Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask when running on
bcm2711.
Note that, since the prediv configuration bits were re-purposed, this
was triggering miscalculations on all clocks hanging from the VPU clock,
notably the aux UART, making its output unintelligible.
Fixes: 42de9ad400 ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The RaspberryPi4 firmware actually exposes more clocks than are currently
handled by the driver and we will need to change some of them directly
based on the pixel rate for the display related clocks, or the load for the
GPU.
Since the firmware implements DVFS, this rate change can have a number of
side-effects, including adjusting the various PLL voltages or the PLL
parents. The firmware also implements thermal throttling, so even some
thermal pressure can change those parameters behind Linux back.
DVFS is currently implemented on the arm, core, h264, v3d, isp and hevc
clocks, so updating any of them using the MMIO driver (and thus behind the
firmware's back) can lead to troubles, the arm clock obviously being the
most problematic.
In order to make Linux play as nice as possible with those constraints, it
makes sense to rely on the firmware clocks as much as possible. However,
the firmware doesn't seem to provide some equivalents to their MMIO
counterparts, so we can't really replace that driver entirely.
Fortunately, the firmware has an interface to discover the clocks it
exposes.
Let's use it to discover, register the clocks in the clocks framework and
then expose them through the device tree for consumers to use them.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/438d73962741a8c5f7c689319b7443b930a87fde.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bcm2835_debugfs_clock_reg32 is never changed and can therefore be made
const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
26598 16088 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o
After:
text data bss dec hex filename
26662 16024 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lkml.kernel.org/r/20200508220238.4883-1-rikard.falkeborn@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are four different callback functions that are used for the
clk_register callback that all have different second parameter types.
bcm2835_register_pll -> struct bcm2835_pll_data
bcm2835_register_pll_divider -> struct bcm2835_pll_divider_data
bcm2835_register_clock -> struct bcm2835_clock_data
bcm2835_register_date -> struct bcm2835_gate_data
These callbacks are cast to bcm2835_clk_register so that there is no
error about incompatible pointer types. Unfortunately, this is a control
flow integrity violation, which verifies that the callback function's
types match the prototypes exactly before jumping.
[ 0.857913] CFI failure (target: 0xffffff9334a81820):
[ 0.857977] WARNING: CPU: 3 PID: 35 at kernel/cfi.c:29 __cfi_check_fail+0x50/0x58
[ 0.857985] Modules linked in:
[ 0.858007] CPU: 3 PID: 35 Comm: kworker/3:1 Not tainted 4.19.123-v8-01301-gdbb48f16956e4-dirty #1
[ 0.858015] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 0.858031] Workqueue: events 0xffffff9334a925c8
[ 0.858046] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 0.858058] pc : __cfi_check_fail+0x50/0x58
[ 0.858070] lr : __cfi_check_fail+0x50/0x58
[ 0.858078] sp : ffffff800814ba90
[ 0.858086] x29: ffffff800814ba90 x28: 000fffffffdfff3d
[ 0.858101] x27: 00000000002000c2 x26: ffffff93355fdb18
[ 0.858116] x25: 0000000000000000 x24: ffffff9334a81820
[ 0.858131] x23: ffffff93357f3580 x22: ffffff9334af1000
[ 0.858146] x21: a79b57e88f8ebc81 x20: ffffff93357f3580
[ 0.858161] x19: ffffff9334a81820 x18: fffffff679769070
[ 0.858175] x17: 0000000000000000 x16: 0000000000000000
[ 0.858190] x15: 0000000000000004 x14: 000000000000003c
[ 0.858205] x13: 0000000000003044 x12: 0000000000000000
[ 0.858220] x11: b57e91cd641bae00 x10: b57e91cd641bae00
[ 0.858235] x9 : b57e91cd641bae00 x8 : b57e91cd641bae00
[ 0.858250] x7 : 0000000000000000 x6 : ffffff933591d4e5
[ 0.858264] x5 : 0000000000000000 x4 : 0000000000000000
[ 0.858279] x3 : ffffff800814b718 x2 : ffffff9334a84818
[ 0.858293] x1 : ffffff9334bba66c x0 : 0000000000000029
[ 0.858308] Call trace:
[ 0.858321] __cfi_check_fail+0x50/0x58
[ 0.858337] __cfi_check+0x3ab3c/0x4467c
[ 0.858351] bcm2835_clk_probe+0x210/0x2dc
[ 0.858369] platform_drv_probe+0xb0/0xfc
[ 0.858380] really_probe+0x4a0/0x5a8
[ 0.858391] driver_probe_device+0x68/0x104
[ 0.858403] __device_attach_driver+0x100/0x148
[ 0.858418] bus_for_each_drv+0xb0/0x12c
[ 0.858431] __device_attach.llvm.17225159516306086099+0xc0/0x168
[ 0.858443] bus_probe_device+0x44/0xfc
[ 0.858455] deferred_probe_work_func+0xa0/0xe0
[ 0.858472] process_one_work+0x210/0x538
[ 0.858485] worker_thread+0x2e8/0x478
[ 0.858500] kthread+0x154/0x164
[ 0.858515] ret_from_fork+0x10/0x18
To fix this, change the second parameter of all functions void * and use
a local variable with the correct type so that everything works
properly. With this, the only use of bcm2835_clk_register is in struct
bcm2835_clk_desc so we can just remove it and use the type directly.
