To make this change possible we also need to change
dbc_handle_port_status() to take dbc pointer as parameter instead of
xhci_hcd pointer.
Note that xhci_info() used xhci_to_hcd(xhci)->self.controller as the
device while for dev_info we use xhci_to_hcd(xhci)->self.sysdev.
In many cases those are the same, but not for some device where
a dwc3 controller creates a xhci platform device. In th this case
self.controller may be the platform device while self.sysdev is
the actual device known to firmware (dwc3).
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the dbc structure contains a pointer to struct xhci_hcd,
and dbc functions use that to dig up the underlying device pointer.
We are trying to decouple xhci and dbc code, and prepare for
code that use dbc such as dbctty into into real device drivers.
This is one step along the way.
Keep functionality the same and keep the xhci pointer, and
let the new device pointer point to the xhci device for now.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If usb-role-switch is present in the device tree, it means that ID and Vbus
signals are not connected to the OTG controller but to an external
component (GPIOs, Type-C controller). In this configuration, usb role
switch is used to force valid sessions on STM32MP15 SoCs.
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch adds support for usb role switch to dwc2, by using overriding
control of the PHY voltage valid and ID input signals.
iddig signal (ID) can be overridden:
- when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1;
- when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0.
avalid/bvalid/vbusvalid signals can be overridden respectively with:
- GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL
- GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL
- GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL
It is possible to determine valid sessions thanks to usb role switch:
- if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid
- if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid
- if USB_ROLE_HOST then avalid && !bvalid && vbusvalid
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Commit 5c4e8d3781 ("usb: host: xhci-tegra: Add support for XUSB
context save/restore") is using the IPFS 'num_offsets' value when
allocating memory for FPCI context instead of the FPCI 'num_offsets'.
After commit cad064f1bd ("devres: handle zero size in devm_kmalloc()")
was added system suspend started failing on Tegra186. The kernel log
showed that the Tegra XHCI driver was crashing on entry to suspend when
attempting the save the USB context. On Tegra186, the IPFS context has a
zero length but the FPCI content has a non-zero length, and because of
the bug in the Tegra XHCI driver we are incorrectly allocating a zero
length array for the FPCI context. The crash seen on entering suspend
when we attempt to save the FPCI context and following commit
cad064f1bd ("devres: handle zero size in devm_kmalloc()") this now
causes a NULL pointer deference when we access the memory. Fix this by
correcting the amount of memory we are allocating for FPCI contexts.
Cc: stable@vger.kernel.org
Fixes: 5c4e8d3781 ("usb: host: xhci-tegra: Add support for XUSB context save/restore")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OMAP1 OHCI driver is using the legacy GPIO API to grab some
random GPIO lines. One is from the TPS65010 chip and used for
power, another one is for overcurrent and while the driver picks
this line it doesn't watch it at all.
Convert the driver and the OMAP1 OSK board file to pass these
two GPIOs as machine described GPIO descriptors.
I noticed the overcurrent GPIO line is not really used in the
code so dropped in a little comment for other developers.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200720135524.100374-2-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Port starts to toggle when transitioning to unattached state.
This is incorrect while in BIST mode.
6.4.3.1 BIST Carrier Mode
Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object,
the UUT Shall send out a continuous string of BMC encoded alternating "1"s
and “0”s. The UUT Shall exit the Continuous BIST Mode within
tBISTContMode of this Continuous BIST Mode being enabled(see
Section 6.6.7.2).
6.4.3.2 BIST Test Data
Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object,
the UUT Shall return a GoodCRC Message and Shall enter a test mode in which
it sends no further Messages except for GoodCRC Messages in response to
received Messages. See Section 5.9.2 for the definition of the Test Data
Frame. The test Shall be ended by sending Hard Reset Signaling to reset the
UUT.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200716034128.1251728-3-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quoting from TCPCI spec:
"Setting this bit to 1 is intended to be used only when a USB compliance
tester is using USB BIST Test Data to test the PHY layer of the TCPC. The
TCPM should clear this bit when a disconnect is detected.
0: Normal Operation. Incoming messages enabled by RECEIVE_DETECT
passed to TCPM via Alert.
1: BIST Test Mode. Incoming messages enabled by RECEIVE_DETECT
result in GoodCRC response but may not be passed to the TCPM via
Alert."
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200716034128.1251728-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When pmc_usb_mux_set() is invoked when a device is disconnected, a valid
scenario is for state->alt == NULL and state->mode == TYPEC_STATE_USB.
In such cases, if a pmc_usb_disconnect() has already been issued (from
either pmc_usb_set_orientation() when orientation ==
TYPEC_ORIENTATION_NONE, or pmc_usb_set_role() when role ==
USB_ROLE_NONE), a pmc_usb_connect() will be issued despite no peripheral
being present.
This confuses the PMC and leads to all subsequent PMC IPC requests
returning errors due to timeout.
To prevent this, return early if the port orientation or role is already
set to none.
Cc: Benson Leung <bleung@chromium.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Rajmohan Mani <rajmohan.mani@intel.com>
Fixes: f3c1c41ebc ("usb: typec: intel_pmc_mux: Add support for USB4")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20200709002441.1309189-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function quirks_param_set() takes as argument a const char* pointer
to the new value of the usbcore.quirks parameter. It then casts this
pointer to a non-const char* pointer and passes it to the strsep()
function, which overwrites the value.
Fix this by creating a copy of the value using kstrdup() and letting
that copy be written to by strsep().
Fixes: 027bd6cafd ("usb: core: Add "quirks" parameter for usbcore")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:
usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated
The upgrade could complete after running
# echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id
qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The set-led command is eight bytes long and starts with a command byte
followed by six bytes of RGB data and ends with a byte encoding a
frequency (see iuu_led() and iuu_rgbf_fill_buffer()).
