We have yet another new scheme for NVRAM, and a corresponding new MCDI.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since ethtool_common.o will be built into both sfc and sfc_ef100 drivers,
it can't use KBUILD_MODNAME directly. Instead, make it reference a
string provided by the individual driver code.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously this was only happening in ef10-specific code.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
_down() merely removes all our filters and VLANs, it doesn't free
efx->filter_state itself.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we only allocate VIs for the number of TXQs we actually need, we
cannot naively use "channel * TXQ_TYPES + txq" for the TXQ number, as
this has gaps (when efx->tx_queues_per_channel < EFX_TXQ_TYPES) and
thus overruns the driver's VI allocations, causing the firmware to
reject the MC_CMD_INIT_TXQ based on INSTANCE.
Thus, we distinguish INSTANCE (stored in tx_queue->queue) from LABEL
(tx_queue->label); the former is allocated starting from 0 in
efx_set_channels(), while the latter is simply the txq type (index in
channel->tx_queue array).
To simplify things, rather than changing tx_queues_per_channel after
setting up TXQs, make Siena always probe its HIGHPRI queues at start
of day, rather than deferring it until tc mqprio enables them.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Siena needs four TX queues (csum * highpri), EF10 needs two (csum),
and EF100 only needs one (as checksumming is controlled entirely by
the transmit descriptor). Rather than having various bits of ad-hoc
code to decide which queues to set up etc., put the knowledge of how
many TXQs a channel has in one place.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of exposing this old module parameter on the new driver (thus
having to keep it forever after for compatibility), let's confine it
to the old one; if we find later that we need the feature, we ought
to support it properly, with ethtool set-channels.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
EF100 only supports MSI-X, so there's no need for the new driver to
expose this old module parameter.
Since it's now visible to the linker, we have to rename it internally
to efx_interrupt_mode to avoid symbol collisions in non-modular
builds.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All NICs supported by this driver are capable of MSI-X interrupts (only
Falcon A1 wasn't, and that's now hived off into its own driver), so no
need for a nic-type parameter. Besides, the code that checked it was
buggy anyway (the following assignment that checked min_interrupt_mode
overrode it).
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unprivileged functions (such as VFs) may set their MTU by use of the
'control' field of MC_CMD_SET_MAC_EXT, as used in efx_mcdi_set_mtu().
If calling efx_ef10_mac_reconfigure() from efx_change_mtu(), and the
NIC supports the above (SET_MAC_ENHANCED capability), use it rather
than efx_mcdi_set_mac().
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable act is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Have functions that write endpoint configuration registers return
immediately if they are not valid for the direction of transfer for
the endpoint. This allows most of the calls in ipa_endpoint_program()
to be made unconditionally. Reorder the register writes to match
the order of their definition (based on offset).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 4.0+ does not support endpoint suspend. Put a test at
the top of ipa_endpoint_program_suspend() that returns immediately
if suspend is not supported rather than making that check in the caller.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 3.5.1 has a hardware quirk that requires special
handling if an RX endpoint is suspended while aggregation is active.
This handling is implemented by ipa_endpoint_suspend_aggr().
Have ipa_endpoint_program_suspend() be responsible for calling
ipa_endpoint_suspend_aggr() if suspend mode is being enabled on
an endpoint. If the endpoint does not support aggregation, or if
aggregation isn't active, this call will continue to have no effect.
Move the definition of ipa_endpoint_suspend_aggr() up in the file so
its definition precedes the new earlier reference to it. This
requires ipa_endpoint_aggr_active() and ipa_endpoint_force_close()
to be moved as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 4.2 has a hardware quirk that affects endpoint delay
mode, so it isn't used there. Isolate the test that avoids using
delay mode for that version inside ipa_endpoint_program_delay(),
rather than making that check in the caller.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of ports is incorrectly set to the maximum available for a DSA
switch. Even if the extra ports are not used, this causes some functions
to be called later, like port_disable() and port_stp_state_set(). If the
driver doesn't check the port index, it will end up modifying unknown
registers.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain configurations without power management support, the
following warnings happen:
drivers/net/ethernet/mellanox/mlx4/main.c:4388:12:
warning: 'mlx4_resume' defined but not used [-Wunused-function]
4388 | static int mlx4_resume(struct device *dev_d)
| ^~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx4/main.c:4373:12: warning:
'mlx4_suspend' defined but not used [-Wunused-function]
4373 | static int mlx4_suspend(struct device *dev_d)
| ^~~~~~~~~~~~
Mark these functions as __maybe_unused to make it clear to the
compiler that this is going to happen based on the configuration,
which is the standard for these types of functions.
