The check (intval < PAGE_SIZE) will involve type cast, so even when
specifying negative value to rsize/wsize/readdir_max_bytes, it will
pass the validation check successfully.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
On currently logic:
when I specify rasize=0~1 then it will be 4096.
when I specify rasize=2~4097 then it will be 8192.
Make it the same as rsize & wsize.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
KASAN found an UAF in ceph_statfs. This was a one-off bug but looking at
the code it looks like the monmap access needs to be protected as it can
be modified while we're accessing it. Fix this by protecting the access
with the monc->mutex.
BUG: KASAN: use-after-free in ceph_statfs+0x21d/0x2c0
Read of size 8 at addr ffff88006844f2e0 by task trinity-c5/304
CPU: 0 PID: 304 Comm: trinity-c5 Not tainted 4.17.0-rc6+ #172
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xa5/0x11b
? show_regs_print_info+0x5/0x5
? kmsg_dump_rewind+0x118/0x118
? ceph_statfs+0x21d/0x2c0
print_address_description+0x73/0x2b0
? ceph_statfs+0x21d/0x2c0
kasan_report+0x243/0x360
ceph_statfs+0x21d/0x2c0
? ceph_umount_begin+0x80/0x80
? kmem_cache_alloc+0xdf/0x1a0
statfs_by_dentry+0x79/0xb0
vfs_statfs+0x28/0x110
user_statfs+0x8c/0xe0
? vfs_statfs+0x110/0x110
? __fdget_raw+0x10/0x10
__se_sys_statfs+0x5d/0xa0
? user_statfs+0xe0/0xe0
? mutex_unlock+0x1d/0x40
? __x64_sys_statfs+0x20/0x30
do_syscall_64+0xee/0x290
? syscall_return_slowpath+0x1c0/0x1c0
? page_fault+0x1e/0x30
? syscall_return_slowpath+0x13c/0x1c0
? prepare_exit_to_usermode+0xdb/0x140
? syscall_trace_enter+0x330/0x330
? __put_user_4+0x1c/0x30
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 130:
__kmalloc+0x124/0x210
ceph_monmap_decode+0x1c1/0x400
dispatch+0x113/0xd20
ceph_con_workfn+0xa7e/0x44e0
process_one_work+0x5f0/0xa30
worker_thread+0x184/0xa70
kthread+0x1a0/0x1c0
ret_from_fork+0x35/0x40
Freed by task 130:
kfree+0xb8/0x210
dispatch+0x15a/0xd20
ceph_con_workfn+0xa7e/0x44e0
process_one_work+0x5f0/0xa30
worker_thread+0x184/0xa70
kthread+0x1a0/0x1c0
ret_from_fork+0x35/0x40
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The intent behind making it a per-request setting was that it would be
set for writes, but not for reads. As it is, the flag is set for all
fs/ceph requests except for pool perm check stat request (technically
a read).
ceph_osdc_abort_on_full() skips reads since the previous commit and
I don't see a use case for marking individual requests.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Pending works hold inode references, which cause "Busy inodes after
unmount" warning.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, calling stat on a cephfs directory returns 1 for st_nlink.
This behaviour has recently changed in the fuse client, as some
applications seem to expect this value to be either 0 (if it's
unlinked) or 2 + number of subdirectories. This behaviour was changed
in the fuse client with commit 67c7e4619188 ("client: use common
interp of st_nlink for dirs").
This patch modifies the kernel client to have a similar behaviour.
Link: https://tracker.ceph.com/issues/23873
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Without these new fields, stale st_size is returned in following
case.
1. MDS modifies a directory
2. MDS issues CEPH_CAP_ANY_SHARED to client
3. The client satifies stat(2) by its cached metadata. set st_size
to "i_files + i_subdirs".
Link: http://tracker.ceph.com/issues/23855
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The data structure includes the versioned feilds of cap message.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In MDS, file/subdir counts of a directory inode are protected by
filelock. In request reply without Fs cap, nfiles/nsubdirs can be
stale.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull misc vfs updates from Al Viro:
"Misc bits and pieces not fitting into anything more specific"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: delete unnecessary assignment in vfs_listxattr
Documentation: filesystems: update filesystem locking documentation
vfs: namei: use path_equal() in follow_dotdot()
fs.h: fix outdated comment about file flags
__inode_security_revalidate() never gets NULL opt_dentry
make xattr_getsecurity() static
vfat: simplify checks in vfat_lookup()
get rid of dead code in d_find_alias()
it's SB_BORN, not MS_BORN...
msdos_rmdir(): kill BS comment
remove rpc_rmdir()
fs: avoid fdput() after failed fdget() in vfs_dedupe_file_range()
Pull rmdir update from Al Viro:
"More shrink_dcache_parent()-related stuff - killing the main source of
potentially contended calls of that on large subtrees"
* 'work.rmdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
rmdir(),rename(): do shrink_dcache_parent() only on success
Again, when revalidating the inode, we don't need to ask for attributes
for which we are authoritative.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow the getattr() callback to check things like whether or not we hold
a delegation so that it can adjust the attributes that it is asking for.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we hold a delegation, we should not need to request attributes such
as the file size or the change attribute. For some servers, avoiding
asking for these unneeded attributes can improve the overall system
performance.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull dcache updates from Al Viro:
"This is the first part of dealing with livelocks etc around
shrink_dcache_parent()."