Fixes: 56eb3a2ed9 ("clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-2-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bcm2835_register_gate is used as a callback for the clk_register member
of bcm2835_clk_desc, which expects a struct clk_hw * return type but
bcm2835_register_gate returns a struct clk *.
This discrepancy is hidden by the fact that bcm2835_register_gate is
cast to the typedef bcm2835_clk_register by the _REGISTER macro. This
turns out to be a control flow integrity violation, which is how this
was noticed.
Change the return type of bcm2835_register_gate to be struct clk_hw *
and use clk_hw_register_gate to do so. This should be a non-functional
change as clk_register_gate calls clk_hw_register_gate anyways but this
is needed to avoid issues with further changes.
Fixes: b19f009d45 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The VPU firmware assume that the PLLD_PER isn't modified by the ARM core.
Otherwise this could cause firmware lookups. So mark the clock as critical
to avoid this.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The new BCM2711 supports an additional clock for the emmc2 block.
So add a new compatible and register this clock only for BCM2711.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
In order to support SoC specific clocks (e.g. emmc2 for BCM2711), we
extend the description with a SoC support flag. This approach avoids long
and mostly redundant lists of clock IDs. Since PLLH is specific to
BCM2835, we register only rest of the clocks as common to all SoC.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
- Support gated clk controller on MIPS based BCM63XX SoCs
- Small frequency support for SiLabs Si544 chips
- Support SiLabs Si5341 and Si5340 chips
* clk-bcm63xx:
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
* clk-silabs:
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
* clk-lochnagar:
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: lochnagar: Use new parent_data approach to register clock parents
* clk-rockchip:
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: rockchip: convert pclk_wdt boilerplat to new SGRF_GATE macro
clk: rockchip: add a type from SGRF-controlled gate clocks
clk: rockchip: Remove 48 MHz PLL rate from rk3288
clk: rockchip: add 1.464GHz cpu-clock rate to rk3228
clk: rockchip: Slightly more accurate math in rockchip_mmc_get_phase()
clk: rockchip: Don't yell about bad mmc phases when getting
clk: rockchip: Use clk_hw_get_rate() in MMC phase calculation
Add a driver for the gated clock controller found on MIPS based BCM63XX
SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[sboyd@kernel.org: Remove module.h include and associated things for a
non-modular driver, add static on data tables, drop of_match_ptr()
usage, fix spdx tag to be a C++ style comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As 'clk-raspberrypi' depends on RPi's firmware interface, which might be
configured as a module, the cpu clock might not be available for the
cpufreq driver during it's init process. So we register the
'raspberrypi-cpufreq' platform device after the probe sequence succeeds.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Raspberry Pi's firmware offers an interface though which update it's
clock's frequencies. This is specially useful in order to change the CPU
clock (pllb_arm) which is 'owned' by the firmware and we're unable to
scale using the register interface provided by clk-bcm2835.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Raspberry Pi's firmware controls this pll, we should use the firmware
interface to access it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation the gpl this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
version 2 gplv2 for more details you should have received a copy of
the gnu general public license version 2 gplv2 along with this
source code
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 16 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARCH_BRCMSTB needs to use the BCM2835 clock driver for chips like
BCM7211 which adopted that clock controller, make that possible and the
driver default to be enabled for ARCH_BRCMSTB.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make the BCM2835 clock driver selectable by other
architectures/platforms. ARCH_BRCMSTB will be selecting that driver in
the next commit since new chips like 7211 use the same CPRMAN clock
controller that this driver supports.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
