The current mpcc insert/remove logic does not support updating
only a single mpcc. So when pixel alpha changed but no full update
we can mistakenly shuffle the mpcc layering order. With this change
we will only insert/remove mpcc if there is full update.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Registers are added and defined.
Programmed to default values.
Stutter level watermark register is being set to calculated value.
Urgent level registers are programmed to the same as urgency.
The programming of the registers is not expected to have any
functional difference in performance.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using the three functions we can print the dceip, vbios and data struct
for bandwidth calculations. This is useful for debugging bandwidth
calculation issues without a debugger
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't attempt to read EDID in atomic_check. We really shouldn't
even be modifying the connector object, or any other non-state object,
but this is a start at least.
Moving EDID cleanup to dm_dp_mst_connector_destroy from
dm_dp_destroy_mst_connector to ensure the EDID is still available for
headless mode.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some DP panel not detected intermittently due to read dpcd
caps failed when doing hot plug.
[root cause] DC_HPD_CONNECT_INT_DELAY is set to 0, not delay
after HPD toggle and read dpcd data, while some panel need 4ms defer
to read.
[solution] Add a retry when read failed.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can refine our current execlists->queue_priority if we inspect
ELSP[1] rather than the head of the unsubmitted queue. Currently, we use
the unsubmitted queue and say that if a subsequent request is more
important than the current queue, we will rerun the submission tasklet
to evaluate the need for preemption. However, we only want to preempt if
we need to jump ahead of a currently executing request in ELSP. The
second reason for running the submission tasklet is amalgamate requests
into the active context on ELSP[0] to avoid a stall when ELSP[0] drains.
(Though repeatedly amalgamating requests into the active context and
triggering many lite-restore is off question gain, the goal really is to
put a context into ELSP[1] to cover the interrupt.) So if instead of
looking at the head of the queue, we look at the context in ELSP[1] we
can answer both of the questions more accurately -- we don't need to
rerun the submission tasklet unless our new request is important enough
to feed into, at least, ELSP[1].
v2: Add some comments from the discussion with Tvrtko.
v3: More commentary to cross-reference queue_request()
References: f6322eddaf ("drm/i915/preemption: Allow preemption between submission ports")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411103929.27374-1-chris@chris-wilson.co.uk
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests
on some CI machines I have concluded that: a) the PMU readout of RC6 can
race against runtime PM transitions, and b) there are other reasons than
being runtime suspended which can cause intel_runtime_pm_get_if_in_use to
fail.
Therefore when estimating RC6 the code needs to assert we are indeed in
suspended state, and if not, the best we can do is return the last known
RC6 value.
Without this check we can calculate the estimated value based on un-
initialized or inappropriate internal state, which can result in over-
estimation, or in any case incorrect value being returned.
v2:
* Re-arrange the code a bit to avoid second unlock and return branch.
(Chris Wilson)
v3:
* Insert some strategic blank lines and improve commit msg.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1fe699e301 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410112704.24462-1-tvrtko.ursulin@linux.intel.com
The error exit path when a duplicate is found does not kfree and cmd_entry
struct and hence there is a small memory leak. Fix this by kfree'ing it.
Detected by CoverityScan, CID#1370198 ("Resource Leak")
Fixes: be1da7070a ("drm/i915/gvt: vGPU command scanner")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
* Report 64-bit doorbells as HSA_CAP_DOORBELL_TYPE_2_0 in topology
* Report cache information in topology (duplicates GFXv8 info for now)
* Add device info for Vega10 support in KFD
Raven is not enabled at this time as it needs additional changes in
DQM to work with a single SDMA engine.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Report failure to enable atomics only on GPUs that require them.
This allows GPUs that don't require atomics to function, but can
benefit if they are available. This is the case for Vega10, which
doesn't use atomics for basic functioning of the MEC, AQL and HWS
microcode. So it can work without atomics. But shader programs can
still use atomic instructions on systems that support PCIe atomics.
Signed-off-by: welu <Wei.Lu2@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Pull remoteproc updates from Bjorn Andersson:
- add support for generating coredumps for remoteprocs using
devcoredump
- add the Qualcomm sysmon driver for intra-remoteproc crash handling
- a number of fixes in Qualcomm and IMX drivers
* tag 'rproc-v4.17' of git://github.com/andersson/remoteproc:
remoteproc: fix null pointer dereference on glink only platforms
soc: qcom: qmi: add CONFIG_NET dependency
remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()'
remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()'
remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'
samples: Introduce Qualcomm QMI sample client
remoteproc: qcom: Introduce sysmon
remoteproc: Pass type of shutdown to subdev remove
remoteproc: qcom: Register segments for core dump
soc: qcom: mdt-loader: Return relocation base
remoteproc: Rename "load_rsc_table" to "parse_fw"
remoteproc: Add remote processor coredump support
remoteproc: Remove null character write of shared mem
%phn is not a valid specifier, and the trailing 'n' is being eaten by
the format-specifier and defaulting to the ' ' separator. Avoid angering
smatch by using the unknown specifier, and use the default we expect.
drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:669 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:679 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:693 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:707 ct_handle_response() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:727 ct_process_request() warn: '%ph' cannot be followed by 'n'
drivers/gpu/drm/i915/intel_guc_ct.c:803 ct_handle_request() warn: '%ph' cannot be followed by 'n'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410111417.27563-1-chris@chris-wilson.co.uk
Resetting the GPU doesn't affect the RPS/RC6 state, so we can stop
forcibly reloading the registers.
