deec4e9c079a1b498844ded7be22f89f7f25c5eb
79 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Kroah-Hartman
|
674d2ac211 |
Merge 5.10.62 into android12-5.10-lts
Changes in 5.10.62 net: qrtr: fix another OOB Read in qrtr_endpoint_post bpf: Fix ringbuf helper function compatibility bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper ASoC: rt5682: Adjust headset volume button threshold ASoC: component: Remove misplaced prefix handling in pin control functions ARC: Fix CONFIG_STACKDEPOT netfilter: conntrack: collect all entries in one cycle once: Fix panic when module unload blk-iocost: fix lockdep warning on blkcg->lock ovl: fix uninitialized pointer read in ovl_lookup_real_one() net: mscc: Fix non-GPL export of regmap APIs can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters ceph: correctly handle releasing an embedded cap flush riscv: Ensure the value of FP registers in the core dump file is up to date Revert "btrfs: compression: don't try to compress if we don't have enough pages" drm/amdgpu: Cancel delayed work when GFXOFF is disabled Revert "USB: serial: ch341: fix character loss at high transfer rates" USB: serial: option: add new VID/PID to support Fibocom FG150 usb: renesas-xhci: Prefer firmware loading on unknown ROM state usb: dwc3: gadget: Fix dwc3_calc_trbs_left() usb: dwc3: gadget: Stop EP0 transfers during pullup disable scsi: core: Fix hang of freezing queue between blocking and running device RDMA/bnxt_re: Add missing spin lock initialization IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs() RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init() ice: do not abort devlink info if board identifier can't be found net: usb: pegasus: fixes of set_register(s) return value evaluation; igc: fix page fault when thunderbolt is unplugged igc: Use num_tx_queues when iterating over tx_ring queue e1000e: Fix the max snoop/no-snoop latency for 10M e1000e: Do not take care about recovery NVM checksum RDMA/efa: Free IRQ vectors on error flow ip_gre: add validation for csum_start xgene-v2: Fix a resource leak in the error handling path of 'xge_probe()' net: marvell: fix MVNETA_TX_IN_PRGRS bit number ucounts: Increase ucounts reference counter before the security hook net/sched: ets: fix crash when flipping from 'strict' to 'quantum' ipv6: use siphash in rt6_exception_hash() ipv4: use siphash instead of Jenkins in fnhe_hashfun() cxgb4: dont touch blocked freelist bitmap after free rtnetlink: Return correct error on changing device netns net: hns3: clear hardware resource when loading driver net: hns3: add waiting time before cmdq memory is released net: hns3: fix duplicate node in VLAN list net: hns3: fix get wrong pfc_en when query PFC configuration Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711" net: stmmac: add mutex lock to protect est parameters net: stmmac: fix kernel panic due to NULL pointer dereference of plat->est drm/i915: Fix syncmap memory leak usb: gadget: u_audio: fix race condition on endpoint stop dt-bindings: sifive-l2-cache: Fix 'select' matching perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32 clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference iwlwifi: pnvm: accept multiple HW-type TLVs opp: remove WARN when no valid OPPs remain cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev virtio: Improve vq->broken access to avoid any compiler optimization virtio_pci: Support surprise removal of virtio pci device virtio_vdpa: reject invalid vq indices vringh: Use wiov->used to check for read/write desc order tools/virtio: fix build qed: qed ll2 race condition fixes qed: Fix null-pointer dereference in qed_rdma_create_qp() Revert "drm/amd/pm: fix workload mismatch on vega10" drm/amd/pm: change the workload type for some cards blk-mq: don't grab rq's refcount in blk_mq_check_expired() drm: Copy drm_wait_vblank to user before returning drm/nouveau/disp: power down unused DP links during init drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences net/rds: dma_map_sg is entitled to merge entries btrfs: fix race between marking inode needs to be logged and log syncing pipe: avoid unnecessary EPOLLET wakeups under normal loads pipe: do FASYNC notifications for every pipe IO, not just state changes mtd: spinand: Fix incorrect parameters for on-die ECC tipc: call tipc_wait_for_connect only when dlen is not 0 vt_kdsetmode: extend console locking Bluetooth: btusb: check conditions before enabling USB ALT 3 for WBS riscv: Fixup wrong ftrace remove cflag riscv: Fixup patch_text panic in ftrace perf env: Fix memory leak of bpf_prog_info_linear member perf symbol-elf: Fix memory leak by freeing sdt_note.args perf record: Fix memory leak in vDSO found using ASAN perf tools: Fix arm64 build error with gcc-11 perf annotate: Fix jump parsing for C++ code. powerpc/perf: Invoke per-CPU variable access with disabled interrupts srcu: Provide internal interface to start a Tree SRCU grace period srcu: Provide polling interfaces for Tree SRCU grace periods srcu: Provide internal interface to start a Tiny SRCU grace period srcu: Make Tiny SRCU use multi-bit grace-period counter srcu: Provide polling interfaces for Tiny SRCU grace periods tracepoint: Use rcu get state and cond sync for static call updates usb: typec: ucsi: acpi: Always decode connector change information usb: typec: ucsi: Work around PPM losing change information usb: typec: ucsi: Clear pending after acking connector change net: dsa: mt7530: fix VLAN traffic leaks again lkdtm: Enable DOUBLE_FAULT on all architectures arm64: dts: qcom: msm8994-angler: Fix gpio-reserved-ranges 85-88 btrfs: fix NULL pointer dereference when deleting device by invalid id kthread: Fix PF_KTHREAD vs to_kthread() race Revert "floppy: reintroduce O_NDELAY fix" Revert "parisc: Add assembly implementations for memset, strlen, strcpy, strncpy and strcat" net: don't unconditionally copy_from_user a struct ifreq for socket ioctls audit: move put_tree() to avoid trim_trees refcount underflow and UAF bpf: Fix potentially incorrect results with bpf_get_local_storage() Linux 5.10.62 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I5a9bf4b2c254ae21a10f838494cae1c3fa016be3 |
||
|
Mathieu Desnoyers
|
9a4f1dc8a1 |
tracepoint: Use rcu get state and cond sync for static call updates
commit 7b40066c97ec66a44e388f82fcf694987451768f upstream.
State transitions from 1->0->1 and N->2->1 callbacks require RCU
synchronization. Rather than performing the RCU synchronization every
time the state change occurs, which is quite slow when many tracepoints
are registered in batch, instead keep a snapshot of the RCU state on the
most recent transitions which belong to a chain, and conditionally wait
for a grace period on the last transition of the chain if one g.p. has
not elapsed since the last snapshot.
This applies to both RCU and SRCU.
This brings the performance regression caused by commit 231264d6927f
("Fix: tracepoint: static call function vs data state mismatch") back to
what it was originally.
Before this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m10.593s
user 0m0.017s
sys 0m0.259s
After this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m0.878s
user 0m0.000s
sys 0m0.103s
Link: https://lkml.kernel.org/r/20210805192954.30688-1-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: 231264d6927f ("Fix: tracepoint: static call function vs data state mismatch")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Greg Kroah-Hartman
|
af3bdb4304 |
Merge 5.10.58 into android12-5.10-lts
Changes in 5.10.58 Revert "ACPICA: Fix memory leak caused by _CID repair function" ALSA: seq: Fix racy deletion of subscriber bus: ti-sysc: Fix gpt12 system timer issue with reserved status net: xfrm: fix memory leak in xfrm_user_rcv_msg arm64: dts: ls1028a: fix node name for the sysclk ARM: imx: add missing iounmap() ARM: imx: add missing clk_disable_unprepare() ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms arm64: dts: ls1028: sl28: fix networking for variant 2 ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode ALSA: usb-audio: fix incorrect clock source setting clk: stm32f4: fix post divisor setup for I2S/SAI PLLs ARM: dts: am437x-l4: fix typo in can@0 node omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state clk: tegra: Implement disable_unused() of tegra_clk_sdmmc_mux_ops dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation scsi: sr: Return correct event when media event code is 3 media: videobuf2-core: dequeue if start_streaming fails ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM dmaengine: imx-dma: configure the generic DMA type to make it work net, gro: Set inner transport header offset in tcp/udp GRO hook net: dsa: sja1105: overwrite dynamic FDB entries with static ones in .port_fdb_add net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with statically added ones net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too net: dsa: sja1105: match FDB entries regardless of inner/outer VLAN tag net: phy: micrel: Fix detection of ksz87xx switch net: natsemi: Fix missing pci_disable_device() in probe and remove gpio: tqmx86: really make IRQ optional RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recently sctp: move the active_key update after sh_keys is added nfp: update ethtool reporting of pauseframe control net: ipv6: fix returned variable type in ip6_skb_dst_mtu net: dsa: qca: ar9331: reorder MDIO write sequence net: sched: fix lockdep_set_class() typo error for sch->seqlock MIPS: check return value of pgtable_pmd_page_ctor mips: Fix non-POSIX regexp bnx2x: fix an error code in bnx2x_nic_load() net: pegasus: fix uninit-value in get_interrupt_interval net: fec: fix use-after-free in fec_drv_remove net: vxge: fix use-after-free in vxge_device_unregister blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit() Bluetooth: defer cleanup of resources in hci_unregister_dev() USB: usbtmc: Fix RCU stall warning USB: serial: option: add Telit FD980 composition 0x1056 USB: serial: ch341: fix character loss at high transfer rates USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2 firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback firmware_loader: fix use-after-free in firmware_fallback_sysfs drm/amdgpu/display: fix DMUB firmware version info ALSA: pcm - fix mmap capability check for the snd-dummy driver ALSA: hda/realtek: add mic quirk for Acer SF314-42 ALSA: hda/realtek: Fix headset mic for Acer SWIFT SF314-56 (ALC256) ALSA: usb-audio: Fix superfluous autosuspend recovery ALSA: usb-audio: Add registration quirk for JBL Quantum 600 usb: dwc3: gadget: Avoid runtime resume if disabling pullup usb: gadget: remove leaked entry from udc driver list usb: cdns3: Fixed incorrect gadget state usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers usb: gadget: f_hid: fixed NULL pointer dereference usb: gadget: f_hid: idle uses the highest byte for duration usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events usb: otg-fsm: Fix hrtimer list corruption clk: fix leak on devm_clk_bulk_get_all() unwind scripts/tracing: fix the bug that can't parse raw_trace_func tracing / histogram: Give calculation hist_fields a size tracing: Reject string operand in the histogram expression tracing: Fix NULL pointer dereference in start_creating tracepoint: static call: Compare data on transition from 2->1 callees tracepoint: Fix static call function vs data state mismatch arm64: stacktrace: avoid tracing arch_stack_walk() optee: Clear stale cache entries during initialization tee: add tee_shm_alloc_kernel_buf() optee: Fix memory leak when failing to register shm pages optee: Refuse to load the driver under the kdump kernel optee: fix tee out of memory failure seen during kexec reboot tpm_ftpm_tee: Free and unregister TEE shared memory during kexec staging: rtl8723bs: Fix a resource leak in sd_int_dpc staging: rtl8712: get rid of flush_scheduled_work staging: rtl8712: error handling refactoring drivers core: Fix oops when driver probe fails media: rtl28xxu: fix zero-length control request pipe: increase minimum default pipe size to 2 pages ext4: fix potential htree corruption when growing large_dir directories serial: tegra: Only print FIFO error message when an error occurs serial: 8250_mtk: fix uart corruption issue when rx power off serial: 8250: Mask out floating 16/32-bit bus bits MIPS: Malta: Do not byte-swap accesses to the CBUS UART serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts. fpga: dfl: fme: Fix cpu hotplug issue in performance reporting timers: Move clearing of base::timer_running under base:: Lock xfrm: Fix RCU vs hash_resize_mutex lock inversion net/xfrm/compat: Copy xfrm_spdattr_type_t atributes pcmcia: i82092: fix a null pointer dereference bug selinux: correct the return value when loads initial sids bus: ti-sysc: AM3: RNG is GP only Revert "gpio: mpc8xxx: change the gpio interrupt flags." ARM: omap2+: hwmod: fix potential NULL pointer access md/raid10: properly indicate failure when ending a failed write request KVM: x86: accept userspace interrupt only if no event is injected KVM: Do not leak memory for duplicate debugfs directories KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds arm64: vdso: Avoid ISB after reading from cntvct_el0 soc: ixp4xx: fix printing resources interconnect: Fix undersized devress_alloc allocation spi: meson-spicc: fix memory leak in meson_spicc_remove interconnect: Zero initial BW after sync-state interconnect: Always call pre_aggregate before aggregate interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes drm/i915: Correct SFC_DONE register offset soc: ixp4xx/qmgr: fix invalid __iomem access perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest sched/rt: Fix double enqueue caused by rt_effective_prio drm/i915: avoid uninitialised var in eb_parse() libata: fix ata_pio_sector for CONFIG_HIGHMEM reiserfs: add check for root_inode in reiserfs_fill_super reiserfs: check directory items on read from disk virt_wifi: fix error on connect net: qede: Fix end of loop tests for list_for_each_entry alpha: Send stop IPI to send to online CPUs net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset smb3: rc uninitialized in one fallocate path drm/amdgpu/display: only enable aux backlight control for OLED panels arm64: fix compat syscall return truncation Linux 5.10.58 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I2533667974c9dff419a14d63e0e8febfb3de80f1 |
||
|
Mathieu Desnoyers
|
7799ad4d18 |
tracepoint: Fix static call function vs data state mismatch
commit 231264d6927f6740af36855a622d0e240be9d94c upstream.