Fixes: 0e3e206a3e ("mlx4: use generic power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain configurations without power management support, gcc report
the following warning:
drivers/net/ethernet/micrel/ksz884x.c:7182:12: warning:
'pcidev_suspend' defined but not used [-Wunused-function]
7182 | static int pcidev_suspend(struct device *dev_d)
| ^~~~~~~~~~~~~~
Mark pcidev_suspend() as __maybe_unused to make it clear.
Fixes: 64120615d1 ("ksz884x: use generic power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove is_udp variable that is used in only one place and use
ip_hdr(skb)->protocol == IPPROTO_UDP check instead.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bit 0 of queue_mask is set at the beginning of
macb_probe_queues() function. Do not set it again after reading
DGFG6 but instead use "|=" operator.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is an immutable branch shared between wireless-drivers-next and
staging-next for moving wilc1000 driver out of staging to drivers/net/wireless
directory.
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI,
I²C or MDIO (very limited and not supported by this driver). While there
is already a compatible entry for the SPI bus, it was missing for I²C.
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2020-07-01
This series contains updates to all Intel drivers, but a majority of the
changes are to the i40e driver.
Jeff converts 'fall through' comments to the 'fallthrough;' keyword for
all Intel drivers. Removed unnecessary delay in the ixgbe ethtool
diagnostics test.
Arkadiusz implements Total Port Shutdown for i40e. This is the revised
patch based on Jakub's feedback from an earlier submission of this
patch, where additional code comments and description was needed to
describe the functionality.
Wei Yongjun fixes return error code for iavf_init_get_resources().
Magnus optimizes XDP code in i40e; starting with AF_XDP zero-copy
transmit completion path. Then by only executing a division when
necessary in the napi_poll data path. Move the check for transmit ring
full outside the send loop to increase performance.
Ciara add XDP ring statistics to i40e and the ability to dump these
statistics and descriptors.
Tony fixes reporting iavf statistics.
Radoslaw adds support for 2.5 and 5 Gbps by implementing the newer ethtool
ksettings API in ixgbe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2020-07-01
This series contains updates to the ice driver only.
Jacob implements a devlink region for device capabilities.
Bruce removes structs containing only one-element arrays that are either
unused or only used for indexing. Instead, use pointer arithmetic or
other indexing to access the elements. Converts "C struct hack"
variable-length types to the preferred C99 flexible array member.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the pre-C90-extension "C struct hack" method (using a single-
element array at the end of a structure for implementing variable-length
types) to the preferred use of C99 flexible array member.
Additional code cleanups were done near areas affected by this change.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are a number of structures that consist of a one-element array as the
only struct member. Some of those are unused so remove them. Others are
used to index into a buffer/array consisting of a variable number of a
different data or structure type. Those are unnecessary since we can use
simple pointer arithmetic or index directly into the buffer to access
individual elements of the buffer/array.
Additional code cleanups were done near areas affected by this change.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
At the moment, bonding xfrm crypto offload can only be set up if the bonding
module is loaded with active-backup mode already set. We need to be able to
make this work with bonds set to AB after the bonding driver has already
been loaded.