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
restore cond_resched() in shrink_dcache_parent()
dput(): turn into explicit while() loop
dcache: move cond_resched() into the end of __dentry_kill()
d_walk(): kill 'finish' callback
d_invalidate(): unhash immediately
Pull block updates from Jens Axboe:
- clean up how we pass around gfp_t and
blk_mq_req_flags_t (Christoph)
- prepare us to defer scheduler attach (Christoph)
- clean up drivers handling of bounce buffers (Christoph)
- fix timeout handling corner cases (Christoph/Bart/Keith)
- bcache fixes (Coly)
- prep work for bcachefs and some block layer optimizations (Kent).
- convert users of bio_sets to using embedded structs (Kent).
- fixes for the BFQ io scheduler (Paolo/Davide/Filippo)
- lightnvm fixes and improvements (Matias, with contributions from Hans
and Javier)
- adding discard throttling to blk-wbt (me)
- sbitmap blk-mq-tag handling (me/Omar/Ming).
- remove the sparc jsflash block driver, acked by DaveM.
- Kyber scheduler improvement from Jianchao, making it more friendly
wrt merging.
- conversion of symbolic proc permissions to octal, from Joe Perches.
Previously the block parts were a mix of both.
- nbd fixes (Josef and Kevin Vigor)
- unify how we handle the various kinds of timestamps that the block
core and utility code uses (Omar)
- three NVMe pull requests from Keith and Christoph, bringing AEN to
feature completeness, file backed namespaces, cq/sq lock split, and
various fixes
- various little fixes and improvements all over the map
* tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits)
blk-mq: update nr_requests when switching to 'none' scheduler
block: don't use blocking queue entered for recursive bio submits
dm-crypt: fix warning in shutdown path
lightnvm: pblk: take bitmap alloc. out of critical section
lightnvm: pblk: kick writer on new flush points
lightnvm: pblk: only try to recover lines with written smeta
lightnvm: pblk: remove unnecessary bio_get/put
lightnvm: pblk: add possibility to set write buffer size manually
lightnvm: fix partial read error path
lightnvm: proper error handling for pblk_bio_add_pages
lightnvm: pblk: fix smeta write error path
lightnvm: pblk: garbage collect lines with failed writes
lightnvm: pblk: rework write error recovery path
lightnvm: pblk: remove dead function
lightnvm: pass flag on graceful teardown to targets
lightnvm: pblk: check for chunk size before allocating it
lightnvm: pblk: remove unnecessary argument
lightnvm: pblk: remove unnecessary indirection
lightnvm: pblk: return NVM_ error on failed submission
lightnvm: pblk: warn in case of corrupted write buffer
...
Clean up gfs2_iomap_alloc and gfs2_iomap_get. Document how
gfs2_iomap_alloc works: it now needs to be called separately after
gfs2_iomap_get where necessary; this will be used later by iomap write.
Move gfs2_iomap_ops into bmap.c.
Introduce a new gfs2_iomap_get_alloc helper and use it in
fallocate_chunk: gfs2_iomap_begin will become unsuitable for fallocate
with proper iomap write support.
In gfs2_block_map and fallocate_chunk, zero-initialize struct iomap.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In journaled data mode, we need to add each buffer head to the current
transaction. In ordered write mode, we only need to add the inode to
the ordered inode list. So far, both cases are handled in
gfs2_trans_add_data. This makes the code look misleading and is
inefficient for small block sizes as well. Handle both cases separately
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
First, change the sanity check in gfs2_stuffed_write_end to check for
the actual write size instead of the requested write size.
Second, use the existing teardown code in gfs2_write_end instead of
duplicating it in gfs2_stuffed_write_end.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reimplement function hole_size based on a generic function for walking
the metadata tree and rename hole_size to gfs2_hole_size. While
previously, multiple invocations of hole_size were sometimes needed to
walk across the entire hole, the new implementation always returns the
entire hole at once (provided that the caller is interested in the total
size).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function gfs2_free_extlen calculates the length of an extent of
free blocks that may be reserved. The end pointer was calculated as
end = start + bh->b_size but b_size is incorrect because the
bitmap usually stops prior to the end of the buffer data on
the last bitmap.