On a 1->0->1 callbacks transition, there is an issue with the new
callback using the old callback's data.
Considering __DO_TRACE_CALL:
do { \
struct tracepoint_func *it_func_ptr; \
void *__data; \
it_func_ptr = \
rcu_dereference_raw((&__tracepoint_##name)->funcs); \
if (it_func_ptr) { \
__data = (it_func_ptr)->data; \
----> [ delayed here on one CPU (e.g. vcpu preempted by the host) ]
static_call(tp_func_##name)(__data, args); \
} \
} while (0)
It has loaded the tp->funcs of the old callback, so it will try to use the old
data. This can be fixed by adding a RCU sync anywhere in the 1->0->1
transition chain.
On a N->2->1 transition, we need an rcu-sync because you may have a
sequence of 3->2->1 (or 1->2->1) where the element 0 data is unchanged
between 2->1, but was changed from 3->2 (or from 1->2), which may be
observed by the static call. This can be fixed by adding an
unconditional RCU sync in transition 2->1.
Note, this fixes a correctness issue at the cost of adding a tremendous
performance regression to the disabling of tracepoints.
Before this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m0.778s
user 0m0.000s
sys 0m0.061s
After this commit:
# trace-cmd start -e all
# time trace-cmd start -p nop
real 0m10.593s
user 0m0.017s
sys 0m0.259s
A follow up fix will introduce a more lightweight scheme based on RCU
get_state and cond_sync, that will return the performance back to what it
was. As both this change and the lightweight versions are complex on their
own, for bisecting any issues that this may cause, they are kept as two
separate changes.
Link: https://lkml.kernel.org/r/20210805132717.23813-3-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes:
|
||
|
Mathieu Desnoyers
|
14673e1929 |
tracepoint: static call: Compare data on transition from 2->1 callees
commit f7ec4121256393e1d03274acdca73eb18958f27e upstream.
On transition from 2->1 callees, we should be comparing .data rather
than .func, because the same callback can be registered twice with
different data, and what we care about here is that the data of array
element 0 is unchanged to skip rcu sync.
Link: https://lkml.kernel.org/r/20210805132717.23813-2-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes:
|
||
|
Greg Kroah-Hartman
|
e4cac2c332 |
Merge 5.10.54 into android12-5.10-lts
Changes in 5.10.54
igc: Fix use-after-free error during reset
igb: Fix use-after-free error during reset
igc: change default return of igc_read_phy_reg()
ixgbe: Fix an error handling path in 'ixgbe_probe()'
igc: Fix an error handling path in 'igc_probe()'
igb: Fix an error handling path in 'igb_probe()'
fm10k: Fix an error handling path in 'fm10k_probe()'
e1000e: Fix an error handling path in 'e1000_probe()'
iavf: Fix an error handling path in 'iavf_probe()'
igb: Check if num of q_vectors is smaller than max before array access
igb: Fix position of assignment to *ring
gve: Fix an error handling path in 'gve_probe()'
net: add kcov handle to skb extensions
bonding: fix suspicious RCU usage in bond_ipsec_add_sa()
bonding: fix null dereference in bond_ipsec_add_sa()
ixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops
bonding: fix suspicious RCU usage in bond_ipsec_del_sa()
bonding: disallow setting nested bonding + ipsec offload
bonding: Add struct bond_ipesc to manage SA
bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()
bonding: fix incorrect return value of bond_ipsec_offload_ok()
ipv6: fix 'disable_policy' for fwd packets
stmmac: platform: Fix signedness bug in stmmac_probe_config_dt()
selftests: icmp_redirect: remove from checking for IPv6 route get
selftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect
pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped
cxgb4: fix IRQ free race during driver unload
mptcp: fix warning in __skb_flow_dissect() when do syn cookie for subflow join
nvme-pci: do not call nvme_dev_remove_admin from nvme_remove
KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM
perf inject: Fix dso->nsinfo refcounting
perf map: Fix dso->nsinfo refcounting
perf probe: Fix dso->nsinfo refcounting
perf env: Fix sibling_dies memory leak
perf test session_topology: Delete session->evlist
perf test event_update: Fix memory leak of evlist
perf dso: Fix memory leak in dso__new_map()
perf test maps__merge_in: Fix memory leak of maps
perf env: Fix memory leak of cpu_pmu_caps
perf report: Free generated help strings for sort option
perf script: Fix memory 'threads' and 'cpus' leaks on exit
perf lzma: Close lzma stream on exit
perf probe-file: Delete namelist in del_events() on the error path
perf data: Close all files in close_dir()
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
ASoC: wm_adsp: Correct wm_coeff_tlv_get handling
spi: imx: add a check for speed_hz before calculating the clock
spi: stm32: fixes pm_runtime calls in probe/remove
regulator: hi6421: Use correct variable type for regmap api val argument
regulator: hi6421: Fix getting wrong drvdata
spi: mediatek: fix fifo rx mode
ASoC: rt5631: Fix regcache sync errors on resume
bpf, test: fix NULL pointer dereference on invalid expected_attach_type
bpf: Fix tail_call_reachable rejection for interpreter when jit failed
xdp, net: Fix use-after-free in bpf_xdp_link_release
timers: Fix get_next_timer_interrupt() with no timers pending
liquidio: Fix unintentional sign extension issue on left shift of u16
s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]
bpf, sockmap: Fix potential memory leak on unlikely error case
bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc stats
bpf, sockmap, udp: sk_prot needs inuse_idx set for proc stats
bpftool: Check malloc return value in mount_bpffs_for_pin
net: fix uninit-value in caif_seqpkt_sendmsg
usb: hso: fix error handling code of hso_create_net_device
dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable}
efi/tpm: Differentiate missing and invalid final event log table.
net: decnet: Fix sleeping inside in af_decnet
KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
net: sched: fix memory leak in tcindex_partial_destroy_work
sctp: trim optlen when it's a huge value in sctp_setsockopt
netrom: Decrease sock refcount when sock timers expire
scsi: iscsi: Fix iface sysfs attr detection
scsi: target: Fix protect handling in WRITE SAME(32)
spi: cadence: Correct initialisation of runtime PM again
ACPI: Kconfig: Fix table override from built-in initrd
bnxt_en: don't disable an already disabled PCI device
bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()
bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()
bnxt_en: Validate vlan protocol ID on RX packets
bnxt_en: Check abort error state in bnxt_half_open_nic()
net: hisilicon: rename CACHE_LINE_MASK to avoid redefinition
net/tcp_fastopen: fix data races around tfo_active_disable_stamp
ALSA: hda: intel-dsp-cfg: add missing ElkhartLake PCI ID
net: hns3: fix possible mismatches resp of mailbox
net: hns3: fix rx VLAN offload state inconsistent issue
spi: spi-bcm2835: Fix deadlock
net/sched: act_skbmod: Skip non-Ethernet packets
ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
ceph: don't WARN if we're still opening a session to an MDS
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
afs: Fix tracepoint string placement with built-in AFS
r8169: Avoid duplicate sysfs entry creation error
nvme: set the PRACT bit when using Write Zeroes with T10 PI
sctp: update active_key for asoc when old key is being replaced
tcp: disable TFO blackhole logic by default
net: dsa: sja1105: make VID 4095 a bridge VLAN too
net: sched: cls_api: Fix the the wrong parameter
drm/panel: raspberrypi-touchscreen: Prevent double-free
cifs: only write 64kb at a time when fallocating a small region of a file
cifs: fix fallocate when trying to allocate a hole.
proc: Avoid mixing integer types in mem_rw()
mmc: core: Don't allocate IDA for OF aliases
s390/ftrace: fix ftrace_update_ftrace_func implementation
s390/boot: fix use of expolines in the DMA code
ALSA: usb-audio: Add missing proc text entry for BESPOKEN type
ALSA: usb-audio: Add registration quirk for JBL Quantum headsets
ALSA: sb: Fix potential ABBA deadlock in CSP driver
ALSA: hda/realtek: Fix pop noise and 2 Front Mic issues on a machine
ALSA: hdmi: Expose all pins on MSI MS-7C94 board
ALSA: pcm: Call substream ack() method upon compat mmap commit
ALSA: pcm: Fix mmap capability check
Revert "usb: renesas-xhci: Fix handling of unknown ROM state"
usb: xhci: avoid renesas_usb_fw.mem when it's unusable
xhci: Fix lost USB 2 remote wake
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
usb: hub: Fix link power management max exit latency (MEL) calculations
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
usb: max-3421: Prevent corruption of freed memory
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
USB: serial: option: add support for u-blox LARA-R6 family
USB: serial: cp210x: fix comments for GE CS1000
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe
usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.
usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
usb: typec: stusb160x: register role switch before interrupt registration
firmware/efi: Tell memblock about EFI iomem reservations
tracepoints: Update static_call before tp_funcs when adding a tracepoint
tracing/histogram: Rename "cpu" to "common_cpu"
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
tracing: Synthetic event field_pos is an index not a boolean
btrfs: check for missing device in btrfs_trim_fs
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
ixgbe: Fix packet corruption due to missing DMA sync
bus: mhi: core: Validate channel ID when processing command completions
posix-cpu-timers: Fix rearm racing against process tick
selftest: use mmap instead of posix_memalign to allocate memory
io_uring: explicitly count entries for poll reqs
io_uring: remove double poll entry on arm failure
userfaultfd: do not untag user pointers
memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
hugetlbfs: fix mount mode command line processing
rbd: don't hold lock_rwsem while running_list is being drained
rbd: always kick acquire on "acquired" and "released" notifications
misc: eeprom: at24: Always append device id even if label property is set.
nds32: fix up stack guard gap
driver core: Prevent warning when removing a device link from unregistered consumer
drm: Return -ENOTTY for non-drm ioctls
drm/amdgpu: update golden setting for sienna_cichlid
net: dsa: mv88e6xxx: enable SerDes RX stats for Topaz
net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz
PCI: Mark AMD Navi14 GPU ATS as broken
bonding: fix build issue
skbuff: Release nfct refcount on napi stolen or re-used skbs
Documentation: Fix intiramfs script name
perf inject: Close inject.output on exit
usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI
drm/i915/gvt: Clear d3_entered on elsp cmd submission.
sfc: ensure correct number of XDP queues
xhci: add xhci_get_virt_ep() helper
skbuff: Fix build with SKB extensions disabled
Linux 5.10.54
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ifd2823b47ab1544cd1f168b138624ffe060a471e
|
||
|
Steven Rostedt (VMware)
|
0edad8b9f6 |
tracepoints: Update static_call before tp_funcs when adding a tracepoint
commit 352384d5c84ebe40fa77098cc234fe173247d8ef upstream.
Because of the significant overhead that retpolines pose on indirect
calls, the tracepoint code was updated to use the new "static_calls" that
can modify the running code to directly call a function instead of using
an indirect caller, and this function can be changed at runtime.
In the tracepoint code that calls all the registered callbacks that are
attached to a tracepoint, the following is done:
it_func_ptr = rcu_dereference_raw((&__tracepoint_##name)->funcs);
if (it_func_ptr) {
__data = (it_func_ptr)->data;
static_call(tp_func_##name)(__data, args);
}
If there's just a single callback, the static_call is updated to just call
that callback directly. Once another handler is added, then the static
caller is updated to call the iterator, that simply loops over all the
funcs in the array and calls each of the callbacks like the old method
using indirect calling.
The issue was discovered with a race between updating the funcs array and
updating the static_call. The funcs array was updated first and then the
static_call was updated. This is not an issue as long as the first element
in the old array is the same as the first element in the new array. But
that assumption is incorrect, because callbacks also have a priority
field, and if there's a callback added that has a higher priority than the
callback on the old array, then it will become the first callback in the
new array. This means that it is possible to call the old callback with
the new callback data element, which can cause a kernel panic.
static_call = callback1()
funcs[] = {callback1,data1};
callback2 has higher priority than callback1
CPU 1 CPU 2
----- -----
new_funcs = {callback2,data2},
{callback1,data1}
rcu_assign_pointer(tp->funcs, new_funcs);
/*
* Now tp->funcs has the new array
* but the static_call still calls callback1
*/
it_func_ptr = tp->funcs [ new_funcs ]
data = it_func_ptr->data [ data2 ]
static_call(callback1, data);
/* Now callback1 is called with
* callback2's data */
[ KERNEL PANIC ]
update_static_call(iterator);
To prevent this from happening, always switch the static_call to the
iterator before assigning the tp->funcs to the new array. The iterator will
always properly match the callback with its data.
To trigger this bug:
In one terminal:
while :; do hackbench 50; done
In another terminal
echo 1 > /sys/kernel/tracing/events/sched/sched_waking/enable
while :; do
echo 1 > /sys/kernel/tracing/set_event_pid;
sleep 0.5
echo 0 > /sys/kernel/tracing/set_event_pid;
sleep 0.5
done
And it doesn't take long to crash. This is because the set_event_pid adds
a callback to the sched_waking tracepoint with a high priority, which will
be called before the sched_waking trace event callback is called.
Note, the removal to a single callback updates the array first, before
changing the static_call to single callback, which is the proper order as
the first element in the array is the same as what the static_call is
being changed to.
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Greg Kroah-Hartman
|
2df0fb4a4b |
Merge 5.10.50 into android12-5.10-lts
Changes in 5.10.50
Bluetooth: hci_qca: fix potential GPF
Bluetooth: btqca: Don't modify firmware contents in-place
Bluetooth: Remove spurious error message
ALSA: usb-audio: fix rate on Ozone Z90 USB headset
ALSA: usb-audio: Fix OOB access at proc output
ALSA: firewire-motu: fix stream format for MOTU 8pre FireWire
ALSA: usb-audio: scarlett2: Fix wrong resume call
ALSA: intel8x0: Fix breakage at ac97 clock measurement
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
ALSA: hda/realtek: Add another ALC236 variant support
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook x360 830 G8
ALSA: hda/realtek: Improve fixup for HP Spectre x360 15-df0xxx
ALSA: hda/realtek: Fix bass speaker DAC mapping for Asus UM431D
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
media: dvb-usb: fix wrong definition
Input: usbtouchscreen - fix control-request directions
net: can: ems_usb: fix use-after-free in ems_usb_disconnect()
usb: gadget: eem: fix echo command packet response issue
usb: renesas-xhci: Fix handling of unknown ROM state
USB: cdc-acm: blacklist Heimann USB Appset device
usb: dwc3: Fix debugfs creation flow
usb: typec: Add the missed altmode_id_remove() in typec_register_altmode()
xhci: solve a double free problem while doing s4
gfs2: Fix underflow in gfs2_page_mkwrite
gfs2: Fix error handling in init_statfs
ntfs: fix validity check for file name attribute
selftests/lkdtm: Avoid needing explicit sub-shell
copy_page_to_iter(): fix ITER_DISCARD case
iov_iter_fault_in_readable() should do nothing in xarray case
Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl
crypto: nx - Fix memcpy() over-reading in nonce
crypto: ccp - Annotate SEV Firmware file names
arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode
ARM: dts: ux500: Fix LED probing
ARM: dts: at91: sama5d4: fix pinctrl muxing
btrfs: send: fix invalid path for unlink operations after parent orphanization
btrfs: compression: don't try to compress if we don't have enough pages
btrfs: clear defrag status of a root if starting transaction fails
ext4: cleanup in-core orphan list if ext4_truncate() failed to get a transaction handle
ext4: fix kernel infoleak via ext4_extent_header
ext4: fix overflow in ext4_iomap_alloc()
ext4: return error code when ext4_fill_flex_info() fails
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
ext4: remove check for zero nr_to_scan in ext4_es_scan()
ext4: fix avefreec in find_group_orlov
ext4: use ext4_grp_locked_error in mb_find_extent
can: bcm: delay release of struct bcm_op after synchronize_rcu()
can: gw: synchronize rcu operations before removing gw job entry
can: isotp: isotp_release(): omit unintended hrtimer restart on socket release
can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after RCU is done
can: peak_pciefd: pucan_handle_status(): fix a potential starvation issue in TX path
mac80211: remove iwlwifi specific workaround that broke sta NDP tx
SUNRPC: Fix the batch tasks count wraparound.
SUNRPC: Should wake up the privileged task firstly.
bus: mhi: Wait for M2 state during system resume
mm/gup: fix try_grab_compound_head() race with split_huge_page()
perf/smmuv3: Don't trample existing events with global filter
KVM: nVMX: Handle split-lock #AC exceptions that happen in L2
KVM: PPC: Book3S HV: Workaround high stack usage with clang
KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs
KVM: x86/mmu: Use MMU's role to detect CR4.SMEP value in nested NPT walk
s390/cio: dont call css_wait_for_slow_path() inside a lock
s390: mm: Fix secure storage access exception handling
f2fs: Prevent swap file in LFS mode
clk: agilex/stratix10/n5x: fix how the bypass_reg is handled
clk: agilex/stratix10: remove noc_clk
clk: agilex/stratix10: fix bypass representation
rtc: stm32: Fix unbalanced clk_disable_unprepare() on probe error path
iio: frequency: adf4350: disable reg and clk on error in adf4350_probe()
iio: light: tcs3472: do not free unallocated IRQ
iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too
iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR
iio: ltr501: ltr501_read_ps(): add missing endianness conversion
iio: accel: bma180: Fix BMA25x bandwidth register values
serial: mvebu-uart: fix calculation of clock divisor
serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
serial_cs: Add Option International GSM-Ready 56K/ISDN modem
serial_cs: remove wrong GLOBETROTTER.cis entry
ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()
ssb: sdio: Don't overwrite const buffer if block_write fails
rsi: Assign beacon rate settings to the correct rate_info descriptor field
rsi: fix AP mode with WPA failure due to encrypted EAPOL
tracing/histograms: Fix parsing of "sym-offset" modifier
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
loop: Fix missing discard support when using LOOP_CONFIGURE
evm: Execute evm_inode_init_security() only when an HMAC key is loaded
evm: Refuse EVM_ALLOW_METADATA_WRITES only if an HMAC key is loaded
fuse: Fix crash in fuse_dentry_automount() error path
fuse: Fix crash if superblock of submount gets killed early
fuse: Fix infinite loop in sget_fc()
fuse: ignore PG_workingset after stealing
fuse: check connected before queueing on fpq->io
fuse: reject internal errno
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
spi: Make of_register_spi_device also set the fwnode
Add a reference to ucounts for each cred
staging: media: rkvdec: fix pm_runtime_get_sync() usage count
media: marvel-ccic: fix some issues when getting pm_runtime
media: mdk-mdp: fix pm_runtime_get_sync() usage count
media: s5p: fix pm_runtime_get_sync() usage count
media: am437x: fix pm_runtime_get_sync() usage count
media: sh_vou: fix pm_runtime_get_sync() usage count
media: mtk-vcodec: fix PM runtime get logic
media: s5p-jpeg: fix pm_runtime_get_sync() usage count
media: sunxi: fix pm_runtime_get_sync() usage count
media: sti/bdisp: fix pm_runtime_get_sync() usage count
media: exynos4-is: fix pm_runtime_get_sync() usage count
media: exynos-gsc: fix pm_runtime_get_sync() usage count
spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'
spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()
spi: omap-100k: Fix the length judgment problem
regulator: uniphier: Add missing MODULE_DEVICE_TABLE
sched/core: Initialize the idle task with preemption disabled
hwrng: exynos - Fix runtime PM imbalance on error
crypto: nx - add missing MODULE_DEVICE_TABLE
media: sti: fix obj-$(config) targets
media: cpia2: fix memory leak in cpia2_usb_probe
media: cobalt: fix race condition in setting HPD
media: hevc: Fix dependent slice segment flags
media: pvrusb2: fix warning in pvr2_i2c_core_done
media: imx: imx7_mipi_csis: Fix logging of only error event counters
crypto: qat - check return code of qat_hal_rd_rel_reg()
crypto: qat - remove unused macro in FW loader
crypto: qce: skcipher: Fix incorrect sg count for dma transfers
arm64: perf: Convert snprintf to sysfs_emit
sched/fair: Fix ascii art by relpacing tabs
media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off
media: bt878: do not schedule tasklet when it is not setup
media: em28xx: Fix possible memory leak of em28xx struct
media: hantro: Fix .buf_prepare
media: cedrus: Fix .buf_prepare
media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release
media: bt8xx: Fix a missing check bug in bt878_probe
media: st-hva: Fix potential NULL pointer dereferences
crypto: hisilicon/sec - fixup 3des minimum key size declaration
Makefile: fix GDB warning with CONFIG_RELR
media: dvd_usb: memory leak in cinergyt2_fe_attach
memstick: rtsx_usb_ms: fix UAF
mmc: sdhci-sprd: use sdhci_sprd_writew
mmc: via-sdmmc: add a check against NULL pointer dereference
spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.
