The CONFIG_MPU option was only defined on blackfin, and that architecture
is now being removed, so the respective code can be simplified.
A lot of other microcontrollers have an MPU, but I suspect that if we
want to bring that support back, we'd do it differently anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, bpf stackmap store address for each entry in the call trace.
To map these addresses to user space files, it is necessary to maintain
the mapping from these virtual address to symbols in the binary. Usually,
the user space profiler (such as perf) has to scan /proc/pid/maps at the
beginning of profiling, and monitor mmap2() calls afterwards. Given the
cost of maintaining the address map, this solution is not practical for
system wide profiling that is always on.
This patch tries to solve this problem with a variation of stackmap. This
variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing
addresses, the variation stores ELF file build_id + offset.
Build ID is a 20-byte unique identifier for ELF files. The following
command shows the Build ID of /bin/bash:
[user@]$ readelf -n /bin/bash
...
Build ID: XXXXXXXXXX
...
With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID
for each entry in the call trace, and translate it into the following
struct:
struct bpf_stack_build_id_offset {
__s32 status;
unsigned char build_id[BPF_BUILD_ID_SIZE];
union {
__u64 offset;
__u64 ip;
};
};
The search of build_id is limited to the first page of the file, and this
page should be in page cache. Otherwise, we fallback to store ip for this
entry (ip field in struct bpf_stack_build_id_offset). This requires the
build_id to be stored in the first page. A quick survey of binary and
dynamic library files in a few different systems shows that almost all
binary and dynamic library files have build_id in the first page.
Build_id is only meaningful for user stack. If a kernel stack is added to
a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to
only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id
lookup failed for some reason, it will also fallback to store ip.
User space can access struct bpf_stack_build_id_offset with bpf
syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to
maintain mapping from build id to binary files. This mostly static
mapping is much easier to maintain than per process address maps.
Note: Stackmap with build_id only works in non-nmi context at this time.
This is because we need to take mm->mmap_sem for find_vma(). If this
changes, we would like to allow build_id lookup in nmi context.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Al Viro reviewed the filter logic of ftrace trace events and found it to be
very troubling. It creates a binary tree based on the logic operators and
walks it during tracing. He sent myself and Tom Zanussi a long explanation
(and formal proof) of how to do the string parsing better and end up with a
program array that can be simply iterated to come up with the correct
results.
I took his ideas and his pseudo code and rewrote the filter logic based on
them. In doing so, I was able to remove a lot of code, and have a much more
condensed filter logic in the process. I wrote a very long comment
describing the methadology that Al proposed in my own words. For more info
on how this works, read the comment above predicate_parse().
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The pred_funcs_##type arrays consist of five functions that are assigned
based on the ops. The array must be in the same order of the ops each
function represents. The PRED_FUNC_START macro denotes the op enum that
starts the op that maps to the pred_funcs_##type arrays. This is all very
subtle and prone to bugs if the code is changed.
Add comments describing how PRED_FUNC_START and pred_funcs_##type array is
used, and also a PRED_FUNC_MAX that is the maximum number of functions in
the arrays.
Clean up select_comparison_fn() that assigns the predicates to the
pred_funcs_##type array function as well as add protection in case an op is
passed in that does not map correctly to the array.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of having a separate enum that is the index into another array, like
a string array, make a single macro that combines them into a single list,
and then the two can not get out of sync. This makes it easier to add and
remove items.
The macro trick is:
#define DOGS \
C( JACK, "Jack Russell") \
C( ITALIAN, "Italian Greyhound") \
C( GERMAN, "German Shepherd")
#undef C
#define C(a, b) a
enum { DOGS };
#undef C
#define C(a, b) b
static char dogs[] = { DOGS };
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The kbuild test robot reported the following warning on sparc64:
kernel/jump_label.c: In function '__jump_label_update':
kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code);
On sparc64, the jump_label entry->code field is of type u32, but
pointers are 64-bit. Silence the warning by casting entry->code to an
unsigned long before casting it to a pointer. This is also what the
sparc jump label code does.
Fixes: dc1dd184c2 ("jump_label: Warn on failed jump_label patching attempt")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "David S . Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com
Found this by accident.
