When relocating the p2m, take special care not to relocate it so
that is overlaps with the current location of the p2m/initrd. This is
needed since the full extent of the current location is not marked as a
reserved region in the e820.
This was seen to happen to a dom0 with a large initial p2m and a small
reserved region in the middle of the initial p2m.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull parisc updates from Helge Deller:
- add Kernel address space layout randomization support
- re-enable interrupts earlier now that we have a working IRQ stack
- optimize the timer interrupt function to better cope with missed
timer irqs
- fix error return code in parisc perf code (by Dan Carpenter)
- fix PAT debug code
* 'parisc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Optimize timer interrupt function
parisc: perf: return -EFAULT on error
parisc: Enhance CPU detection code on PAT machines
parisc: Re-enable interrupts early
parisc: Enable KASLR
kvm_skip_emulated_instruction() should not be called after emulating
a VM-entry failure during or after loading guest state
(nested_vmx_entry_failure()). Otherwise the L1 hypervisor is resumed
some number of bytes past vmcs->host_rip.
Fixes: eb27756217
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we switch to virtual addresses and, especially after
reserve_initrd()->relocate_initrd() have run, we have the updated initrd
address in initrd_start. Use initrd_start then instead of the address
which has been passed to us through boot params. (That still gets used
when we're running the very early routines on the BSP).
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20161220144012.lc4cwrg6dphqbyqu@pd.tnic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since all users are cleaned up, remove the 2 deprecated APIs due to no
users.
As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap
is renamed to acpi_permanent_mmap to have a consistent coding style across
entire Linux ACPI subsystem.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull networking fixes and cleanups from David Miller:
1) Use rb_entry() instead of hardcoded container_of(), from Geliang
Tang.
2) Use correct memory barriers in stammac driver, from Pavel Machek.
3) Fix assoc bind address handling in SCTP, from Xin Long.
4) Make the length check for UFO handling consistent between
__ip_append_data() and ip_finish_output(), from Zheng Li.
5) HSI driver compatible strings were busted fro hix5hd2, from Dongpo
Li.
6) Handle devm_ioremap() errors properly in cavium driver, from Arvind
Yadav.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
RDS: use rb_entry()
net_sched: sch_netem: use rb_entry()
net_sched: sch_fq: use rb_entry()
net/mlx5: use rb_entry()
ethernet: sfc: Add Kconfig entry for vendor Solarflare
sctp: not copying duplicate addrs to the assoc's bind address list
sctp: reduce indent level in sctp_copy_local_addr_list
ARM: dts: hix5hd2: don't change the existing compatible string
net: hix5hd2_gmac: fix compatible strings name
openvswitch: Add a missing break statement.
net: netcp: ethss: fix 10gbe host port tx pri map configuration
net: netcp: ethss: fix errors in ethtool ops
fsl/fman: enable compilation on ARM64
fsl/fman: A007273 only applies to PPC SoCs
powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
fsl/fman: fix 1G support for QSGMII interfaces
dt: bindings: net: use boolean dt properties for eee broken modes
net: phy: use boolean dt properties for eee broken modes
net: phy: fix sign type error in genphy_config_eee_advert
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
...
Merge final set of updates from Andrew Morton:
- a series to make IMA play better across kexec
- a handful of random fixes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text
ratelimit: fix WARN_ON_RATELIMIT return value
kcov: make kcov work properly with KASLR enabled
arm64: setup: introduce kaslr_offset()
mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
ima: platform-independent hash value
ima: define a canonical binary_runtime_measurements list format
ima: support restoring multiple template formats
ima: store the builtin/custom template definitions in a list
ima: on soft reboot, save the measurement list
powerpc: ima: send the kexec buffer to the next kernel
ima: maintain memory size needed for serializing the measurement list
ima: permit duplicate measurement list entries
ima: on soft reboot, restore the measurement list
powerpc: ima: get the kexec buffer passed by the previous kernel
Pull arch/microblaze updates from Michal Simek:
- wire-up new syscalls
- add new codes and fpga families
- fix a return value
* tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add new fpga families
microblaze: Add missing release version code v9.6 and v10
microblaze: Add missing syscalls
microblaze: Fix return value from xilinx_timer_init
Pull Xtensa updates from Max Filippov:
- enable HAVE_DMA_CONTIGUOUS, configure shared DMA pool reservation in
kc705 DTS
- update xtensa DMA-related Documentation/features entries
- clean up arch/xtensa/kernel/setup.c: move S32C1I self-test out of it,
remove unused declarations, fix screen_info definition
* tag 'xtensa-20161219' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: update DMA-related Documentation/features entries
xtensa: configure shared DMA pool reservation in kc705 DTS
xtensa: enable HAVE_DMA_CONTIGUOUS
xtensa: move S32C1I self-test to a separate file
xtensa: fix screen_info, clean up unused declarations in setup.c
Restructure the timer interrupt function to better cope with missed timer irqs.