spi: meson-spicc: fix memory leak in meson_spicc_probe
crypto: shash - avoid comparing pointers to exported functions under CFI
media: dvb_net: avoid speculation from net slot
media: siano: fix device register error path
media: imx-csi: Skip first few frames from a BT.656 source
hwmon: (max31790) Report correct current pwm duty cycles
hwmon: (max31790) Fix pwmX_enable attributes
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
KVM: PPC: Book3S HV: Fix TLB management on SMT8 POWER9 and POWER10 processors
btrfs: fix error handling in __btrfs_update_delayed_inode
btrfs: abort transaction if we fail to update the delayed inode
btrfs: sysfs: fix format string for some discard stats
btrfs: don't clear page extent mapped if we're not invalidating the full page
btrfs: disable build on platforms having page size 256K
locking/lockdep: Fix the dep path printing for backwards BFS
lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
KVM: s390: get rid of register asm usage
regulator: mt6358: Fix vdram2 .vsel_mask
regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
media: Fix Media Controller API config checks
ACPI: video: use native backlight for GA401/GA502/GA503
HID: do not use down_interruptible() when unbinding devices
EDAC/ti: Add missing MODULE_DEVICE_TABLE
ACPI: processor idle: Fix up C-state latency if not ordered
hv_utils: Fix passing zero to 'PTR_ERR' warning
lib: vsprintf: Fix handling of number field widths in vsscanf
Input: goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c
platform/x86: touchscreen_dmi: Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets
platform/x86: touchscreen_dmi: Add info for the Goodix GT912 panel of TM800A550L tablets
ACPI: EC: Make more Asus laptops use ECDT _GPE
block_dump: remove block_dump feature in mark_inode_dirty()
blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter
blk-mq: clear stale request in tags->rq[] before freeing one request pool
fs: dlm: cancel work sync othercon
random32: Fix implicit truncation warning in prandom_seed_state()
open: don't silently ignore unknown O-flags in openat2()
drivers: hv: Fix missing error code in vmbus_connect()
fs: dlm: fix memory leak when fenced
ACPICA: Fix memory leak caused by _CID repair function
ACPI: bus: Call kobject_put() in acpi_init() error path
ACPI: resources: Add checks for ACPI IRQ override
block: fix race between adding/removing rq qos and normal IO
platform/x86: asus-nb-wmi: Revert "Drop duplicate DMI quirk structures"
platform/x86: asus-nb-wmi: Revert "add support for ASUS ROG Zephyrus G14 and G15"
platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()
nvme-pci: fix var. type for increasing cq_head
nvmet-fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst()
EDAC/Intel: Do not load EDAC driver when running as a guest
PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
cifs: improve fallocate emulation
ACPI: EC: trust DSDT GPE for certain HP laptop
clocksource: Retry clock read if long delays detected
clocksource: Check per-CPU clock synchronization when marked unstable
tpm_tis_spi: add missing SPI device ID entries
ACPI: tables: Add custom DSDT file as makefile prerequisite
HID: wacom: Correct base usage for capacitive ExpressKey status bits
cifs: fix missing spinlock around update to ses->status
mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
block: fix discard request merge
kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
ia64: mca_drv: fix incorrect array size calculation
writeback, cgroup: increment isw_nr_in_flight before grabbing an inode
spi: Allow to have all native CSs in use along with GPIOs
spi: Avoid undefined behaviour when counting unused native CSs
media: venus: Rework error fail recover logic
media: s5p_cec: decrement usage count if disabled
media: hantro: do a PM resume earlier
crypto: ixp4xx - dma_unmap the correct address
crypto: ixp4xx - update IV after requests
crypto: ux500 - Fix error return code in hash_hw_final()
sata_highbank: fix deferred probing
pata_rb532_cf: fix deferred probing
media: I2C: change 'RST' to "RSET" to fix multiple build errors
sched/uclamp: Fix wrong implementation of cpu.uclamp.min
sched/uclamp: Fix locking around cpu_util_update_eff()
kbuild: Fix objtool dependency for 'OBJECT_FILES_NON_STANDARD_<obj> := n'
pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
evm: fix writing <securityfs>/evm overflow
x86/elf: Use _BITUL() macro in UAPI headers
crypto: sa2ul - Fix leaks on failure paths with sa_dma_init()
crypto: sa2ul - Fix pm_runtime enable in sa_ul_probe()
crypto: ccp - Fix a resource leak in an error handling path
media: rc: i2c: Fix an error message
pata_ep93xx: fix deferred probing
locking/lockdep: Reduce LOCKDEP dependency list
media: rkvdec: Fix .buf_prepare
media: exynos4-is: Fix a use after free in isp_video_release
media: au0828: fix a NULL vs IS_ERR() check
media: tc358743: Fix error return code in tc358743_probe_of()
media: gspca/gl860: fix zero-length control requests
m68k: atari: Fix ATARI_KBD_CORE kconfig unmet dependency warning
media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()
regulator: fan53880: Fix vsel_mask setting for FAN53880_BUCK
crypto: nitrox - fix unchecked variable in nitrox_register_interrupts
crypto: omap-sham - Fix PM reference leak in omap sham ops
crypto: x86/curve25519 - fix cpu feature checking logic in mod_exit
crypto: sm2 - remove unnecessary reset operations
crypto: sm2 - fix a memory leak in sm2
mmc: usdhi6rol0: fix error return code in usdhi6_probe()
arm64: consistently use reserved_pg_dir
arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan
media: subdev: remove VIDIOC_DQEVENT_TIME32 handling
media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctx
hwmon: (lm70) Use device_get_match_data()
hwmon: (lm70) Revert "hwmon: (lm70) Add support for ACPI"
hwmon: (max31722) Remove non-standard ACPI device IDs
hwmon: (max31790) Fix fan speed reporting for fan7..12
KVM: nVMX: Sync all PGDs on nested transition with shadow paging
KVM: nVMX: Ensure 64-bit shift when checking VMFUNC bitmap
KVM: nVMX: Don't clobber nested MMU's A/D status on EPTP switch
KVM: x86/mmu: Fix return value in tdp_mmu_map_handle_target_level()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
KVM: arm64: Don't zero the cycle count register when PMCR_EL0.P is set
regulator: hi655x: Fix pass wrong pointer to config.driver_data
btrfs: clear log tree recovering status if starting transaction fails
x86/sev: Make sure IRQs are disabled while GHCB is active
x86/sev: Split up runtime #VC handler for correct state tracking
sched/rt: Fix RT utilization tracking during policy change
sched/rt: Fix Deadline utilization tracking during policy change
sched/uclamp: Fix uclamp_tg_restrict()
lockdep: Fix wait-type for empty stack
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
spi: spi-sun6i: Fix chipselect/clock bug
crypto: nx - Fix RCU warning in nx842_OF_upd_status
psi: Fix race between psi_trigger_create/destroy
media: v4l2-async: Clean v4l2_async_notifier_add_fwnode_remote_subdev
media: video-mux: Skip dangling endpoints
PM / devfreq: Add missing error code in devfreq_add_device()
ACPI: PM / fan: Put fan device IDs into separate header file
block: avoid double io accounting for flush request
nvme-pci: look for StorageD3Enable on companion ACPI device instead
ACPI: sysfs: Fix a buffer overrun problem with description_show()
mark pstore-blk as broken
clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
extcon: extcon-max8997: Fix IRQ freeing at error path
ACPI: APEI: fix synchronous external aborts in user-mode
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
blk-wbt: make sure throttle is enabled properly
ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros
ACPI: bgrt: Fix CFI violation
cpufreq: Make cpufreq_online() call driver->offline() on errors
blk-mq: update hctx->dispatch_busy in case of real scheduler
ocfs2: fix snprintf() checking
dax: fix ENOMEM handling in grab_mapping_entry()
mm/debug_vm_pgtable/basic: add validation for dirtiness after write protect
mm/debug_vm_pgtable/basic: iterate over entire protection_map[]
mm/debug_vm_pgtable: ensure THP availability via has_transparent_hugepage()
swap: fix do_swap_page() race with swapoff
mm/shmem: fix shmem_swapin() race with swapoff
mm: memcg/slab: properly set up gfp flags for objcg pointer array
mm: page_alloc: refactor setup_per_zone_lowmem_reserve()
mm/page_alloc: fix counting of managed_pages
xfrm: xfrm_state_mtu should return at least 1280 for ipv6
drm/bridge/sii8620: fix dependency on extcon
drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()
drm/amd/dc: Fix a missing check bug in dm_dp_mst_detect()
drm/ast: Fix missing conversions to managed API
video: fbdev: imxfb: Fix an error message
net: mvpp2: Put fwnode in error case during ->probe()
net: pch_gbe: Propagate error from devm_gpio_request_one()
pinctrl: renesas: r8a7796: Add missing bias for PRESET# pin
pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilities
drm/vmwgfx: Mark a surface gpu-dirty after the SVGA3dCmdDXGenMips command
drm/vmwgfx: Fix cpu updates of coherent multisample surfaces
