Pull core block updates from Jens Axboe:
"This may be the most quiet round we've had in years. I'm not
complaining. Really not a lot to detail here, outside of spelling and
documentation improvements/fixes, we have:
- Allow t10-pi to be modular (Herbert)
- Remove dead code in bfq (Alex)
- Mark zone management requests with REQ_SYNC (Chaitanya)
- BFQ division improvement (Wen)
- Small series improving plugging (Pavel)"
* tag 'for-5.6/block-2020-01-27' of git://git.kernel.dk/linux-block:
partitions/ldm: fix spelling mistake "to" -> "too"
block, bfq: improve arithmetic division in bfq_delta()
block/bfq: remove unused bfq_class_rt which never used
block: mark zone-mgmt bios with REQ_SYNC
blk-mq: Document functions for sending request
block: Allow t10-pi to be modular
blk-mq: optimise blk_mq_flush_plug_list()
list: introduce list_for_each_continue()
blk-mq: optimise rq sort function
Pull block fix from Jens Axboe:
"Unfortunately this weekend we had a few last minute reports, one was
for block.
The partition disable for zoned devices was overly restrictive, it can
work (and be supported) just fine for host-aware variants.
Here's a fix ensuring that's the case so we don't break existing users
of that"
* tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
block: allow partitions on host aware zone devices
Pull SCSI fixes from James Bottomley:
"Two last minute fixes, both in drivers.
The fnic one is a highly unlikely condition, but the RDMA one is a
recently introduced regression that causes a kernel warning to trigger
in every RDMA logon, which would be unsightly if it got into the final
release"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: RDMA/isert: Fix a recently introduced regression related to logout
scsi: fnic: do not queue commands during fwreset
Host-aware SMR drives can be used with the commands to explicitly manage
zone state, but they can also be used as normal disks. In the former
case it makes perfect sense to allow partitions on them, in the latter
it does not, just like for host managed devices. Add a check to
add_partition to allow partitions on host aware devices, but give
up any zone management capabilities in that case, which also catches
the previously missed case of adding a partition vs just scanning it.
Because sd can rescan the attribute at runtime it needs to check if
a disk has partitions, for which a new helper is added to genhd.h.
Fixes: 5eac3eb30c ("block: Remove partition support for zoned block devices")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a link is going down the driver will be calling fnic_cleanup_io(),
which will traverse all commands and calling 'done' for each found command.
While the traversal is handled under the host_lock, calling 'done' happens
after the host_lock is being dropped.
As fnic_queuecommand_lck() is being called with the host_lock held, it
might well be that it will pick the command being selected for abortion
from the above routine and enqueue it for sending, but then 'done' is being
called on that very command from the above routine.
Which of course confuses the hell out of the scsi midlayer.
So fix this by not queueing commands when fnic_cleanup_io is active.
Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently IRQ_EFFECTIVE_AFF_MASK is enabled for ARM_GIC and ARM_GIC3, so it
only allows a single target CPU in the affinity mask to process interrupts
and also interrupt thread, and the performance of using threaded irq is
almost the same as tasklet. But if the config is not enabled, the interrupt
thread will be allowed all the CPUs in the affinity mask. At that situation
it improves the performance (about 20%).
Note: IRQ_EFFECTIVE_AFF_MASK is configured differently for different
architecture chip, and it seems to be better to make it be configured
easily.
Link: https://lore.kernel.org/r/1579522957-4393-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch has two major non-functionality changes:
1. Take scanning host if-statement out from ufshcd_probe_hba(), and move
into a new added function ufshcd_add_lus(). In this new function
ufshcd_add_lus(), the main functionalitis include: ICC initialization, add
well-known LUs, devfreq initialization, UFS bsg probe and scsi host
scan. The reason for this change is that these functionalities only being
called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the
processes of error handling and power management ufshcd_suspend(),
ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis
above metioned are not hit.
2. Move context of initialization of parameters associated with the UFS
device to a new added function ufshcd_device_params_init(). The reason of
this change is that all of these parameters are used by driver, but only
need to be initialized once when booting. Combine them into an integral
function, make them easier maintain.
Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Three fixes in drivers with no impact to core code.
The mptfusion fix is enormous because the driver API had to be
rethreaded to pass down the necessary iocp pointer, but once that's
done a significant chunk of code is deleted.
The other two patches are small"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptfusion: Fix double fetch bug in ioctl
scsi: storvsc: Correctly set number of hardware queues for IDE disk
scsi: fnic: fix invalid stack access
IOCTLs causing firmware fault may end up in failed controller resets and
finally killing the adapter.
This patch fixes this problem as stated below:
In OCR sequence, driver will attempt refiring pended IOCTLs upto two times.
If first two attempts fail, then in third attempt driver will return pended
IOCTLs with EBUSY status to application. These changes are done to ensure
if any of pended IOCTLs is causing firmware fault and resulting into OCR
failure, then in last attempt of OCR driver will refrain firing it to
firmware and saving adapter from being killed due to faulty IOCTL.
Link: https://lore.kernel.org/r/1579000882-20246-10-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 0ed8810276 ("scsi: storvsc: setup 1:1 mapping between hardware
queue and CPU queue") introduced a regression for disks attached to
IDE. For these disks the host VSP only offers one VMBUS channel. Setting
multiple queues can overload the VMBUS channel and result in performance
drop for high queue depth workload on system with large number of CPUs.
Fix it by leaving the number of hardware queues to 1 (default value) for
IDE disks.
Fixes: 0ed8810276 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue")
Link: https://lore.kernel.org/r/1578960516-108228-1-git-send-email-longli@linuxonhyperv.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc -O3 warns that some local variables are not properly initialized:
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[0] = *a0;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
u64 a0, a1;
^~
Apparently the code relies on the local variables occupying adjacent memory
locations in the same order, but this is of course not guaranteed.
Use an array of two u64 variables where needed to make it work correctly.
I suspect there is also an endianness bug here, but have not digged in deep
enough to be sure.
Fixes: 5df6d737dd ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the transport cannot be registered, the session/connection creation
needs to be failed early to let the initiator know. Otherwise, the system
will have an outstanding connection that cannot be used nor removed by
open-iscsi. The result is similar to the error below, triggered by
injecting a failure in the transport's registration path.
openiscsi reports success:
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l
Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260]
Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful.
But cannot remove the session afterwards, since the kernel is in an
inconsistent state.
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u
iscsiadm: No matching sessions found
Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Two simple fixes in the upper drivers (so both fairly core), one in
enclosures, which fixes replugging a device into an enclosure slot and
one in the disk driver which fixes revalidating a drive with
protection information (PI) to make it a non-PI drive ... previously
we were still remembering the old PI state.
Both fixed issues are quite rare in the field"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: enclosure: Fix stale device oops with hot replug
scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.
Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).
[mkp: commit desc]
Fixes: fe542396da ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