So what's done here is:
1) move #define BOND_XFRM_FEATURES to net/bonding.h so it can be used
by both bond_main.c and bond_options.c
2) set BOND_XFRM_FEATURES in bond_dev->hw_features universally, rather than
only when loading in AB mode
3) wire up xfrmdev_ops universally too
4) disable BOND_XFRM_FEATURES in bond_dev->features if not AB
5) exit early (non-AB case) from bond_ipsec_offload_ok, to prevent a
performance hit from traversing into the underlying drivers
5) toggle BOND_XFRM_FEATURES in bond_dev->wanted_features and call
netdev_change_features() from bond_option_mode_set()
In my local testing, I can change bonding modes back and forth on the fly,
have hardware offload work when I'm in AB, and see no performance penalty
to non-AB software encryption, despite having xfrm bits all wired up for
all modes now.
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Reported-by: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new devlink region used for capturing a snapshot of the device
capabilities buffer which is reported by the firmware over the AdminQ.
This information can useful in debugging driver and firmware
interactions.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The convention throughout the IPA driver is to directly use
single-bit field mask values, rather than using (for example)
u32_encode_bits() to set or clear them.
Fix the one place that doesn't follow that convention, which sets
HOL_BLOCK_EN_FMASK in ipa_endpoint_init_hol_block_enable().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A handful of registers are valid only for RX endpoints, and some
others are valid only for TX endpoints. For these endpoints, add
a comment above their defined offset macro that indicates the
endpoints to which they apply.
Extend the endpoint parameter naming convention as well, to make
these constraints more explicit.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The INIT_MODE endpoint configuration register is only valid for TX
endpoints. Rather than writing a zero to that register for RX
endpoints, avoid writing the register at all.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The INIT_HDR_METADATA_MASK endpoint configuration register is only
valid for RX endpoints. Rather than writing a zero to that register
for TX endpoints, avoid writing the register at all.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The INIT_HOL_BLOCK_EN and INIT_HOL_BLOCK_TIMER endpoint registers
are only valid for RX endpoints.
Have ipa_endpoint_modem_hol_block_clear_all() skip writing these
registers for TX endpoints.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The microcontroller shared memory area is at the beginning of the
IPA resident memory. IPA_MEM_UC_OFFSET was defined as the offset
within that region where it's found, but it's 0, and it's never
actually used. Just get rid of the definition, and move some of the
description it had to be above the definition of the ipa_uc_mem_area
structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make minor updates to error messages reported in "gsi.c":
- Use local variables to reduce multi-line function calls
- Don't use parentheses in messages
- Do some slight rewording in a few cases
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We check the state of an event ring or channel both before and after
any GSI command issued that will change that state. In most--but
not all--cases, if the state is something different than expected we
report an error message.
Add error messages where missing, so that all unexpected states
provide information about what went wrong. Drop the parentheses
around the state value shown in all cases.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the "limit" local variable in ipa_endpoint_init_aggr() when
setting the aggregation size limit. Simple cleanup.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Halve the time limit used when aggregation is enabled on an RX
endpoint, to half a millisecond.
Use DIV_ROUND_CLOSEST() to compute the value that represents the
time period, to get better accuracy in the event the time limit is
not an even multiple of the granularity.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timer used for aggregation makes use of an internal 32 KHz clock.
The granularity of the timer is programmed by a field whose value is
computed by ipa_aggr_granularity_val(). Redefine the way that value
is computed by using a new TIMER_FREQUENCY constant representing the
underlying clock frequency.
Add two BUILD_BUG_ON() calls to ensure the value used is valid.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
the patch basically adds the offset adjustment and netfront
state reading to make XDP work on netfront side.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds a basic XDP processing to xen-netfront driver.
We ran an XDP program for an RX response received from netback
driver. Also we request xen-netback to adjust data offset for
bpf_xdp_adjust_head() header space for custom headers.
synchronization between frontend and backend parts is done
by using xenbus state switching:
Reconfiguring -> Reconfigured- > Connected
UDP packets drop rate using xdp program is around 310 kpps
using ./pktgen_sample04_many_flows.sh and 160 kpps without the patch.
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added full support for new version Ethtool API. New API allow use
2500Gbase-T and 5000base-T supported and advertised link speed modes.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
