This uses backlight_device_set_brightness() to set the brightness
level requested via ATIF.
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes warning because pipe is unsigned long and can never be negtative
vers/gpu/drm/radeon/radeon_kms.c:831:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (pipe < 0 || pipe >= rdev->num_crtc) {
drivers/gpu/drm/radeon/radeon_kms.c:857:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (pipe < 0 || pipe >= rdev->num_crtc) {
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenTao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building with Clang:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4160:53: warning: overflow in
expression; result is -294967296 with type 'long' [-Winteger-overflow]
expires = ktime_get_mono_fast_ns() + NSEC_PER_SEC * 4L;
^
1 warning generated.
Multiplication happens first due to order of operations and both
NSEC_PER_SEC and 4 are long literals so the expression overflows. To
avoid this, make 4 an unsigned long long literal, which matches the
type of expires (u64).
Fixes: 3f12acc8d6 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Link: https://github.com/ClangBuiltLinux/linux/issues/1017
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Make a separation of what belongs in the differen dmub
headers
dmub_srv.h is for exposing dmub srv interface to rest of
driver.
other headers inside dmub/inc exposes cmds and definitions
that are owned by the firmware
[How]
keep firmware owned definitions in dmub/inc
move stuff that is purely driver interface headers to dmub/
since those are interface calls that are defined for rest of
driver to use
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
During hotplug, a DP port may be connected to the sink through
passive adapter which does not support DPCD reads. Issuing reads
without checking for this condition will result in errors
[how]
Ensure the link is in aux_mode before initiating operation that result
in a DPCD read.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Want to make use of detile buffer of all 4 pipes to maximize amount of
data stored to hide certain memory latency cases.
[How]
In case of 1 plane and 1 stream, program 4 pipes to each retrieve 1/4 of
plane later mixed together by the MPCs. Added support for transition
from 4 to 1 MPC to 2 to 1 MPC or no pipe split case and vice versa.
Currently, only enabled if debug flag is set.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
same with CL#1711022(correcting yuv420 black color in function dcn10_blank_pixel_data,program_scaler),
yuv420 black color also needs to be correct when enabling HDMI stream at the resume procedure.
[How]
correcting the yuv420 black color according to the way how 420 is packed :2 channels carry Y component,
1 channel alternate between Cb and Cr.
Signed-off-by: yanyan kang <Yanyan.Kang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For a type like PSR version, it makes sense for most of the code
to include a dc type, instead of having this a fw type define since
this is a capability and type exposed by dc.
Especially if it doesn't even need to communicate with the fw.
The code that is packing the firmware command message
should be the one who needs to translate the psr version
into a command that the firmware understands.
[How]
Add a dc_psr_version enum.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
in Is_Support function, driver report different caps between
same timing but different scaling cause OS inconsistent.
[How]
min_row_time is a local that’s only used for verifying immediate
flip support. Clamp the vratio used for its calculation to 1.0.
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain display configurations we want to allow PSTATE
switch when one display can switch in VACTIVE and the
other display can switch in VBLANK
[How]
Add extra condition to dcn2 pstate support check
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
What a mode change is requested for the same timing a full stream reset
can occur in some cases which causes monitor to blank for a few seconds.
[How]
Do not consider infoframe updates as needing a full stream reset as they
will be handled on the first flip after a modeset when surface
information is available.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
There is a problem in hscale_pixel_rate, the bug
causes DCN to be more optimistic (more likely to underflow)
in upscale cases during prefetch.
This commit ports the fix from DV code to address these issues.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1574:5-8: Unneeded
variable: "ret". Return "0" on line 1586
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Userspace can severely fragment rb_hole_addr rbtree by manipulating
alignment while allocating buffers. Fragmented rb_hole_addr rbtree
would result in large delays while allocating buffer object for a
userspace application. It takes long time to find suitable hole
because if we fail to find a suitable hole in the first attempt
then we look for neighbouring nodes using rb_prev()/rb_next().
Traversing rbtree using rb_prev()/rb_next() can take really long
time if the tree is fragmented.