There are no usages of bare cancel_work() in current kernel source.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized in this function instead.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Problem and motivation: Once a breakpoint perf event (PERF_TYPE_BREAKPOINT)
is created, there is no flexibility to change the breakpoint type
(bp_type), breakpoint address (bp_addr), or breakpoint length (bp_len). The
only option is to close the perf event and configure a new breakpoint
event. This inflexibility has a significant performance overhead. For
example, sampling-based, lightweight performance profilers (and also
concurrency bug detection tools), monitor different addresses for a short
duration using PERF_TYPE_BREAKPOINT and change the address (bp_addr) to
another address or change the kind of breakpoint (bp_type) from "write" to
a "read" or vice-versa or change the length (bp_len) of the address being
monitored. The cost of these modifications is prohibitive since it involves
unmapping the circular buffer associated with the perf event, closing the
perf event, opening another perf event and mmaping another circular buffer.
Solution: The new ioctl flag for perf events,
PERF_EVENT_IOC_MODIFY_ATTRIBUTES, introduced in this patch takes a pointer
to a struct perf_event_attr as an argument to update an old breakpoint
event with new address, type, and size. This facility allows retaining a
previous mmaped perf events ring buffer and avoids having to close and
reopen another perf event.
This patch supports only changing PERF_TYPE_BREAKPOINT event type; future
implementations can extend this feature. The patch replicates some of its
functionality of modify_user_hw_breakpoint() in
kernel/events/hw_breakpoint.c. modify_user_hw_breakpoint cannot be called
directly since perf_event_ctx_lock() is already held in _perf_ioctl().
Evidence: Experiments show that the baseline (not able to modify an already
created breakpoint) costs an order of magnitude (~10x) more than the
suggested optimization (having the ability to dynamically modifying a
configured breakpoint via ioctl). When the breakpoints typically do not
trap, the speedup due to the suggested optimization is ~10x; even when the
breakpoints always trap, the speedup is ~4x due to the suggested
optimization.
Testing: tests posted at
https://github.com/linux-contrib/perf_event_modify_bp demonstrate the
performance significance of this patch. Tests also check the functional
correctness of the patch.
Signed-off-by: Milind Chabbi <chabbi.milind@gmail.com>
[ Using modify_user_hw_breakpoint_check function. ]
[ Reformated PERF_EVENT_IOC_*, so the values are all in one column. ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180312134548.31532-8-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MONOTONIC clock is not fast forwarded by the time spent in suspend on
resume. This is only done for the BOOTTIME clock. The reason why the
MONOTONIC clock is not forwarded is historical: the original Linux
implementation was using jiffies as a base for the MONOTONIC clock and
jiffies have never been advanced after resume.
At some point when timekeeping was unified in the core code, the
MONONOTIC clock was advanced after resume which also advanced jiffies causing
interesting side effects. As a consequence the the MONOTONIC clock forwarding
was disabled again and the BOOTTIME clock was introduced, which allows to read
time since boot.
Back then it was not possible to completely distangle the MONOTONIC clock and
jiffies because there were still interfaces which exposed the MONOTONIC clock
behaviour based on the timer wheel and therefore jiffies.
As of today none of the MONOTONIC clock facilities depends on jiffies
anymore so the forwarding can be done seperately. This is achieved by
forwarding the variables which are used for the jiffies update after resume
before the tick is restarted,
In timekeeping resume, the change is rather simple. Instead of updating the
offset between the MONOTONIC clock and the REALTIME/BOOTTIME clocks, advance the
time keeper base for the MONOTONIC and the MONOTONIC_RAW clocks by the time
spent in suspend.
The MONOTONIC clock is now the same as the BOOTTIME clock and the offset between
the REALTIME and the MONOTONIC clocks is the same as before suspend.
There might be side effects in applications, which rely on the
(unfortunately) well documented behaviour of the MONOTONIC clock, but the
downsides of the existing behaviour are probably worse.
There is one obvious issue. Up to now it was possible to retrieve the time
spent in suspend by observing the delta between the MONOTONIC clock and the
BOOTTIME clock. This is not longer available, but the previously introduced
mechanism to read the active non-suspended monotonic time can mitigate that
in a detectable fashion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.062975504@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since the kprobe which was optimized by jump can not change
the execution path, the kprobe for error-injection must not
be optimized. To prohibit it, set a dummy post-handler as
officially stated in Documentation/kprobes.txt.
