copyup state machine
rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
rbd: move OSD request allocation into object request state machines
rbd: factor out __rbd_osd_setup_discard_ops()
rbd: factor out rbd_osd_setup_copyup()
rbd: introduce obj_req->osd_reqs list
...
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
Pull more power management updates from Rafael Wysocki:
"These modify the Intel RAPL driver to allow it to use an MMIO
interface to the hardware, make the int340X thermal driver provide
such an interface for it, add Intel Ice Lake CPU IDs to the RAPL
driver (these changes depend on the previously merged x86 arch
changes), update cpufreq to use the PM QoS framework for managing the
min and max frequency limits, and add update the imx-cpufreq-dt
cpufreq driver to support i.MX8MN.
Specifics:
- Add MMIO interface support to the Intel RAPL power capping driver
and update the int340X thermal driver to provide a RAPL MMIO
interface (Zhang Rui, Stephen Rothwell).
- Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh
Bhardwaj).
- Make cpufreq use the PM QoS framework (instead of notifiers) for
managing the min and max frequency constraints (Viresh Kumar).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang)"
* tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
cpufreq: Make cpufreq_generic_init() return void
intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state
powercap/rapl: Add Ice Lake NNPI support to RAPL driver
powercap/intel_rapl: add support for ICX-D
powercap/intel_rapl: add support for ICX
powercap/intel_rapl: add support for IceLake desktop
intel_rapl: Fix module autoloading issue
int340X/processor_thermal_device: add support for MMIO RAPL
intel_rapl: support two power limits for every RAPL domain
intel_rapl: support 64 bit register
intel_rapl: abstract RAPL common code
intel_rapl: cleanup hardcoded MSR access
intel_rapl: cleanup some functions
intel_rapl: abstract register access operations
intel_rapl: abstract register address
intel_rapl: introduce struct rapl_if_private
intel_rapl: introduce intel_rapl.h
intel_rapl: remove hardcoded register index
intel_rapl: use reg instead of msr
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
...
Pull more ACPI updates from Rafael Wysocki:
"These get rid of two clang warnings, add a new quirk mechanism to the
ACPI backlight driver (and apply it to one machine) and update the
table load object initialization in ACPICA (this is a replacement for
a previously reverted ACPICA commit).
Specifics:
- Make ACPI table loading work more consistently regardless of the
exact mechanism used for loading a table (Erik Schmauss).
- Get rid of two clang warnings (Arnd Bergmann).
- Add new quirk mechanism to the ACPI backlight driver and use it to
add a quirk for PB Easynote MZ35 (Hans de Goede)"
* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
ACPI: fix false-positive -Wuninitialized warning
ACPI: blacklist: fix clang warning for unused DMI table
ACPICA: Update table load object initialization
* pm-cpufreq:
cpufreq: Make cpufreq_generic_init() return void
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Add QoS requests for userspace constraints
cpufreq: intel_pstate: Reuse refresh_frequency_limits()
cpufreq: Register notifiers with the PM QoS framework
PM / QoS: Add support for MIN/MAX frequency constraints
PM / QOS: Pass request type to dev_pm_qos_read_value()
PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value()
PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
Add a per-transport maximum limit in the socket case, and add
helpers to allow the NFSv4 code to discover that limit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull another x86 platform driver update from Andy Shevchenko:
"Provide better naming for ABI, i.e. tell that we have fan boost mode.
It won't break any ABI, but has to be done now to avoid confusion in
the future"
* tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: asus: Rename "fan mode" to "fan boost mode"
Pull hwspinlock updates from Bjorn Andersson:
"This contains support for hardware spinlock TI K3 AM65x and J721E
family of SoCs, support for using hwspinlocks from atomic context and
better error reporting when dealing with hardware disabled in
DeviceTree"
* tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc:
hwspinlock: add the 'in_atomic' API
hwspinlock: document the hwspinlock 'raw' API
hwspinlock: stm32: implement the relax() ops
hwspinlock: ignore disabled device
hwspinlock/omap: Add a trace during probe
hwspinlock/omap: Add support for TI K3 SoCs
dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.
Also initial support for vendor specific resource table entries and
support for unprocessed Qualcomm firmware files"
* tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
remoteproc: stm32: fix building without ARM SMCC
remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
remoteproc: copy parent dma_pfn_offset for vdev
remoteproc: qcom: q6v5-mss: Support loading non-split images
soc: qcom: mdt_loader: Support loading non-split images
remoteproc: stm32: add an ST stm32_rproc driver
dt-bindings: remoteproc: add bindings for stm32 remote processor driver
dt-bindings: stm32: add bindings for ML-AHB interconnect
remoteproc: Use struct_size() helper
remoteproc: add vendor resources handling
remoteproc: imx: Fix typo in "failed"
remoteproc: imx: Broaden the Kconfig selection logic
remoteproc,rpmsg: add missing MAINTAINERS file entries
remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
DM provided its own ratelimiting printk wrapper but given printk
advances this is no longer needed.