net: qrtr: ns: Fix error return code in qrtr_ns_init()
clk: meson: g12a: fix gp0 and hifi ranges
net: ftgmac100: add missing error return code in ftgmac100_probe()
drm: rockchip: set alpha_en to 0 if it is not used
drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()
drm/rockchip: dsi: move all lane config except LCDC mux to bind()
drm/rockchip: lvds: Fix an error handling path
drm/rockchip: cdn-dp: fix sign extension on an int multiply for a u64 result
mptcp: fix pr_debug in mptcp_token_new_connect
mptcp: generate subflow hmac after mptcp_finish_join()
RDMA/srp: Fix a recently introduced memory leak
RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its stats
RDMA/rtrs: Do not reset hb_missed_max after re-connection
RDMA/rtrs-srv: Fix memory leak of unfreed rtrs_srv_stats object
RDMA/rtrs-srv: Fix memory leak when having multiple sessions
RDMA/rtrs-clt: Check if the queue_depth has changed during a reconnection
RDMA/rtrs-clt: Fix memory leak of not-freed sess->stats and stats->pcpu_stats
ehea: fix error return code in ehea_restart_qps()
clk: tegra30: Use 300MHz for video decoder by default
xfrm: remove the fragment check for ipv6 beet mode
net/sched: act_vlan: Fix modify to allow 0
RDMA/core: Sanitize WQ state received from the userspace
drm/pl111: depend on CONFIG_VEXPRESS_CONFIG
RDMA/rxe: Fix failure during driver load
drm/pl111: Actually fix CONFIG_VEXPRESS_CONFIG depends
drm/vc4: hdmi: Fix error path of hpd-gpios
clk: vc5: fix output disabling when enabling a FOD
drm: qxl: ensure surf.data is ininitialized
tools/bpftool: Fix error return code in do_batch()
ath10k: go to path err_unsupported when chip id is not supported
ath10k: add missing error return code in ath10k_pci_probe()
wireless: carl9170: fix LEDS build errors & warnings
ieee802154: hwsim: Fix possible memory leak in hwsim_subscribe_all_others
clk: imx8mq: remove SYS PLL 1/2 clock gates
wcn36xx: Move hal_buf allocation to devm_kmalloc in probe
ssb: Fix error return code in ssb_bus_scan()
brcmfmac: fix setting of station info chains bitmask
brcmfmac: correctly report average RSSI in station info
brcmfmac: Fix a double-free in brcmf_sdio_bus_reset
brcmsmac: mac80211_if: Fix a resource leak in an error handling path
cw1200: Revert unnecessary patches that fix unreal use-after-free bugs
ath11k: Fix an error handling path in ath11k_core_fetch_board_data_api_n()
ath10k: Fix an error code in ath10k_add_interface()
ath11k: send beacon template after vdev_start/restart during csa
netlabel: Fix memory leak in netlbl_mgmt_add_common
RDMA/mlx5: Don't add slave port to unaffiliated list
netfilter: nft_exthdr: check for IPv6 packet before further processing
netfilter: nft_osf: check for TCP packet before further processing
netfilter: nft_tproxy: restrict support to TCP and UDP transport protocols
RDMA/rxe: Fix qp reference counting for atomic ops
selftests/bpf: Whitelist test_progs.h from .gitignore
xsk: Fix missing validation for skb and unaligned mode
xsk: Fix broken Tx ring validation
bpf: Fix libelf endian handling in resolv_btfids
RDMA/rtrs-srv: Set minimal max_send_wr and max_recv_wr
samples/bpf: Fix Segmentation fault for xdp_redirect command
samples/bpf: Fix the error return code of xdp_redirect's main()
mt76: fix possible NULL pointer dereference in mt76_tx
mt76: mt7615: fix NULL pointer dereference in tx_prepare_skb()
net: ethernet: aeroflex: fix UAF in greth_of_remove
net: ethernet: ezchip: fix UAF in nps_enet_remove
net: ethernet: ezchip: fix error handling
vrf: do not push non-ND strict packets with a source LLA through packet taps again
net: sched: add barrier to ensure correct ordering for lockless qdisc
tls: prevent oversized sendfile() hangs by ignoring MSG_MORE
netfilter: nf_tables_offload: check FLOW_DISSECTOR_KEY_BASIC in VLAN transfer logic
pkt_sched: sch_qfq: fix qfq_change_class() error path
xfrm: Fix xfrm offload fallback fail case
iwlwifi: increase PNVM load timeout
rtw88: 8822c: fix lc calibration timing
vxlan: add missing rcu_read_lock() in neigh_reduce()
ip6_tunnel: fix GRE6 segmentation
net/ipv4: swap flow ports when validating source
net: ti: am65-cpsw-nuss: Fix crash when changing number of TX queues
tc-testing: fix list handling
ieee802154: hwsim: Fix memory leak in hwsim_add_one
ieee802154: hwsim: avoid possible crash in hwsim_del_edge_nl()
bpf: Fix null ptr deref with mixed tail calls and subprogs
drm/msm: Fix error return code in msm_drm_init()
drm/msm/dpu: Fix error return code in dpu_mdss_init()
mac80211: remove iwlwifi specific workaround NDPs of null_response
net: bcmgenet: Fix attaching to PYH failed on RPi 4B
ipv6: exthdrs: do not blindly use init_net
can: j1939: j1939_sk_setsockopt(): prevent allocation of j1939 filter for optlen == 0
bpf: Do not change gso_size during bpf_skb_change_proto()
i40e: Fix error handling in i40e_vsi_open
i40e: Fix autoneg disabling for non-10GBaseT links
i40e: Fix missing rtnl locking when setting up pf switch
Revert "ibmvnic: remove duplicate napi_schedule call in open function"
ibmvnic: set ltb->buff to NULL after freeing
ibmvnic: free tx_pool if tso_pool alloc fails
RDMA/cma: Protect RMW with qp_mutex
net: macsec: fix the length used to copy the key for offloading
net: phy: mscc: fix macsec key length
net: atlantic: fix the macsec key length
ipv6: fix out-of-bound access in ip6_parse_tlv()
e1000e: Check the PCIm state
net: dsa: sja1105: fix NULL pointer dereference in sja1105_reload_cbs()
bpfilter: Specify the log level for the kmsg message
RDMA/cma: Fix incorrect Packet Lifetime calculation
gve: Fix swapped vars when fetching max queues
Revert "be2net: disable bh with spin_lock in be_process_mcc"
Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid
Bluetooth: Fix not sending Set Extended Scan Response
Bluetooth: Fix Set Extended (Scan Response) Data
Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated event
clk: actions: Fix UART clock dividers on Owl S500 SoC
clk: actions: Fix SD clocks factor table on Owl S500 SoC
clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC
clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare
clk: si5341: Wait for DEVICE_READY on startup
clk: si5341: Avoid divide errors due to bogus register contents
clk: si5341: Check for input clock presence and PLL lock on startup
clk: si5341: Update initialization magic
writeback: fix obtain a reference to a freeing memcg css
net: lwtunnel: handle MTU calculation in forwading
net: sched: fix warning in tcindex_alloc_perfect_hash
net: tipc: fix FB_MTU eat two pages
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/core: Always release restrack object
MIPS: Fix PKMAP with 32-bit MIPS huge page support
staging: fbtft: Rectify GPIO handling
staging: fbtft: Don't spam logs when probe is deferred
ASoC: rt5682: Disable irq on shutdown
rcu: Invoke rcu_spawn_core_kthreads() from rcu_spawn_gp_kthread()
serial: fsl_lpuart: don't modify arbitrary data on lpuart32
serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()
serial: 8250_omap: fix a timeout loop condition
tty: nozomi: Fix a resource leak in an error handling function
mwifiex: re-fix for unaligned accesses
iio: adis_buffer: do not return ints in irq handlers
iio: adis16400: do not return ints in irq handlers
iio: adis16475: do not return ints in irq handlers
iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: bma220: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: hid: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: kxcjk-1013: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: mxc4005: Fix overread of data and alignment issue.
iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads1015: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: vf610: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: gyro: bmg160: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: humidity: am2315: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: pulsed-light: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: as3935: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: hmc5843: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: bmc150: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: isl29125: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3414: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3472: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: chemical: atlas: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: cros_ec_sensors: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: potentiostat: lmp91000: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
ASoC: rk3328: fix missing clk_disable_unprepare() on error in rk3328_platform_probe()
ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()
backlight: lm3630a_bl: Put fwnode in error case during ->probe()
ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
Input: hil_kbd - fix error return code in hil_dev_connect()
perf scripting python: Fix tuple_set_u64()
mtd: partitions: redboot: seek fis-index-block in the right node
mtd: rawnand: arasan: Ensure proper configuration for the asserted target
staging: mmal-vchiq: Fix incorrect static vchiq_instance.