Optimize the calculation when the next interrupt should happen and skip irqs if
they would happen too shortly after exit of the irq function.
The update_process_times() call is done anyway at every timer irq, so we can
safely drop the prof_counter and prof_multiplier variables from the per_cpu
structure.
Signed-off-by: Helge Deller <deller@gmx.de>
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change it.
We should only add the generic compatible string "hisi-gmac-v1".
Fixes: 0855950ba5 ("ARM: dts: hix5hd2: add gmac generic compatible and clock names")
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fsl/fman drivers will use of_platform_populate() on all
supported platforms. Call of_platform_populate() to probe the
FMan sub-nodes.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch series "ima: carry the measurement list across kexec", v8.
The TPM PCRs are only reset on a hard reboot. In order to validate a
TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement
list of the running kernel must be saved and then restored on the
subsequent boot, possibly of a different architecture.
The existing securityfs binary_runtime_measurements file conveniently
provides a serialized format of the IMA measurement list. This patch
set serializes the measurement list in this format and restores it.
Up to now, the binary_runtime_measurements was defined as architecture
native format. The assumption being that userspace could and would
handle any architecture conversions. With the ability of carrying the
measurement list across kexec, possibly from one architecture to a
different one, the per boot architecture information is lost and with it
the ability of recalculating the template digest hash. To resolve this
problem, without breaking the existing ABI, this patch set introduces
the boot command line option "ima_canonical_fmt", which is arbitrarily
defined as little endian.
The need for this boot command line option will be limited to the
existing version 1 format of the binary_runtime_measurements.
Subsequent formats will be defined as canonical format (eg. TPM 2.0
support for larger digests).
A simplified method of Thiago Bauermann's "kexec buffer handover" patch
series for carrying the IMA measurement list across kexec is included in
this patch set. The simplified method requires all file measurements be
taken prior to executing the kexec load, as subsequent measurements will
not be carried across the kexec and restored.
This patch (of 10):
The IMA kexec buffer allows the currently running kernel to pass the
measurement list via a kexec segment to the kernel that will be kexec'd.
The second kernel can check whether the previous kernel sent the buffer
and retrieve it.
This is the architecture-specific part which enables IMA to receive the
measurement list passed by the previous kernel. It will be used in the
next patch.
The change in machine_kexec_64.c is to factor out the logic of removing
an FDT memory reservation so that it can be used by remove_ima_buffer.
Link: http://lkml.kernel.org/r/1480554346-29071-2-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
s390 version of commit 334bb77387 ("x86/kbuild: enable modversions
for symbols exported from asm") so we get also rid of all these
warnings:
WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memcpy" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memmove" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "save_fpu_regs" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie64a" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie_exit" [vmlinux] version generation failed, symbol will not be versioned.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is a slight misaccounting of system time in vtime_account_user.
This function is called once per HZ tick in interrupt context.
The irq_enter function already accounted the system time up to the
point of the irq_enter call. The system time from irq_enter until
vtime_account_user/do_account_vtime is reached is irq time but it
is accounted to the previous context.
Just drop the hardirq offset from arch/s390/kernel/vtime.c.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We use sync_core() in the alternatives code to stop speculative
execution of prefetched instructions because we are potentially changing
them and don't want to execute stale bytes.
What it does on most machines is call CPUID which is a serializing
instruction. And that's expensive.
However, the instruction cache is serialized when we're on the local CPU
and are changing the data through the same virtual address. So then, we
don't need the serializing CPUID but a simple control flow change. Last
being accomplished with a CALL/RET which the noinline causes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161203150258.vwr5zzco7ctgc4pe@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is a feature in Hyper-V ('Debug-VM --InjectNonMaskableInterrupt')
which injects NMI to the guest. We may want to crash the guest and do kdump
on this NMI by enabling unknown_nmi_panic. To make kdump succeed we need to
allow the kdump kernel to re-establish VMBus connection so it will see
VMBus devices (storage, network,..).
