Field "substream" gets assigned during stream setup in
hda_dsp_pcm_hw_params() but it is never cleared afterwards during
cleanup procedure. Now, any non-pcm operation e.g.: compress can
mistakenly make use of that pointer as it's bypassing all
"if (s->substream)" checks.
Nulling the pointer during hw_free operation ensures no wild pointers
are left behind.
Fixes: cdae3b9a47aa ("ASoC: SOF: Intel: Add Intel specific HDA PCM operations")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312120058.15057-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As discussion in ALSA https://patchwork.kernel.org/patch/11336023/, it
is suggested to skip DMA buffer pre-allocation with passing size=0 when
calling snd_pcm_set_managed_buffer(), to make the full buffer_bytes
range configured in topology file selectable from user space, here do
the corresponding change in SOF PCM driver to implement it.
This change doesn't have dependency to the change that Takashi will do
in the ALSA core by adding total_pcm_alloc_bytes limitation to the
struct snd_card, it passes tests both with or without Takashi's coming
change on SOF CML platform.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Link: https://lore.kernel.org/r/20200228231850.9226-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define debugfs subdirectory delegated for IPC communication with DSP.
Input format: uint,uint,(...) which are later translated into DWORDS
sequence and further into instances of struct of interest given the IPC
type.
For Extractor probes, following have been enabled:
- PROBE_POINT_ADD (echo <..> probe_points)
- PROBE_POINT_REMOVE (echo <..> probe_points_remove)
- PROBE_POINT_INFO (cat probe_points)
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200218143924.10565-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define system-agnostic probe compress flow which serves as a base for
actual, hardware-dependent implementations.
As per firmware spec, maximum of one extraction stream is allowed, while
for injection, there can be plenty.
Apart from probe_pointer, all probe compress operations are mandatory.
Copy operation is defined as unified as its flow should be shared across
all SOF systems.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200218143924.10565-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add all required types and methods to support each and every request
that driver could sent to firmware. Probe is one of SOF firmware
features which allows for data extraction and injection directly from
or to DMA stream.
Exposes eight IPCs:
- addition and removal of injection DMAs
- addition and removal of probe points
- info retrieval of injection DMAs and probe points
- probe initialization and cleanup
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200218143924.10565-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements support for DSP D0i3 when the system
is in S0. The basic idea is to schedule a delayed work after
every successful IPC TX that checks if there are only
D0I3-compatible streams active and if so transition
the DSP to D0I3.
With the introduction of DSP D0I3 in S0, we need to
ensure that the DSP is in D0I0 before sending any new
IPCs. The exception for this would be the
compact IPCs that are used to set the DSP in
D0I3/D0I0 states.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP device substates such as D0I0/D0I3
are platform-specific. Therefore, the d0_substate
field of struct snd_sof_dev is replaced
with the dsp_power_state field which represents the current
state of the DSP. This field holds both the device state
and the platform-specific substate values.
With the DSP device substates being platform-specific,
the DSP power state transitions need to be performed in
the platform-specific suspend/resume ops as well.
In order to achieve this, the ops signature has to be
modified to pass the target device state as an
argument. The target substate will be determined by
the platform-specific ops before performing the transition.
For example, in the case of the system suspending to S0IX,
the top-level SOF device suspend callback needs to
only determine if the DSP will be entering
D3 or remain in D0. The target substate in case the device
needs to remain in D0 (D0I0 or D0I3) will be determined
by the platform-specific suspend op.
With the addition of the extended set of power states for the DSP,
the set_power_state op for HDA platforms has to be extended
to handle only the appropriate state transitions. So, the
implementation for the Intel HDA platforms is also modified.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new enum sof_dsp_power_states for all the possible
the DSP device states. The SOF driver currently handles
only the D0 and D3 states and support for other states
will be added later as needed.
Also, add a helper to determine the target DSP power state
based on the system suspend target.
The snd_sof_dsp_d0i3_on_suspend() function is renamed to
snd_sof_stream_suspend_ignored() to be more indicative
of what it does and it used to determine the target
DSP state during system suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be compliant with i915 display driver requirements, i915 power-up
must be done before any HDA communication takes place, including
parsing the bus capabilities. Otherwise the initial codec probe
may fail.
Move i915 initialization earlier in the SOF HDA sequence. This
sequence is now aligned with the snd-hda-intel driver where the
display_power() call is before snd_hdac_bus_parse_capabilities()
and rest of the capability parsing.
Also remove unnecessary ifdef around hda_codec_i915_init(). There's
a dummy implementation provided if CONFIG_SND_SOC_SOF_HDA is not
enabled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When HDA controller is resumed from suspend, i915 HDMI/DP
codec requires that following order of actions is kept:
- i915 display power up and configuration of link params
- hda link reset and setup
Current SOF HDA code delegates display codec power control
to the codec driver. This works most of the time, but in
runtime PM sequences, the above constraint may be violated.
On platforms where BIOS values for HDA link parameters do
not match hardware reset defaults, this may lead to errors
in HDA verb transactions after resume.
Fix the issue by explicitly powering the display codec
in the HDA controller resume/suspend calls, thus ensuring
correct ordering. Special handling is needed for the D0i3
flow, where display power must be turned off even though
DSP is left powered.
Now that we have more invocations of the display power helper
functions, the conditional checks surrounding each call have
been moved inside hda_codec_i915_display_power(). The two
special cases of display powering at initial probe are handled
separately. The intent is to avoid powering the display whenever
no display codecs are used.
Note that early powering of display was removed in
commit 687ae9e287 ("ASoC: intel: skl: Fix display power regression").
This change was also copied to the SOF driver. No failures
have resulted as hardware default values for link parameters
have worked out of the box. However with recent i915 driver
changes like done in commit 87c1694533 ("drm/i915: save
AUD_FREQ_CNTRL state at audio domain suspend"), this does not
hold anymore and errors are hit.
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v5.6
A collection of updates for bugs fixed since the initial pull
request, the most important one being the addition of COMMON_CLK
for wcd934x which is needed for MFD to be merged.
The current interface to control i915 display power is misleading.
The hda_codec_i915_get() and hda_codec_i915_put() names suggest
a refcounting based interface. This is confusing as no refcounting
is done and the underlying HDAC library interface does not support
refcounts eithers.
Clarify the code by replacing the functions with a single
hda_codec_i915_display_power() that is aligned with
snd_hdac_display_power().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200120160117.29130-2-kai.vehmanen@linux.intel.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v5.5
This is mostly driver specific fixes, plus an error handling fix
in the core. There is a rather large diffstat for the stm32 SAI
driver, this is a very large but mostly mechanical update which
wraps every register access in the driver to allow a fix to the
locking which avoids circular locks, the active change is much
smaller and more reasonably sized.