Ville suggested this many moons ago, I said at that time that sanitizing
was no harm and meant that our bookkeeping was kept consistent with the
HW. However, in a forthcoming series, we want to split rps/rc6 GT
powermanagement and one of the key simplifications is the control of
when we enable it. Performing a crude sanitize in the middle of
i915_gem_reset() is then a huge wart.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410133354.13425-1-chris@chris-wilson.co.uk
This patch updates scaler max limit support for NV12
v2: Rebased (me)
v3: Rebased (me)
v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made
less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series
v6: Rebased (me)
Fixed review comments from Paauwe, Bob J
Previous version, where a split of calculation
was done, was wrong. Fixed that issue here.
v7: Rebased (me)
v8: Rebased (me)
v9: Rebased (me)
v10: Rebased (me)
v11: Addressed review comments from Shashank Sharma
Alignment issues fixed.
When call to skl_update_scaler is made, 0 was being
sent instead of pixel_format.
When crtc update scaler is called, we dont have the
fb to derive the pixel format. Added the function
parameter bool plane_scaler_check to account for this.
v12: Fixed failure in IGT debugfs_test.
fb is NULL in skl_update_scaler_plane
Due to this, accessing fb->format caused failure.
Patch checks fb before using.
v13: In the previous version there was a flaw.
In skl_update_scaler during plane_scaler_check
if the format was non-NV12, it would set need_scaling
to false. This could reset the previously set need_scaling
from a previous condition check. Patch fixes this.
Patch also adds minimum src height for YUV 420 formats
to 16 (as defined in BSpec) and adds for checking this
range.
v14: Addressed review comments from Maarten
Just add a check for NV12 min src height in
skl_update_scaler and retain the remaining checks
as is. Added Reviewed By from Juha-Pekka Heikkila.
v15: Rebased the series.
v16: Changed fb height restriction to be >= 16 as per
Bspec. Earlier it was > 16.
v17: Adding src width and height to be mult of 4 restriction
to avoid pipe fifo underruns for NV12.
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-15-git-send-email-vidya.srinivas@intel.com
This patch adds NV12 to format_is_yuv() function
for sprite planes.
v2:
-Use intel_ prefix for format_is_yuv (Ville)
v3: Rebased (me)
v4: Rebased and addressed review comments from Clinton A Taylor.
"static function in intel_sprite.c is not available
to the primary plane functions".
Changed commit message - function modified for
sprite planes.
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v6: Rebased (me)
v7: Rebased (me)
v8: Rebased (me)
v9: Rebased (me)
v10: Changed intel_format_is_yuv function from
static to non-static. We need to use it later from
other files for check.
v11: Rebased the patch. format_is_yuv has already
been renamed to intel_format_is_yuv in the color
patch series which is already merged. This function
which was previously static has already been made
non-static. So this patch after rebase just adds
NV12 to intel_format_is_yuv function.
v12: Added reviewed by from Juha-Pekka Heikkila
v13/v14/v15: Rebased the series
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-14-git-send-email-vidya.srinivas@intel.com
This patch sets appropriate scaler mode for NV12 format.
In this mode, skylake scaler does either chroma-upsampling or
chroma-upsampling and resolution scaling
v2: Review comments from Ville addressed
NV12 case to be checked first for setting
the scaler
v3: Rebased (me)
v4: Rebased (me)
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v6: Rebased (me)
v7: Rebased (me)
v8: Rebased (me)
Restricting the NV12 change for scaler to BXT and KBL
in this series.
v9: Rebased (me)
v10: As of now, NV12 has been tested on Gen9 and Gen10. However,
code is applicable to all GEN >= 9. Hence making
that change to keep it generic.
Comments under v8 is not valid anymore.
v11: Addressed review comments by Shashank Sharma.
For Gen10+, the scaler mode to be set it planar or normal
(single bit). Changed the code to be applicable to all
Gen.
v12: Addressed review comments from Shashank Sharma
For Gen9 (apart from GLK) bits 28:29 to be programmed
in PS_CTRL for NV12. For GLK and Gen10+, bit 29 to be set
for all Planar.
v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
Adding Reviewed by tag from Shashank Shamr
v14: Added reviewed by from Juha-Pekka Heikkila
v15: Rebased the series
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-13-git-send-email-vidya.srinivas@intel.com