To properly unload VMBus making it possible to start over during kdump we
need to do the following:
- Send an 'unload' message to the hypervisor. This can be done on any CPU
so we do this the crashing CPU.
- Receive the 'unload finished' reply message. WS2012R2 delivers this
message to the CPU which was used to establish VMBus connection during
module load and this CPU may differ from the CPU sending 'unload'.
Receiving a VMBus message means the following:
- There is a per-CPU slot in memory for one message. This slot can in
theory be accessed by any CPU.
- We get an interrupt on the CPU when a message was placed into the slot.
- When we read the message we need to clear the slot and signal the fact
to the hypervisor. In case there are more messages to this CPU pending
the hypervisor will deliver the next message. The signaling is done by
writing to an MSR so this can only be done on the appropriate CPU.
To avoid doing cross-CPU work on crash we have vmbus_wait_for_unload()
function which checks message slots for all CPUs in a loop waiting for the
'unload finished' messages. However, there is an issue which arises when
these conditions are met:
- We're crashing on a CPU which is different from the one which was used
to initially contact the hypervisor.
- The CPU which was used for the initial contact is blocked with interrupts
disabled and there is a message pending in the message slot.
In this case we won't be able to read the 'unload finished' message on the
crashing CPU. This is reproducible when we receive unknown NMIs on all CPUs
simultaneously: the first CPU entering panic() will proceed to crash and
all other CPUs will stop themselves with interrupts disabled.
The suggested solution is to handle unknown NMIs for Hyper-V guests on the
first CPU which gets them only. This will allow us to rely on VMBus
interrupt handler being able to receive the 'unload finish' message in
case it is delivered to a different CPU.
The issue is not reproducible on WS2016 as Debug-VM delivers NMI to the
boot CPU only, WS2012R2 and earlier Hyper-V versions are affected.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: devel@linuxdriverproject.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Link: http://lkml.kernel.org/r/20161202100720.28121-1-vkuznets@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An ARC700 customer reported linux boot crashes when upgrading to bigger
L1 dcache (64K from 32K). Turns out they had an aliasing VIPT config and
current code only assumed 2 colours, while theirs had 4. So default to 4
colours and complain if there are fewer. Ideally this needs to be a
Kconfig option, but heck that's too much of hassle for a single user.
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Historical MMU revisions have been paired with Cache revision updates
which are captured in MMU and Cache Build Configuration Registers respectively.
This was used in boot code to check for configurations mismatches,
speically in simulations (such as running with non existent caches,
non pairing MMU and Cache version etc). This can instead be inferred
from other cache params such as line size. So remove @ver from post
processed @cpuinfo which could be used later to save soem other
interesting info.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Pull KVM fixes from Paolo Bonzini:
"Early fixes for x86.
Instead of the (botched) revert, the lockdep/might_sleep splat has a
real fix provided by Andrea"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
kvm: take srcu lock around kvm_steal_time_set_preempted()
kvm: fix schedule in atomic in kvm_steal_time_set_preempted()
KVM: hyperv: fix locking of struct kvm_hv fields
KVM: x86: Expose Intel AVX512IFMA/AVX512VBMI/SHA features to guest.
kvm: nVMX: Correct a VMX instruction error code for VMPTRLD
When L2 exits to L0 due to "exception or NMI", software exceptions
(#BP and #OF) for which L1 has requested an intercept should be
handled by L1 rather than L0. Previously, only hardware exceptions
were forwarded to L1.
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_memslots() will be called by kvm_write_guest_offset_cached() so
take the srcu lock.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_steal_time_set_preempted() isn't disabling the pagefaults before
calling __copy_to_user and the kernel debug notices.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the flag swiotlb_force from an int to an enum, to prepare for
the advent of more possible values.
Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
At the end of the function, the local variable use_swiotlb has always
the same value as the global variable swiotlb. Hence drop the local
variable completely.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
gcc-7 warns:
In file included from arch/x86/tools/relocs_64.c:17:0:
arch/x86/tools/relocs.c: In function ‘process_64’:
arch/x86/tools/relocs.c:953:2: warning: argument 1 null where non-null expected [-Wnonnull]
qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/tools/relocs.h:6:0,
from arch/x86/tools/relocs_64.c:1:
/usr/include/stdlib.h:741:13: note: in a call to function ‘qsort’ declared here
extern void qsort
This happens because relocs16 is not used for ELF_BITS == 64,
so there is no point in trying to sort it.