The led activity helpers had a few long-standing bugs which corrupted
the command packets by inserting a second command byte and thereby
offsetting the RGB data and dropping the frequency in non-xmas mode.
In xmas mode, a related off-by-one error left the frequency field
uninitialised.
Fixes: 60a8fc0171 ("USB: add iuu_phoenix driver")
Reported-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver would happily overwrite its write buffer with user data in
256 byte increments due to a removed buffer-space sanity check.
Fixes: 5fcf62b0f1 ("tty: iuu_phoenix: fix locking.")
Cc: stable <stable@vger.kernel.org> # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
sisusb_init.h is included by multiple source files, but the big data
tables contained are only referenced by one of them, leaving the tables
'defined but not used' by the remainder. We have a choice to either
place them inside the source file, taking up may lines and potentially
overwhelming the source file OR tuck them away neatly inside their own
headerfile. The latter was chosen.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/usb/misc/sisusbvga/sisusb.c:54:
drivers/usb/misc/sisusbvga/sisusb_init.h:664:34: warning: ‘SiSUSB_VCLKData’ defined but not used [-Wunused-const-variable=]
664 | static const struct SiS_VCLKData SiSUSB_VCLKData[] = {
| ^~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:406:35: warning: ‘SiSUSB_CRT1Table’ defined but not used [-Wunused-const-variable=]
406 | static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = {
| ^~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:348:30: warning: ‘SiSUSB_RefIndex’ defined but not used [-Wunused-const-variable=]
348 | static const struct SiS_Ext2 SiSUSB_RefIndex[] = {
| ^~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:269:29: warning: ‘SiSUSB_EModeIDTable’ defined but not used [-Wunused-const-variable=]
269 | static const struct SiS_Ext SiSUSB_EModeIDTable[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:238:36: warning: ‘SiSUSB_StandTable’ defined but not used [-Wunused-const-variable=]
238 | static const struct SiS_StandTable SiSUSB_StandTable[] = {
| ^~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:201:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=]
201 | static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = {
| ^~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:196:28: warning: ‘SiSUSB_SModeIDTable’ defined but not used [-Wunused-const-variable=]
196 | static const struct SiS_St SiSUSB_SModeIDTable[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:183:28: warning: ‘SiS_VGA_DAC’ defined but not used [-Wunused-const-variable=]
183 | static const unsigned char SiS_VGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:172:28: warning: ‘SiS_EGA_DAC’ defined but not used [-Wunused-const-variable=]
172 | static const unsigned char SiS_EGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:161:28: warning: ‘SiS_CGA_DAC’ defined but not used [-Wunused-const-variable=]
161 | static const unsigned char SiS_CGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:150:28: warning: ‘SiS_MDA_DAC’ defined but not used [-Wunused-const-variable=]
150 | static const unsigned char SiS_MDA_DAC[] = {
| ^~~~~~~~~~~
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are not referenced anywhere in the kernel.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/sisusbvga/sisusb_init.h:171:29: warning: ‘ModeIndex_1280x1024’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:170:29: warning: ‘ModeIndex_1280x768’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:169:29: warning: ‘ModeIndex_1280x720’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:168:29: warning: ‘ModeIndex_1152x864’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:167:29: warning: ‘ModeIndex_1024x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:166:29: warning: ‘ModeIndex_1024x768’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:165:29: warning: ‘ModeIndex_960x600’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:164:29: warning: ‘ModeIndex_960x540’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:163:29: warning: ‘ModeIndex_856x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:162:29: warning: ‘ModeIndex_848x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:161:29: warning: ‘ModeIndex_800x600’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:160:29: warning: ‘ModeIndex_800x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:159:29: warning: ‘ModeIndex_768x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:158:29: warning: ‘ModeIndex_720x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:157:29: warning: ‘ModeIndex_720x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:156:29: warning: ‘ModeIndex_640x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:155:29: warning: ‘ModeIndex_640x400’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:154:29: warning: ‘ModeIndex_512x384’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:153:29: warning: ‘ModeIndex_400x300’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:152:29: warning: ‘ModeIndex_320x240’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:151:29: warning: ‘ModeIndex_320x200’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:232:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=]
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'sie' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'int_status' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'msg' not described in 'c67x00_hcd_irq'
drivers/usb/c67x00/c67x00-hcd.c:267: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_start'
drivers/usb/c67x00/c67x00-hcd.c:279: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_stop'
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ec1f9d9f01 ("usb: dwc2: gadget: parity fix in isochronous mode") moved
these checks to dwc2_hsotg_change_ep_iso_parity() back in 2015. The assigned
value hasn't been read back since. Let's remove the unnecessary H/W read.
Fixes the following W=1 warning:
drivers/usb/dwc2/gadget.c: In function ‘dwc2_hsotg_epint’:
drivers/usb/dwc2/gadget.c:2981:6: warning: variable ‘ctrl’ set but not used [-Wunused-but-set-variable]
2981 | u32 ctrl;
| ^~~~
Cc: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20200715093209.3165641-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value obtained from GINTSTS2 should be masked with the GINTMSK2
value. Looks like this has been broken since
dwc2_gadget_wkup_alert_handler() was added back in 2018.
Also fixes the following W=1 warning:
drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_wkup_alert_handler’:
drivers/usb/dwc2/gadget.c:259:6: warning: variable ‘gintmsk2’ set but not used [-Wunused-but-set-variable]
259 | u32 gintmsk2;
| ^~~~~~~~
Cc: Ben Dooks <ben@simtec.co.uk>
Fixes: 187c5298a1 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20200715093209.3165641-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200710190919.31464-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200710191842.32561-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200711135804.19735-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200711135813.19798-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200711135825.19862-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