Fixes: 4b1a29a7f5 ("error-injection: Support fault injection framework")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Mark reported his arm64 perf fuzzer runs sometimes splat like:
armv8pmu_read_counter+0x1e8/0x2d8
armpmu_event_update+0x8c/0x188
armpmu_read+0xc/0x18
perf_output_read+0x550/0x11e8
perf_event_read_event+0x1d0/0x248
perf_event_exit_task+0x468/0xbb8
do_exit+0x690/0x1310
do_group_exit+0xd0/0x2b0
get_signal+0x2e8/0x17a8
do_signal+0x144/0x4f8
do_notify_resume+0x148/0x1e8
work_pending+0x8/0x14
which asserts that we only call pmu::read() on ACTIVE events.
The above callchain does:
perf_event_exit_task()
perf_event_exit_task_context()
task_ctx_sched_out() // INACTIVE
perf_event_exit_event()
perf_event_set_state(EXIT) // EXIT
sync_child_event()
perf_event_read_event()
perf_output_read()
perf_output_read_group()
leader->pmu->read()
Which results in doing a pmu::read() on an !ACTIVE event.
I _think_ this is 'new' since we added attr.inherit_stat, which added
the perf_event_read_event() to the exit path, without that
perf_event_read_output() would only trigger from samples and for
@event to trigger a sample, it's leader _must_ be ACTIVE too.
Still, adding this check makes it consistent with the @sub case for
the siblings.
Reported-and-Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf updates from Thomas Gleixner:
"Another set of perf updates:
- Fix a Skylake Uncore event format declaration
- Prevent perf pipe mode from crahsing which was caused by a missing
buffer allocation
- Make the perf top popup message which tells the user that it uses
fallback mode on older kernels a debug message.
- Make perf context rescheduling work correcctly
- Robustify the jump error drawing in perf browser mode so it does
not try to create references to NULL initialized offset entries
- Make trigger_on() robust so it does not enable the trigger before
everything is set up correctly to handle it
- Make perf auxtrace respect the --no-itrace option so it does not
try to queue AUX data for decoding.
- Prevent having different number of field separators in CVS output
lines when a counter is not supported.
- Make the perf kallsyms man page usage behave like it does for all
other perf commands.
- Synchronize the kernel headers"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix ctx_event_type in ctx_resched()
perf tools: Fix trigger class trigger_on()
perf auxtrace: Prevent decoding when --no-itrace
perf stat: Fix CVS output format for non-supported counters
tools headers: Sync x86's cpufeatures.h
tools headers: Sync copy of kvm UAPI headers
perf record: Fix crash in pipe mode
perf annotate browser: Be more robust when drawing jump arrows
perf top: Fix annoying fallback message on older kernels
perf kallsyms: Fix the usage on the man page
perf/x86/intel/uncore: Fix Skylake UPI event format
Pull locking fix from Thomas Gleixner:
"rt_mutex_futex_unlock() grew a new irq-off call site, but the function
assumes that its always called from irq enabled context.
Use (un)lock_irqsafe() to handle the new call site correctly"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites
Pull RCU updates from Paul E. McKenney:
- Miscellaneous fixes, perhaps most notably removing obsolete
code whose only purpose in life was to gather information for
the now-removed RCU debugfs facility. Other notable changes
include removing NO_HZ_FULL_ALL in favor of the nohz_full kernel
boot parameter, minor optimizations for expedited grace periods,
some added tracing, creating an RCU-specific workqueue using Tejun's
new WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The replace_filter_string() frees the current string and then copies a given
string. But in the two locations that it was used, the allocation happened
right after the filter was allocated (nothing to replace). There's no need
for this to be a helper function. Embedding the allocation in the two places
where it was called will make changing the code in the future easier.
Also make the variable consistent (always use "filter_string" as the name,
as it was used in one instance as "filter_str")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
replace_system_preds() creates a filter list to free even when it doesn't
really need to have it. Only save filters that require synchronize_sched()
in the filter list to free. This will allow the code to be updated a bit
easier in the future.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The __alloc_filter() function does nothing more that allocate the filter.
There's no reason to have it as a helper function.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The filter code does open code string appending to produce an error message.
Instead it can be simplified by using trace_seq function helpers.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's no reason to BUG if there's a bug in the filtering code. Simply do a
warning and return.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Synthetic events can be done within the recording of other events. Notify
the ring buffer via ring_buffer_nest_start() and ring_buffer_nest_end() that
this is intended and not to block it due to its recursion protection.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