What this means is that when you do a write, you can reserve a
chunk of blocks that runs off the end of the last bitmap. For
example, I've got a file system where there is only one bitmap
for each rgrp, so ri_length==1. I saw cases in which iozone
tried to do a big write, grabbed a large block reservation,
chose rgrp 5464152, which has ri_data0 5464153 and ri_data 8188.
So 5464153 + 8188 = 5472341 which is the end of the rgrp.
When it grabbed a reservation it got back: 5470936, length 7229.
But 5470936 + 7229 = 5478165. So the reservation starts inside
the rgrp but runs 5824 blocks past the end of the bitmap.
This patch fixes the calculation so it won't exceed the last
bitmap. It also adds a BUG_ON to guard against overflows in the
future.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch function gfs2_write_begin, upon discovering an
error, called gfs2_trim_blocks while the rgrp glock was still held.
That's because gfs2_inplace_release is not called until later.
This patch reorganizes the logic a bit so gfs2_inplace_release
is called to release the lock prior to the call to gfs2_trim_blocks,
thus preventing the glock recursion.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The heads of tha AGI unlinked list are only scanned on debug
kernels when the verifier runs. Change that to always scan the heads
and validate that the inode numbers are valid.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull vfs fixes from Al Viro.
- fix io_destroy()/aio_complete() race
- the vfs_open() change to get rid of open_check_o_direct() boilerplate
was nice, but buggy. Al has a patch avoiding a revert, but that's
definitely not a last-day fodder, so for now revert it is...
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Revert "fs: fold open_check_o_direct into do_dentry_open"
fix io_destroy()/aio_complete() race
This reverts commit cab64df194.
Having vfs_open() in some cases drop the reference to
struct file combined with
error = vfs_open(path, f, cred);
if (error) {
put_filp(f);
return ERR_PTR(error);
}
return f;
is flat-out wrong. It used to be
error = vfs_open(path, f, cred);
if (!error) {
/* from now on we need fput() to dispose of f */
error = open_check_o_direct(f);
if (error) {
fput(f);
f = ERR_PTR(error);
}
} else {
put_filp(f);
f = ERR_PTR(error);
}
and sure, having that open_check_o_direct() boilerplate gotten rid of is
nice, but not that way...
Worse, another call chain (via finish_open()) is FUBAR now wrt
FILE_OPENED handling - in that case we get error returned, with file
already hit by fput() *AND* FILE_OPENED not set. Guess what happens in
path_openat(), when it hits
if (!(opened & FILE_OPENED)) {
BUG_ON(!error);
put_filp(file);
}
The root cause of all that crap is that the callers of do_dentry_open()
have no way to tell which way did it fail; while that could be fixed up
(by passing something like int *opened to do_dentry_open() and have it
marked if we'd called ->open()), it's probably much too late in the
cycle to do so right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
It does not return an error, so we don't need to check the return value
for IS_ERR(). Indeed, it is a bug to do so; with a sufficiently large
PFN, a legitimate DAX entry may be mistaken for an error return.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a function to allocate wdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages that
point to the data buffer to write to.
wdata is reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
With offset defined in rdata, transport functions need to look at this
offset when reading data into the correct places in pages.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add a function to allocate rdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages
that point to the data buffer.
rdata is still reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull rdma fixes from Jason Gunthorpe:
"Just three small last minute regressions that were found in the last
week. The Broadcom fix is a bit big for rc7, but since it is fixing
driver crash regressions that were merged via netdev into rc1, I am
sending it.
- bnxt netdev changes merged this cycle caused the bnxt RDMA driver
to crash under certain situations
- Arnd found (several, unfortunately) kconfig problems with the
patches adding INFINIBAND_ADDR_TRANS. Reverting this last part,
will fix it more fully outside -rc.
- Subtle change in error code for a uapi function caused breakage in
userspace. This was bug was subtly introduced cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/core: Fix error code for invalid GID entry
IB: Revert "remove redundant INFINIBAND kconfig dependencies"
RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes
We only call into this function through the iomap iterators, so we already
know the buffer is unwritten. In addition to that we always require the
uptodate flag that is ORed with the result anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This function is only used by the iomap code, depends on being called
from it, and will soon stop poking into buffer head internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Switch to the iomap based bmap implementation to get rid of one of the
last users of xfs_get_blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This adds a simple iomap-based implementation of the legacy ->bmap
interface. Note that we can't easily add checks for rt or reflink
files, so these will have to remain in the callers. This interface
just needs to die..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor the repeated calculation of the on-disk sector for a given logical
block into a littler helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