char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()
firmware: stratix10-svc: Fix a resource leak in an error handling path
tty: nozomi: Fix the error handling path of 'nozomi_card_init()'
leds: class: The -ENOTSUPP should never be seen by user space
leds: lm3532: select regmap I2C API
leds: lm36274: Put fwnode in error case during ->probe()
leds: lm3692x: Put fwnode in any case during ->probe()
leds: lm3697: Don't spam logs when probe is deferred
leds: lp50xx: Put fwnode in error case during ->probe()
scsi: FlashPoint: Rename si_flags field
scsi: iscsi: Flush block work before unblock
mfd: mp2629: Select MFD_CORE to fix build error
mfd: rn5t618: Fix IRQ trigger by changing it to level mode
fsi: core: Fix return of error values on failures
fsi: scom: Reset the FSI2PIB engine for any error
fsi: occ: Don't accept response from un-initialized OCC
fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE
fsi/sbefifo: Fix reset timeout
visorbus: fix error return code in visorchipset_init()
iommu/amd: Fix extended features logging
s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK
s390: enable HAVE_IOREMAP_PROT
s390: appldata depends on PROC_SYSCTL
selftests: splice: Adjust for handler fallback removal
iommu/dma: Fix IOVA reserve dma ranges
ASoC: max98373-sdw: use first_hw_init flag on resume
ASoC: rt1308-sdw: use first_hw_init flag on resume
ASoC: rt5682-sdw: use first_hw_init flag on resume
ASoC: rt700-sdw: use first_hw_init flag on resume
ASoC: rt711-sdw: use first_hw_init flag on resume
ASoC: rt715-sdw: use first_hw_init flag on resume
ASoC: rt5682: fix getting the wrong device id when the suspend_stress_test
ASoC: rt5682-sdw: set regcache_cache_only false before reading RT5682_DEVICE_ID
ASoC: mediatek: mtk-btcvsd: Fix an error handling path in 'mtk_btcvsd_snd_probe()'
usb: gadget: f_fs: Fix setting of device and driver data cross-references
usb: dwc2: Don't reset the core after setting turnaround time
eeprom: idt_89hpesx: Put fwnode in matching case during ->probe()
eeprom: idt_89hpesx: Restore printing the unsupported fwnode name
thunderbolt: Bond lanes only when dual_link_port != NULL in alloc_dev_default()
iio: adc: at91-sama5d2: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: hx711: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: mxs-lradc: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: magn: rm3100: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: light: vcnl4000: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
ASoC: fsl_spdif: Fix error handler with pm_runtime_enable
staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()
staging: gdm724x: check for overflow in gdm_lte_netif_rx()
staging: rtl8712: fix error handling in r871xu_drv_init
staging: rtl8712: fix memory leak in rtl871x_load_fw_cb
coresight: core: Fix use of uninitialized pointer
staging: mt7621-dts: fix pci address for PCI memory range
serial: 8250: Actually allow UPF_MAGIC_MULTIPLIER baud rates
iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: isl29501: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
ASoC: cs42l42: Correct definition of CS42L42_ADC_PDN_MASK
of: Fix truncation of memory sizes on 32-bit platforms
mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume()
habanalabs: Fix an error handling path in 'hl_pci_probe()'
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
soundwire: stream: Fix test for DP prepare complete
phy: uniphier-pcie: Fix updating phy parameters
phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()
extcon: sm5502: Drop invalid register write in sm5502_reg_data
extcon: max8997: Add missing modalias string
powerpc/powernv: Fix machine check reporting of async store errors
ASoC: atmel-i2s: Fix usage of capture and playback at the same time
configfs: fix memleak in configfs_release_bin_file
ASoC: Intel: sof_sdw: add SOF_RT715_DAI_ID_FIX for AlderLake
ASoC: fsl_spdif: Fix unexpected interrupt after suspend
leds: as3645a: Fix error return code in as3645a_parse_node()
leds: ktd2692: Fix an error handling path
selftests/ftrace: fix event-no-pid on 1-core machine
serial: 8250: 8250_omap: Disable RX interrupt after DMA enable
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
powerpc: Offline CPU in stop_this_cpu()
powerpc/papr_scm: Properly handle UUID types and API
powerpc/64s: Fix copy-paste data exposure into newly created tasks
powerpc/papr_scm: Make 'perf_stats' invisible if perf-stats unavailable
ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: correctly calculate minimal possible baudrate
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
vfio/pci: Handle concurrent vma faults
mm/pmem: avoid inserting hugepage PTE entry with fsdax if hugepage support is disabled
mm/huge_memory.c: remove dedicated macro HPAGE_CACHE_INDEX_MASK
mm/huge_memory.c: add missing read-only THP checking in transparent_hugepage_enabled()
mm/huge_memory.c: don't discard hugepage if other processes are mapping it
mm/hugetlb: use helper huge_page_order and pages_per_huge_page
mm/hugetlb: remove redundant check in preparing and destroying gigantic page
hugetlb: remove prep_compound_huge_page cleanup
include/linux/huge_mm.h: remove extern keyword
mm/z3fold: fix potential memory leak in z3fold_destroy_pool()
mm/z3fold: use release_z3fold_page_locked() to release locked z3fold page
lib/math/rational.c: fix divide by zero
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: refill shadow register after implicit kernel write
perf llvm: Return -ENOMEM when asprintf() fails
csky: fix syscache.c fallthrough warning
csky: syscache: Fixup duplicate cache flush
exfat: handle wrong stream entry size in exfat_readdir()
scsi: fc: Correct RHBA attributes length
scsi: target: cxgbit: Unmap DMA buffer before calling target_execute_cmd()
mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
fscrypt: don't ignore minor_hash when hash is 0
fscrypt: fix derivation of SipHash keys on big endian CPUs
tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
erofs: fix error return code in erofs_read_superblock()
block: return the correct bvec when checking for gaps
io_uring: fix blocking inline submission
mmc: block: Disable CMDQ on the ioctl path
mmc: vub3000: fix control-request direction
media: exynos4-is: remove a now unused integer
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
crypto: qce - fix error return code in qce_skcipher_async_req_handle()
s390: preempt: Fix preempt_count initialization
cred: add missing return error code when set_cred_ucounts() failed
iommu/dma: Fix compile warning in 32-bit builds
powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
Linux 5.10.50
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iec4eab24ea8eb5a6d79739a1aec8432d93a8f82c
|
||
|
Steven Rostedt (VMware)
|
0531e84bc8 |
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
commit 9913d5745bd720c4266805c8d29952a3702e4eca upstream.
All internal use cases for tracepoint_probe_register() is set to not ever
be called with the same function and data. If it is, it is considered a
bug, as that means the accounting of handling tracepoints is corrupted.
If the function and data for a tracepoint is already registered when
tracepoint_probe_register() is called, it will call WARN_ON_ONCE() and
return with EEXISTS.
The BPF system call can end up calling tracepoint_probe_register() with
the same data, which now means that this can trigger the warning because
of a user space process. As WARN_ON_ONCE() should not be called because
user space called a system call with bad data, there needs to be a way to
register a tracepoint without triggering a warning.
Enter tracepoint_probe_register_may_exist(), which can be called, but will
not cause a WARN_ON() if the probe already exists. It will still error out
with EEXIST, which will then be sent to the user space that performed the
BPF system call.
This keeps the previous testing for issues with other users of the
tracepoint code, while letting BPF call it with duplicated data and not
warn about it.
Link: https://lore.kernel.org/lkml/20210626135845.4080-1-penguin-kernel@I-love.SAKURA.ne.jp/
Link: https://syzkaller.appspot.com/bug?id=41f4318cf01762389f4d1c1c459da4f542fe5153
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Quentin Perret
|
cc6eed90a4 |
ANDROID: vendor_hooks: Allow multiple attachments to restricted hooks
Allow up to two attachments to restricted vendor hooks to enable OEM and vendor coexistence. Priorities are not exposed to callers on purpose. Life's too short to re-order the callback array with concurrent readers. Bug: 183720636 Signed-off-by: Quentin Perret <qperret@google.com> Change-Id: I5c7aca7f69e581b4197388478d47e0da6d2893e6 |
||
|
Steven Rostedt (VMware)
|
8a40ca0c8b |
tracepoint: Do not fail unregistering a probe due to memory failure
[ Upstream commit befe6d946551d65cddbd32b9cb0170b0249fd5ed ]
The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.
This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.
There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.
Link: https://lore.kernel.org/r/20201115055256.65625-1-mmullins@mmlx.us
Link: https://lore.kernel.org/r/20201116175107.02db396d@gandalf.local.home
Link: https://lore.kernel.org/r/20201117211836.54acaef2@oasis.local.home
Link: https://lkml.kernel.org/r/20201118093405.7a6d2290@gandalf.local.home
[ Note, this version does use undefined compiler behavior (assuming that
a stub function with no parameters or return, can be called by a location
that thinks it has parameters but still no return value. Static calls
do the same thing, so this trick is not without precedent.
There's another solution that uses RCU tricks and is more complex, but
can be an alternative if this solution becomes an issue.
Link: https://lore.kernel.org/lkml/20210127170721.58bce7cc@gandalf.local.home/
]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: netdev <netdev@vger.kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Fixes:
|
||
|
Gustavo A. R. Silva
|
9d0a49c702 |
tracepoint: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> |
||
|
Steven Rostedt (VMware)
|
547305a646 |
tracepoint: Fix out of sync data passing by static caller
Naresh reported a bug that appears to be a side effect of the static
calls. It happens when going from more than one tracepoint callback to
a single one, and removing the first callback on the list. The list of
tracepoint callbacks holds data and a function to call with the
parameters of that tracepoint and a handler to the associated data.
old_list:
0: func = foo; data = NULL;
1: func = bar; data = &bar_struct;
new_list:
0: func = bar; data = &bar_struct;
CPU 0 CPU 1
----- -----
tp_funcs = old_list;
tp_static_caller = tp_interator
__DO_TRACE()
data = tp_funcs[0].data = NULL;
tp_funcs = new_list;
tracepoint_update_call()
tp_static_caller = tp_funcs[0] = bar;
tp_static_caller(data)
bar(data)
x = data->item = NULL->item
BOOM!
To solve this, add a tracepoint_synchronize_unregister() between
changing tp_funcs and updating the static tracepoint, that does both a
synchronize_rcu() and synchronize_srcu(). This will ensure that when
the static call is updated to the single callback that it will be
receiving the data that it registered with.
Fixes:
|
||
|
Steven Rostedt (VMware)
|
d25e37d89d |
tracepoint: Optimize using static_call()
Currently the tracepoint site will iterate a vector and issue indirect calls to however many handlers are registered (ie. the vector is long). Using static_call() it is possible to optimize this for the common case of only having a single handler registered. In this case the static_call() can directly call this handler. Otherwise, if the vector is longer than 1, call a function that iterates the whole vector like the current code. [peterz: updated to new interface] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20200818135805.279421092@infradead.org |
||
|
Peter Zijlstra
|
0340a6b7fb |
module: Fix up module_notifier return values
While auditing all module notifiers I noticed a whole bunch of fail wrt the return value. Notifiers have a 'special' return semantics. As is; NOTIFY_DONE vs NOTIFY_OK is a bit vague; but notifier_from_errno(0) results in NOTIFY_OK and NOTIFY_DONE has a comment that says "Don't care". From this I've used NOTIFY_DONE when the function completely ignores the callback and notifier_to_error() isn't used. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Robert Richter <rric@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20200818135804.385360407@infradead.org |
||
|
Linus Torvalds
|
818e95c768 |
Merge tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt: "The main changes in this release include: - Add user space specific memory reading for kprobes - Allow kprobes to be executed earlier in boot The rest are mostly just various clean ups and small fixes" * tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) tracing: Make trace_get_fields() global tracing: Let filter_assign_type() detect FILTER_PTR_STRING tracing: Pass type into tracing_generic_entry_update() ftrace/selftest: Test if set_event/ftrace_pid exists before writing ftrace/selftests: Return the skip code when tracing directory not configured in kernel tracing/kprobe: Check registered state using kprobe tracing/probe: Add trace_event_call accesses APIs tracing/probe: Add probe event name and group name accesses APIs tracing/probe: Add trace flag access APIs for trace_probe tracing/probe: Add trace_event_file access APIs for trace_probe tracing/probe: Add trace_event_call register API for trace_probe tracing/probe: Add trace_probe init and free functions tracing/uprobe: Set print format when parsing command tracing/kprobe: Set print format right after parsed command kprobes: Fix to init kprobes in subsys_initcall tracepoint: Use struct_size() in kmalloc() ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS ftrace: Enable trampoline when rec count returns back to one tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline tracing: Make a separate config for trace event self tests ... |
||
|
Gustavo A. R. Silva
|
f0553dcb97 |
tracepoint: Use struct_size() in kmalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct tp_probes {
...