This patch improves searches in fragmented rb_hole_addr rbtree by
modifying it to an augmented rbtree which will store an extra field
in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum
hole size for its subtree in drm_mm_node->subtree_max_hole. Using
drm_mm_node->subtree_max_hole, it is possible to eliminate a complete
subtree if that subtree is unable to serve a request hence reducing
number of rb_prev()/rb_next() used.
With this patch applied, 1 million bo allocs on amdgpu took ~8 sec,
compared to 50k bo allocs which took 28 sec without it.
partial test code:
int test_fragmentation(void)
{
int i = 0;
uint32_t minor_version;
uint32_t major_version;
struct amdgpu_bo_alloc_request request = {};
amdgpu_bo_handle vram_handle[MAX_ALLOC] = {};
amdgpu_device_handle device_handle;
request.alloc_size = 4096;
request.phys_alignment = 8192;
request.preferred_heap = AMDGPU_GEM_DOMAIN_VRAM;
int fd = open("/dev/dri/card0", O_RDWR | O_CLOEXEC);
amdgpu_device_initialize(fd, &major_version, &minor_version,
&device_handle);
for (i = 0; i < MAX_ALLOC; i++) {
amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]);
}
for (i = 0; i < MAX_ALLOC; i++)
amdgpu_bo_free(vram_handle[i]);
return 0;
}
v2:
Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole
v3:
insert_hole_addr() should be static a function
fix return value of next_hole_high_addr()/next_hole_low_addr()
Reported-by: kbuild test robot <lkp@intel.com>
v4:
Fix commit message.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/364341/
Signed-off-by: Christian König <christian.koenig@amd.com>
We need a new PCode request commands and reply codes
to be added as a prepartion patch for QGV points
restricting for new SAGV support.
v2: - Extracted those changes into separate patch
(Ville Syrjälä)
v3: - Moved new PCode masks to another place from
PCode commands(Ville)
v4: - Moved new PCode masks to correspondent PCode
command, with identation(Ville)
- Changed naming to ICL_ instead of GEN11_
to fit more nicely into existing definition
style.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505102247.32452-5-stanislav.lisovskiy@intel.com
The Amlogic S805X/Y uses the same die as the S905X, but with more
limited graphics capabilities.
This adds a soc version detection adding specific limitations on the HDMI
mode selections.
Here, we limit to HDMI 1.2a max HDMI PHY clock frequency.
Changes sinces v1:
- Moved frequency check in the vclk code, and also checks DMT modes
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed commit message with HDMI 1.2a instead of HDMI 1.3a]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428092147.13698-1-narmstrong@baylibre.com
This is a driver for video encoder with VGA and DVI/HDMI outputs.
There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.
Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU. There are probably no distributable
firmware images anyway.
Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk
AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong
colors on the screen. This issue is fixed in PG2 hardware.
The driver currently has code to hide YUV pixel formats from the
userspace. To support PG2, we would need to add code to detect the SoC
version and hide the YUV formats based on that.
However, as PG1 will be phased out and PG2 will be the main platform, a
much simpler solution is just to drop the code in question. The downside
is that the users will be able to use YUV formats on PG1, getting wrong
colors on the screen. On the other hand, that may also be a plus, as the
same applications will now work on PG1 and PG2, even if the colors are
wrong on PG1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429121022.3871-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
If the given videomode does not specify DISPLAY_FLAG_* for the specific
signal property, the driver used a default value. These defaults were
never thought through, as the expectation was that all the DISPLAY_FLAGS
are always set explicitly.
With DRM bridge and panel drivers this is not the case, and while that
issue should be resolved in the future, it's still good to have sane
signal defaults.
This patch changes the defaults to what the hardware has as reset
defaults. Also, based on my experience, I think they make sense and are
more likely correct than the defaults without this patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114151.25843-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
All these ROUNDING_FACTORs and whatnot are making this thing hard to
read. Get rid of them. And let's massage some of the fractions to
give us less questionable intermediate results and perhaps less
divisions.