Make the sort_relocs(&relocs16) call 32bit only.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/20161215124513.GA289@x4
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Somehow, CONFIG_PARAVIRT=n convinces gcc to change the
x86_64_start_kernel() prologue from:
0000000000000129 <x86_64_start_kernel>:
129: 55 push %rbp
12a: 48 89 e5 mov %rsp,%rbp
to:
0000000000000124 <x86_64_start_kernel>:
124: 4c 8d 54 24 08 lea 0x8(%rsp),%r10
129: 48 83 e4 f0 and $0xfffffffffffffff0,%rsp
12d: 41 ff 72 f8 pushq -0x8(%r10)
131: 55 push %rbp
132: 48 89 e5 mov %rsp,%rbp
This is an unusual pattern which aligns rsp (though in this case it's
already aligned) and saves the start_cpu() return address again on the
stack before storing the frame pointer.
The unwinder assumes the last stack frame header is at a certain offset,
but the above code breaks that assumption, resulting in the following
warning:
WARNING: kernel stack frame pointer at ffffffff82e03f40 in swapper:0 has bad value (null)
Fix it by checking for the last task stack frame at the aligned offset
in addition to the normal unaligned offset.
Fixes: acb4608ad1 ("x86/unwind: Create stack frames for saved syscall registers")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/9d7b4eb8cf55a7d6002cb738f25c23e7429c99a0.1481904011.git.jpoimboe@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add i8042 state to the platform data to help i8042 driver make decision
whether to probe for i8042 or not. We recognize 3 states: platform/subarch
ca not possible have i8042 (as is the case with Inrel MID platform),
firmware (such as ACPI) reports that i8042 is absent from the device,
or i8042 may be present and the driver should probe for it.
The intent is to allow i8042 driver abort initialization on x86 if PNP data
(absence of both keyboard and mouse PNP devices) agrees with firmware data.
It will also allow us to remove i8042_detect later.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/1481317061-31486-2-git-send-email-dmitry.torokhov@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Doing so is completely void of sense for multiple reasons so prevent
it. Set dis_ucode_ldr to true and thus disable the microcode loader by
default to address xen pv guests which execute the AP path but not the
BSP path.
By having it turned off by default, the APs won't run into the loader
either.
Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the
xen pv one. That one gets the aforementioned "fix".
Also, improve the detection method by caching the final decision whether
to continue loading in dis_ucode_ldr and do it once on the BSP. The APs
then simply test that value.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/20161218164414.9649-4-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- non-modular drivers are now explicitly non-modular
New driver:
- Epson Toyocom rtc-7301sf/dg
Drivers:
- cmos: reject unsupported alarm values wrt the RTC capabilities
- ds1307: ACPI support
- jz4740: DT support, jz4780 handling, can now be used as a system
power controller
- mcp795: many fixes, in particular proper month handling
- twl: driver is now DT only"
* tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
rtc: mcp795: Fix whitespace and indentation.
rtc: mcp795: Prefer using the BIT() macro.
rtc: mcp795: fix month write resetting date to 1.
rtc: mcp795: fix time range difference between linux and RTC chip.
rtc: mcp795: fix bitmask value for leap year (LP).
rtc: mcp795: use bcd2bin/bin2bcd.
rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
rtc: ds1307: Add ACPI support
rtc: imxdi: (trivial) fix a typo
rtc: ds1374: Merge conditional + WARN_ON()
rtc: twl: make driver DT only
rtc: twl: kill static variables
rtc: fix typos in Kconfig
rtc: jz4740: make the driver builtin only
rtc: jz4740: remove unused EXPORT_SYMBOL
Documentation: bindings: fix twl-rtc documentation
rtc: Enable compile testing for Maxim and Samsung drivers
MIPS: jz4740: Remove obsolete code
MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller
MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree
...
Pull more x86 platform driver updates from Darren Hart:
"Move and add registration for the mlx-platform driver. Introduce
button and lid drivers for the surface3 (different from the
surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing
ideapad-laptop quirk.