struct tracepoint_func probes[0];
};
instance = kmalloc(sizeof(sizeof(struct tp_probes) +
sizeof(struct tracepoint_func) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, probes, count) GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
||
|
Thomas Gleixner
|
1a59d1b8e0 |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Paul E. McKenney
|
7440172974 |
tracing: Replace synchronize_sched() and call_rcu_sched()
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). Similarly, call_rcu_sched() can be replaced by call_rcu(). This commit therefore makes these changes. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: <linux-kernel@vger.kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
9c0be3f6b5 |
tracepoint: Fix tracepoint array element size mismatch
commit
|
||
|
Ard Biesheuvel
|
46e0c9be20 |
kernel: tracepoints: add support for relative references
To avoid the need for relocating absolute references to tracepoint structures at boot time when running relocatable kernels (which may take a disproportionate amount of space), add the option to emit these tables as relative references instead. Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Steven Rostedt (VMware)
|
f8a79d5c7e |
tracepoints: Free early tracepoints after RCU is initialized
When enabling trace events via the kernel command line, I hit this warning:
WARNING: CPU: 0 PID: 13 at kernel/rcu/srcutree.c:236 check_init_srcu_struct+0xe/0x61
Modules linked in:
CPU: 0 PID: 13 Comm: watchdog/0 Not tainted 4.18.0-rc6-test+ #6
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
RIP: 0010:check_init_srcu_struct+0xe/0x61
Code: 48 c7 c6 ec 8a 65 b4 e8 ff 79 fe ff 48 89 df 31 f6 e8 f2 fa ff ff 5a
5b 41 5c 5d c3 0f 1f 44 00 00 83 3d 68 94 b8 01 01 75 02 <0f> 0b 48 8b 87 f0
0a 00 00 a8 03 74 45 55 48 89 e5 41 55 41 54 4c
RSP: 0000:ffff96eb9ea03e68 EFLAGS: 00010246
RAX: ffff96eb962b5b01 RBX: ffffffffb4a87420 RCX: 0000000000000001
RDX: ffffffffb3107969 RSI: ffff96eb962b5b40 RDI: ffffffffb4a87420
RBP: ffff96eb9ea03eb0 R08: ffffabbd00cd7f48 R09: 0000000000000000
R10: ffff96eb9ea03e68 R11: ffffffffb4a6eec0 R12: ffff96eb962b5b40
R13: ffff96eb9ea03ef8 R14: ffffffffb3107969 R15: ffffffffb3107948
FS: 0000000000000000(0000) GS:ffff96eb9ea00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff96eb13ab2000 CR3: 0000000192a1e001 CR4: 00000000001606f0
Call Trace:
<IRQ>
? __call_srcu+0x2d/0x290
? rcu_process_callbacks+0x26e/0x448
? allocate_probes+0x2b/0x2b
call_srcu+0x13/0x15
rcu_free_old_probes+0x1f/0x21
rcu_process_callbacks+0x2ed/0x448
__do_softirq+0x172/0x336
irq_exit+0x62/0xb2
smp_apic_timer_interrupt+0x161/0x19e
apic_timer_interrupt+0xf/0x20
</IRQ>
The problem is that the enabling of trace events before RCU is set up will
cause SRCU to give this warning. To avoid this, add a list to store probes
that need to be freed till after RCU is initialized, and then free them
then.
Link: http://lkml.kernel.org/r/20180810113554.1df28050@gandalf.local.home
Link: http://lkml.kernel.org/r/20180810123517.5e9714ad@gandalf.local.home
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes:
|
||
|
Joel Fernandes (Google)
|
e6753f23d9 |
tracepoint: Make rcuidle tracepoint callers use SRCU
In recent tests with IRQ on/off tracepoints, a large performance overhead ~10% is noticed when running hackbench. This is root caused to calls to rcu_irq_enter_irqson and rcu_irq_exit_irqson from the tracepoint code. Following a long discussion on the list [1] about this, we concluded that srcu is a better alternative for use during rcu idle. Although it does involve extra barriers, its lighter than the sched-rcu version which has to do additional RCU calls to notify RCU idle about entry into RCU sections. In this patch, we change the underlying implementation of the trace_*_rcuidle API to use SRCU. This has shown to improve performance alot for the high frequency irq enable/disable tracepoints. Test: Tested idle and preempt/irq tracepoints. Here are some performance numbers: With a run of the following 30 times on a single core x86 Qemu instance with 1GB memory: hackbench -g 4 -f 2 -l 3000 Completion times in seconds. CONFIG_PROVE_LOCKING=y. No patches (without this series) Mean: 3.048 Median: 3.025 Std Dev: 0.064 With Lockdep using irq tracepoints with RCU implementation: Mean: 3.451 (-11.66 %) Median: 3.447 (-12.22%) Std Dev: 0.049 With Lockdep using irq tracepoints with SRCU implementation (this series): Mean: 3.020 (I would consider the improvement against the "without this series" case as just noise). Median: 3.013 Std Dev: 0.033 [1] https://patchwork.kernel.org/patch/10344297/ [remove rcu_read_lock_sched_notrace as its the equivalent of preempt_disable_notrace and is unnecessary to call in tracepoint code] Link: http://lkml.kernel.org/r/20180730222423.196630-3-joel@joelfernandes.org Cleaned-up-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> [ Simplified WARN_ON_ONCE() ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Lee, Chun-Yi
|
f39e239102 |
tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
The description of tracepoint_probe_register duplicates with tracepoint_probe_register_prio. This patch cleans up the descriptions. Link: http://lkml.kernel.org/r/20170616082643.7311-1-jlee@suse.com Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
d66a270be3 |
tracepoint: Do not warn on ENOMEM
Tracepoint should only warn when a kernel API user does not respect the
required preconditions (e.g. same tracepoint enabled twice, or called
to remove a tracepoint that does not exist).
Silence warning in out-of-memory conditions, given that the error is
returned to the caller.
This ensures that out-of-memory error-injection testing does not trigger
warnings in tracepoint.c, which were seen by syzbot.
Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com
Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com
Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com
CC: Peter Zijlstra <peterz@infradead.org>
CC: Jiri Olsa <jolsa@redhat.com>
CC: Arnaldo Carvalho de Melo <acme@kernel.org>
CC: Alexander Shishkin <alexander.shishkin@linux.intel.com>
CC: Namhyung Kim <namhyung@kernel.org>
CC: stable@vger.kernel.org
Fixes:
|
||
|
Paul E. McKenney
|
243d1a7977 |
tracepoint: Remove smp_read_barrier_depends() from comment
The comment in tracepoint_add_func() mentions smp_read_barrier_depends(), whose use should be quite restricted. This commit updates the comment to instead mention the smp_store_release() and rcu_dereference_sched() that the current code actually uses. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
||
|
Ingo Molnar
|
299300258d |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
3f07c01441 |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Steven Rostedt (Red Hat)
|
8cf868affd |
tracing: Have the reg function allow to fail
Some tracepoints have a registration function that gets enabled when the tracepoint is enabled. There may be cases that the registraction function must fail (for example, can't allocate enough memory). In this case, the tracepoint should also fail to register, otherwise the user would not know why the tracepoint is not working. Cc: David Howells <dhowells@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Anton Blanchard <anton@samba.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Joe Perches
|
a395d6a7e3 |
kernel/...: convert pr_warning to pr_warn
Use the more common logging method with the eventual goal of removing pr_warning altogether. Miscellanea: - Realign arguments - Coalesce formats - Add missing space between a few coalesced formats Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Steven Rostedt (Red Hat)
|
7904b5c498 |
tracepoint: Give priority to probes of tracepoints
In order to guarantee that a probe will be called before other probes that are attached to a tracepoint, there needs to be a mechanism to provide priority of one probe over the others. Adding a prio field to the struct tracepoint_func, which lets the probes be sorted by the priority set in the structure. If no priority is specified, then a priority of 10 is given (this is a macro, and perhaps may be changed in the future). Now probes may be added to affect other probes that are attached to a tracepoint with a guaranteed order. One use case would be to allow tracing of tracepoints be able to filter by pid. A special (higher priority probe) may be added to the sched_switch tracepoint and set the necessary flags of the other tracepoints to notify them if they should be traced or not. In case a tracepoint is enabled at the sched_switch tracepoint too, the order of the two are not random. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Oleg Nesterov
|
ea73c79e33 |
tracing: syscall_regfunc() should not skip kernel threads
syscall_regfunc() ignores the kernel threads because "it has no effect", see |
||
|
Oleg Nesterov
|
8063e41d2f |
tracing: Change syscall_*regfunc() to check PF_KTHREAD and use for_each_process_thread()
1. Remove _irqsafe from syscall_regfunc/syscall_unregfunc, read_lock(tasklist) doesn't need to disable irqs. 2. Change this code to avoid the deprecated do_each_thread() and use for_each_process_thread() (stolen from the patch from Frederic). 3. Change syscall_regfunc() to check PF_KTHREAD to skip the kernel threads, ->mm != NULL is the common mistake. Note: probably this check should be simply removed, needs another patch. [fweisbec@gmail.com: s/do_each_thread/for_each_process_thread/] Link: http://lkml.kernel.org/p/20140413185918.GC20668@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Fabian Frederick
|
cac92ba74f |
kernel/tracepoint.c: kernel-doc fixes
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mathieu Desnoyers
|
8058bd0faa |
tracepoint: Fix use of tracepoint funcs after rcu free
Commit |
||
|
Linus Torvalds
|
0a7418f5f5 |
Merge tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt: "This includes the final patch to clean up and fix the issue with the design of tracepoints and how a user could register a tracepoint and have that tracepoint not be activated but no error was shown. The design was for an out of tree module but broke in tree users. The clean up was to remove the saving of the hash table of tracepoint names such that they can be enabled before they exist (enabling a module tracepoint before that module is loaded). This added more complexity than needed. The clean up was to remove that code and just enable tracepoints that exist or fail if they do not. This removed a lot of code as well as the complexity that it brought. As a side effect, instead of registering a tracepoint by its name, the tracepoint needs to be registered with the tracepoint descriptor. This removes having to duplicate the tracepoint names that are enabled. The second patch was added that simplified the way modules were searched for. This cleanup required changes that were in the 3.15 queue as well as some changes that were added late in the 3.14-rc cycle. This final change waited till the two were merged in upstream and then the change was added and full tests were run. Unfortunately, the test found some errors, but after it was already submitted to the for-next branch and not to be rebased. Sparse errors were detected by Fengguang Wu's bot tests, and my internal tests discovered that the anonymous union initialization triggered a bug in older gcc compilers. Luckily, there was a bugzilla for the gcc bug which gave a work around to the problem. The third and fourth patch handled the sparse error and the gcc bug respectively. A final patch was tagged along to fix a missing documentation for the README file" * tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add missing function triggers dump and cpudump to README tracing: Fix anonymous unions in struct ftrace_event_call tracepoint: Fix sparse warnings in tracepoint.c tracepoint: Simplify tracepoint module search tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints |
||
|
Mathieu Desnoyers
|
b725dfea24 |
tracepoint: Fix sparse warnings in tracepoint.c