Also, switching DMDEBUG_LIMIT to using pr_debug_ratelimited() fixes the
reported issue where DMDEBUG_LIMIT() still caused a flood of "callbacks
suppressed" messages.
Reported-by: Milan Broz <gmazyland@gmail.com>
Depends-on: 29fc2bc753 ("printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
Pull dmaengine updates from Vinod Koul:
- Add support in dmaengine core to do device node checks for DT devices
and update bunch of drivers to use that and remove open coding from
drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
Documentation: dmaengine: clean up description of dmatest usage
dmaengine: tegra210-adma: remove PM_CLK dependency
dmaengine: fsl-edma: add i.mx7ulp edma2 version support
dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
dmaengine: fsl-edma-common: version check for v2 instead
dmaengine: fsl-edma-common: move dmamux register to another single function
dmaengine: fsl-edma: add drvdata for fsl-edma
dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
dmaengine: rcar-dmac: Reject zero-length slave DMA requests
dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
dmaengine: dw-edma: fix semicolon.cocci warnings
dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
dmaengine: dmatest: timeout value of -1 should specify infinite wait
dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
dmaengine: fsl-edma: support little endian for edma driver
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
dmagengine: pl330: add code to get reset property
dt-bindings: pl330: document the optional resets property
...
The Asus WMI spec indicates that the function being controlled here
is called "Fan Boost Mode". The user-facing documentation also calls it
this.
The spec uses the term "fan mode" is used to refer to other things,
including functionality expected to appear on future products.
We missed this before as we are not dealing with the most readable of
specs, and didn't forsee any confusion around shortening the name.
Rename "fan mode" to "fan boost mode" to improve consistency with the
spec and to avoid a future naming conflict.
There is no interface breakage here since this has yet to be included
in an official kernel release. I also updated the kernel version listed
under ABI accordingly.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Merge more updates from Andrew Morton:
"VM:
- z3fold fixes and enhancements by Henry Burns and Vitaly Wool
- more accurate reclaimed slab caches calculations by Yafang Shao
- fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
Christoph Hellwig
- !CONFIG_MMU fixes by Christoph Hellwig
- new novmcoredd parameter to omit device dumps from vmcore, by
Kairui Song
- new test_meminit module for testing heap and pagealloc
initialization, by Alexander Potapenko
- ioremap improvements for huge mappings, by Anshuman Khandual
- generalize kprobe page fault handling, by Anshuman Khandual
- device-dax hotplug fixes and improvements, by Pavel Tatashin
- enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V
- add pte_devmap() support for arm64, by Robin Murphy
- unify locked_vm accounting with a helper, by Daniel Jordan
- several misc fixes
core/lib:
- new typeof_member() macro including some users, by Alexey Dobriyan
- make BIT() and GENMASK() available in asm, by Masahiro Yamada
- changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
code generation, by Alexey Dobriyan
- rbtree code size optimizations, by Michel Lespinasse
- convert struct pid count to refcount_t, by Joel Fernandes
get_maintainer.pl:
- add --no-moderated switch to skip moderated ML's, by Joe Perches
misc:
- ptrace PTRACE_GET_SYSCALL_INFO interface
- coda updates
- gdb scripts, various"
[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
fs/select.c: use struct_size() in kmalloc()
mm: add account_locked_vm utility function
arm64: mm: implement pte_devmap support
mm: introduce ARCH_HAS_PTE_DEVMAP
mm: clean up is_device_*_page() definitions
mm/mmap: move common defines to mman-common.h
mm: move MAP_SYNC to asm-generic/mman-common.h
device-dax: "Hotremove" persistent memory that is used like normal RAM
mm/hotplug: make remove_memory() interface usable
device-dax: fix memory and resource leak if hotplug fails
include/linux/lz4.h: fix spelling and copy-paste errors in documentation
ipc/mqueue.c: only perform resource calculation if user valid
include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
scripts/gdb: add helpers to find and list devices
scripts/gdb: add lx-genpd-summary command
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
kernel/pid.c: convert struct pid count to refcount_t
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
...
Move internal function declarations out of fs/internal.h into
include/linux/iomap.h so that our transition is complete.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the direct IO code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We used to need rather convoluted ordering trickery to guarantee
that dput() of ex-mountpoints happens before the final mntput()
of the same. Since we don't need that anymore, there's no point
playing with fs_pin for that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
details of the syscall the tracee is blocked in.
There are two reasons for a special syscall-related ptrace request.
Firstly, with the current ptrace API there are cases when ptracer cannot
retrieve necessary information about syscalls. Some examples include:
* The notorious int-0x80-from-64-bit-task issue. See [1] for details.
In short, if a 64-bit task performs a syscall through int 0x80, its
tracer has no reliable means to find out that the syscall was, in
fact, a compat syscall, and misidentifies it.
* Syscall-enter-stop and syscall-exit-stop look the same for the
tracer. Common practice is to keep track of the sequence of
ptrace-stops in order not to mix the two syscall-stops up. But it is
not as simple as it looks; for example, strace had a (just recently
fixed) long-standing bug where attaching strace to a tracee that is
performing the execve system call led to the tracer identifying the
following syscall-exit-stop as syscall-enter-stop, which messed up
all the state tracking.