Summary:
ideapad-laptop:
- Add Y700 15-ACZ to no_hw_rfkill DMI list
surface3_button:
- Introduce button support for the Surface 3
surface3-wmi:
- Add custom surface3 platform device for controlling LID
- Balance locking on error path
mlx-platform:
- Add mlxcpld-hotplug driver registration
- Fix semicolon.cocci warnings
- Move module from arch/x86
platform/x86:
- Add Whiskey Cove PMIC TMU support"
* tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: surface3-wmi: Balance locking on error path
platform/x86: Add Whiskey Cove PMIC TMU support
platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
platform/x86: Introduce button support for the Surface 3
platform/x86: Add custom surface3 platform device for controlling LID
platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
platform/x86: mlx-platform: Fix semicolon.cocci warnings
platform/x86: mlx-platform: Move module from arch/x86
Pull timer updates from Thomas Gleixner:
"This is the last functional update from the tip tree for 4.10. It got
delayed due to a newly reported and anlyzed variant of BIOS bug and
the resulting wreckage:
- Seperation of TSC being marked realiable and the fact that the
platform provides the TSC frequency via CPUID/MSRs and making use
for it for GOLDMONT.
- TSC adjust MSR validation and sanitizing:
The TSC adjust MSR contains the offset to the hardware counter. The
sum of the adjust MSR and the counter is the TSC value which is
read via RDTSC.
On at least two machines from different vendors the BIOS sets the
TSC adjust MSR to negative values. This happens on cold and warm
boot. While on cold boot the offset is a few milliseconds, on warm
boot it basically compensates the power on time of the system. The
BIOSes are not even using the adjust MSR to set all CPUs in the
package to the same offset. The offsets are different which renders
the TSC unusable,
What's worse is that the TSC deadline timer has a HW feature^Wbug.
It malfunctions when the TSC adjust value is negative or greater
equal 0x80000000 resulting in silent boot failures, hard lockups or
non firing timers. This looks like some hardware internal 32/64bit
issue with a sign extension problem. Intel has been silent so far
on the issue.
The update contains sanity checks and keeps the adjust register
within working limits and in sync on the package.
As it looks like this disease is spreading via BIOS crapware, we
need to address this urgently as the boot failures are hard to
debug for users"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Limit the adjust value further
x86/tsc: Annotate printouts as firmware bug
x86/tsc: Force TSC_ADJUST register to value >= zero
x86/tsc: Validate TSC_ADJUST after resume
x86/tsc: Validate cpumask pointer before accessing it
x86/tsc: Fix broken CONFIG_X86_TSC=n build
x86/tsc: Try to adjust TSC if sync test fails
x86/tsc: Prepare warp test for TSC adjustment
x86/tsc: Move sync cleanup to a safe place
x86/tsc: Sync test only for the first cpu in a package
x86/tsc: Verify TSC_ADJUST from idle
x86/tsc: Store and check TSC ADJUST MSR
x86/tsc: Detect random warps
x86/tsc: Use X86_FEATURE_TSC_ADJUST in detect_art()
x86/tsc: Finalize the split of the TSC_RELIABLE flag
x86/tsc: Set TSC_KNOWN_FREQ and TSC_RELIABLE flags on Intel Atom SoCs
x86/tsc: Mark Intel ATOM_GOLDMONT TSC reliable
x86/tsc: Mark TSC frequency determined by CPUID as known
x86/tsc: Add X86_FEATURE_TSC_KNOWN_FREQ flag
Pull x86 fixes and cleanups from Thomas Gleixner:
"This set of updates contains:
- Robustification for the logical package managment. Cures the AMD
and virtualization issues.
- Put the correct start_cpu() return address on the stack of the idle
task.
- Fixups for the fallout of the nodeid <-> cpuid persistent mapping
modifciations
- Move the x86/MPX specific mm_struct member to the arch specific
mm_context where it belongs
- Cleanups for C89 struct initializers and useless function
arguments"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/floppy: Use designated initializers
x86/mpx: Move bd_addr to mm_context_t
x86/mm: Drop unused argument 'removed' from sync_global_pgds()
ACPI/NUMA: Do not map pxm to node when NUMA is turned off
x86/acpi: Use proper macro for invalid node
x86/smpboot: Prevent false positive out of bounds cpumask access warning
x86/boot/64: Push correct start_cpu() return address
x86/boot/64: Use 'push' instead of 'call' in start_cpu()
x86/smpboot: Make logical package management more robust