Also looks like a good helping of 64bit math stuff is needed to
avoid some of overflows present in the current code. There
might still be a few overflows, namely when calculating
link_clks_available/samples_room (would require a huge hblank
though), and potentially when calculating hblank_rise (not sure
how large link_clks_active can get).
It looks like we're still not calculating exactly what the spec says
since we truncate tu_data and tu_line early. But I'm too lazy to
figure out if we could avoid that.
v2: Fix typo in commit msg (Uma)
Remove ROUNDING_FACTOR define (Uma)
s/5*link_clk+5*cdclk/5*(link_clk+cdclk)/ (Chris)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Display WA #1105 says that FBC requires PLANE_STRIDE to be a multiple
of 512 bytes on gen9 and glk.
This is definitely true for glk as certain tests (such as
igt/kms_big_fb/linear-16bpp-rotate-0) are now failing when the
display resolution results in a plane stride which is not a
multiple of 512 bytes.
Curiously I was not able to reproduce this on a KBL. First I
suspected that our use of the FBC override stride explain this,
but after trying to use the override stride on glk the test
still failed. I did try both the old CHICKEN_MISC_4 way and
the new FBC_STRIDE way, neither had any effect on the result.
Anyways, we need this at least on glk. But let's trust the spec
and apply the w/a for all gen9 as well, despite being unable to
reproduce the problem.
v2: s/FBC_CHICKEN/FBC_STRIDE/ in commit msg
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 691f7ba58d ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
We need to calculate SAGV mask also in a non-modeset
commit, however currently active_pipes are only calculated
for modesets in global atomic state, thus now we will be
tracking those also in bw_state in order to be able to
properly access global data.
v2: - Removed pre/post plane SAGV updates from modeset(Ville)
- Now tracking active pipes in intel_can_enable_sagv(Ville)
v3: - lock global state if active_pipes change as well(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430195634.7666-1-stanislav.lisovskiy@intel.com
Future platforms require per-crtc SAGV evaluation
and serializing global state when those are changed
from different commits.
v2: - Add has_sagv check to intel_crtc_can_enable_sagv
so that it sets bit in reject mask.
- Use bw_state in intel_pre/post_plane_enable_sagv
instead of atomic state
v3: - Fixed rebase conflict, now using
intel_atomic_crtc_state_for_each_plane_state in
order to call it from atomic check
v4: - Use fb modifier from plane state
v5: - Make intel_has_sagv static again(Ville)
- Removed unnecessary NULL assignments(Ville)
- Removed unnecessary SAGV debug(Ville)
- Call intel_compute_sagv_mask only for modesets(Ville)
- Serialize global state only if sagv results change, but
not mask itself(Ville)
v6: - use lock global state instead of serialize(Ville)
v7: - use both global state lock and serialize depending on
if we need to change only global state or access hw
(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430191757.18206-1-stanislav.lisovskiy@intel.com
The older arches did not convert MI_STORE_DATA_IMM to using the GTT, but
left them writing to a physical address. The notes suggest that the
primary reason would be so that the writes were cache coherent, as the
CPU cache uses physical tagging. As such we did not implement the
legacy variant of MI_STORE_DATA_IMM and so left all the relocations
synchronous -- but with a small function to convert from the vma address
into the physical address, we can implement asynchronous relocs on these
older arches, fixing up a few tests that require them.
In order to be able to test the legacy paths, refactor the gpu
relocations so that we can hook them up to a selftest.
v2: Use an array of offsets not enum labels for the selftest
v3: Refactor the common igt_hexdump()
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/757
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504140629.28240-1-chris@chris-wilson.co.uk
Older compilers warn about initializers with incorrect curly
braces:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function 'sun6i_dsi_encoder_enable':
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: missing braces around initializer [-Werror=missing-braces]
union phy_configure_opts opts = { 0 };
^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: (near initialization for 'opts.mipi_dphy') [-Werror=missing-braces]
Use the GNU empty initializer extension to avoid this.
Fixes: bb3b6fcb68 ("sun6i: dsi: Convert to generic phy handling")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215105.3928459-1-arnd@arndb.de