* Since the introduction of commit 84d77d3f06 ("ptrace: Don't allow
accessing an undumpable mm"), both PTRACE_PEEKDATA and
process_vm_readv become unavailable when the process dumpable flag is
cleared. On such architectures as ia64 this results in all syscall
arguments being unavailable for the tracer.
Secondly, ptracers also have to support a lot of arch-specific code for
obtaining information about the tracee. For some architectures, this
requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
argument and return value.
ptrace(2) man page:
long ptrace(enum __ptrace_request request, pid_t pid,
void *addr, void *data);
...
PTRACE_GET_SYSCALL_INFO
Retrieve information about the syscall that caused the stop.
The information is placed into the buffer pointed by "data"
argument, which should be a pointer to a buffer of type
"struct ptrace_syscall_info".
The "addr" argument contains the size of the buffer pointed to
by "data" argument (i.e., sizeof(struct ptrace_syscall_info)).
The return value contains the number of bytes available
to be written by the kernel.
If the size of data to be written by the kernel exceeds the size
specified by "addr" argument, the output is truncated.
[ldv@altlinux.org: selftests/seccomp/seccomp_bpf: update for PTRACE_GET_SYSCALL_INFO]
Link: http://lkml.kernel.org/r/20190708182904.GA12332@altlinux.org
Link: http://lkml.kernel.org/r/20190510152842.GF28558@altlinux.org
Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org>
Co-developed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As was already noted in rbtree.h, the logic to cache rb_first (or
rb_last) can easily be implemented externally to the core rbtree api.
Change the implementation to do just that. Previously the update of
rb_leftmost was wired deeper into the implmentation, but there were some
disadvantages to that - mostly, lib/rbtree.c had separate instantiations
for rb_insert_color() vs rb_insert_color_cached(), as well as rb_erase()
vs rb_erase_cached(), which were doing exactly the same thing save for
the rb_leftmost update at the start of either function.
text data bss dec hex filename
5405 120 0 5525 1595 lib/rbtree.o-vanilla
3827 96 0 3923 f53 lib/rbtree.o-patch
[dave@stgolabs.net: changelog addition]
Link: http://lkml.kernel.org/r/20190628171416.by5gdizl3rcxk5h5@linux-r8p5
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190628045008.39926-1-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
BIT(), GENMASK(), etc. are useful to define register bits of hardware.
However, low-level code is often written in assembly, where they are
not available due to the hard-coded 1UL, 0UL.
In fact, in-kernel headers such as arch/arm64/include/asm/sysreg.h
use _BITUL() instead of BIT() so that the register bit macros are
available in assembly.
Using macros in include/uapi/linux/const.h have two reasons:
[1] For use in uapi headers
We should use underscore-prefixed variants for user-space.
[2] For use in assembly code
Since _BITUL() uses UL(1) instead of 1UL, it can be used as an
alternative of BIT().
For [2], it is pretty easy to change BIT() etc. for use in assembly.
This allows to replace _BUTUL() in kernel-space headers with BIT().
Link: http://lkml.kernel.org/r/20190609153941.17249-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The whole header file deals with swap entries and PTEs, none of which
can exist for nommu builds. The current nommu ports have lots of stubs
to allow the inline functions in swapops.h to compile, but as none of
this functionality is actually used there is no point in even providing
it. This way we don't have to provide the stubs for the upcoming RISC-V
nommu port, and can eventually remove it from the existing ports.
Link: http://lkml.kernel.org/r/20190703122359.18200-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a device doesn't support DMA to a physical address that includes the
encryption bit (currently bit 47, so 48-bit DMA), then the DMA must
occur to unencrypted memory. SWIOTLB is used to satisfy that requirement
if an IOMMU is not active (enabled or configured in passthrough mode).
However, commit fafadcd165 ("swiotlb: don't dip into swiotlb pool for
coherent allocations") modified the coherent allocation support in
SWIOTLB to use the DMA direct coherent allocation support. When an IOMMU
is not active, this resulted in dma_alloc_coherent() failing for devices
that didn't support DMA addresses that included the encryption bit.
Addressing this requires changes to the force_dma_unencrypted() function
in kernel/dma/direct.c. Since the function is now non-trivial and
SME/SEV specific, update the DMA direct support to add an arch override
for the force_dma_unencrypted() function. The arch override is selected
when CONFIG_AMD_MEM_ENCRYPT is set. The arch override function resides in
the arch/x86/mm/mem_encrypt.c file and forces unencrypted DMA when either
SEV is active or SME is active and the device does not support DMA to
physical addresses that include the encryption bit.
Fixes: fafadcd165 ("swiotlb: don't dip into swiotlb pool for coherent allocations")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
[hch: moved the force_dma_unencrypted declaration to dma-mapping.h,
fold the s390 fix from Halil Pasic]
Signed-off-by: Christoph Hellwig <hch@lst.de>