Fix the following sparse warnings: CHECK kernel/tracepoint.c kernel/tracepoint.c:184:18: warning: incorrect type in assignment (different address spaces) kernel/tracepoint.c:184:18: expected struct tracepoint_func *tp_funcs kernel/tracepoint.c:184:18: got struct tracepoint_func [noderef] <asn:4>*funcs kernel/tracepoint.c:216:18: warning: incorrect type in assignment (different address spaces) kernel/tracepoint.c:216:18: expected struct tracepoint_func *tp_funcs kernel/tracepoint.c:216:18: got struct tracepoint_func [noderef] <asn:4>*funcs kernel/tracepoint.c:392:24: error: return expression in void function CC kernel/tracepoint.o kernel/tracepoint.c: In function tracepoint_module_going: kernel/tracepoint.c:491:6: warning: symbol 'syscall_regfunc' was not declared. Should it be static? kernel/tracepoint.c:508:6: warning: symbol 'syscall_unregfunc' was not declared. Should it be static? Link: http://lkml.kernel.org/r/1397049883-28692-1-git-send-email-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Steven Rostedt (Red Hat)
|
eb7d035c59 |
tracepoint: Simplify tracepoint module search
Instead of copying the num_tracepoints and tracepoints_ptrs from the module structure to the tp_mod structure, which only uses it to find the module associated to tracepoints of modules that are coming and going, simply copy the pointer to the module struct to the tracepoint tp_module structure. Also removed un-needed brackets around an if statement. Link: http://lkml.kernel.org/r/20140408201705.4dad2c4a@gandalf.local.home Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
de7b297390 |
tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
Register/unregister tracepoint probes with struct tracepoint pointer rather than tracepoint name. This change, which vastly simplifies tracepoint.c, has been proposed by Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux size. From this point on, the tracers need to pass a struct tracepoint pointer to probe register/unregister. A probe can now only be connected to a tracepoint that exists. Moreover, tracers are responsible for unregistering the probe before the module containing its associated tracepoint is unloaded. text data bss dec hex filename 10443444 4282528 10391552 25117524 17f4354 vmlinux.orig 10434930 4282848 10391552 25109330 17f2352 vmlinux Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com CC: Ingo Molnar <mingo@kernel.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Frank Ch. Eigler <fche@redhat.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> [ SDR - fixed return val in void func in tracepoint_module_going() ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
6f4c98e1c2 |
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont |
||
|
Linus Torvalds
|
68114e5eb8 |
Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt: "Most of the changes were largely clean ups, and some documentation. But there were a few features that were added: Uprobes now work with event triggers and multi buffers and have support under ftrace and perf. The big feature is that the function tracer can now be used within the multi buffer instances. That is, you can now trace some functions in one buffer, others in another buffer, all functions in a third buffer and so on. They are basically agnostic from each other. This only works for the function tracer and not for the function graph trace, although you can have the function graph tracer running in the top level buffer (or any tracer for that matter) and have different function tracing going on in the sub buffers" * tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Add BUG_ON when stack end location is over written tracepoint: Remove unused API functions Revert "tracing: Move event storage for array from macro to standalone function" ftrace: Constify ftrace_text_reserved tracepoints: API doc update to tracepoint_probe_register() return value tracepoints: API doc update to data argument ftrace: Fix compilation warning about control_ops_free ftrace/x86: BUG when ftrace recovery fails ftrace: Warn on error when modifying ftrace function ftrace: Remove freelist from struct dyn_ftrace ftrace: Do not pass data to ftrace_dyn_arch_init ftrace: Pass retval through return in ftrace_dyn_arch_init() ftrace: Inline the code from ftrace_dyn_table_alloc() ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt tracing: Evaluate len expression only once in __dynamic_array macro tracing: Correctly expand len expressions from __dynamic_array macro tracing/module: Replace include of tracepoint.h with jump_label.h in module.h tracing: Fix event header migrate.h to include tracepoint.h tracing: Fix event header writeback.h to include tracepoint.h tracing: Warn if a tracepoint is not set via debugfs ... |
||
|
Mathieu Desnoyers
|
0dea6d5263 |
tracepoint: Remove unused API functions
After the following commit:
commit
|
||
|
Mathieu Desnoyers
|
66cc69e34e |
Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
Users have reported being unable to trace non-signed modules loaded within a kernel supporting module signature. This is caused by tracepoint.c:tracepoint_module_coming() refusing to take into account tracepoints sitting within force-loaded modules (TAINT_FORCED_MODULE). The reason for this check, in the first place, is that a force-loaded module may have a struct module incompatible with the layout expected by the kernel, and can thus cause a kernel crash upon forced load of that module on a kernel with CONFIG_TRACEPOINTS=y. Tracepoints, however, specifically accept TAINT_OOT_MODULE and TAINT_CRAP, since those modules do not lead to the "very likely system crash" issue cited above for force-loaded modules. With kernels having CONFIG_MODULE_SIG=y (signed modules), a non-signed module is tainted re-using the TAINT_FORCED_MODULE taint flag. Unfortunately, this means that Tracepoints treat that module as a force-loaded module, and thus silently refuse to consider any tracepoint within this module. Since an unsigned module does not fit within the "very likely system crash" category of tainting, add a new TAINT_UNSIGNED_MODULE taint flag to specifically address this taint behavior, and accept those modules within Tracepoints. We use the letter 'X' as a taint flag character for a module being loaded that doesn't know how to sign its name (proposed by Steven Rostedt). Also add the missing 'O' entry to trace event show_module_flags() list for the sake of completeness. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> NAKed-by: Ingo Molnar <mingo@redhat.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: David Howells <dhowells@redhat.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> |
||
|
Mathieu Desnoyers
|
3bbc8db341 |
tracepoints: API doc update to tracepoint_probe_register() return value
Describe the return values of tracepoint_probe_register(), including -ENODEV added by commit: Author: Steven Rostedt <rostedt@goodmis.org> tracing: Warn if a tracepoint is not set via debugfs Link: http://lkml.kernel.org/r/1394499898-1537-2-git-send-email-mathieu.desnoyers@efficios.com CC: Ingo Molnar <mingo@kernel.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
4c11628a16 |
tracepoints: API doc update to data argument
Describe the @data argument (probe private data).
Link: http://lkml.kernel.org/r/1394587948-27878-1-git-send-email-mathieu.desnoyers@efficios.com
Fixes:
|
||
|
Steven Rostedt
|
b196e2b9e2 |
tracing: Warn if a tracepoint is not set via debugfs
Tracepoints were made to allow enabling a tracepoint in a module before that module was loaded. When a tracepoint is enabled and it does not exist, the name is stored and will be enabled when the tracepoint is created. The problem with this approach is that when a tracepoint is enabled when it expects to be there, it gives no warning that it does not exist. To add salt to the wound, if a module is added and sets the FORCED flag, which can happen if it isn't signed properly, the tracepoint code will not enabled the tracepoints, but they will be created in the debugfs system! When a user goes to enable the tracepoint, the tracepoint code will not see it existing and will think it is to be enabled later AND WILL NOT GIVE A WARNING. The tracing will look like it succeeded but will actually be doing nothing. This will cause lots of confusion and headaches for developers trying to figure out why they are not seeing their tracepoints. Link: http://lkml.kernel.org/r/20140213154507.4040fb06@gandalf.local.home Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Steven Rostedt (Red Hat)
|
7dec935a3a |
tracepoint: Do not waste memory on mods with no tracepoints
No reason to allocate tp_module structures for modules that have no
tracepoints. This just wastes memory.
Fixes:
|
||
|
Steven Rostedt (Red Hat)
|
45ab2813d4 |
tracing: Do not add event files for modules that fail tracepoints
If a module fails to add its tracepoints due to module tainting, do not
create the module event infrastructure in the debugfs directory. As the events
will not work and worse yet, they will silently fail, making the user wonder
why the events they enable do not display anything.
Having a warning on module load and the events not visible to the users
will make the cause of the problem much clearer.
Link: http://lkml.kernel.org/r/20140227154923.265882695@goodmis.org
Fixes:
|
||
|
Linus Torvalds
|
9e8529afc4 |
Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt: "Along with the usual minor fixes and clean ups there are a few major changes with this pull request. 1) Multiple buffers for the ftrace facility This feature has been requested by many people over the last few years. I even heard that Google was about to implement it themselves. I finally had time and cleaned up the code such that you can now create multiple instances of the ftrace buffer and have different events go to different buffers. This way, a low frequency event will not be lost in the noise of a high frequency event. Note, currently only events can go to different buffers, the tracers (ie function, function_graph and the latency tracers) still can only be written to the main buffer. 2) The function tracer triggers have now been extended. The function tracer had two triggers. One to enable tracing when a function is hit, and one to disable tracing. Now you can record a stack trace on a single (or many) function(s), take a snapshot of the buffer (copy it to the snapshot buffer), and you can enable or disable an event to be traced when a function is hit. 3) A perf clock has been added. A "perf" clock can be chosen to be used when tracing. This will cause ftrace to use the same clock as perf uses, and hopefully this will make it easier to interleave the perf and ftrace data for analysis." * tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits) tracepoints: Prevent null probe from being added tracing: Compare to 1 instead of zero for is_signed_type() tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT ftrace: Get rid of ftrace_profile_bits tracing: Check return value of tracing_init_dentry() tracing: Get rid of unneeded key calculation in ftrace_hash_move() tracing: Reset ftrace_graph_filter_enabled if count is zero tracing: Fix off-by-one on allocating stat->pages kernel: tracing: Use strlcpy instead of strncpy tracing: Update debugfs README file tracing: Fix ftrace_dump() tracing: Rename trace_event_mutex to trace_event_sem tracing: Fix comment about prefix in arch_syscall_match_sym_name() tracing: Convert trace_destroy_fields() to static tracing: Move find_event_field() into trace_events.c tracing: Use TRACE_MAX_PRINT instead of constant tracing: Use pr_warn_once instead of open coded implementation ring-buffer: Add ring buffer startup selftest tracing: Bring Documentation/trace/ftrace.txt up to date tracing: Add "perf" trace_clock ... Conflicts: kernel/trace/ftrace.c kernel/trace/trace.c |
||
|
Sahara
|
4c69e6ea41 |
tracepoints: Prevent null probe from being added
Somehow tracepoint_entry_add_probe() function allows a null probe function. And, this may lead to unexpected results since the number of probe functions in an entry can be counted by checking whether a probe is null or not in the for-loop. This patch prevents a null probe from being added. In tracepoint_entry_remove_probe() function, checking probe parameter within the for-loop is moved out for code efficiency, leaving the null probe feature which removes all probe functions in the entry. Link: http://lkml.kernel.org/r/1365991995-19445-1-git-send-email-kpark3469@gmail.com Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Sahara <keun-o.park@windriver.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |